NODESTREAM FLEX Remote Operations Enablement Decoder

Waca pandhuan kasebut kanthi teliti sadurunge nggunakake produk iki

Informasi kanggo keamanan sampeyan
Piranti kasebut mung kudu dilayani lan dijaga dening personel layanan sing mumpuni. Karya ndandani sing ora bener bisa mbebayani. Aja nyoba kanggo layanan produk iki dhewe. TampYen nganggo piranti iki bisa nyebabake ciloko, geni, utawa kejut listrik, lan bakal ngilangi garansi sampeyan.

Pesthekake nggunakake sumber daya sing ditemtokake kanggo piranti kasebut. Sambungan menyang sumber daya sing ora bener bisa nyebabake geni utawa kejut listrik.

Safety Operasi

Sadurunge nggunakake produk, priksa manawa kabeh kabel ora rusak lan disambungake kanthi bener. Yen sampeyan ngelingi karusakan, hubungi tim dhukungan langsung.

• Kanggo ngindhari sirkuit cendhak, adohake barang logam utawa statis saka piranti.
• Aja lebu, asor, lan suhu sing ekstrem. Aja nyelehake produk ing wilayah sing udan dadi udan.
• Suhu lan kelembapan lingkungan operasi:
  • Suhu:
  • Operasi: 0 ° C nganti 35 ° C
  • Storage: 0°C to 65°
  • Kelembapan (non-condensing):
  • Operasi: 0% nganti 90%
  • Panyimpenan: 0% nganti 90%
• Copot piranti saka stopkontak sadurunge ngresiki. Aja nggunakake pembersih cair utawa aerosol.
• Hubungi tim dhukungan support@harvest-tech.com.au yen sampeyan nemoni masalah teknis karo produk.

Simbol-simbol

• Kontak lan Dhukungan support@harvest-tech.com.au
• Harvest Technology Pty Ltd
  7 Turner Avenue, Technology Park Bentley, WA 6102, Australia harvest. technology

Penafian lan Hak Cipta

Nalika Harvest Technology bakal ngupayakake supaya informasi ing pandhuan pangguna iki dianyari, Harvest Technology ora menehi perwakilan utawa jaminan apa wae, nyata utawa diwenehake babagan kelengkapan, akurasi, linuwih, kesesuaian utawa kasedhiyan babagan pandhuan pangguna utawa informasi, produk, layanan utawa grafis sing ana gandhengane sing ana ing pandhuan pangguna, website or any other media for any purpose.

The information contained in this document is believed to be accurate at the time of release, however, Harvest Technology cannot assume responsibility for any consequences resulting from the use thereof.

Harvest Technology nduweni hak kanggo ngowahi samubarang produk lan dokumentasi sing gegandhengan kapan wae tanpa kabar. Harvest Technology ora tanggung jawab utawa tanggung jawab sing muncul saka aplikasi utawa panggunaan produk utawa dokumentasi sing ana gandhengane.

Any decisions you make after reading the user guide or other material are your responsibility and Harvest Technology cannot be held liable for anything you choose to do.

Sembarang ketergantungan sing sampeyan gunakake ing materi kasebut pancen tanggung jawab sampeyan dhewe.

Harvest Technology products, including all hardware, software and associated documentation, are subject to international copyright laws. The purchase of, or use of this product, conveys a license under any patent rights, copyrights, trademark rights, or any other intellectual property rights from Harvest Technology.

Garansi

• Garansi kanggo produk iki bisa ditemokake online ing:
  https://harvest.technology/terms-and-conditions/

Pranyatan Kepatuhan FCC

CATETAN: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the user manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To maintain compliance with compliance regulations, shielded HDMI cables must be used with this equipment

Pernyataan Kepatuhan CE/UKCA

Tandha kanthi simbol (CE) lan (UKCA) nuduhake kepatuhan piranti iki karo arahan sing ditrapake saka Komunitas Eropa lan tundhuk utawa ngluwihi standar teknis ing ngisor iki.

• Directive 2014/30/EU – Kompatibilitas elektromagnetik
• Arahan 2011/65/EU - RoHS, Watesan panggunaan bahan-bahan mbebayani tartamtu ing peralatan listrik lan elektronik

Pènget: Operasi peralatan iki ora dimaksudake kanggo lingkungan omah lan bisa nyebabake gangguan radio.

Miwiti

Pambuka

The Nodestream Flex can facilitate any customer’s Encode or Decode requirement with its comprehensive input, output, and mounting options. The Video Wall functionality enables output of all your Nodestream X streams on individual displays with the flexibility to direct what you want, where you wantt, with ease. Surface, VESA 100, and rack mounting options are available with up to 3 x devices mounted to a single 1.5RU shelf, saving precious rack space.

Fitur Utama

Umum

• Compact, fanless design
• Surface, VESA, or Rackmount options
• Lebokake input voltage range, low power consumption
• Bandwidth kurang, streaming HD latency kurang nganti 16 saluran video saka 8Kbps nganti 5Mbps
• Multiple input types – 4 x HDMI, US,,B and network streams

Nodestream X

• Encoder utawa decoder operasi
• 5 x HDMI outputs with Video Wall function
• Nganti 16 x stream video bebarengan
• Saluran audio Nodecom
• Nganti 11 x aliran data
• Forward decoded video streams to Nodestream Live Nodestream Live
• Nganti 16 x stream video bebarengan

Persiyapan Khas

Nodestream X

Nodestream Langsung

Sambungan

Tombol reset

• Reset – Press 2 sec & release Factory Reset – Press & hold

LED Status
RGB LED kanggo nuduhake status sistem

LED Status

• RGB LED kanggo nuduhake status sistem
• Sistem BLUE diwiwiti
• GREEN Solid (streaming), Flashing (idle)
• Masalah Jaringan RED

Ethernet
2 x Gigabit RJ45

USB
2 x Type A – Connection of peripherals

Audio Analog Kab
3.5 mm TRRS

HDMI Input x4
Connection to HDMI video sources

Video Wall HDMI Output x 4
Configurable display outputs (Decoder mode only)

Seri RS232 Kab
3.5mm TRRS – /dev/ttyTHS0

Passthrough HDMI Output
Passive display output

Ngalih daya
Ngalih on/off

Daya Input 
12-28VDC

Power Redundansi

For critical operations, an optional Y split power cable can be supplied to enable the connection of 2 independent power supplies, providing power redundancy. If 1 of the power supplies fails, the other will continue to power the device without interruption to service.

• Nodestream devices are supplied with a Quick Start Guide for installation and detailed UI functions.
• Scan the User Resources QR code on the last page for access
• The device will boot automatically when power is applied

Output Tampilan

Passthrough "OUT"
This HDMI output displays the uncut/unscaled output from the device. This output should be used for;

• Encoder modes (Video Wall outputs are disabled in Encoder modes)
• Initial device configuration
• Where a single display is connected in Decoder mode
• Kanggo view utawa ngrekam kabeh stream decoded ing mode Decoder

Tembok Video

• When in Nodestream X Decoder mode, the Video Wall function of your Flex device enables output to up to 5 displays (4 x Video Wall + 1 x Passthrough). This allows users flexibility to view sembarang utawa kabeh 4 input saka Encoder disambungake kanggo tampilan individu. Nalika Encoder sing disambungake mung streaming 1 input, input sing dipilih bakal ditampilake ing kabeh output.

• Control of the Video Wall is performed via your Harvest Control Application.
• For specifications of display outputs, refer to “Technical Specifications” on page 19

Konfigurasi

Swaraview

Ing Web Interface provides details and management of;

• Informasi versi piranti lunak
• Jaringan (s)
• Kredensial mlebu pangguna
• Dhukungan remot
• Mode sistem
• Setelan server
• Nganyari

Akses
Ing Web Interface can be accessed locally on your device or through a web browser on a PC connected to the same network.

• Web Antarmuka ora kasedhiya nganti piranti lunak Nodestream wis diwiwiti

Akses Lokal

1. Connect your device to your LAN, monitor, keyboard/mouse, and power it up.
2. Wait for the software to start, and press Alt+F11n on your keyboard or right click and select configuration.
3. Yen dijaluk, ketik rincian login sampeyan.
   • Jeneng panganggo standar = admin
   • Sandi standar = admin

Web Akses
Sambungake komputer menyang jaringan sing padha karo piranti utawa langsung liwat kabel Ethernet.

DHCP-Enabled Network

1. Sambungake piranti menyang LAN lan daya.
2. Saka ing web browser komputer sing disambungake menyang jaringan sing padha, ketik alamat IP piranti utawa http://serialnumber.loca, e.g, http://au2518nsfx1a014.local..
3. Yen dijaluk, ketik rincian login sampeyan.

The serial number can be found on the product label, affixed to the side of your device..

Jaringan Non-DHCP Enabled
If your device is connected to a non-DHCP-enabled network, and its network has not been configured, it will fall back to a default IP address of 192.168.100.101.

1. Sambungake piranti menyang LAN lan daya.
2. Konfigurasi setelan IP komputer sing disambungake menyang jaringan sing padha kanggo:
   • IP 192.168.100.102
   • Subnet 255.255.255.252
   • Lawang 192.168.100.100
3. Saka a web browser, ketik 192.168.100.101 ing baris alamat.
4. Yen dijaluk, ketik rincian login sampeyan.

When configuring multiple devices on a non-DHCP-enabled network, due to IP conflicts, only 1 device can be configured at a time. Once a device has been configured, it may be left connected to your network.  ork

Konfigurasi wiwitan

• Nodestream devices require the following to be configured before operation;
  • Jaringan (s) deleng ing ngisor iki
  • System refers to “System Mode” on page 11
  • Server(s) ref Server Configuration” on page 11

The primary network of your Nodestream device must be configured to ensure a stable connection and prevent the device from setting its IP address to its static default. Log in to the Web Antarmuka.

1. Sawise mlebu, sampeyan bakal weruh pituduh oranye kanggo ngatur antarmuka MAIN.
2. If connected to a toDHCP-enabled network, save in the “Port” window. Refer to “Port Configuration” on page 8 for configuration of static IP settings.

Jaringan

Informasi
Displays information related to the selected port (select from the drop-down in the “Port” section)

• Jeneng Jeneng port
• Status Status koneksi port
• Configured Shows if the port has been configured, whether DHCP is enabled or disabled
• alamat IP IP
• Subnet Subnet
• Lawang Lawang
• M::TU Set maximum transmission unit
• MAC Address Adapter Alamat MAC
• Nampa Live "nampa" throughput
• Ngirim Live "ngirim" throughput

Testing

Ping
For testing connection to your Nodestream X server or other devices on your network, i.e,. IP cameras.

1. Enter the  IP address to ping..
2. Click the  Ping button. The notification will display, followed by either.
   • Wektu ping ing ms sukses
   • Could not reach the addresses.l

Jaringan Nodestream X
This tool provides a means to test if all network requirements are in place to allow your device to function correctly when operating in Nodestream X modes. The following tests are performed on your Nodestream Server.

1. Tes ping menyang server
2. Tes port TCP
3. Tes TCP STUN
4. UDP port tes

• Nodestream X Server configuration required, refer to  “Server Configuration” on page 11
• Nodestream devices require Firewall rules to be in place. Refer to “Firewall Settings” on page 9

Konfigurasi Port

Ethernet
Select the port you’d like to configure from the “Port ” dropdown.

DHCP

1. Select “DHCP” from the “IPv4” drop-down if not already selected, then save.
2. When prompted, confirm the IP settings change.

Manual

1. Select “Manual” from the “IPv4” drop-down.
2. Ketik rincian jaringan kaya sing diwenehake dening Administrator Jaringan, banjur klik simpen.
3. When prompted, confirm the IP settings change.
4. Kanggo mlebu maneh menyang Web Antarmuka, ketik alamat IP anyar utawa http://serialnumber.local ing Panjenengan web browser.

WiFi
WiFi mung kasedhiya yen adaptor USB WiFi opsional wis diinstal. Adaptor WiFi sing kompatibel sing diverifikasi:

• TP-Link T2U v3
• TP-Link T3U Kab
• TP-Link T4U Kab
  1. Select “WiFi” from the “Port dropdown.
  2. Select a t network from the list of available networks from the “Visible Network ” drop-down.
  3. Select the security type and enter the password.
  4. Click save for DHCP or select “Manual”, enter port details as provided by your Network Administrator, and then click save.

Pedhot sambungan

1. Select WiFi from the “Port” drop-down.
2. Klik tombol "Putus sambungan".
   • Mung jaringan IPv4 sing didhukung
   • LAN 1 MUST be used for Nodestream traffic. LAN 2 is used for connecting to a separate network stream input. If a non-default MTU is set for a port, you MUST re-enter the value when changing port settings for the value to be retained.

Setelan Firewall

Umume firewall jaringan perusahaan / gateway / piranti lunak anti-virus duwe aturan sing ketat sing mbutuhake modifikasi supaya piranti Nodestream bisa digunakake.

Nodestream X devices communicate with the server and each other via TCP/UDP ports; therefore, the following permanent network rules for all inbound & outbound traffic must be in place:

Pelabuhan

• TCP 8180, 8230, 45000, 55443 & 55555
• UDP 13810, 40000 & 45000 – 45200
• Server access to the  IP address

Ngidini lalu lintas menyang / saka (dhaftar putih);

• myharvest.id
• *.nodestream.live
• *.nodestream.com.au
• Kabeh kisaran port kalebu
• Hubungi dhukungan Harvest kanggo informasi luwih lengkap. support@harvest-tech.com.au

Penemuan

Ngakses Piranti Nodestream
Nodestream devices connected to the same network as your device will display. Click the icon next to the Device IP to open its Web Antarmuka ing jendela anyar.

Salin Rincian Server Nodestream X
Kanggo nyalin rincian server Nodestream X saka piranti liyane;

1. Klik ing icon of the device server details you’d like to copy
2. Konfirmasi tumindak
3. Nodestream X software will restart and connect to the new server

Akses Server Nodestream X
Kanggo ngakses server Nodestream X web antarmuka, klik the icon next to the Nodestream X Server IP.

 

Sistem

Aplikasi
Nampilake informasi sing ana gandhengane karo proses piranti lunak lan panggunaan sumber daya. Iki bisa migunani kanggo diagnosa piranti lunak lan/utawa masalah kinerja.

Reset lan Dhukungan

• Reset Jaringan Ngreset kabeh setelan jaringan menyang gawan.
• Reset Piranti Ngreset kabeh setelan aplikasi lan server menyang gawan
• Factory Reset Resets ALL device settings to default (alternatively, hold “ctrl+alt” and press “r” on a connected keyboard, or use the reset button, see below, to factory reset your device

Remote support is enabled by default.t

Nganyari Sandi
Ngidini sampeyan ngganti Web Interface login password. If the password is unknown, perform a factory reset. Refer to “Reset and Support” above.

Mode Sistem
Your Nodestream device can operate as either;

• Nodestream X Encoder
• Nodestream X Decoder
• Nodestream Live Encoder
• Active mode is highlighted in RED. To change mo,  click the applicable button.

Konfigurasi Server
All Nodestream devices require configuration on a server for connection and settings management.

Ketik "kode cepet" utawa ID Server lan Kunci sing diwenehake dening Administrator Nodestream, banjur klik "Aplikasi".

Sawise piranti wis didaftar ing server, Administrator Nodestream sampeyan kudu nambahake piranti kasebut menyang grup ing server sadurunge bisa digunakake.

Nalika operasi ing mode Nodestream X Decoder, stream "decoded" bisa diterusake menyang Nodestream Live. Iki mbutuhake ndhaptar piranti menyang server Live.

To register your device in your Nodestream Live web portal and add a new device. When prompted, enter the 6-digit code shown in your device Web Kaca sistem antarmuka utawa desktop piranti (piranti kudu ana ing mode Nodestream Live Encoder utawa Nodestream X Decoder).

Nganyari

Nganyari otomatis
Automatic updates are disabled by default. Enabling this feature allows the device to download and install software when a newer version is available. During this process, the device may restart. If this is not desired, set to “No”.

Update Manual
Nalika nganyari kasedhiya kanggo piranti sampeyan, lambang bakal ditampilake ing jejere tab "Update".

Kanggo Instal nganyari sing kasedhiya:

1. Bukak bagean Update ing Web Antarmuka.
2. Pilih "Update (instal permanen)" lan nampa kondisi nalika dijaluk.
3. Pangatur sing dianyari bakal nerusake ngundhuh lan nginstal nganyari.
4. Once the update process is complete,, your device or the software may restart.

 

Nganyari dipasang kanthi bertahap. Yen nganyari manual wis rampung, terusake refresh manajer nganyari lan instal nganyari nganti piranti sampeyan dianyari.

Operasi Nodestream X

Swaraview
Nodestream X is a point-to-point video, audio, and data streaming solution with ultimate control, allowing customers to meet operational requirements. A basic system comprises;

• Encoder Ingest lan encode video / data / audio
  Decoder Tampilan / output decoded stream
• Control Application:: Manage connections and settings
• Services manage device groups, users, licensing, and communicate control messages

Numpuki
Nalika operasi ing mode Nodestream X, lan sistem ing mode siyaga (ora streaming video), overlay nampilake informasi sistem. Iki ngidini pangguna kanggo view the current system status and assists with diagnosing system issues.

1. Mode Video / Versi Piranti Lunak
   Mode video saiki - Encoder utawa Decoder lan versi piranti lunak Nodestream diinstal.
2. Serial piranti
   Nomer seri piranti.
3. IP server
   IP address of your Nodestream server.
4. Status Jaringan
   Displays the current status of network ports:
   1. IP address shown down (unplugged), not configured
5. Status Sambungan Server
   Waiting for Nodestream connection. Connecting to Nodestream serv.er Server connection error
6. Frame Rate, Resolution & Bit-rates
   Frame rate and resolution of video that will be streamed to a Decoder (Encoder mode only), and current transmit and receive bit-rates.
   • Jaringan disambungake lan diatur.
   • Network not connected to the device.
   • Network not configured – refer to “Port Configuration” on page 8
   • Connected to the server, ready to connect to another device. Connecting to the server.
   • There is a network issue preventing connection to the server. Refer to “Troubleshooting” on page 20

If the overlay is not displayed, it may be disabled. Enable it via your Harvest Control Application.

Video

Enkoding
Nalika piranti digunakake ing mode Encoder, input bisa viewed ing monitor sing disambungake. Input, kaya sing dipilih liwat aplikasi kontrol Panen, bakal ditampilake. Iki bisa migunani kanggo diagnosa masalah karo hardware lan/utawa input video stream jaringan.

Video sing ditampilake minangka refleksi langsung babagan apa sing bakal dikirim menyang Dekoder sing disambungake. Owah-owahan ing tingkat pigura lan resolusi bakal katon.

Input Hardware
Compatible sources connected to the device via HDMI or USB 3.0 can be selected as inputs within your Harvest control application. For a detailed list of supported input types, refer to “Technical Specifications” on page 19.

Due to copyright restrictions, HDCP (High-bandwidth Digital Content Protection) signals, such as those from DVD players and media streamers, cannot be captured.

Sumber Tes
Sumber video tes dibangun ing piranti sampeyan kanggo digunakake minangka input kanggo mbantu ngatasi masalah utawa persiyapan awal. Iki bisa dipilih liwat aplikasi kontrol Panen.

• Tes Sumber Tes video loop
• Test Patte:  rn Simple low bandwidth loop
• Colour Bars Colour bars with a white noise section for testing colour and high bandwidth

Mode Pro

• Enable Pro Mode via your Harvest Control Application to activate the following features:
• Video 4K60 (4 x 1080/60)
• Frame Data Sinkron
• Input data UDP ing port 40000 dialirake, pigura sinkron, karo video sing diiringi. Iki bisa dadi output nganti 4 piranti jaringan saka Dekoder Nodestream X sing disambungake.
  • Pro Mode can only be activated when hours are available on your account. To purchase hours, contact sales@harvest-tech.com.au.
  • When hours have been depleted, all Pro MMode-enabled streams will fall back to 1080/60.

Sumber Jaringan
Sumber jaringan sing kasedhiya ing jaringan sing padha karo piranti sampeyan, kayata saka kamera IP, bisa didekode lan digunakake minangka input. Input ditambahake lan dikelola liwat aplikasi kontrol Panen.

RTSP
Real-Time Streaming Protocol biasane digunakake kanggo streaming kamera IP. Padha unik kanggo manufaktur kamera lan bisa beda-beda ing antarane model. URI sumber kudu dingerteni sadurunge bisa digunakake minangka input. Yen otentikasi diaktifake ing piranti sumber, jeneng pangguna lan sandhi kudu dingerteni lan kalebu ing alamat URI.

• URI rtsp: // [pangguna]: [sandi]@[Host IP]: [RTSP Port]/stream
• Example URI rtsp://admin:admin@192.168.1.56:554/s0

RTP
Real-Time Transport Protocol (RTP) minangka protokol jaringan kanggo ngirim audio lan video liwat jaringan IP. RTP biasane mbukak liwat User DatagProtokol ram (UDP). RTP beda karo RTSP amarga sumber RTP kudu ngerti alamat IP panrima sadurunge, amarga nyurung stream video menyang IP sing ditunjuk.

• URI rtp: // [Receiver IP]: [RTP Port]
• Example URI rtp://192.168.1.56:5004

HTTP

• HTTP streaming comes in several formats: Direct HTTP, HLS, and HTTP DASH. Currently,, only Direct HTTP is supported by Nodestre, but it is not recommended.
• Example URI http://192.168.1.56:8080

Multicast

• Multicast is a one-to-one or many-to-one connection between multiple Decoders and the source. Connected routes must be multicast-enabled. The range of IP addresses reserved for multicast is 224.0.0.0 – 239.255.255.255. Multicast streaming can be delivered via RTP or UDP.
• URI udp://[Multicast IP]:[Port]
• Example URI udp://239.5.5.5:5000

UDP

Video data can also be transmitted and received over plain UDP. It acts similarly to RTP, where the video source will push data to the receiver, requiring in advance to know the destination before streaming can occur. Generally,  it’s preferable to use RTP instead of plain UDP if the user has the choice due to inbuilt mechanisms like jitter compensation in RTP.

• URI udp://[IP Penerima]:[Port UDP]
• Example URI udp://192.168.1.56:5004

Kontrol PTZ

• Your Nodestream device can control network PTZ cameras via the Windows Harvest Control Application.
• Cameras must be ONVIF-compliant, enabled, and configured with the exact security credentials of the associate.

aliran RTSP.
Your Nodestream device can control network PTZ cameras via the Windows Harvest Control Application.  Cameras must be ONVIF compliant, enabled, and configured with the exact security credentials associated with the TSPP stream.

• Setel resolusi sumber menyang 1080 lan pigura tingkat kanggo 25/30 kanggo kinerja paling apik.
• Gunakake alat ping ing Web Interface and/or software such as VLC from a PC connected to the network to est/confirm network stream IP’s and URL's.
• Direct cameras away from dynamic references where practical, i.e., water, trees. Reducing image pixel changes will decrease bandwidth requirements.

Dekoding
When your device is operating in Nodestream X Decoder mode, nd connected to an Encoder, up to 4 video streams will be displayed on connected monitor(s). Refeto r “Display Outputs” on page 3

RTP Output
Piranti sampeyan bisa diatur kanggo output stream video decoded ing format RTP kanggo viewing on another device within the connected network or integration into a 3rd party system, i.e., NVR.

1. Konfigurasi Piranti (liwat aplikasi kontrol Panen)
   • Pilih piranti lan navigasi menyang setelan video
   • Ketik IP tujuan lan wenehake port kanggo output sing pengin digunakake, nganti 4.
2. View Stream (ing ngisor iki 2 examples; other methods not listed may be suitable)
   • SDP File
   • Konfigurasi SDP file nggunakake editor teks karo ing ngisor iki.
   • c=IN IP4 127.0.0.1
   • m=video 56000 RTP/AVP 96
   • a=rtpmap:96 H264/90000
   • a=fmtp:96 media=video; clock-rate=90000; encoding-name=H264;
   • GStreamer
     Run the following command from your terminal program. The GStreamer program must be installed.
     gst-launch-1.0 udpsrc port=56000 caps=”application/x-rtp, media=video, clock-rate=90000, encoding-name=H264, payload=96″ ! rtph264depay ! decodebin! videoconvert  autovideosink
   • Nomer port, ditampilake kanthi warna abang, kudu padha karo output RTP sing dikarepake view
   • Output langsung ana hubungane karo input encoder piranti sing disambungake.
   • Port sing disaranake yaiku 56000, 56010, 56020 & 56030

Modul Langsung Nodestream
This feature allows sharing of your Nodestream X stream with external parties via Nodestream Live. Simply add your device to your Nodestream Live organisation,  nd it will be available to share via a timed link or viewed by organisation members. For information on how to add your device, refer to “Server Configuration” on page 11.

• Requires an account and subscription to Nodestream Live
• Stream settings are controlled by the Nodestream X user. The Live stream is a “slaved” view.
• When your device is not connected to an Encoder, the system idle screen will be displayed in Live..

Audio
Nodestream video devices include a single Nodecom audio channel for streaming two-way audio to other Nodestream devices in your group. The following audio devices are supported:

• USB speakerphone, headset, or capture device via the USB A accessory port
• output HDMI
• Piranti audio dipilih lan dikonfigurasi liwat aplikasi kontrol Harvest.

data
Up to 10 channels of serial, TCP, or UDP data can be simultaneously streamed between connected devices. This versatile function enables: Transmission of telemetry/sensor data to/from remote sites.

• Control of remote systems
• Kemampuan kanggo ngakses piranti remot web interfaces, e.g., IP camera, IOT device.
• Pass data saka Nodestream Decoder menyang piranti pihak katelu lan/utawa piranti jaringan lokal.

• Saluran data disambungake lan dikonfigurasi liwat aplikasi kontrol Harvest.
• Data streaming ngirim ora diandelake kanggo aplikasi kontrol kritis.
• Data can also be streamed in Pro Mode. Refer to “Pro Mode” on page 14

Aplikasi Kontrol

• Sambungan piranti lan konfigurasi input / output sing gegandhengan dikelola liwat aplikasi kontrol Harvest. Nodester
• A control-only iOS application developed for iPad. Typically used in control applications or when a customer’s Nodestream group comprises only hardware devices.
• Nodestream kanggo Windows
• Windows Nodestream Decoder, audio, lan aplikasi kontrol.
• Nodestream kanggo iOS & Android
• iOS lan Android Nodestream Decoder, Encoder, audio, lan aplikasi kontrol.
• Operasi Langsung Nodestream

Swaraview

• Nodestream Live is a point-to-cloud video and audio streaming solution that facilitates viewing nganti 16 saluran video (saben piranti) kanggo sembarang web-enabled device connected to the Internet. A basic system comprises;
  • Encoder Ingest lan Encode video / audio
  • Server managesdevicess, inputs, organisations, and users

Input Encoder

Hardware
Sumber video HDMI lan/utawa USB sing disambungake menyang piranti sampeyan bisa dipilih minangka input liwat setelan piranti ing Nodestream Live web portal. For a detailed list of tosupported types, refertoe “Technical Specifications” on page 19.

Jaringan
Network sources, such as IP cameras, available on the network(s) your device is connected to,,nareused as inputs. Network inputs are configured via the “Inputs” page within your Nodestream Live portal. A device must be in the same oorganization to be available for selection on the device settings page. For more information, refer to ” toNetwork Sources” on page 15

• The number of network streams possible, before quality is affected, depends on the source resolution and frame rate. For 16 x sources, the theggested resolution is 1080 and frame rate 25; higher resolutions will affect performance.

Audio
Where audio is enabled on a configured RTSP source, the Nodestream Live Encoder will automatically detect and stream it to your web portal. Audio streams can be muted/unmutedviviahe portal.

Lampiran

Spesifikasi Teknis

Ngatasi masalah

Sistem

Jaringan

Video

Audio

Kontak lan Dhukungan support@harvest-tech.com.au

Harvest Technology Pty Ltd

• 7 Turner Ave, Taman Teknologi
• Bentley W,  A 6102, Australia
• panen.teknologi
• All rights reserved. This document is the property of Harvest Technology Pty Ltd. No part of this publication may be reproduced, stored in a retrieval systemor   ransmitted in any form or by any means, electronic, photocopy,  recording, or otherwise, without the written consent of the CEO of Harvest Technology Pty Ltd.

Pitakonan

P: Apa aku bisa nglayani produk dhewe?

A: No, it is recommended to only have qualified service personnel service the product to avoid any potential dangers.

P: Ing endi aku bisa nemokake informasi garansi?

A: The warranty information can be found online at the following link: Warranty Information

Dokumen / Sumber Daya

NODESTREAM FLEX Remote Operations Enablement Decoder [pdf] Manual pangguna FLEX, FLEX Remote Operations Enablement Decoder, Remote Operations Enablement Decoder, Enablement Decoder

Referensi

• Manual pangguna