Idea EVO20-M Tsarin Tsarin Layi

Sistema de Line Array ƙwararriyar 2 vías

KARSHEVIEW

EVO20-M ƙwararriyar 2-hanyar aiki dual 10 "Layin Array tsarin yana ba da kyakkyawan aikin sonic da aminci a cikin fakitin dacewa da farashi mai tsada wanda ya dace da duk ka'idodin ƙwararrun masana'antar sauti, wanda ke nuna manyan transducers na Turai da kayan lantarki, ƙa'idodin aminci na Turai da takaddun shaida, ingantaccen gini da gamawa da matsakaicin sauƙi na daidaitawa, saiti da aiki.
EVO20-M sigar ingantaccen tsarin EVO20 Layin Layi ne mai ƙima wanda ke fasalta ingantattun saitunan DSP masu iyaka, mafi girman ikon sarrafa kai tsaye (tare da ƙara flanges na kwance a kwance da matattara mai wucewa ta MF), ingantaccen jiyya na kayan acoustic na ciki da haɓaka amsawar LF.
An yi la'akari da shi azaman babban tsari a cikin ƙwararrun sauti na šaukuwa ko aikace-aikacen yawon shakatawa, EVO20-M kuma na iya zama mafi kyawun zaɓi don High SPL shigarwa don sautin Club, wuraren wasanni ko wuraren wasan kwaikwayo.

Siffofin

• 1.2 KW Class D AmpModule mai haske/DSP (na Powersoft)
• Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararrun IDEA na al'ada
• IDEA Babban-Q 8-slot-slot line-array waveguide na mallakar mallaka tare da flanges sarrafa kai tsaye
• Sadaukarwa MF m tace
• Matsayi 10 Haɗe-haɗe na daidaitattun riging don daidaitawa da jeri
• 2 hadedde iyawa
• Rugged da dorewa 15 mm Birch Plywood gini da gamawa
• 1.5 mm Aquaforce rufin karfe gasa tare da kumfa mai kariya na ciki
• Fenti mai dorewa na Aquaforce, ana samun shi cikin daidaitaccen rubutu baki ko fari, launuka na RAL na zaɓi (kan buƙata)
• Na'urorin haɗi na sadaukar da kai/ajiya/kaya da firam ɗin tashi
• Daidaita saitunan subwoofer tare da BASSO36-A (2 × 18")
•  Daidaita saitunan subwoofer tare da BASSO21-A (1 × 21")

Aikace-aikace

• Babban SPL A/V ƙaramar sauti mai ɗaukuwa
• FOH don matsakaicin girman wuraren wasan kwaikwayo da kulake
• Babban tsarin don Yawon shakatawa na Yanki da Kamfanonin haya
• Cika-ƙasa ko tsarin tallafi don mafi girman tsarin PA/ Line Array

Bayanan fasaha

Yadi zane	10-trapezoidal
LF Masu Fassarawa	2 × 10 "Woofers mai girma
HF Masu Fassarawa	1 × ƙwanƙwasa direba, 1.4 ″ diamita na ƙaho, 75 mm (3 in) muryar murya
Class D Amp Ci gaba Ƙarfi	1.2 kW
DSP	24bit @ 48kHz AD/DA - 4 saitunan da za a iya zaɓa: Saiti1: 4-6 abubuwan tsararru Preset2: 6-8 tsararrun abubuwa Saiti3: 8-12 abubuwan tsarawa Saiti4: 12-16 abubuwan tsararru
Nufin / Hasashen Software	SAUKI MATSALAR
Farashin SPL (Ci gaba/Kololuwa)	127/133 dB SPL
Yawanci Rage (-10 dB)	66 - 20000 Hz
Yawanci Rage (-3 dB)	88 - 17000 Hz
Rufewa	90˚ Hankali
Masu Haɗin Siginar Sauti Shigarwa Fitowa	Farashin XLR
AC Masu haɗawa	2 x Neutrik® PowerCON
Ƙarfi wadata	Universal, yanayin sauya tsari
Na suna Ƙarfi Abubuwan bukatu	100 - 240 V 50-60 Hz
A halin yanzu Amfani	1.3 A
Majalisar ministoci Gina	15 mm Birch Plywood
Grille	1.5 mm perforated weatherised karfe tare da m kumfa
Gama	Mai ɗorewa IDEA na mallakar Aquaforce High Resistance fenti tsari
Kayan rigingimun	Babban juriya, ƙarfe mai rufi hadedde 4-point rigging hardware maki 10 angulation (0˚-10˚ na ciki splay kwana a cikin 1˚mataki)
Girma (W × H × D)	626 × 278 × 570 mm
Nauyi	37 kg
Hannu	2 hadedde iyawa
Na'urorin haɗi	Rufin ruwan sama mai ƙarfi (RC-EV20, haɗe) Firam ɗin riging (RF-EVO20) Riging frame stack (RF-EVO20-STK) Katin sufuri (CRT-EVO20)

Zane na Fasaha

Dsp/amp ikon module

EVO20-M Bi-Amp 1000 W Class-D lasifika mai sarrafa kansa sanye take da masu haɗin PowerCON 32A Main da masu haɗin siginar sauti na XLR waɗanda ke ba da izini mai sauƙi, madaidaiciyar iko da haɗin sauti na abubuwan tsararru.

Ƙungiyar Hagu

• Mais IN:
  32A PowerCON Mains IN connector.
• Mafita:
  32A PowerCON Mains OUT connector.

Ƙungiyar Dama

• Sigina IN:
  Daidaitaccen mai haɗin shigar da shigar XLR mai jiwuwa
• Fitar da Sigina:
  Madaidaicin mai haɗawa XLR mai jiwuwa
• Zaɓi Saiti:
  Danna don kunna tsakanin saitattun saitattu 4 da aka riga aka loda
• LEDs masu aiki:
  Alamun gani na amp matsayin module
• Shirye:
  Naúrar tana aiki kuma a shirye take
• Alamar:
  Ayyukan siginar sauti
• Temp:
  Madaidaicin mai haɗawa XLR mai jiwuwa
• Iyaka:
  Limiter shine actvie
• Matsayin Riba:
  Amp sami matakin ƙulli tare da tsalle-tsalle 40
• Saita Mai Aiki:
  Alamar gani don lambar saiti mai aiki

Voltage zabe

• EVO20-M's hadedde ikon module yana fasalta masu zaɓin Input na Main guda biyu daban-daban don aiki a 240 V da 115 V.
• Kodayake duk tsarin EVO20-M ana ba da sabis a shirye don aiki a daidai voltage na yankin da ake jigilar shi zuwa daga masana'anta, lokacin da aka kafa tsarin a karon farko, muna ba da shawarar sosai don bincika idan ma'aunin wutar lantarki Main connector ya dace da wutar lantarki ta AC.tage.
• Don yin haka, kawai ana buƙatar cire skru na zafin rana kuma duba wane matsayi aka haɗa Input ɗin Main zuwa, kamar yadda aka nuna a cikin zane.

  

Kanfigareshan tsarin

Jagoran gabatarwa akan tsarin tsarin Layi-Array
Lines-Arrays suna aiki saboda hulɗar masu fassara daban-daban a cikin kowane ɓangaren tsararru. Wasu daga cikin waɗannan mu'amala suna haifar da mummunan sakamako, kamar su karkacewa da shari'a, fa'idodin jimlar makamashi da matakin sarrafa kai tsaye a matsayin advan.tages na amfani da tsarin Line-Array.
IDEA DSP Line-Array saituna suna nufin sauƙaƙe hanya mai sauƙi ga saitin layin-Array da ƙaddamarwa da kuma mayar da hankali kan muhimman abubuwa guda biyu waɗanda ke shafar halayen tsararru dangane da kai tsaye da kuma mitar amsawa.

Tsawon Tsari
Abu na farko shine Tsawon Array, wanda ke rinjayar kewayon mitoci wanda layin amsawar jigon ya shafi jimlar nisa tsakanin axis na duk trans-ducers masu daidaitawa a cikin jirgin sama na tsaye.
Wannan sanannen sananne ne a cikin LF, kamar yadda LF woofers, saboda kusancin su dangane da izinin band ɗin su, jimlar kuzarin ƙararrawa musamman yadda ya kamata, kuma suna buƙatar diyya na amplitude na siginar LF daga madaidaicin juzu'i tare da subwoofers har zuwa maki daban-daban dangane da adadin abubuwan da ke cikin tsararru.
Don wannan dalili an haɗa Saitunan a cikin Tsarukan Tsaru huɗu/Kidaya: 4 -6, 6-8, 8-12 da 12-16.

Array Curvature
Mabuɗin maɓalli na biyu don saitin DSP na Arrays shine karkatar da tsararru. Haɗin kusurwoyi da yawa daban-daban na iya saita masu aiki na layin-Array, suna haɓaka ɗaukar hoto na tsaye da ake buƙata don aikace-aikacen.
Masu amfani za su iya amfani da EASE FOCUS azaman jagora don nemo ingantattun kusurwoyi na ciki tsakanin abubuwan tsararru.
Lura cewa jimillar kusurwoyin splay na ciki da madaidaicin kusurwoyin ɗaukar hoto na tsararru ba sa daidaita kai tsaye kuma dangantakarsu ta bambanta da tsayin tsararru. (duba examples)

IDEA DSP saituna
Saitunan IDEA DSP suna aiki a cikin nau'ikan 3 na matsakaicin Array:

• MARAMIN (<30° Ya Shawarci Tarin Ciki Splay Angulation Sum)
• MEDIUM (30-60° Ya Shawarar Ciki Mai Tsare Tsare Tsararre)
• MAXIMUM (> 60° Ya Shawarar Ciki Splay Angulation Sum)

Sauƙaƙe Mayar da hankali Software
EVO20-M Sauƙaƙe Mayar da hankali GLL files suna samuwa don saukewa daga shafin samfurin da kuma daga sashin ma'ajiyar abubuwan Zazzagewa.

MATSALAR ARRAY

<30° Ya Shawarar Ciki Splay Angulation Sum
Ƙananan kusurwoyi na splay na ciki suna haifar da ƙarin tsararrun "madaidaitan" waɗanda ke ba da ƙarin ƙarfin HF akan acoustical axis na Array, suna samun ƙarfin HF mafi girma akan nisa mafi girma (inganta "jifa") amma yana rage ɗaukar hoto mai amfani.

Ana samun waɗannan saitunan don TEOd9 da sauran na'urori masu sarrafawa na Stan-dalone DSP na waje don tsarin IDEA Active Line-Array kamar EVO20-M, kuma an haɗa su cikin Tsarin IDEA-AmpAbubuwan da aka bayar na DSP Solutions.

MATSAKI ARRAY

30°- 60° Shawarar Takaitaccen Takaitaccen Ciki
Wannan shine matakin mafi fa'ida na ɗaukar hoto a tsaye don mafi yawan aikace-aikacen Layi-Array mai gudana kuma zai tabbatar da daidaiton ɗaukar hoto da SPL a cikin yankin sauraron don yawancin aikace-aikacen.

Ana samun waɗannan saitattun saitattun a matsayin ma'auni a cikin EVO20-M hadedde DSP kuma ana iya zaɓar su kai tsaye daga madaidaicin fakitin baya kamar yadda aka nuna a Sashin wannan takaddar.

MATSALAR ARRAY

60° Shawarar Ciki Splay Angulation Sum
Ƙididdiga mafi girma na kusurwa na ciki yana haifar da mafi girma curvatures, tare da faffadan tsarin ɗaukar hoto da ƙarancin jimlar ƙarfin HF. Ana samun irin wannan nau'in angling a cikin Arrays tare da ƙaramin akwati ko a cikin manyan tsararru waɗanda aka jera ƙasa ko shigar da su kusa da manyan ɗakuna a filayen wasanni.
Ana samun waɗannan saitunan don TEOd9 da sauran na'urori masu sarrafawa na Stan-dalone DSP na waje don tsarin IDEA Active Line-Array kamar EVO20-M, kuma an haɗa su cikin Tsarin IDEA-AmpAbubuwan da aka bayar na DSP Solutions.

Rigging Da Shigarwa

EVO20-M Line-Array abubuwa sun ƙunshi haɗaɗɗen kayan aikin riging na ƙarfe musamman wanda aka ƙera don sauƙi na saiti da amfani. Har zuwa 10 zaɓuɓɓukan angulation na ciki a cikin matakan 1° suna samuwa kuma ana keɓance matsayi na stow don daidaitaccen aiki da sauri na tsararru.
Abubuwan da ke biyo baya sune tushen haɗin haɗin gwargwado.

GASKIYAR JAGORA

1. Don ci gaba da saita tsararrun, saki da buɗe hanyoyin haɗin gaba da baya na mafi ƙasƙanci a cikin tsarin.
2. Sanya matsayi da kulle mahaɗin gaba da baya na abubuwan da ke biyo baya a cikin tsararru ta amfani da fitattun fil ɗin da aka adana a cikin ramin sadaukar da aka yi wa lakabi da Stow.
3. A ƙarshe kulle wurin da ake so tare da keɓaɓɓen fil da aka adana a cikin ramin Groundstack/Stow. Maimaita aikin don kowane nau'in EVO20-M a cikin tsarin.

   

HANYAR DAKATA TSARIN SHAWARAR

Kanfigareshan Example

Gargaɗi Akan Jagororin Tsaro

• Karanta wannan daftarin aiki sosai, bi duk gargaɗin aminci kuma a adana shi don tunani na gaba.
• Alamar tsawa a cikin alwatika yana nuna cewa duk wani aikin gyarawa da maye gurbin kayan aikin dole ne a yi ta ƙwararrun ma'aikata da izini.
• Babu sassa masu amfani a ciki.
• Yi amfani da na'urorin haɗi kawai waɗanda IDEA ta gwada kuma ta yarda kuma mai ƙira ko dillali mai izini ya kawo.
• ƙwararrun ma'aikata dole ne su yi shigarwa, damfara da ayyukan dakatarwa.
• Wannan na'urar Class I ce. Kar a cire ƙasa mai haɗin yanar gizo.
• Yi amfani da na'urorin haɗi kawai da IDEA ta kayyade, biyan madaidaicin ƙayyadaddun kaya da bin ƙa'idodin aminci na gida.
• Karanta ƙayyadaddun ƙayyadaddun bayanai da umarnin haɗin kai kafin ci gaba don haɗa tsarin kuma yi amfani da kebul kawai da IDEA ta kawo ko shawarar. Haɗin tsarin ya kamata a yi ta ƙwararrun ma'aikata.
• Ƙwararrun tsarin ƙarfafa sauti na iya sadar da manyan matakan SPL wanda zai iya haifar da lalacewar ji. Kada ku tsaya kusa da tsarin yayin da ake amfani da su.
• Lasifika yana samar da filin maganadisu ko da ba sa amfani da su ko ma lokacin da aka cire su. Kar a sanya ko bijirar da lasifika zuwa kowace na'ura mai kula da filayen maganadisu kamar na'urar duba talabijin ko kayan maganadisu na ajiyar bayanai.
• Ajiye kayan aiki a cikin amintaccen yanayin zafin aiki [0º-45º] a kowane lokaci.
• Cire haɗin kayan aiki yayin guguwar walƙiya da lokacin da ba za a yi amfani da shi na dogon lokaci ba.
•  Kada a bijirar da wannan na'urar ga ruwan sama ko danshi.
• Kar a sanya wani abu mai dauke da ruwa, kamar kwalabe ko gilashin, a saman naúrar. Kar a watsa ruwa a kan naúrar.
• Tsaftace da rigar riga. Kada a yi amfani da masu tsabta na tushen ƙarfi.
• Duba gidajen lasifikar da na'urorin haɗi akai-akai don alamun lalacewa da tsagewa, kuma musanya su idan ya cancanta.
• Koma duk hidima ga ƙwararrun ma'aikatan sabis.
• Wannan alamar akan samfurin tana nuna cewa bai kamata a kula da wannan samfurin azaman sharar gida ba. Bi ƙa'idar gida don sake yin amfani da na'urorin lantarki.
• IDEA ta ƙi kowane alhakin rashin amfani da zai iya haifar da rashin aiki ko lalata kayan aiki.

Garanti

• Ana ba da garantin duk samfuran IDEA akan kowane lahani na masana'antu na tsawon shekaru 5 daga ranar siyan kayan acousti-cal da shekaru 2 daga ranar siyan na'urorin lantarki.
• Garanti ya keɓe lalacewa daga rashin amfani da samfur.
• Duk wani garanti na gyara, sauyawa da sabis dole ne masana'anta su keɓance ko ɗaya daga cikin cibiyoyin sabis masu izini.
• Kar a buɗe ko niyyar gyara samfurin; in ba haka ba ba za a yi amfani da sabis da musanya don gyara garanti ba.
• Mayar da sashin da ya lalace, cikin haɗarin mai jigilar kaya da wanda aka riga aka biya na kaya, zuwa cibiyar sabis mafi kusa tare da kwafin daftarin siyan don neman sabis na garanti ko sauyawa.

Bayanin Daidaitawa

I MAS D Electroacústica SL , Pol. A Trabe 19-20 15350 CEDEIRA (Galicia - Spain), ta bayyana cewa EVO20-M ya bi umarnin EU masu zuwa:

• RoHS (2002/95/CE) Ƙuntatawa na Abubuwa masu haɗari
• LVD (2006/95/CE) Ƙananan Voltage Umurni
• EMC (2004/108/CE) Daidaituwar Lantarki-Magnetic
• WEEE (2002/96/CE) Sharar Kayan Wuta da Lantarki
• TS EN 60065: 2002 Audio, bidiyo da makamantan na'urorin lantarki. Bukatun aminci.
• TS EN 55103-1 Daidaitawar wutar lantarki: 1996
• TS EN 55103-2 Daidaitawar wutar lantarki: 1996

I MÁS D ELECTROACÚSTICA SL
Pol A Trabe 19-20, 15350 - Cedeira, A Coruña (España) Tel. + 34 881 545 135
www.ideaproaudio.com
info@ideaproaudio.com
Ƙayyadaddun ƙayyadaddun bayanai da bayyanar samfur na iya canzawa ba tare da sanarwa ba. Las especificaciones y aparienca del prodcuto pueden estar sujetas a cambios.
IDEA_EVO20-M_UM-BIL_v4.0 | 4-2024

Takardu / Albarkatu

Idea EVO20-M Tsarin Tsarin Layi [pdf] Manual mai amfani Tsarin Layi na EVO20-M, EVO20-M, Tsarin Tsarin Layi, Tsarin Tsara, Tsari

Magana

• Manual mai amfani