HYDRO Systems EvoClean tare da Jimillar Mai Kula da Eclipse

Kariyar Tsaro

W ARNING! Da fatan za a karanta waɗannan gargaɗin a hankali kuma ku bi duk lambobi da ƙa'idodi na gida.

• sanya tufafi masu kariya da kayan ido lokacin rarraba sinadarai ko wasu kayan, lokacin aiki a kusa da sinadarai, da lokacin cika ko zubar da kayan aiki
• koyaushe karanta kuma bi duk umarnin aminci a cikin takaddun bayanan aminci (SDS) don duk sunadarai. kiyaye duk aminci da umarnin kulawa na masana'anta sinadarai. tsarma da rarraba sinadarai daidai da umarnin masana'antun sinadarai. fitarwa kai tsaye daga kai da sauran mutane zuwa cikin kwantena da aka yarda. bincika kayan aiki akai-akai da kiyaye kayan aiki da tsabta da kiyaye su yadda ya kamata. shigar ta amfani da ƙwararren masani kawai, daidai da duk lambobin lantarki da na famfo. cire haɗin duk wutar lantarki don rarrabawa yayin shigarwa, sabis, da/ko kowane lokacin da aka buɗe majalisar mai rarrabawa.
• KADA KA KYAUTA sinadarai marasa jituwa waɗanda ke haifar da haɗari.

 Abubuwan Kunshin

1) Mai Rarraba EvoClean (lambar ɓangaren ya bambanta da ƙira)	5) Kit ɗin Tubu mai ɗaukar sinadari (na zaɓi) (lambar ɓangaren ya bambanta da ƙira)
2) Jagorar farawa mai sauri (ba a nuna) (P/N HYD20-08808-00)	6) Mai hana Komawa (na zaɓi) (P/N HYD105)
3) Kit ɗin Na'urorin haɗi (ba a nuna) (Maƙallan hawa da kayan masarufi)	7) Injin Interface (na zaɓi) (P/N HYD10-03609-00)
4) Inline Umbrella Check Kit (ba a nuna) (lambar ɓangaren ya bambanta da ƙira)	8) Jimlar Mai Kula da Eclipse (na zaɓi) (P/N HYD01-08900-11)

 a kanview

Lambobin Samfura da Fasali

Zaɓuɓɓukan Gina EvoClean:

• Yawan Samfura: 4 = 4 Kayayyaki 6 = 6 Kayayyaki 8 = 8 Kayayyaki
• Matsakaicin Yaɗawa: L = Ƙarƙashin Guda H = Babban Gudu
• Duba Girman Barb Valve: 2 = 1/4 inch Barb 3 = 3/8 inch Barb 5 = 1/2 inch Barb
• Girman Barb Outlet: 3 = 3/8 inch 5 = 1/2 inch
• Salon Shigar Ruwa: G = Lambun J = John Guest B = BSP
• Jimlar Kusufin
• Haɗa Mai Sarrafa: Ee = An Haɗe Mai Sarrafa TE (blank) = Ba a Haɗe Mai Kula da TE
• Na'ura Interface: Ee = Na'ura Interface Ya Hade (MI) Hade (blank) = Ba a Haɗe Interface Machine

Shahararrun Samfuran NA
Saukewa: HYDE124L35GTEM	HYD	E12	4	L	3	5	G	Ee	Ee
Saukewa: HYDE124H35GTEM	HYD	E12	4	H	3	5	G	Ee	Ee
Saukewa: HYDE124L35G	HYD	E12	4	L	3	5	G
Saukewa: HYDE124H35G	HYD	E12	4	H	3	5	G
Saukewa: HYDE126L35GTEM	HYD	E12	6	L	3	5	G	Ee	Ee
Saukewa: HYDE126H35GTEM	HYD	E12	6	H	3	5	G	Ee	Ee
Saukewa: HYDE126L35G	HYD	E12	6	L	3	5	G
Saukewa: HYDE126H35G	HYD	E12	6	H	3	5	G
Saukewa: HYDE128L35GTEM	HYD	E12	8	L	3	5	G	Ee	Ee
Saukewa: HYDE128H35GTEM	HYD	E12	8	H	3	5	G	Ee	Ee
Saukewa: HYDE128L35G	HYD	E12	8	L	3	5	G
Saukewa: HYDE128H35G	HYD	E12	8	H	3	5	G

Shahararrun Samfuran APAC

Saukewa: HYDE124L35BTEMAPAC	HYD	E12	4	L	3	5	B	Ee	Ee
Saukewa: HYDE124H35BTEMAPAC	HYD	E12	4	H	3	5	B	Ee	Ee
Saukewa: HYDE126L35BTEMAPAC	HYD	E12	6	L	3	5	B	Ee	Ee
Saukewa: HYDE126H35BTEMAPAC	HYD	E12	6	H	3	5	B	Ee	Ee
Saukewa: HYDE128L35BTEMAPAC	HYD	E12	8	L	3	5	B	Ee	Ee
Saukewa: HYDE128H35BTEMAPAC	HYD	E12	8	H	3	5	B	Ee	Ee
Saukewa: HYDE124L55BTEMAPAC	HYD	E12	4	L	5	5	B	Ee	Ee
Saukewa: HYDE124H55BTEMAPAC	HYD	E12	4	H	5	5	B	Ee	Ee
Saukewa: HYDE126L55BTEMAPAC	HYD	E12	6	L	5	5	B	Ee	Ee
Saukewa: HYDE126H55BTEMAPAC	HYD	E12	6	H	5	5	B	Ee	Ee
Saukewa: HYDE128L55BTEMAPAC	HYD	E12	8	L	5	5	B	Ee	Ee
Saukewa: HYDE128H55BTEMAPAC	HYD	E12	8	H	5	5	B	Ee	Ee

 Gabaɗaya Bayani

Kashi	Ƙayyadaddun bayanai
Lantarki (Masu rarrabawa)	110V zuwa 240V AC a 50-60 Hz har zuwa 0.8 Amps
Matsalolin Ruwa	Mafi ƙarancin: 25 PSI ( Bar 1.5 - 0.18mPa) Matsakaicin: 90 PSI (Bar 6 – 0.6mPa)
Ƙimar Ruwa Mai Shigarwa	Tsakanin 40°F da 140°F (5°C da 60°C)
Kimanta Zazzabi na Chemical	Ya kamata sinadarai masu sha su kasance a cikin zafin daki
Kayan Majalisar	Gaba: ASA	Saukewa: PP-TF
Muhalli	Lalacewa: Degree 2, Zazzabi: 50°-160°F (10°-50°C), Matsakaicin Lashi: 95% Dangi
Amincewa da Ka'idoji	Amirka ta Arewa: Yayi daidai da: ANSI/UL Std. 60730-1:2016 5 An ba da izini zuwa: CAN/CSA Std. E60730-1 2016 Ed. 5 Duniya: Yayi daidai da: 2014/35/EU Yayi daidai da: 2014/30/EU Tabbacin zuwa: IEC 60730-1: 2013, AMD1: 2015 Tabbacin zuwa: EN 61236-1: 2013
Girma	4- Samfura:	8.7 a (220 mm) Babban x 10.7 a cikin (270 mm) Fadi x 6.4 a (162 mm) Zurfin
	6- Samfura:	8.7 a (220 mm) Babban x 14.2 a cikin (360 mm) Fadi x 6.4 a (162 mm) Zurfin
	8- Samfura:	8.7 a (220 mm) Babban x 22.2 a cikin (565 mm) Fadi x 6.4 a (162 mm) Zurfin

 shigarwa

HANKALI! Kafin shigarwa yana da kyau don kammala binciken yanar gizon don tabbatar da cewa za a iya shigar da EvoClean a cikin wani wuri wanda ya dace da duk bukatun da aka jera a ƙasa.

• ƙwararren ƙwararren masani ne zai shigar da sashin; Ya kamata a kiyaye dukkan ka'idojin lantarki da na ruwa na gida da na kasa.
•  Kada a shigar da naúrar kusa da wuraren da ke fama da canjin zafin jiki, hasken rana kai tsaye, sanyi ko danshi kowane iri.
•  Dole ne yankin ya zama mara ƙarfi na ƙarar wutar lantarki.
• Tabbatar cewa za a iya hawa naúrar a wuri mai sauƙi sama da tsayin wurin fitarwa da ake buƙata.
•  Tabbatar cewa akwai madaidaicin tushen wutar lantarki tsakanin madaidaicin igiyar wutar lantarki mai ƙafa 8.
• Dole ne a ɗora naúrar akan bangon da ya dace, wanda yake lebur kuma mai ma'ana zuwa ƙasa.
• Wurin naúrar ya kamata ya haskaka da kyau don kowane kulawa kuma ba tare da babban matakan ƙura / barbashi na iska ba.
• Ya kamata a gudanar da tsare-tsaren tsare-tsare akan na'urar aƙalla sau ɗaya a shekara.
•  Ana iya buƙatar na'urar rigakafin dawowar da aka amince da ita - ba a bayar da ita ba - don aminci da aiki na doka. Hydro Systems yana ba da na'urar rigakafin da aka amince da ita a matsayin zaɓi, idan ana buƙatar ɗaya (lambar ɓangaren HYD105).

 Kit na hawa dutse

1.  Zaɓi wuri kusa da injin wanki. Yi amfani da madaidaicin hawa don yiwa alama wurin hawan da ya dace kuma azaman samfurin rami don yiwa ramukan tsaro alama.
2.  An ba da anka na bango, da fatan za a tabbatar sun dace da bango/ saman da ake ɗora zuwa.
3.  Hana na'ura mai rarrabawa akan madaurin hawa. Danna ƙasa shirye-shiryen bidiyo don amintar da naúrar.

4) Tabbatar da mai rarrabawa a ƙasa, tare da sauran dunƙule da aka bayar.
ABIN LURA! Da fatan za a kiyaye kowane igiyoyi don kada su haifar da haɗari ga mai aiki.

Ruwa mai shigowa

GARGADI! Tabbatar cewa an goyan bayan bututun samar da ruwa mai shigowa don hana damuwa mara amfani akan dacewa da shigarwar.

1. Haɗa samar da ruwa mai shigowa ta amfani da kayan aiki da aka tanadar. Wannan zai zama ko dai ya zama madaidaicin 3/4 '' mata Lambun Hose mai dacewa, ko 1/2" OD mai haɗin tura-fit.
2. Ana iya buƙatar na'urar rigakafin dawowar da aka amince da ita - ba a bayar da ita ba - don aminci da aiki na doka. Hydro Systems yana ba da na'urar rigakafin da aka amince da ita a matsayin zaɓi, idan ana buƙatar ɗaya (lambar ɓangaren HYD105).

Ko da yake yana yiwuwa a sami mashigar ruwa a kowane gefen na'ura mai ba da wutar lantarki, kullun zai buƙaci ya kasance a dama.Hanyar Cire Tushen Zuwa Inji

1.  Haɗa kanti (duba sama) zuwa injin wanki ta amfani da 1/2" ID mai sassauƙan tiyon PVC.
2. Amintaccen bututun PVC zuwa barb tare da tiyo clamp.2.O5

Tubuyoyin Karɓar Ruwa

1.  Bude majalisar.
2. Ana kawo bawul ɗin duba a ware, a cikin jaka tare da naúrar. Don hana lalacewa ga mai rarrabawa, shigar da hoses zuwa bawul ɗin duba kafin haɗa bawul ɗin rajistan zuwa manifold!
3.  An keɓe malamai daga hagu zuwa dama
4. Auna nisan hanyar bututun da za a yi amfani da su, daga malami zuwa gindin kwandon sinadari.
5.  Yanke bututun bututun PVC mai sassauƙa na ID na 3/8 zuwa wancan tsayin. (Akwai madadin bawul ɗin dubawa da zaɓuɓɓukan bututu. Tuntuɓi Hydro Systems don ƙarin bayani.)
6.  Matsa bututun PVC akan bawul ɗin rajistan da aka keɓe kuma a tsare tare da tayen kebul, sa'an nan kuma danna gwiwar hannu ɗin rajistan shiga cikin malami kuma a tsare tare da shirin turawa, kamar yadda aka nuna a zanen da ke ƙasa.
7. Shigar da bawul ɗin bincike na cikin layi tsakanin mai rarrabawa da kwandon sinadarai, kusa da akwati gwargwadon yiwuwa. Dole ne a shigar da su a tsaye ba a kusurwa ko a kwance ba; kuma dole ne kwararar kwararar ta dace da kibiyar daidaitawa a jikin bawul Yanke barbs zuwa girman girman da ya dace da bututun shan sinadarai. NOTE: Bawul ɗin duba launin toka suna da hatimin EPDM kuma dole ne a yi amfani da su tare da samfuran alkaline kawai. Bawul ɗin duba shuɗi suna da hatimin Viton kuma yakamata a yi amfani da su don duk wasu sinadarai.
8.  Sanya bututun shigar a cikin akwati, ko kuma idan amfani da marufi mai rufaffiyar madauki haɗa bututun shigarwa zuwa akwati.

GARGADI! Kada kayi ƙoƙarin yin "tee" hoses shan sinadarai don ciyar da malamai da yawa ko masu rarrabawa! Asarar babban abinci ko rashin isasshen abinci na iya haifar da shi. Koyaushe gudanar da bututun shan mutum ɗaya zuwa cikin kwandon sinadarai.

 Haɗin Wuta

1. Shigar da Total Eclipse controller da Machine Interface ta amfani da keɓantaccen takardar koyarwa na waɗannan samfuran.
2.  Haɗa mai rarrabawar EvoClean zuwa Total Eclipse mai sarrafa ta hanyar kebul na J1 da aka riga aka yi wa waya da ke zuwa daga mai rarrabawa.
3.  Haɗa igiyar wutar lantarki ta EvoClean zuwa wadatar da ta dace tana samar da 110V zuwa 240V AC a 50-60 Hz har zuwa 0.8 Amps.
4.  Abu ne na doka don ba da izinin cire haɗin na'urar daga wutar lantarki bayan shigarwa. Ana iya samun katsewar ta hanyar samun damar filogi ko ta haɗa mai sauyawa a cikin ƙayyadaddun wayoyi daidai da ka'idojin wayar.

GARGADI! Wayoyi da bututun da aka bari a kwance rataye na iya zama haɗari mai haɗari, kuma suna iya haifar da lalacewar kayan aiki. Tabbatar cewa duk igiyoyin suna amintacce. Tabbatar cewa bututun zai fita daga hanyoyin tafiya kuma ba zai hana motsi da ake buƙata a yankin ba. Ƙirƙirar ƙaramin wuri a cikin gudu na bututu zai rage magudanar ruwa daga bututun.

 kiyayewa

Shiri

1. Cire kebul ɗin wuta daga bango don cire haɗin babban wutar lantarki mai shigowa.
2.  Kashe hanyar samar da ruwa zuwa tsarin kuma cire haɗin layin samar da ruwa mai shiga da bututun fitarwa.
3.  Yi amfani da screwdriver na Phillips don sassauta dunƙulewa da buɗe murfin gaban abin rufewa.
4.  Cire haɗin bawul ɗin rajistan daga malamai (duba mataki na 6 a sashe na 2.0.5 a shafi na baya) kuma a kwashe layin sinadarai zuwa cikin kwantenansu.
   

NOTE: Idan za ku cire duk wani bawul ɗin solenoid, yi amfani da 3/8" Allen wrench a cikin mashigin ruwa don cire shi.
daga sama da yawa. Wannan zai ba ku damar ɗaga manyan maɓalli na sama daga baya ba tare da tsangwama tare da murfin ba.

Kulawa don Ƙananan Manifold, Malamai ko Solenoid

1. Yi Shiri na 3.01, sannan cire screws na Phillips da ke riƙe da ƙananan yawa a cikin majalisar, kamar yadda aka nuna a ƙasa.
2.  Juya taron manifold zuwa sama kewaye da babban fayil ɗin, don ba da izini don cire haɗin babban babban fayil ɗin. (Idan manifold ɗin yana da wahalar juyawa sama, ɗan sassauta babban babban fayil ɗin clamp sukurori
3.  Cire faifan bidiyo da ke riƙe da ƙananan faifai zuwa ga malamai kuma a cire ƙananan maɓalli
4. NOTE: Tare da raka'o'in APAC, tabbatar da ƙwallo da bazara na bawuloli marasa dawowa da kyau suna riƙe da kyau a cikin ɓangarorin ƙasa.
5. Duba da manifold, yana haɗin gwiwa O-rings, da malami O-rings don lalacewa da kuma maye gurbin duk wani lalacewa, kamar yadda ya cancanta.
6.  Cire malami daga babban fayil kuma cire shi kamar yadda aka nuna a dama. Duba malami da O-ring don lalacewa. Gyara ko maye gurbin sassa kamar yadda ake bukata. (Don kula da solenoid, ci gaba zuwa mataki na 6. In ba haka ba, tsallake zuwa mataki na 14 don fara haɗuwa.)
7.  Cire sukurori da ke riƙe da rabi-da'ira biyu clamps cewa amintattu na sama da yawa.
8.  Juya babban babban fayil clamps baya, daga hanya.
9.  Yi amfani da filaye don cire haɗin haɗin lantarki na solenoid a hankali. (HANKALI! A kiyaye rikodin waɗanne nau'ikan wayoyi masu launi waɗanda kuka cire haɗin daga kowane haɗin solenoid, don haka lokacin da kuke buƙatar sake haɗa su a cikin sake gyarawa za ku tabbata 100% wace launi ce ta tafi inda. Wataƙila ɗaukar hotunan wayar salula zai kasance. hanya mai kyau don ci gaba.)
10.  Ɗaga babban nau'i na sama don ba da izini don kwance solenoid. (Lura an cire kayan maye mashiga ruwa.)
11. Cire solenoid daga babban manifold kuma cire shi. Duba Solenoid da O-ring. Gyara ko musanya kamar yadda ake buƙata.(Lura: Ana amfani da malami 6 a cikin wannan misaliample. Wasu mukamai na iya buƙatar malamai da yawa da cire solenoid.
12.  Dura a kan sabon maye gurbin ko data kasance solenoid. Matsa sosai don hana yadudduka da kuma karkatar da hanyar zuwa ƙasa.
13. Rage babban babban fayil ɗin baya zuwa matsayi, amintattu tare da rabin da'irar clamps (wanda za'a iya turawa gaba daga bayan majalisar ministocin idan suna da wuyar gane su daga gaba) kuma su sake haɗa haɗin lantarki na solenoid.
14. Kuskure a kan sabon maye gurbin ko mai koyarwa. Maƙarƙashiya isa don hana yadudduka da karkatar da abin sha a waje.
15. 15) Sake maƙala ƙananan maɓalli, tura shi a kan malamai, kuma amintacce ga malamai ta hanyar yin amfani da faifan bidiyo. )
16. Aminta ɓangarorin ƙasa zuwa murfin baya tare da skru da kuka cire a baya.
17. (Lura: Idan kun sassauta skru na sama, kuma ba ku ɗaure su ba tukuna, ƙara ƙara su yanzu.)

 Koma Mai Rarraba zuwa Sabis

1. Komawa Mai Rarraba zuwa Sabis: (Ba a nuna)
   1. Sake haɗawa da amintar da ruwa da sinadarai masu duba bawuloli zuwa mai rarrabawa. (Dubi Mataki na 6 a Sashe na 2.0.5.)
   2.  Idan kun cire shi don kulawa da solenoid, sake haɗa tushen mashin ruwa mai shiga ruwa tare da 3/8" Allen wrench.
   3. . Sake haɗa mashigar ruwa da bututun fitarwa kuma kunna wadatar ruwa mai shigowa. Bincika yatsan yatsa.
   4. Sake haɗa igiyar wutar lantarki zuwa wadatar da ta dace tana samar da 110V zuwa 240V AC a 50-60 Hz har zuwa 0.8 Amps.
   5.  Bi hanya a cikin Total Eclipse menu mai kula da Eclipse don ƙaddamar da layukan ɗaukar sinadarai. Bincika don samun ɗigogi kuma.

 matsala

Matsala	Dalili	Magani
1. Matattu Total Eclipse nuni mai kula da kusufin	a. Babu iko daga tushe.	• Bincika wuta a tushe. Duba haɗin kebul na J1 a mai sarrafawa. Don raka'o'in NA kawai: • Tabbatar da wutar lantarki ta bango tana isar da 24 VDC.
	b. PI PCB mara lahani, kebul na J1 ko mai sarrafawa.	• Bincika aiki na kowane sashi, maye gurbin idan an buƙata.
2. Babu kwararar ruwa daga maɓuɓɓugar mai rarrabawa akan karɓar sigina ko fari (ga duk samfuran)	a. An kashe tushen ruwa.	• Maido da ruwa.
	b. allon shigar ruwa/filer ya toshe.	• Tsaftace ko maye gurbin allon shigar ruwa/tace.
	c. PI PCB mara lahani, kebul na J1 ko mai sarrafawa.	• Bincika aiki na kowane sashi, maye gurbin idan an buƙata.
3. Babu kwararar ruwa daga maɓuɓɓugar mai rarrabawa akan karɓar sigina ko fari (ga wasu amma ba duka samfuran ba)	a. Sake-saken haɗin solenoid ko gazawar solenoid.	Duba haɗin haɗin solenoid da voltagda solenoid.
	b. Lalacewar USB J1.	• Bincika aikin kebul na J1 kuma maye gurbin kamar yadda ake bukata.
	c. Rufe malami	• Bincika malami kuma tsaftace ko maye gurbin kamar yadda ake bukata,
4. Babu kwararar ruwa daga maɓuɓɓugar mai rarrabawa akan karɓar sigina (amma samfuran farko OK)	a. Samfura(s) ba a daidaita su ba	• Sanya samfuran tare da mai sarrafa TE kamar yadda ake buƙata.
	b. Babu siginar wanki, ko siginar waya ta sako-sako.	Tabbatar da shirin wanki da duba haɗin wayar sigina.
	c. Cable J2 ta lalace.	• Bincika aikin kebul na J2 kuma maye gurbin kamar yadda ake bukata.
	d. Lalacewar Inji Interface (MI), kebul na J2, ko mai sarrafawa.	• Bincika aiki na kowane sashi, maye gurbin idan an buƙata.
5. Rashin kirga kaya	a. "Count Pump" baya gudana.	• Tabbatar cewa an zaɓi "Kirga Pump" da kyau, yana da adadin famfo kuma yana samun sigina don aiki.
6. Rashin isasshen ko rashin cika zane na sinadarai.	a. Rashin isasshen ruwa.	• Duba bututun shigar ruwa don kinks ko toshewa, gyara ko musanya kamar yadda ake buƙata. Duba allon shigar ruwa don toshewa, tsaftacewa ko maye gurbin kamar yadda ake buƙata. • Idan mafita a sama ba su gyara batun ba, ɗauki matakan haɓaka matsa lamba na ruwa sama da 25 PSI.
	b. Rufe bawul ɗin sinadarai.	• Sauya taron bawul ɗin rajistan da aka toshe.
	c. Rufe malami.	• Ware sashin daga ruwan sha, gano malamin da ke cikin matsala, sannan a maye gurbin malami.
	d. Shigar da bututun karba ba daidai ba.	• Bincika bututun ɗauka don kinks ko madaukai. Tabbatar cewa an shigar da bututun ƙasa da matakin ruwa a cikin akwati.
7. Ci gaba da gudana na ruwa yayin da mai rarrabawa ba ya aiki.	a. tarkace a cikin bawul ɗin solenoid.	• Tabbatar cewa an haɗe magudanar mashigar kuma maye gurbin solenoid da ya shafa.
	b. Lalacewar PI PCB ko J1 Cable.	• Bincika aiki na kowane sashi, maye gurbin idan an buƙata.
8. Asarar sinadari mai mahimmanci ko ruwa mai shiga cikin kwandon sinadarai.	a. Bawul ɗin duba bawul ɗin da bai yi nasara ba da/ko gazawar bawul ɗin duba laima.	• Maye gurbin bawul(s) da suka kasa kuma duba dacewar sinadarai.
	b. Ruwan iska a cikin tsarin.	Nemo da gyara duk wani zubewar iska a cikin tsarin.
9. Ruwa ko sinadarai	a. Harin sinadari ko lalacewa ga hatimi.	• Ware naúrar daga magudanar ruwa, gano ainihin tushen ruwan da kuma maye gurbin duk wani hatimi da abubuwan da suka lalace.
10. Rashin cikar isar da sinadari zuwa mai wanki.	a. Rashin isasshen lokacin ruwa.	• Ƙara lokacin ɗigon ruwa (dokar yatsan yatsa shine 1 seconds kowace ƙafa).
	b. Bututun isarwa ko lalacewa.	• Cire duk wani kinks da/ko maye gurbin bututun isarwa kamar yadda ake buƙata.

W ARNING! Abubuwan da aka nuna akan shafuka masu zuwa yakamata a maye gurbinsu da ƙwararren injiniya kawai.
Duk wani abu da ba a jera a cikin wannan sashe bai kamata a yi ƙoƙarin maye gurbinsa ba tare da shawarar Hydro Systems. (Duk wani ƙoƙari mara izini na gyara sashin zai bata garanti.)
Kafin kowane kulawa, cire haɗin tushen wutar lantarki mai shigowa!

 Jadawalin Abubuwan Fashewa ( majalisar ministoci)

 Lambobin Sashen Sabis ( majalisar ministoci)

Magana	Sashe #	Bayani
1	HYD10097831	Murfin tashar tashar USB
2	HYD10098139	Kit ɗin Bakin bangon bango (Ya ƙunshi shirye-shiryen bangon bango 2)
3	HYD10094361	Bangon bango
4	HYD10098136	Babban Kit ɗin Clip Manifold (Ya ƙunshi shirye-shiryen bidiyo da yawa 2, skru 2 da wanki 2) Samfuran guda 4 da 6 suna amfani da kit 1, yayin da samfurin 8 yana amfani da kits 2.
5	HYD10099753	Kit, EvoClean Lock Mk2 (1)
Ba a Nuna ba	HYD10098944	Kunshin Lakabin Murfin Gaba
Ba a Nuna ba	HYD10099761	Kit ɗin Samar da Wuta na 24VDC

 

Zane-zanen Fashewa (masu yawa)

Lambobin Sashe na Sabis (yawanci)

Magana	Sashe #	Bayani                                                                                                            akwai akan buƙata)
1	HYD238100	Mai wanki
2	HYD10098177	3/4 "Majalisar Shigar Ruwan Ruwan Lambu (ya haɗa da mai wanki)
	HYD90098379	3/4 "British Standard Bututu (BSP) Majalisar Mashigar Ruwa (ya haɗa da mai wanki)
	HYD10098184	EPDM O-ring, Girman #16 (fakitin 10) - Ba a nuna ba, ana amfani da shi akan Ref. 2, 3, 4, 5 da 15
3	HYD10095315	Solenoid Water Valve, 24V DC
	HYD10098193	EPDM Washer, 1/8 a x 1 a cikin (fakiti 10) - Ba a nuna ba, ana amfani da shi akan Ref. 3
4	HYD10098191	Valve Nipple Assembly (ya haɗa da zoben O-Zobba 2)
5	HYD10075926	Ƙarshen Ƙarshen Babban Manifold
6	HYD10098196	Ma'aikacin Ƙarƙashin Ƙarfafa - 1/2 GPM
	HYD10098195	Babban Malamin Yadawa - 1 GPM
	HYD10098128	Aflas O-ring, Girman #14 (fakitin 10) - Ba a nuna ba, ana amfani da shi akan Ref. 6, 11 da 12
7	HYD90099387	1/2 "Hose Barb (misali)
	HYD90099388	3/8 "Hose Barb (na zaɓi)
8	HYD10098185	EvoClean Clip - Kynar (Fakiti 10), wanda aka yi amfani da shi akan Ref. 6, 11 da 12
9	HYD90099384	Manifold mai tashar jiragen ruwa guda ɗaya
	HYD10099081	Aflas O-ring, Girman ID na 14mm x 2mm (fakitin 10) - Ba a nuna ba, ana amfani da shi akan Ref. 9, 10 da 14
10	HYD90099385	Manifold na tashar jiragen ruwa biyu
11	HYD10098186	Ƙwararren Ƙwararren Ƙwararrun Ƙwararrun Ƙwararru da Ƙungiyar Hannu, 1/4" Barb (PVC, Aflas, Teflon, Hastelloy tare da Kynar Elbow)
	HYD10098187	Ƙwararren Ƙwararren Ƙwararrun Ƙwararrun Ƙwararru da Ƙungiyar Hannu, 3/8" Barb (PVC, Aflas, Teflon, Hastelloy tare da Kynar Elbow)
	HYD10098197	Ƙwararren Ƙwararren Ƙwararrun Ƙwararrun Ƙwararru da Ƙungiyar Hannu, 1/2" Barb (PVC, Aflas, Teflon, Hastelloy tare da Kynar Elbow)
12	HYD10098188	Ruwan Duba Bawul da Majalisar Hannu, 1/8" Barb (BA don haɗin sinadarai ba!)
13	HYD90099390	Ƙarshen Ƙarshen Manifold
14	HYD10097801	Malamin Flush - 1 GPM
15	HYD10075904	Bututun nono
16	HYD10099557	Kayan Wutar Lantarki na Layi (Inline Check Kit)6-fakitin: 4 Blue Viton / 2 Grey EPDM) don Tube Ciwon Kemikal, 1/4”-3/8”-1/2” barbs
	HYD10099558	Kayan Wutar Lantarki na Layi (Inline Check Kit)8-fakitin: 6 Blue Viton / 2 Grey EPDM) don Tube Ciwon Kemikal, 1/4”-3/8”-1/2” barbs
	HYD10099559	Kayan Wutar Lantarki na Layi (Inline Check Kit)10-fakitin: 8 Blue Viton / 2 Grey EPDM) don Tube Ciwon Kemikal, 1/4”-3/8”-1/2” barbs

 

Lambobin Sashe na Sabis (yawanci)

Magana	Sashe #	Bayani
Ba a Nuna ba	HYD90099610	Kit ɗin Footvalve, Viton, tare da Allon, Blue, 4 bawuloli, 1/4 "-3/8" -1/2" barbs
Ba a Nuna ba	HYD90099611	Kit ɗin Footvalve, Viton, tare da Allon, Blue, 6 bawuloli, 1/4 "-3/8" -1/2" barbs
Ba a Nuna ba	HYD90099612	Kit ɗin Footvalve, Viton, tare da Allon, Blue, 8 bawuloli, 1/4 "-3/8" -1/2" barbs
Ba a Nuna ba	HYD90099613	Footvalve Kit, EPDM, tare da Allon, Grey, 4 bawuloli, 1/4"-3/8"-1/2" barbs
Ba a Nuna ba	HYD90099614	Footvalve Kit, EPDM, tare da Allon, Grey, 6 bawuloli, 1/4"-3/8"-1/2" barbs
Ba a Nuna ba	HYD90099615	Footvalve Kit, EPDM, tare da Allon, Grey, 8 bawuloli, 1/4"-3/8"-1/2" barbs
Ba a Nuna ba	HYD10098189	Kit ɗin Tub ɗin Cinikin Kemikal, tsayin ƙafa 7 na 3/8 ” bututun PVC da aka yi wa ƙwanƙwasa da 2 clamps
Ba a Nuna ba	HYD10098190	Kit ɗin Tub ɗin Cinikin Kemikal, tsayin ƙafa 7 na 1/4 ” bututun PVC da aka yi wa ƙwanƙwasa da 2 clamps
Ba a Nuna ba	HYD90099599	Kit ɗin Zaɓuɓɓuka, Valve mara dawowa (NRV) - Samfura 4 (Misali a yankin APAC kawai)
Ba a Nuna ba	HYD90099600	Kit ɗin Zaɓuɓɓuka, Valve mara dawowa (NRV) - Samfura 6 (Misali a yankin APAC kawai)
Ba a Nuna ba	HYD90099597	Kit ɗin Zaɓuɓɓuka, Valve mara dawowa (NRV) - Samfura 8 (Misali a yankin APAC kawai)

garanti

 Garanti mai iyaka
Garanti mai siyarwa kawai ga mai siye samfuran za su kasance masu yanci daga lahani a cikin kayan aiki da aiki ƙarƙashin amfani da sabis na yau da kullun na tsawon shekara guda daga ranar da aka gama kera. Wannan garanti mai iyaka baya aiki ga (a) hoses; (b) da samfuran da ke da rayuwa ta al'ada ƙasa da shekara ɗaya; ko (c) gazawa a cikin aiki ko lalacewa ta hanyar sinadarai, kayan lalata, lalata, walƙiya, ƙarancin da bai dace batage wadata, cin zarafi na jiki, mummuna ko rashin amfani. A yayin da mai siye ya canza ko gyara samfuran ba tare da rubutaccen izinin mai siyarwa ba, duk garanti za su ɓace. Babu wani garanti, na baka, bayyane ko fayyace, gami da kowane garantin ciniki ko dacewa ga kowace manufa, da aka yi don waɗannan samfuran, kuma duk sauran garanti an keɓe su.
Wajibin mai siyarwa kawai a ƙarƙashin wannan garanti zai kasance, a zaɓin mai siyarwa, don gyara ko maye gurbin kayan aikin FOB mai siyarwa a Cincinnati, Ohio duk wani samfuran da aka samu ban da garanti.

 Iyakance Alhaki
Wajabcin garantin mai siyarwa da magungunan mai siye sune kawai kuma na keɓance kamar yadda aka bayyana anan. Mai siyarwa ba zai sami wani abin alhaki ba, kai tsaye ko kaikaice, kowane iri, gami da alhaki na musamman, na faruwa, ko lahani ko ga duk wani da'awar lalacewa ko asarar da ta haifar da kowane dalili ko wanene, ko bisa ga sakaci, tsananin alhaki, keta haddi. kwangila ko keta garanti.

Takardu / Albarkatu

HYDRO Systems EvoClean tare da Jimillar Mai Kula da Eclipse [pdf] Manual mai amfani EvoClean tare da Jimlar Mai Kula da Eclipse, EvoClean, Jimlar Mai Kula da Eclipse, HYD10098182

Magana

• Manual mai amfani