NODESTREAM FLEX Remote Operations Enablement Decoder User Manual

ለእርስዎ ደህንነት መረጃ
መሳሪያው አገልግሎት መስጠት እና ማቆየት ያለበት ብቃት ባላቸው የአገልግሎት ሰራተኞች ብቻ ነው። ተገቢ ያልሆነ የጥገና ሥራ አደገኛ ሊሆን ይችላል. ይህንን ምርት እራስዎ ለማቅረብ አይሞክሩ. ቲampering with this device may result in injury, fire, or electric shock, and will void your warranty. Be sure to use the specified power source for the device. Connection to an improper power source may cause fire or electric shock.

የክወና ደህንነት

ምርቱን ከመጠቀምዎ በፊት ሁሉም ገመዶች ያልተበላሹ እና በትክክል የተገናኙ መሆናቸውን ያረጋግጡ. ማንኛውንም ጉዳት ካስተዋሉ ወዲያውኑ የድጋፍ ቡድኑን ያነጋግሩ።

· To avoid short circuits, keep metal or static objects away from the device.

· አቧራ፣ እርጥበት እና የሙቀት መጠንን ያስወግዱ። ምርቱን እርጥብ ሊሆን በሚችልበት ቦታ ላይ አያስቀምጡ.

· Operating environment temperature and humidity:

የሙቀት መጠን፡

መሥራት: ከ 0 ° ሴ እስከ 35 ° ሴ

Humidity (non-condensing): Operating: 0% to 90%

Storage: 0°C to 65°C Storage: 0% to 90%

· Unplug the device from the power outlet before cleaning. Do not use liquid or aerosol cleaners.

· Contact the support team support@harvest-tech.com.au if you encounter technical problems with the product.

ምልክቶች
ጉዳት ወይም ሞት፣ ወይም በንብረት ላይ ጉዳት እንዳይደርስ ማስጠንቀቂያ ወይም ማስጠንቀቂያ።
በተገለጹት መመሪያዎች ርዕስ ወይም ደረጃዎች ላይ ተጨማሪ ማስታወሻዎች።
ከተጠቃሚው መመሪያ ወሰን ውጭ ለይዘት ተጨማሪ መረጃ።
መመሪያዎችን በማስፈጸም ላይ ተጨማሪ ጠቋሚዎች ወይም ጥቆማዎች።

ያነጋግሩ እና ድጋፍ

የተጠቃሚ መርጃዎች

support@harvest-tech.com.au

Harvest Technology Pty Ltd 7 Turner Avenue, Technology Park Bentley WA 6102, Australia harvest.technology

የክህደት ቃል እና የቅጂ መብት
የመኸር ቴክኖሎጂ በዚህ የተጠቃሚ መመሪያ ውስጥ ያለውን መረጃ ወቅታዊ ለማድረግ ቢጥርም፣ የመኸር ቴክኖሎጂ ምንም አይነት ውክልና ወይም ዋስትና አይሰጥም፣ ስለ ሙሉነት፣ ትክክለኛነት፣ አስተማማኝነት፣ ተስማሚነት ወይም ተገኝነት የተጠቃሚ መመሪያን ወይም በተጠቃሚ መመሪያ ውስጥ የተካተቱ መረጃዎች፣ ምርቶች፣ አገልግሎቶች ወይም ተዛማጅ ግራፊክስ፣ webጣቢያ ወይም ሌላ ማንኛውም ሚዲያ ለማንኛውም ዓላማ። በዚህ ሰነድ ውስጥ ያለው መረጃ በሚለቀቅበት ጊዜ ትክክለኛ ነው ተብሎ ይታመናል, ሆኖም ግን, የመኸር ቴክኖሎጂ በአጠቃቀሙ ምክንያት ለሚመጡ ማናቸውም ውጤቶች ኃላፊነቱን መውሰድ አይችልም. የመኸር ቴክኖሎጂ በማናቸውም ምርቶች እና ተያያዥ ሰነዶች ላይ ያለማሳወቂያ በማንኛውም ጊዜ ለውጦችን የማድረግ መብቱ የተጠበቀ ነው። የመኸር ቴክኖሎጂ ማናቸውንም ምርቱን ወይም ተያያዥ ሰነዶችን ከመተግበሩ ወይም ከመጠቀም የተነሳ ምንም አይነት ሃላፊነት ወይም ተጠያቂነት አይወስድም. የተጠቃሚ መመሪያውን ወይም ሌላ ጽሑፍን ካነበቡ በኋላ የሚወስዷቸው ማናቸውም ውሳኔዎች የእርስዎ ኃላፊነት ናቸው እና የመኸር ቴክኖሎጂ ለመሥራት በመረጡት ማንኛውም ነገር ተጠያቂ ሊሆን አይችልም. እንደዚህ ባሉ ነገሮች ላይ የምታደርጉት ማንኛውም አይነት መታመን በራስዎ ሃላፊነት ላይ ነው። ሁሉንም ሃርድዌር፣ ሶፍትዌሮችን እና ተያያዥ ሰነዶችን ጨምሮ የመኸር ቴክኖሎጂ ምርቶች ለአለም አቀፍ የቅጂ መብት ህጎች ተገዢ ናቸው። የዚህ ምርት ግዢ ወይም አጠቃቀም በማናቸውም የፓተንት መብቶች፣ የቅጂ መብቶች፣ የንግድ ምልክት መብቶች ወይም ሌሎች የመኸር ቴክኖሎጂ የአዕምሮአዊ ንብረት መብቶች ስር ፍቃድ ያስተላልፋል።
ዋስትና
The warranty for this product can be found online at: https://harvest.technology/terms-and-conditions/
የFCC ተገዢነት መግለጫ
ማሳሰቢያ፡- ይህ መሳሪያ በFCC ህግ ክፍል 15 መሰረት ተፈትኖ ለክፍል A ዲጂታል መሳሪያ ገደቡን የሚያከብር ሆኖ ተገኝቷል። እነዚህ ገደቦች መሳሪያው በንግድ አካባቢ ውስጥ በሚሰሩበት ጊዜ ከጎጂ ጣልቃገብነት ምክንያታዊ ጥበቃን ለመስጠት የተነደፉ ናቸው. ይህ መሳሪያ የሬድዮ ፍሪኩዌንሲ ሃይልን ያመነጫል፣ ይጠቀማል እና ሊያሰራጭ ይችላል፣ እና ካልተጫነ እና በተጠቃሚው መመሪያ መሰረት ጥቅም ላይ ካልዋለ በሬዲዮ ግንኙነቶች ላይ ጎጂ ጣልቃገብነት ሊያስከትል ይችላል። በመኖሪያ አካባቢ ውስጥ የዚህ መሳሪያ አሠራር ጎጂ ጣልቃገብነት ሊያስከትል ስለሚችል ተጠቃሚው በራሱ ወጪ ጣልቃ ገብነትን እንዲያስተካክል ይገደዳል. ለማክበር ኃላፊነት ባለው አካል በግልፅ ያልፀደቁ ለውጦች ወይም ማሻሻያዎች የተጠቃሚውን መሳሪያ የማንቀሳቀስ ስልጣን ሊያሳጡ ይችላሉ። የተገዢነት ደንቦችን ማክበርን ለመጠበቅ, የተከለለ የኤችዲኤምአይ ገመዶች ከዚህ መሳሪያ ጋር ጥቅም ላይ መዋል አለባቸው
CE/UKCA ተገዢነት መግለጫ
Marking by the (CE) and (UKCA) symbol indicates compliance of this device with the applicable directives of the European Community and meets or exceeds the following technical standards. · Directive 2014/30/EU – Electromagnetic Compatibility · Directive 2011/65/EU – RoHS, restriction of the use of certain hazardous substances in electrical and electronic
equipment Warning: Operation of this equipment is not intended for a residential environment and could cause radio interference.

ይዘቶች
Getting Started 1
Introduction 1 Key Features………………………………………………………………………………………………………………………………………………………………… 1 Typical Setup……………………………………………………………………………………………………………………………………………………………….. 1
Connections 2 Power Redundancy……………………………………………………………………………………………………………………………………………………… 2 Display Outputs …………………………………………………………………………………………………………………………………………………………… 3
ውቅረት 4
አልቋልview 4
Access 4 Local Access ……………………………………………………………………………………………………………………………………………………………….. 4 Web Access…………………………………………………………………………………………………………………………………………………………………. 5 Initial Configuration……………………………………………………………………………………………………………………………………………………… 6
Network 6 Information………………………………………………………………………………………………………………………………………………………………….. 7 Testing…………………………………………………………………………………………………………………………………………………………………………. 7 Port Configuration……………………………………………………………………………………………………………………………………………………….. 8 Firewall Settings ………………………………………………………………………………………………………………………………………………………….. 9
Discovery 9
System 10 Applications ……………………………………………………………………………………………………………………………………………………………….. 10 Reset and Support ……………………………………………………………………………………………………………………………………………………..10 Update Password……………………………………………………………………………………………………………………………………………………….10 System Mode ……………………………………………………………………………………………………………………………………………………………..11 Server Configuration…………………………………………………………………………………………………………………………………………………..11
ዝማኔዎች 12
Nodestream X Operation 13
አልቋልview 13
Overlay 13
Video 14 Encoding …………………………………………………………………………………………………………………………………………………………………….14 Decoding …………………………………………………………………………………………………………………………………………………………………….16
ኦዲዮ 17
የውሂብ 17
Control Applications 18
Nodestream Live Operation 18
አልቋልview 18
Encoder Inputs 18 Hardware ……………………………………………………………………………………………………………………………………………………………………18 Network ……………………………………………………………………………………………………………………………………………………………………… 18
ኦዲዮ 18
Appendix 19
ቴክኒካዊ ዝርዝሮች 19
Troubleshooting 20 System……………………………………………………………………………………………………………………………………………………………………….. 20 Network ……………………………………………………………………………………………………………………………………………………………………… 20 Video …………………………………………………………………………………………………………………………………………………………………………..21 Audio ………………………………………………………………………………………………………………………………………………………………………….. 21

Flex የተጠቃሚ መመሪያ

እንደ መጀመር

መግቢያ
With its comprehensive input, output and mounting options, the Nodestream Flex can facilitate any customer Encode or Decode requirements. The Video Wall functionality enables output of all your Nodestream X streams on individual displays with the flexibility to direct what you want, where you want with ease. Surface, VESA 100 and rack mounting options are available with up to 3 x devices mounted to a single 1.5RU shelf, saving precious rack space.

ቁልፍ ባህሪያት
General · Compact, fanless design · Surface, VESA or Rackmount options · Wide input voltage range, low power consumption · Low bandwidth, low latency HD streaming of up to 16
video channels from 8Kbps to 5Mbps · Multiple input types – 4 x HDMI, USB and network
ጅረቶች
የተለመደ ማዋቀር

Nodestream X · Encoder or Decoder operation · 5 x HDMI outputs with Video Wall function · Up to 16 x simultaneous video streams · Nodecom audio channel · Up to 11 x data streams · Forward decoded video streams to Nodestream Live
Nodestream Live · Up to 16 x simultaneous video streams

Nodestream X

Nodestream Live
HTG-TEC-GUI-020_0 Jun 2025

ገጽ 1 ከ 22

Flex የተጠቃሚ መመሪያ
ግንኙነቶች

8 10 እ.ኤ.አ

1 Reset button Reset – Press 2 sec & release Factory Reset – Press & hold

የስርዓት ሁኔታን ለማመልከት 2 ሁኔታ LED RGB LED

BLUE GREEN RED

System starting Solid (streaming), Flashing (idle) Network issue

3 Ethernet 2 x Gigabit RJ45

4 USB 2 x Type A – Connection of peripherals

5 Analog Audio 3.5mm TRRS

6 HDMI Input x4 Connection to HDMI video sources

7 Video Wall HDMI Output x 4 Configurable display outputs (Decoder mode only)
RX

8 RS232 Serial 3.5mm TRRS – /dev/ttyTHS0

9 Passthrough HDMI Output Passive display output

GND TX

10 Power Switch On/off switch

11 የኃይል ግቤት 12-28VDC

የኃይል ድግግሞሽ
For critical operations, an optional Y split power cable can be supplied to enable connection of 2 independent power supplies providing power redundancy. In the event that 1 of the power supplies fails, the other will continue to power the device without interruption to service.

· Nodestream devices are supplied with a Quick Start Guide for installation and detailed UI function. Scan the User Resources QR code on the last page for access
· Device will boot automatically when power is applied

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 2 ከ 22

Flex የተጠቃሚ መመሪያ
የማሳያ ውጤቶች
Passthrough “OUT”
This HDMI output displays the uncut/unscaled output from the device. This output should be used for; · Encoder modes (Video Wall outputs are disabled in Encoder modes) · Initial device configuration · Where a single display is connected in Decoder mode · To view or record the entire decoded stream in Decoder mode
የቪዲዮ ግድግዳ
When in Nodestream X Decoder mode, the Video Wall function of your Flex device enables output to up to 5 displays (4 x Video Wall + 1 x Passthrough). This allow users flexibility to view any or all of the 4 inputs from a connected Encoder to individual displays. When the connected Encoder is only streaming 1 input, the selected input will be displayed on all outputs.

4 x inputs from a connected Encoder

1 x input from a connected Encoder
· Control of the Video Wall is performed via your Harvest Control Application. · For specifications of display outputs, refer “Technical Specifications” on page 19
HTG-TEC-GUI-020_0 Jun 2025

ገጽ 3 ከ 22

Flex የተጠቃሚ መመሪያ
ማዋቀር
አልቋልview
የ Web Interface provides details and management of; · Software version information · Network(s) · User login credentials · Remote support · System mode · Server settings · Updates
መዳረሻ
የ Web Interface can be accessed locally on your device, or a web browser of a PC connected to the same network.
Web የ Nodestream ሶፍትዌር እስኪጀምር ድረስ በይነገጽ አይገኝም
አካባቢያዊ መዳረሻ
1. Connect your device to your LAN, monitor, keyboard/mouse and power it up.
ኤተርኔት
2. Wait for the software to start and press alt+F1 on your keyboard or right click and select configuration.
3. When prompted, enter your login details. Default username = admin Default password = admin

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 4 ከ 22

Flex የተጠቃሚ መመሪያ Web መዳረሻ
Connect a computer to the same network as your device or directly via an Ethernet cable.
ኤተርኔት

ኤተርኔት

DHCP Enabled Network 1. Connect your device to your LAN and power it up.
2. ከ web browser of a computer connected to the same network, enter the device IP address or http://serialnumber.local , e.g http://au2518nsfx1a014.local
3. When prompted, enter your login details.

Serial number can be found on the product label, affixed to the side of your device

የDHCP ያልሆነ የነቃ አውታረ መረብ

If your device is connected to a non-DHCP enabled network, and its network has not been configured, it will fall-back to a default IP address of 192.168.100.101.

1. Connect your device to your LAN and power it up.

2. Configure the IP settings of a computer connected to the same network to:

192.168.100.102

ንዑስ መረብ 255.255.255.252

ጌትዌይ 192.168.100.100

3. From a web አሳሽ ፣ በአድራሻ አሞሌው ውስጥ 192.168.100.101 ያስገቡ።

4. When prompted, enter your login details.

When configuring multiple devices on a non-DHCP enabled network, due to IP conflicts, only 1 device can be configured at a time. Once a device has been configured, it may be left connected to your network

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 5 ከ 22

Flex የተጠቃሚ መመሪያ

የመጀመሪያ ውቅር

Nodestream devices require the following to be configured prior to operation;

Network(s) System Mode Server(s)

refer below refer “System Mode” on page 11 refer “Server Configuration” on page 11

The primary network of your Nodestream device must be configured to ensure a stable connection and prevent the device from setting its IP address to its static default.

1. ወደ ግባ Web Interface. 2. Once logged in, you will notice an orange prompt to configure the MAIN interface.

3. If connected to a DHCP enabled network click save in the “Port” window. Refer to “Port Configuration” on page 8 for configuration of static IP settings.
አውታረ መረብ

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 6 ከ 22

Flex የተጠቃሚ መመሪያ

መረጃ
Displays information related to the selected port (select from the drop down in the “Port” section)

Name Status Configured DHCP IP Subnet Gateway MTU MAC Address Receiving Sending

Name of the port Connection status of the port Shows if the port been configured DHCP is enabled or disabled IP address Subnet Gateway Set maximum transmission unit Adapter MAC address Live “receiving” throughput Live “sending” throughput

መሞከር

ፒንግ

For testing connection to your Nodestream X server or other devices on your network, i.e. IP cameras.

1. Enter IP address to ping

2. Click Ping button

3. Notification will display followed by either

· Ping time in ms · Could not reach the IP address

successful unsuccessful

Nodestream X Network
This tool provides a means to test if all network requirements are in place to allow your device to function correctly when operating in Nodestream X modes. The following tests are performed to your Nodestream Server;
1. Ping test to the server 2. TCP port test 3. TCP STUN test 4. UDP port test

· Nodestream X Server configuration required, refer “Server Configuration” on page 11 · Nodestream devices require Firewall rules to be in place, refer “Firewall Settings” on page 9

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 7 ከ 22

Flex የተጠቃሚ መመሪያ
ወደብ ውቅረት
ኤተርኔት
ከ"ወደብ" ተቆልቋይ ውስጥ ማዋቀር የሚፈልጉትን ወደብ ይምረጡ።
DHCP 1. Select “DHCP” from the “IPv4” drop down if not already
selected, then save. 2. When prompted, confirm IP settings change.
Manual 1. Select “Manual” from the “IPv4” drop down. 2. Enter network details as provided by your Network
Administrator, then click save. 3. When prompted, confirm IP settings change. 4. To log back into the Web Interface, enter the new
IP address or http://serialnumber.local in your web አሳሽ.
ዋይፋይ
WiFi is only available if an optional USB WiFi adapter is installed. Verified compatible WiFi adapters: · TP-Link T2U v3 · TP-Link T3U · TP-Link T4U
1. Select “WiFi” from the “Port” drop down. 2. Select network from list of available networks from
the “Visible Networks” drop down. 3. Select security type and enter password. 4. Click save for DHCP or select “Manual”, enter port
details as provided by your Network Administrator then click save.
Disconnect 1. Select WiFi from the “Port” drop down. 2. Click the “Disconnect” button.
· Only IPv4 networks are supported · LAN 1 MUST be used for Nodestream traffic. LAN 2 is used for connecting to separate network
stream inputs
Were a non-default MTU is set for a port, you MUST re-enter the value when changing port settings for the value to be retained.

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 8 ከ 22

Flex የተጠቃሚ መመሪያ
የፋየርዎል ቅንብሮች
የኮርፖሬት ኔትወርክ ፋየርዎል/ጌትዌይስ/የጸረ-ቫይረስ ሶፍትዌር የኖድዥም መጠቀሚያ መሳሪያዎች እንዲሰሩ ማሻሻያ የሚጠይቁ ጥብቅ ህጎች መኖራቸው የተለመደ ነው።
Nodestream X devices communicate with the server and each other via TCP/UDP ports, therefore the following permanent network rules for all inbound & outbound traffic must be in place: Ports TCP 8180, 8230, 45000, 55443 & 55555 UDP 13810, 40000 & 45000 – 45200 Server access to IP address
Allow traffic to/from (whitelist); · myharvest.id · *.nodestream.live · *.nodestream.com.au
· All port ranges are inclusive · Contact Harvest support for further information. support@harvest-tech.com.au
ግኝት

Access Nodestream Devices Nodestream devices connected to the same network as your device will display. Click the IP to open its Web Interface in a new window.
Copy Nodestream X Server Details To copy the Nodestream X server details from another device; 1. Click the icon of the device server details you’d like to copy 2. Confirm the action 3. Nodestream X software will restart and connect to the new server

icon next to the Device

Access Nodestream X Server To access the Nodestream X server web በይነገጽ ፣ ጠቅ ያድርጉ

icon next to the Nodestream X Server IP.

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 9 ከ 22

Flex የተጠቃሚ መመሪያ
ስርዓት

መተግበሪያዎች
ከሶፍትዌር ሂደቶች እና ከንብረት አጠቃቀማቸው ጋር የተያያዙ መረጃዎችን ያሳያል። ይህ ሶፍትዌር እና/ወይም የአፈጻጸም ጉዳዮችን በመመርመር ጠቃሚ ሊሆን ይችላል።

Reset and Support

Network Reset Device Reset Factory Reset

Resets all network settings to default.
Resets all application and server settings to default
Resets ALL device settings to default (alternatively, hold “ctrl+alt” and press “r” on a connected keyboard, or use the reset button, see below, to factory reset your device)

በግምት 10 ሰከንድ

ዳግም አስጀምር ቁልፍን ተጭነው ይያዙ

የ LED ሁኔታ

(ብልጭ ድርግም)

Status LED (off)

የልቀት ዳግም ማስጀመር አዝራር

የርቀት ድጋፍ

Remote support enables Harvest support technicians to access your device if advanced troubleshooting is required. To enable/disable, click the “remote support” button.

የርቀት ድጋፍ በነባሪነት ነቅቷል።
የይለፍ ቃል አዘምን
ን እንዲቀይሩ ያስችልዎታል Web Interface login password. If the password is unknown, perform a factory reset. Refer “Reset and Support” above.

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 10 ከ 22

Flex የተጠቃሚ መመሪያ
የስርዓት ሁነታ
Your Nodestream device can operate as either; Nodestream X Encoder Nodestream X Decoder Nodestream Live Encoder Active mode is highlighted in RED. To change mode click the applicable button.
የአገልጋይ ውቅር
All Nodestream devices require configuration to a server for connection and settings management.
Enter the “quick code” or Server ID and Key provided by your Nodestream Administrator, then click “Apply”. Once a device has been registered to a server, your Nodestream Administrator will need to add the device to a group within the server before it can be used.
When operating in Nodestream X Decoder mode, the “decoded” stream can be forwarded on to Nodestream Live. This requires registration of your device to your Live server.
To register your device, login to your Nodestream Live web portal and add a new device. When prompted enter the 6 digit code shown in your device Web Interface system page or device desktop (device must be in Nodestream Live Encoder or Nodestream X Decoder mode).

HTG-TEC-GUI-020_0 Jun 2025

Device registered not streaming

Device registered streaming
ገጽ 11 ከ 22

Flex የተጠቃሚ መመሪያ
ዝማኔዎች
Automatic Updates Automatic updates are disabled by default. Enabling this feature allows the device to download and install software when a newer version is available. During this process the device may restart. If this is not desired, set to “No”.
Manual Updates When an update is available for your device, an icon will be displayed next to the “Updates” tab. To Install the available update(s): 1. Open the Updates section of the Web Interface. 2. Select “Update (permanent install)” and accept the conditions when prompted. 3. The updated manager will proceed to download and install the update. 4. Once the update process is complete your device or the software may restart.

ዝማኔዎች በእድገት ተጭነዋል። በእጅ የሚደረግ ዝማኔ ሲጠናቀቅ የዝማኔ አቀናባሪውን ማደስ እና መሳሪያዎ እስካልተዘመነ ድረስ ዝማኔዎችን መጫንዎን ይቀጥሉ።

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 12 ከ 22

Flex የተጠቃሚ መመሪያ

Nodestream X Operation

አልቋልview
Nodestream X is a point to point video, audio and data streaming solution with ultimate control allowing customers to meet operational requirements. A basic system comprises of;

Encoder Decoder Control Application Server

Ingest and encode video/data/audio Display/output decoded streams Manage connections and settings Manage device groups, users, licensing and communicate control messages

ተደራቢ
When operating in Nodestream X mode, and the system is in standby mode (not streaming video), an overlay displays system information. This allows the user to view current system status and assists with diagnosing system issues.

1 Video Mode / Software Version Current video mode – Encoder or Decoder and Nodestream software version installed.

2 Device Serial Serial number of device.

3 Server IP IP address of your Nodestream server.

4 Network Status Displays current status of network ports:
IP address shown down (unplugged) not configured

Network connected and configured. Network not connected to device. Network not configured – refer “Port Configuration” on page 8

5 Server Connection Status
Waiting for Nodestream connections Connecting to Nodestream server Server connection error

Connected to server, ready to connect to another device. Connecting to server. There is a network issue preventing connection to the server. Refer “Troubleshooting” on page 20

6 Frame Rate, Resolution & Bit-rates Frame rate and resolution of video that will be streamed to a Decoder (Encoder mode only), and current transmit and receive bit-rates.

If overlay is not displayed, it may be disabled. Enable it via your Harvest Control Application.

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 13 ከ 22

Flex የተጠቃሚ መመሪያ
ቪዲዮ
ኢንኮዲንግ
When your device is operating in Encoder mode, inputs can be viewed on a connected monitor. Inputs, as selected via your Harvest control application, will be displayed. This can be useful to diagnose issues with hardware and/or network stream video inputs.
Displayed video is a direct reflection of what will be sent to a connected Decoder. Changes to frame rate and resolution will be visible.
Hardware Inputs
Compatible sources connected to the device via HDMI or USB 3.0 can be selected as inputs within your Harvest control application. For a detailed list supported input types refer “Technical Specifications” on page 19.

Typical Encoder display, 4 x video sources selected and waiting for Nodestream connections

No video source connected to selected input Refer “Troubleshooting” on page 20

Video source not supported Refer “Troubleshooting” on page 20

Due to copyright restrictions, HDCP (High-bandwidth Digital Content Protection) signals such as DVD players and media streamers cannot be captured.

የሙከራ ምንጮች

Test video sources are built into your device for use as an input to assist with troubleshooting or initial setup. These can be selected via your Harvest control application.

Test Source Test Pattern Colour Bars

Test video loop Simple low bandwidth loop Colour bars with white noise section for testing colour and high bandwidth

ፕሮ ሁነታ
Enable Pro Mode, via your Harvest Control Application, to activate the following features:

4K60 Video (4 x 1080/60)
Frame Synchronous Data UDP data input on port 40000 is streamed, frame synchronous, with the accompanying video. This can be output to up to 4 network devices from your connected Nodestream X Decoder.

· Pro Mode can only be activated when hours are available on your account. To purchase hours, contact sales@harvest-tech.com.au.
· When hours have been depleted, all Pro Mode enabled streams will fall back to 1080/60.

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 14 ከ 22

Flex የተጠቃሚ መመሪያ

Network Sources
Network sources available on the same network as your device, such as those from IP cameras, can be decoded and used as inputs. Inputs are added and managed via the Harvest control application.

RTSP

Real-Time Streaming Protocol is typically used for streaming IP cameras. They are unique to camera manufacturers and can differ between models. The URI of the source must be known before it can be used as an input. If authentication is enabled on the source device, the user name and password must be known and included in the URI address.

ዩአርአይ

rtsp://[user]:[password]@[Host IP]:[RTSP Port]/stream

Example URI rtsp://admin:admin@192.168.1.56:554/s0

አርቲፒ

Real-Time Transport Protocol (RTP) is a network protocol for delivering audio and video over IP networks. RTP typically runs over User Datagram Protocol (UDP). RTP differs from RTSP in that the RTP source needs to know the IP address of the receiver beforehand, as it pushes the video stream to that designated IP.

ዩአርአይ

rtp://[Receiver IP]:[RTP Port]

Example URI rtp://192.168.1.56:5004

ዩዲፒ

Video data can also be transmitted and received over plain UDP. It acts similarly to RTP where the video source will push data to the receiver, requiring in advance to know the destination before streaming can occur. Generally,
it’s preferable to use RTP instead of plain UDP if the user has the choice due to inbuilt mechanisms like jitter compensation in RTP.

ዩአርአይ

udp://[Receiver IP]:[UDP Port]

Example URI udp://192.168.1.56:5004

HTTP

HTTP streaming comes in several formats; Direct HTTP, HLS, and HTTP DASH. Currently only Direct HTTP is supported by Nodestream but it is not recommended.

ዩአርአይ

http://[Host IP]:[Host Port]

Example URI http://192.168.1.56:8080

መልቲካስት

Multicast is a one-to-one or more connection between multiple Decoders and the source. Connected routers must be multicast enabled. The range of IP addresses reserved for multicast is 224.0.0.0 – 239.255.255.255. Multicast streaming can be delivered via RTP or UDP.

ዩአርአይ

udp://[Multicast IP]:[Port]

Example URI udp://239.5.5.5:5000

የ PTZ ቁጥጥር
Your Nodestream device is able to control network PTZ cameras via the Windows Harvest Control Application. Cameras must be ONVIF compliant, enabled, and configured with the exact security credentials as the associated RTSP stream.

· Set source resolution to 1080 and frame rate to 25/30 for best performance.
· Use the ping tool in the Web Interface and/or software such as VLC from a PC connected to the network test/confirm network stream IP’s and URLኤስ.
· Direct cameras away from dynamic references where practical, i.e. water, trees. Reducing image pixel changes will decrease bandwidth requirements.

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 15 ከ 22

Flex የተጠቃሚ መመሪያ
መፍታት
When your device is operating in Nodestream X Decoder mode, and connected to an Encoder, up to 4 video streams will be displayed on connected monitor(s). Refer “Display Outputs” on page 3

Active stream

System idle

RTP Outputs
Your device can be configured to output its decoded video streams in RTP format for viewing on another device within the connected network or integration into a 3rd party system, i.e. NVR.
1 Device Configuration (via your Harvest control application) · Select your device and navigate to its video settings · Enter the destination IP and assign a port for the outputs you wish to use, up to 4.
2 View the Stream (below are 2 examples, other methods not listed may be suitable)
ደኢህዴን File Configure an SDP file using a text editor with the following. c=IN IP4 127.0.0.1 m=video 56000 RTP/AVP 96 a=rtpmap:96 H264/90000 a=fmtp:96 media=video; clock-rate=90000; encoding-name=H264;
GStreamer Run the following command from your terminal program, Gstreamer program must be installed. gst-launch-1.0 udpsrc port=56000 caps=”application/x-rtp, media=video, clock-rate=90000, encoding-name=H264, payload=96″ ! rtph264depay ! decodebin ! videoconvert ! autovideosink

· Port number, shown in red, must be the same as the RTP output you’d like to view · Outputs are directly related to the inputs of the encoder your device is connected to. · Suggested ports to use are 56000, 56010, 56020 & 56030

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 16 ከ 22

Flex የተጠቃሚ መመሪያ
Nodestream Live Module
This feature allows sharing of your Nodestream X stream with external parties via Nodestream Live. Simply add your device to your Nodestream Live organisation and it will be available to share via a timed link or viewed by organisation members. For information on how to add your device, refer “Server Configuration” on page 11.
· Requires account and subscription to Nodestream Live · Stream settings are controlled by the Nodestream X user, Live stream is a “slaved” view. · When your device is not connected to an Encoder, the system idle screen will be displayed in Live
ኦዲዮ
Nodestream video devices include a single Nodecom audio channel for streaming two-way audio to other Nodestream devices in the your group. The following audio devices are supported: · USB speakerphone, headset or capture device via the USB A accessory port · HDMI output
Audio devices are selected and configured via your Harvest control application.

ውሂብ
Up to 10 channels of serial, TCP or UDP data can be simultaneously streamed between connected devices.
ይህ ሁለገብ ተግባር የሚከተሉትን ያስችላል።
· Transaction of telemetry/sensor data to/from remote sites. · Control of remote systems . · Ability to access remote device web interfaces, e.g. IP camera, IOT device. · Pass data from your Nodestream Decoder to a 3rd party device and/or local network device.

ዳሳሽ
Positional Data

RS232 (/dev/ttyTHS1)
TCP (192.168.1.100:80)
RS232 (/dev/ttyUSB0)

UDP (192.168.1.200:5004)

ኢንኮደር

ቻናል 0 ቻናል 1 ቻናል 2 ቻናል 3
መተግበሪያ ዘፀample

ዲኮደር

RS232 (/dev/ttyUSB0)
TCP (127.0.0.1:4500)
UDP (/dev/ttyTHS1)
UDP (DecoderIP:4501)

Web በይነገጽ
ቁጥጥር

· Data channels are connected and configured via your Harvest control application. · Streamed data should not be relied upon for critical control applications. · Data can also be streamed in Pro Mode, refer “Pro Mode” on page 14

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 17 ከ 22

Flex የተጠቃሚ መመሪያ
የቁጥጥር መተግበሪያዎች
Device connections and associated input/output configurations are managed via Harvest control applications. Nodester A control only iOS application developed for iPad. Typically used in control applications or when a customers Nodestream group comprises only of hardware devices. Nodestream for Windows Windows Nodestream Decoder, audio, and control application. Nodestream for iOS & Android iOS and Android Nodestream Decoder, Encoder, audio, and control application.

Nodestream Live Operation

አልቋልview

Nodestream Live is a point to cloud video and audio streaming solution that facilitates viewing of up to 16 video channels (per device) to any web enabled device connected to the Internet. A basic system comprises of;

ኢንኮደር አገልጋይ

Ingest and Encode video/audio Manage devices, inputs, organisations, and users

ኢንኮደር ግብዓቶች

ሃርድዌር

HDMI and/or USB video sources connected to your device can be selected as inputs via device settings in your Nodestream Live web portal. For a detailed list supported input types refer “Technical Specifications” on page 19.
አውታረ መረብ

Network sources, such as IP cameras, available on the network(s) your device is connected to can be used as inputs.
Network inputs are configured via the “Inputs” page within your Nodestream Live portal. A device must be in the same organisations “location” to be available for selection on the device settings page. For more information, refer “Network Sources” on page 15

· The number of network streams possible, before quality is affected depends on the source resolution and frame rate. For 16 x sources, suggested resolution is 1080 and frame rate 25, higher resolutions will effect performance.

ኦዲዮ
Where audio is enabled on an configured RTSP source, the Nodestream Live Encoder will automatically detect and stream it to you Nodestream Live web portal. Audio streams can be muted/un-muted via the device settings in the portal.

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 18 ከ 22

Flex የተጠቃሚ መመሪያ

አባሪ

ቴክኒካዊ ዝርዝሮች

አካላዊ
Physical dimensions (HxWxD) Weight
ኃይል
Input Consumption (operating)
አካባቢ
የሙቀት እርጥበት

51.5 x 140 x 254 mm (2.03″ x 5.5″ x 10″) 2.2kg (4.85lbs)
12 to 28VDC – 4 pin DIN 9w (typical Encoder) 17w (typical Decoder)
Operating: 0°C to 35°C Operating: 0% to 90% (non-condensing)

Storage: -20°C to 65°C Storage: 0% to 90% (non-condensing)

ቪዲዮ
ግቤት
ውፅዓት

4 x HDMI
2 x USB Type A 3.0 HDMI Passthrough 4 x HDMI Video Wall

Resolutions up to 1920×1080 pixels Frame rates up to 60fps 4:2:0 8-bit, 4:2:2 8-bit, 4:4:4 8-bit, 4:4:4 10-bit
Uncompressed YUV 4:2:0 MJPEG
ከፍተኛ ጥራት 3840×2160 @ 60Hz
Fixed resolution 1920×1080 @ 60Hz

Network Streams
የሚደገፉ ፕሮቶኮሎች
ሌሎች በይነገጽ
Ethernet WiFi Serial Audio USB UI
የተካተቱ መለዋወጫዎች
ሃርድዌር
ሰነድ

RTSP/RTP/HTTP/UDP (MPEG, H.264, H.265)

2 x 10/100/1000 – RJ45 802.11ac 2.4GHz/5GHz (optional adapter) RS232 – 3.5mm TRRS Analog – 3.5mm TRRS USB 3.0 type-A port Status LED Reset button

PSU Serial cable Mounts
ፈጣን ጅምር መመሪያ

AC/DC 12V 36w with multi country adapters 3.5mm to DB9 Surface

ማረጋገጫ

RCM, CE, UKCA, FCC

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 19 ከ 22

Flex የተጠቃሚ መመሪያ

መላ መፈለግ
ስርዓት

ጉዳይ
መሣሪያው ኃይል አይሰጥም

ምክንያት

ጥራት

Supply not connected or powered Supply outside of specified voltage

Confirm supply is connected and powered
Confirm supply meets specifications, refer “Technical Specifications” on page 19

Unable to remotely access Web በይነገጽ

LAN port not configured
Network issue Device not powered

Connect to device locally and confirm network configuration correct
Refer “network” troubleshooting below
መሣሪያው መብራቱን ያረጋግጡ

Device operating in incorrect mode

Device “system mode” not set

Set desired system mode in Web Interface Refer “System Mode” on page 11

የመሳሪያው ሙቀት መጨመር

Inadequate space around heat-sink Environmental conditions

Ensure adequate ventilation (refer quick start guide)
Ensure specified operating conditions are met Refer “Technical Specifications” on page 19

Keyboard and/or mouse not responding Faulty keyboard and mouse Not plugged in

ሌላ የቁልፍ ሰሌዳ እና መዳፊት ይሞክሩ መሳሪያ(ዎች) ወይም ዶንግሌ በትክክል መገናኘቱን ያረጋግጡ

የመግባት እና/ወይም የአውታረ መረብ ዝርዝሮችን ረስተዋል።

ኤን/ኤ

Factory reset device, refer “Reset and Support” on page 10 or Device Quick Start Guide

አውታረ መረብ
ጉዳይ
LAN (unplugged) message displayed
“Server connection error” message displayed (No connection to server) Status LED Red
Unable to open video stream input

ምክንያት

ጥራት

Network not connected to LAN port
Incorrect/inactive port on network switch

የኤተርኔት ገመድ መገናኘቱን ያረጋግጡ የተገናኘው ወደብ ገባሪ እና መዋቀሩን ያረጋግጡ

የአውታረ መረብ ችግር
Port not configured Firewall settings

Check an Ethernet cable is plugged into LAN 1
የ WiFi አስማሚ መሰካቱን እና ከትክክለኛው የWiFi አውታረ መረብ ጋር መገናኘቱን ያረጋግጡ
Confirm port configuration is correct Refer “Port Configuration” on page 8
Ensure firewall settings are implemented and correct. Refer “Firewall Settings” on page 9

Associated network not connected and/or configured Stream source not connected and/ or powered Stream URI incorrect
Stream not enabled and/or configured on source device

Confirm network connected and configured Refer “Port Configuration” on page 8 Confirm stream source connected and powered
Confirm URI is correct Refer “Network Sources” on page 15 Login to source interface and confirm stream is enabled and correctly configured

HTG-TEC-GUI-020_0 Jun 2025

ገጽ 20 ከ 22

Flex የተጠቃሚ መመሪያ

ቪዲዮ
ጉዳይ
ለመከታተል ምንም ውጤት የለም።
HDMI input not displaying video Black screen displayed when USB source selected Incorrect video source displayed Poor video quality
ኦዲዮ
ጉዳይ
No audio input and/or output Output volume too low Input volume too low Poor audio quality
HTG-TEC-GUI-020_0 Jun 2025

ምክንያት

ጥራት

መቆጣጠሪያ አልተገናኘም ወይም አልተጎለበተም።
Connected to incorrect port Incompatible cable or too long
Device in Encoder mode

Ensure monitor(s) connected and powered Test monitor with an alternative input
Connect display to “OUT” port
Ensure HDMI cable meets or exceeds resolution and frame rate specifications, test with a shorter cable
Videowall outputs are disabled in encoder mode, connect display to “OUT” port

Input source not powered Incompatible cable or too long

Ensure source is connected and powered
Ensure HDMI cable meets or exceeds resolution and frame rate specifications, test with a shorter cable

የዩኤስቢ መሣሪያ አይደገፍም።

Confirm USB source meets specifications refer “Technical Specifications” on page 19
Test USB source with another device

Input not selected in Harvest control application

Select the correct input source via your Harvest control application

ደካማ የግቤት ምንጭ ጥራት
Insufficient network bandwidth
Input settings set low in Harvest control application
Network stream source settings low
Lower quality stream sub profile selected not main
USB source incompatibility or USB 2.0

Test video source with another input device (monitor) Increase network bandwidth or only stream 1 input Check input configuration settings in your Harvest control application Login to network stream source device and adjust output settings Ensure main profile stream is selected in stream URI
Confirm USB source meets specifications refer “Technical Specifications” on page 19 Use USB 3.0 or greater device Contact support@harvest-tech.com.au with source details

ምክንያት
መሳሪያ አልተገናኘም መሳሪያ አልተመረጠም።
Device muted Level set too low

ጥራት
Ensure device is connected and powered on Select correct input and/or output device in your Harvest control application Confirm device is not muted
በተገናኘው መሳሪያ ወይም በመኸር መቆጣጠሪያ መተግበሪያዎ የውጤት መጠን ይጨምሩ

ደረጃው በጣም ዝቅተኛ ነው።
ማይክሮፎን ተዘግቷል ወይም በጣም ሩቅ
ደካማ የኬብል ግንኙነት የተበላሸ መሳሪያ ወይም ገመድ የተወሰነ የመተላለፊያ ይዘት

Increase mic level at the connected device or via your Harvest control application
ማይክሮፎን አለመዘጋቱን ያረጋግጡ ወደ ማይክሮፎን ያለውን ርቀት ቀንስ
ገመድ እና ግንኙነቶችን ይፈትሹ
Replace device and/or cable
Increase available bandwidth and/or reduce bandwidth of video streams

ገጽ 21 ከ 22

የተጠቃሚ መርጃዎች
ያነጋግሩ እና ድጋፍ support@harvest-tech.com.au

የመኸር ቴክኖሎጂ Pty Ltd 7 Turner Ave፣ Technology Park Bentley WA 6102፣ Australia harvest.technology

ሁሉም መብቶች የተጠበቁ ናቸው። ይህ ሰነድ የመኸር ቴክኖሎጂ Pty Ltd ንብረት ነው። የዚህ ክፍል የለም።

ህትመቱ እንደገና ሊባዛ፣ በዳግም ማግኛ ስርዓት ውስጥ ሊከማች ወይም በማንኛውም መልኩ ወይም በማንኛውም ሊተላለፍ ይችላል።

ማለት፣ ኤሌክትሮኒክስ፣ ፎቶ ኮፒ፣ ቀረጻ ወይም በሌላ መልኩ ያለ ዋና ሥራ አስፈፃሚው የጽሁፍ ፈቃድ

የመኸር ቴክኖሎጂ Pty Ltd.

ሰነዶች / መርጃዎች

NODESTREAM FLEX Remote Operations Enablement Decoder [pdf] የተጠቃሚ መመሪያ
FLEX, FLEX Remote Operations Enablement Decoder, Remote Operations Enablement Decoder, Enablement Decoder

ዋቢዎች

የተጠቃሚ መመሪያ

NODESTREAM FLEX Remote Operations Enablement Decoder User Manual

FLEX Remote Operations Enablement Decoder

ዝርዝሮች

የምርት መረጃ

እንደ መጀመር

ግንኙነቶች

ማዋቀር

የክወና ደህንነት

የምርት አጠቃቀም መመሪያዎች

እንደ መጀመር

ግንኙነቶች

ማዋቀር

የሚጠየቁ ጥያቄዎች

ጥ: ምርቱን ራሴ ማገልገል እችላለሁ?

ጥ፡ የዋስትና መረጃውን የት ማግኘት እችላለሁ?

ሰነዶች / መርጃዎች

ዋቢዎች

አስተያየት ይስጡ

ምላሽ ሰርዝ