Igwe mmemme KB360 SmartSet

Ntuziaka onye ọrụ

Ji nganga hazie na aka gbakọta na USA kemgbe 1992

Kinesis® AdvantagAhụigodo e360™ nwere ụdị ahụigodo SmartSet™ Programming Engine nke akwụkwọ ntuziaka a kpuchiri gụnyere ahụigodo usoro KB360 niile (KB360-xxx). Ụfọdụ atụmatụ nwere ike ịchọ nkwalite firmware. Ọ bụghị atụmatụ niile akwadoro na ụdị niile. Akwụkwọ ntuziaka a anaghị ekpuchi nhazi na atụmatụ maka Advantage360 ọkachamara ahụigodo nke na-egosipụta injin mmemme ZMK.

Mbipụta nke Febụwarị 11, 2021

Akwụkwọ ntuziaka a na-ekpuchi atụmatụ agbakwunyere site na ụdị firmware 1.0.0.
Ọ bụrụ na ị nwere ụdị firmware mbụ, ọ bụghị atụmatụ niile akọwara n'akwụkwọ ntuziaka a nwere ike ịkwado. Ka ibudata firmware ọhụrụ ebe a:
kinesis.com/support/adv360/#firmware-updates

© 2022 nke Kinesis Corporation, echekwara ikike niile. KINESIS bụ ụghalaahia edenyere nke ụlọ ọrụ Kinesis. ADVANTAGE360, KEYBOARD CONTOURED, SMARTSET, na v-DRIVE bụ ụghalaahịa nke ụlọ ọrụ Kinesis. WINDOWS, MAC, MACOS, LINUX, ZMK na ANDROID bụ ihe onwunwe nke ndị nwe ha.
Ozi dị na akwụkwọ a ga-agbanwe na-enweghị ọkwa. Agaghị emepụtagharị ma ọ bụ bufee akụkụ nke akwụkwọ a n'ụdị ọ bụla ma ọ bụ n'ụzọ ọ bụla, kọmputa ma ọ bụ n'ibu, maka ebumnuche azụmahịa ọ bụla, na-enweghị ikikere ederede ederede nke Kinesis Corporation.

Ụlọ ọrụ KINESIS CORP
22030 20th Okporo ụzọ SE, Suite 102
Bothell, Washington 98021 USA
www.kinesis.com

Nkwupụta Nnyonye nnabata Frecency FCC

A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị B, dabere na akụkụ 15 nke Iwu FCC.

Emebere oke ndị a iji nye nchebe ezi uche dị na ya pụọ ​​​​na nnyonye anya na-emerụ ahụ mgbe a na-arụ ọrụ na nrụnye ebe obibi. Akụrụngwa a na-ewepụta, na-eji, ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio.

Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:

• Megharịa ma ọ bụ bugharịa antenna nnata
• Mee ka nkewa dị n'etiti akụrụngwa na nnata
• Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata
• Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka

Ịdọ aka ná ntị
Iji jide n'aka na nrubeisi FCC na-aga n'ihu, onye ọrụ ga-eji naanị eriri njikọ kpuchiri ekpuchi mgbe ị na-ejikọta na kọmputa ma ọ bụ mpụta. Ọzọkwa, mgbanwe ọ bụla na-akwadoghị ma ọ bụ mgbanwe akụrụngwa a ga-emebi ikike onye ọrụ iji rụọ ọrụ.

Nkwuputa nrube isi nke ụlọ ọrụ CANADA
Ngwaọrụ dijitalụ a nke B na-emezu ihe niile achọrọ nke Usoro Ngwá Ọrụ Canada nke Na-akpata.

1.0 Okwu mmalite

Ọganihutage360 bụ ahụigodo a na-eme nke ọma nke na-egosipụta nchekwa nchekwa n'ụgbọ mmiri (“v-Drive) na anaghị eji ọkwọ ụgbọ ala ma ọ bụ ngwanrọ pụrụ iche. Emebere ahụigodo ka emebere ya ngwa ngwa na ngwa ngwa site na iji ụzọ mkpirisi onboard ma ọ bụ site na ngwa SmartSet maka Windows na Mac. Ndị ọrụ ike nwere nhọrọ ịgafe SmartSet GUI na “Programme Direct” kiiboodu na sistemụ arụmọrụ niile site na ịnweta ederede dị mfe nke ahụigodo. files nhazi files.

Ntuziaka ndị a metụtara Advan isitagIhe nlereanya e360 nwere SmartSet Programming Engine. Ọ bụrụ na ị nwere ụdị ọkachamara nwere injin ZMK kwụsịrị ịgụ na gaa https://kinesis-ergo.com/support/adv360-pro.

2.0 Direct Programming Overview

Ọganihutage360 nwere 9 profiles nke nwere usoro nhazi 9 na nhazi ọkụ. Ahụigodo ahụ nwekwara usoro ntọala ahụigodo zuru ụwa ọnụ nke enwere ike ịhazi. A na-echekwa nke ọ bụla n'ime nhazi ndị a na folda nke dị na kiiboodu ("v-Drive") dị ka usoro ederede dị mfe. files (.txt). N'oge mmemme onboard, ahụigodo na-agụ/dere ihe ndị a ozugbo files "n'azụ ihe nkiri". Ihe pụrụ iche banyere 360 ​​bụ na ndị ọrụ ike nwere ike "jikọọ" (aka "mount") v-Drive na PC ha wee dezie nhazi ndị a ozugbo. filedị na Windows, Linux, Mac na Chrome.

Oge ọ bụla a na-emepụta remap ma ọ bụ nnukwu na Profile, edere ya na nhazi ya kwekọrọ.txt file dị ka ahịrị pụrụ iche nke "koodu". Na ọrụ na agba nke ọ bụla n'ime 6 RGB LEDs na-achịkwa na led.txt kwekọrọ file. Oge ọ bụla gbanwere ntọala ahụigodo, a na-edekọ mgbanwe ahụ na “settings.txt” file.

3.0 Tupu ịmalite

3.1 Ndị ọrụ ike naanị
Ndezi ozugbo chọrọ ịmụta ịgụ na ide syntax omenala. Ntinye mkpụrụedemede ezighi ezi n'ime nhazi ọ bụla files nwere ike nweta nsonaazụ na-atụghị anya ya ma nwee ike ịkpata nsogbu nwa oge na ọbụna ọrụ ahụigodo bụ isi. Gụọ ntuziaka mmalite ngwa ngwa na akwụkwọ ntuziaka onye ọrụ wee jiri nlezianya gaa n'ihu.

3.2 Wepụ v-Drive mgbe niile tupu ị kwụpụ v-Drive

V-Drive dị ka draịva ọ bụla ọzọ ị jikọọ na PC gị. Ọ bụrụ na i wepụ ya na mberede ka PC ka na-enweta ọdịnaya draịva ị nwere ike ịkpata file mmebi. Iji chekwaa v-Drive, chekwaa ma mechie nhazi niile files, wee jiri usoro nchụpụ kwesịrị ekwesị maka sistemụ arụmọrụ gị tupu “ịkwụsị” v-Drive na ụzọ mkpirisi onboard. Ọ bụrụ na PC gị ajụ ịchụpụ draịva ahụ, hụ ihe niile files na nchekwa na-emechi wee nwaa ọzọ.

Mwepu Windows: Chekwa ma mechie .txt ọ bụla files ị na-edezi. Site na File Explorer, laghachi azụ na ọkwa dị elu nke “ADV360” mbanye mbughari wee pịa aka nri aha mbanye wee họrọ Wepụ. Ozugbo ị nwetara ọkwa “Safe to Exject” ị nwere ike ịga n'ihu na-emechi v-Drive na ụzọ mkpirisi nọ n'ụgbọ. Ọdịda ịchụpụ nwere ike bute mperi mperi draịva nke Windows ga-arịọ gị ka imezi ya. Usoro "Nyochaa na Mmezi".
(gosiri na nri) dị ngwa ma dị mfe.

3.3 Ndị na-abụghị US
Ekwesịrị ịhazi kọmpụta gị maka nhazi ahụigodo Bekee (US). Ndị ọkwọ ụgbọ ala asụsụ ndị ọzọ na-eji koodu/ọkwa dị iche iche maka ụfọdụ igodo dị oke mkpa maka mkpụrụedemede mmemme dịka [], {} na >.

3.4 Ederede dị mfe Files naanị
Echekwala nhazi files na Ọgaranya Text Format (.rft) dị ka mkpụrụedemede pụrụ iche nwere ike ịkpata njehie syntax.

Enwere ike ịchọ 3.5 firmware
Ụfọdụ atụmatụ akọwara na ntuziaka a nwere ike ịchọ mmelite firmware. Budata firmware wee nweta ntuziaka nwụnye ebe a: https://kinesis-ergo.com/support/adv360/#firmware-updates

4.0 Nhazi mmemme ozugbo

Atụmatụ 360 9 configurable Profiles, nke ọ bụla nwere “nhazi” nke ya kwekọrọ (1-9). A na-echekwa nyiwe ndabara itoolu dị ka iche iche .txt files na nchekwa nchekwa "nhazi" na v-Drive. Naanị mwepu ahaziri ahazi na macro ka echekwara na ya file, Ya mere ọ bụrụ na ọ dịghị mgbanwe e mere na a okirikiri nhọrọ ukwuu, na file ga-abụ ihe efu na ahụigodo na-eme omume "ndabara". Ndị ọrụ nwere ike dee koodu site na ọkọ ma ọ bụ dezie koodu dị site na iji iwu syntax akọwara n'okpuru. Mara: Ihichapụ okirikiri nhọrọ ukwuu file ga-ehichapụ remaps na macro ya echekwara kpamkpam, mana ahụigodo ga-emegharị okirikiri oghere na-akpaghị aka file.

Mara: Profile 0 enweghị mmemme ma yabụ enweghị nhazi kwekọrọ.txt file.

4.1 File Mgbakọ Ịkpọ aha
Naanị okirikiri nhọrọ ukwuu itoolu nwere ike ibunye na Advantage360. Enwere ike ịchekwa okirikiri nhọrọ ukwuu "ndabere" dị ka .txt files nwere aha nkọwa, mana enweghị ike ibunye ha na ahụigodo na-ebughị ụzọ degharịa aha ha.

4.2 Syntax karịrịview– Ọnọdụ & Action Token
A na-edobe ihe nnochite anya na macro na nhazi file na-eji a proprietary syntax. Igodo ọ bụla dị na ahụigodo (na-abụghị nke SmartSet Key) ka ekenyela akara “Ọnọdụ” pụrụ iche nke ejiri mata igodo ahụ maka mmemme n'okirikiri ọ bụla (lee Map Token na mgbakwunye A).

Omume ahụigodo na òké ọ bụla nke 360 ​​kwadoro ka ekenyela akara “Action” pụrụ iche dabara na ọkọlọtọ USB “koodu nyocha”.

View omume na akara ngosi ebe a: https://kinesis-ergo.com/support/adv360/#manuals
Iji megharịa igodo nke ọma, onye ọrụ ga-eji syntax were wepụta igodo anụ ahụ (site na Token ọnọdụ) wee kenye otu igodo ma ọ bụ karịa (site na Action Tokens). A na-eji akara “>” kewapụ akara ngosi ọnọdụ na akara ngosi omume. Akara akara nke ọ bụla nwere akara aka gbara ya gburugburu. Ọpụamples:

• A na-etinye akara nkwụghachi azụ na Brackets Square: [ọnọdụ]>[omume]
• Edebere Macros na Curly Brackets: {akpalite ọnọdụ igodo {modifier co-trigger}>{action1}{action2}…

Dee ihe nnokwa gị n'okpuru "Iyo Ngwunye" achọrọ ka ekenye ya na oyi akwa ahụ

4.3 Atụmatụ nhazi nhazi nhazi

• Ọ bụrụ na ahụigodo enweghị ike ịghọta ntugharị achọrọ, mgbe ahụ omume ndabara ga-anọgide na-adị irè.
• Ejikọtala ma dakọtara square na curly brackets n'otu ahịrị koodu
• Kewapụ ahịrị koodu ọ bụla na Tinye/ nloghachi
• Usoro nke ahịrị koodu na-egosi na .txt file adịghị n'ozuzu mkpa, ma e wezụga na omume nke esemokwu iwu, na nke ikpe kasị nso na ala nke file ga-emejuputa atumatu.
• Token anaghị enwe mmetụta. Ịmepụta ihe nrịbama ego agaghị emepụta ihe omume "gbanwere".
• Enwere ike gbanyụọ ahịrị koodu nwa oge site na itinye akara nrịbama (*) na mbido ahịrị.

4.4 Ngosipụta ọnọdụ

N'ikwu okwu n'ozuzu, a na-akọwa akara ngosi ọnọdụ site na mmemme QWERTY Windows bụ isi maka igodo dị na nhazi ndabara. N'ọnọdụ ụfọdụ, agbanweela akara ngosi maka idoanya na/ma ọ bụ mfe nke mmemme.

• Example: Ọnọdụ Hotkey 1 bụ: [hk1]>…

4.6 Mgbanwe mmemme
Iji hazie ihe ngbanwe, tinye akara ngosi ọnọdụ yana otu akara ngosi na braket square, nke kewara site na “>“. Remap Examples:

1. Hotkey 1 na-eme Q: [hk1]>[q]
2. Igodo mgbapụ na-eme mkpọchi mkpọchi: [esc]>[okpu]

Omume agbanwere Enwere ike ịmegharị mkpụrụedemede (dịka ọmụmaatụ, "!") site na Remap. Iji mepụta ihe omume gbanwere, ọ dị mkpa itinye koodu ya ka nnukwu macro nke gụnyere ma mgbada ala na elu nke igodo ngbanwe gbara isi ihe omume. A na-egosi mgbada ala site n'itinye "-" n'ime bracket na a na-egosi ihe mgbago elu site n'itinye "+". Lee example macro 1 n'okpuru.

4.7 Macros mmemme
Iji hazie nnukwu macro, tinye igodo “trigger” n'aka ekpe nke “>” na curly brackets. Wee tinye koodu otu ma ọ bụ karịa Action Token n'aka nri nke ">" na curly brackets. Macro ọ bụla nwere ike ịgụnye ihe dị ka token 300 Action na nhazi ọ bụla nwere ike ịchekwa ihe ruru 7,200 mkpokọta nnukwu ihe ruru 100 macros.

Igodo mkpalite: Igodo ọ bụla anaghị agbanwe agbanwe nwere ike ịkpalite nnukwu. Enwere ike ịgbakwunye ihe na-akpalite site na itinye koodu mgbanwe n'aka ekpe nke ">". Lee example 1 n'okpuru.

Mara: A naghị atụ aro ndị na-akpalite Windows. Dee nnukwu macro gị n'okpuru "Layer Header" achọrọ.

Prefix ọsọ ọsọ ọkpụkpọ n'otu n'otu {s_}: Site na ndabara, macros niile na-egwu na ọsọ azụghachi azụ ahọpụtara. Iji kenye ọsọ omenala maka ịrụ ọrụ nkwụghachi azụ ka emelitere maka nnukwu macro enyere, ị nwere ike iji prefix "{s_}" "Ọsọ Ọsọ Ọsọ n'otu n'otu". Họrọ nọmba site na 1-9 kwekọrọ na nha ọsọ nke egosiri Nkebi 4.6. Ekwesịrị idowe prefix ọsọ n'aka nri nke ''>' tupu ọdịnaya nnukwu. Lee example 2 n'okpuru.

Prefix ọtụtụ egwuregwu {x_}: Site na ndabara, ịkpọghachi macros niile na-aga n'ihu ka ejiri igodo mkpado. Ka ịkagbu atụmatụ ikwugharị ahụ wee machibido nnukwu ka ọ kpọọghachi otu ugboro ole ị nwere ike iji prefix "Macro Multiplay" {x_}". Họrọ nọmba site na 1-9 dabara na ọnụọgụ oge ịchọrọ ka nnukwu kpọgharịa. Ekwesịrị idowe prefix multiplay n'aka nri nke ">" n'ihu ọdịnaya nnukwu. Lee example 3 n'okpuru. Ọ bụrụ na nnukwu anaghị egwu azụ nke ọma, gbalịa ikenye uru Multiplay nke 1. Macro nwere ike na-agbapụ ọtụtụ ugboro tupu ị na-ahapụ igodo akpalite. Lee example 3 n'okpuru

Oge igbu oge: Enwere ike itinye oge igbu oge n'ime nnukwu iji melite arụmọrụ ọkpụkpọ ma ọ bụ iji mepụta òké pịa ugboro abụọ. Ịkwụ ụgwọ dị na etiti oge ọ bụla n'etiti 1 na 999 millisecond ({d001} & {d999}), gụnyere oge igbu oge ({dran}). Enwere ike ijikọ akara igbu oge iji mepụta igbu oge nke ogologo oge dị iche iche.

Macro Examples:

1. Igodo nkwụsịtụ na-eji isi obodo H rụọ "Hi": {kwụsịtụ}{rctrl}>{-lshft}{h}{+lshft}{i}
2. Hotkey 4 + ekpe Ctrl na-eme "qwerty" na ọsọ 9: {lctrl}{hk4}>{s9}{q}{w}{e}{r}{t}{y}
3. Hotkey 1 na-abawanye olu 3 notches: {hk1}>{x3}{vol+)

4.8 Kpatụ ma jide mmemme

Site na ịpị ma jide, ị nwere ike kenye omume abụọ pụrụ iche n'otu igodo dabere na ogologo oge nke igodo ahụ. Hapụta Token ọnọdụ n'ụdị oyi akwa kwesịrị ekwesị, wee rụọ ọrụ mgbata, wee gbuo oge site na 1 ruo 999 milliseconds site na iji akara Tap na Jide pụrụ iche ({t&hxxx}), wee jide Action. N'ihi oge igbu oge dị n'ime, akwadoghị tap-na-jide maka iji igodo pịnye ọnụọgụgụ. Ọ bụghị isi ihe niile na-akwado Kpatụ-na-Jide.

Mara: Maka ọtụtụ ngwa, anyị na-akwado igbu oge nke 250ms.

Pịa wee jide ExampLe:

• Caps na-eme okpu mgbe a na-akụ ya na Esc mgbe ejidere ya ogologo oge karịa 500ms: [caps]>[caps][t&h500][esc]

5.0 Direct Programming RGB LEDs

Ihe ngosi 360 3 RGB LED nwere ike ime na modul igodo ọ bụla. A na-echekwa mmetụta ọkụ ndabara itoolu dị ka iche iche .txt files na nchekwa nchekwa "ọkụ" na v-Drive. Egosiri ọrụ ndabara n'okpuru. Mara: Ọ bụrụ na file oghere, egosi ga-enwe nkwarụ.

5.1 Kọwaa ihe ngosi gị

Modul igodo akaekpe
Aka ekpe = Mkpọchi okpu (Gbanye/ Gbanyụọ)
Middle = Profile (0-9)
Right = Layer (Base, Kp, Fn1, Fn2, Fn3)

Modul igodo aka nri
Aka ekpe = Mkpọchi ọnụọgụ (Gbanye/ Gbanyụọ)
N'etiti = Mkpọchi mpịakọta (Gbanye / Gbanyụọ)
Right = Layer (Base, Kp, Fn1, Fn2, Fn3)

A na-akọwa ihe nrịbama 6 ahụ site na iji akara ọnọdụ ọnọdụ

• Modul akaekpe akaekpe LED: [IND1]
• Modul ekpe nke etiti LED: [IND2]
• Modulu akaekpe aka nri: [IND3]
• Modul aka nri akaekpe LED: [IND4]
• Modul aka nri etiti LED: [IND5]
• Modul akanri aka nri: [IND6]

5.2 Kọwaa ọrụ gị
A na-akwado ọrụ dị iche iche yana enwere ike ịgbakwunye ndị ọzọ n'ọdịnihu.

• Gbanyụọ LED: [null]
• Pro na-arụ ọrụfile: [prof]
• Mkpọchi okpu (Gbanye/ Gbanyụọ): [okpu]
• Mkpọchi ọnụọgụ (Gbanye/ Gbanyụọ): [nmlk]
• Mkpọchi pịgharịa (Gbanye/ Gbanyụọ): [sclk]
• Layer na-arụ ọrụ:
• Isi: [layed]
• Ahụigodo: [layk]
• Fn: [lay1]
• Fn2: [lay2]
• Fn3: [lee]

5.3 Kọwaa Agba (s) gị
Ewezuga Layer, enwere ike kenye ọrụ ọ bụla otu uru agba site na iji ọnụọgụ ọnụọgụ 9 dabara na uru RGB nke agba achọrọ (0-255). Ọrụ Layer na-akwado ọrụ ruru agba ise, otu maka oyi akwa ọ bụla.

5.4 Okwu
A na-edobe akara ngosi ọ bụla n'otu ụzọ ahụ nke nkwụghachi azụ. Jiri akara ngosi ọnọdụ, ">" wee rụọ ọrụ, na agba. N'ihi na Layer LED ị ga-mkpa dee a iche iche ahịrị nke syntax maka ọ bụla oyi akwa

[IND_]>[FUNC][RRR][GGG][BBB]

Ihe mgbakwunye A - Map Token ọnọdụ

 

 

 

Akwụkwọ / akụrụngwa

	Injin mmemme KINESIS KB360 SmartSet [pdf] Ntuziaka onye ọrụ Injin mmemme KB360 SmartSet, KB360, Igwe mmemme SmartSet
	Injin mmemme KINESIS KB360 SmartSet [pdf] Ntuziaka onye ọrụ Injin mmemme KB360 SmartSet, KB360, Njin mmemme SmartSet, Injin mmemme, injin

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ