SIEMENS FDCIO422 Module Fitar da Abubuwan da za a iya Magancewa

GABATARWA

Ana amfani da FDCIO422 don haɗin har zuwa 2 masu zaman kansu Class A ko 4 masu zaman kansu na Class B bushe N/O masu daidaita lambobin sadarwa. Ana iya kula da layukan shigarwa don buɗaɗɗen, gajere da yanayin kuskuren ƙasa (dangane da resistor ƙarewar EOL da daidaita aji).
Ana iya saita abubuwan shigar da kanta ta hanyar kwamitin kula da wuta don ƙararrawa, matsala, matsayi ko yankunan kulawa.
FDCIO422 tana da abubuwan da za a iya aiwatarwa guda 4 tare da nau'in nau'in latching mara izini 4 masu yuwuwar Lambobin sadarwa don shigarwar sarrafa wuta.
Alamar matsayi a kowane LED don kowane shigarwa da fitarwa da 1 LED don gaba ɗaya matsayin na'urar. Samar da wutar lantarki ta hanyar FDnet (iyakantaccen wutar lantarki).

• Ciki har da na'urorin EOL 4 (470 Ω)
• 3 separators don raba wutar lantarki iyakance wayoyi daga marasa ƙarfi iyaka. Ana isar da masu rarraba a cikin girma dabam 3 don daidaitaccen akwatin 4 11/16-inch, 4 11/16-inch tsawo zobe da akwatin 5-inch (RANDL).

FDCIO422 yana goyan bayan yanayin aiki guda biyu: yanayin rashin jin daɗin polarity da yanayin keɓewa. Za a iya yin waya da tsarin don kowane yanayi (duba Hoto 8). A yayin yanayin keɓewa, ginanniyar keɓancewar dual ɗin za ta yi aiki a ɓangarorin biyu na ƙirar don ware gajeriyar layin a gaba ko bayan ƙirar.

HANKALI
Wutar lantarki!
Babban ƙarartages na iya kasancewa a kan tashoshi. Yi amfani da farantin fuska ko da yaushe da mai raba (s).

Hoto 1 FDCIO422 keji da mai ɗaukar kaya

HANKALI
Ba a yi nufin wannan na'urar don aikace-aikace a cikin mahalli masu fashewa ba.

Class A/X (UL) yayi daidai da DCLA (ULC) Class B yayi daidai da DCLB (ULC)

Don cikakken tsari da ƙaddamarwa na FDCIO422 kuma koma zuwa takaddun mai amfani na kwamitin ku, da kayan aikin software da aka yi amfani da su don daidaitawa.

SANARWA
Don hana yiwuwar lalacewa ga DPU (koma zuwa P/N 315-033260) ko zuwa 8720 (koma zuwa P/N 315-033260FA) KAR KA haɗa FDCIO422 zuwa DPU ko 8720 har sai an cire keji daga mai ɗaukar kaya (Hoto na 2).

Koma Hoto na 3 don nemo wurin buɗewa akan murfin keji wanda ke ba da damar shiga ramukan shirye-shirye waɗanda ke kan allon da'ira da aka buga FDCIO422.
Don haɗa FDCIO422 zuwa DPU ko 8720 Programmer/Tester, saka filogi daga kebul na DPU/8720 da aka bayar tare da Mai tsarawa/Mai gwadawa a cikin buɗewa a gaban FDCIO422. Tabbatar shigar da shafin ganowa akan filogi a cikin ramin don wurin ganowa kamar yadda aka nuna a Hoto 3. Matsakaicin sake fasalin firmware na DPU dole ne ya zama 9.00.0004, don 8720 dole ne ya zama 5.02.0002.

WIRING

Koma zuwa Hoto 11. Koma zuwa madaidaicin zane na wayoyi kuma a yi waya da tsarin shigarwa/fitarwa wanda za'a iya magancewa daidai.

Girman waya da aka ba da shawarar: 18 mafi ƙarancin AWG da 14 AWG mafi girman Waya fiye da 14 AWG na iya lalata mai haɗawa.

(Duba Figures 2 da 3). Bi umarnin a cikin littafin DPU ko littafin 8720 don tsara FDCIO422 zuwa adireshin da ake so. Yi rikodin adireshin na'urar akan lakabin da ke gaban tsarin. Ana iya shigar da FDCIO422 kuma a haɗa shi zuwa tsarin.

BAYANIN SHIGA

1. Za a iya samun kowane adadin buɗaɗɗen buɗaɗɗen maɓallan lamba.
2. Ƙarshen na'urar layi dole ne a kasance a wurin canji na ƙarshe.
3. Kada a yi waya da rufaffiyar maɓalli a kan ƙarshen na'urar layi a cikin buɗaɗɗen wayoyi.
4. Maɓallai da yawa: don buɗe ido na wayoyi kawai.

Wutar lantarki mai iyaka

Dangane da NEC Mataki na ashirin da 760, dole ne a raba duk masu siginar siginar kariyar wuta da ke iyakance aƙalla ¼ inch daga duk abubuwan da ke cikin akwatin fitarwa:

• Hasken lantarki
• Ƙarfi
• Class 1 ko mara ƙarfi iyaka masu siginar kariyar wuta
  Don biyan buƙatun da ke sama, dole ne a kiyaye waɗannan jagororin yayin shigar da wannan tsarin shigarwa/fitarwa.
  Idan ba a yi amfani da wayoyi masu iyaka ba a cikin wannan akwati, to waɗannan jagororin ba za su yi aiki ba. A wannan yanayin, tabbatar da bin daidaitattun ayyukan wayoyi.

Masu rarrabewa

Dole ne a yi amfani da masu rarraba lokacin da aka haɗa lambobin sadarwa zuwa layukan da ba su da ƙarfi. Dutsen madaidaicin mai raba a cikin akwatin da aka yi amfani da shi (akwatin 4 11/16-inch da akwatin 5-inch). Idan an yi amfani da zoben tsawo tare da akwatin murabba'in 4 11/16-inch dole ne a saka ƙarin mai raba a cikin zoben tsawo.
Masu rarraba suna ƙirƙirar ɗakuna biyu don raba wayoyi kamar yadda aka nuna a hoto na 5.

Waya mai shigar da akwatin fitarwa

Duk wayoyi masu iyaka na wuta dole ne su shigar da akwatin fitarwa daban da hasken lantarki, wuta, aji 1, ko masu siginar kariyar wuta mara ƙarfi. Don FDCIO422, wayoyi zuwa toshe tasha don layi da bayanai dole ne su shigar da akwatin fitarwa daban daga tashoshi don fitarwa.
Don tashoshin fitarwa, kariya tare da fuse
(dangane da aikace-aikacen) ana bada shawarar. Koma zuwa Figures 6 da 8.

WIRING A TSARON TSARO
Rage tsayin waya da ke shiga akwatin fitarwa.

HAUWA

Tsarin shigarwa/fitarwa FDCIO422 na iya hawa kai tsaye cikin akwatin murabba'in 4 11/16-inch ko akwatin murabba'in 5-inch.
Za a iya saka ƙarin zobe na tsawo akan akwatin murabba'in 4 11/16-inch tare da sukurori biyu.
Don hawan tsarin shigarwa/fitarwa a cikin akwatin murabba'in 5-inch yi amfani da farantin adaftan 4 11/16-inch.
A ɗaure module ɗin zuwa akwatin murabba'i tare da
4 sukurori bayar da akwatin.
A ɗaure farantin fuska a kan mai ɗaukar hoto ta amfani da sukurori 2 da aka bayar tare da FDCIO422.

Tabbatar kun tsara FDCIO422 kafin a ɗaure farantin fuskar zuwa naúrar.

Izinin girma FDCIO422

FDCIO422 Volume 11.7 inch3, max. 20 madugu
Duba NFPA70, Lambar Wutar Lantarki ta Ƙasa '314.16 Yawan Masu Gudanarwa a cikin Wuta, Na'ura da Akwatunan Junction, da Conduit', Tebur 314.16 (A) da (B), don zaɓar akwatin ƙarfe daidai (4 11/16-inch square box, 4) Akwatin murabba'in 11/16-inch tare da zoben tsawo ko akwatin murabba'in 5-inch).

GARGADI
Ba a yarda a yi amfani da tsarin ba tare da farantin fuska ba. Cire farantin fuska don sabis da dalilai na kulawa kawai!

DATA FASAHA

Ƙa'idar aikitage:	DC 12-32V
Aiki na halin yanzu (quiescent):	1 mA
Madaidaicin madaidaicin kololuwar halin yanzu:	1.92 mA
Matsakaicin yanayin haɗin halin yanzu 2):	4
Fitowar relays 1): (yawanci buɗewa / yawanci rufewa)	DC 30V / AC 125V Max. 4x5a ku 2x7 A (OUT B, C) ko 1 x 8 A (FITA C)
Yanayin aiki:	32 - 120 ° F / 0 - 49 ° C
Yanayin ajiya:	-22 - +140 °F / -30 - +60 °C
Danshi:	5-85 % RH (ba daskarewa ba kuma a cikin ƙananan zafin jiki)

Ka'idar sadarwa:	FDnet (da'irar layin siginar sa ido, Ƙarfin Ƙarfi)
Launi:	Mai ɗaukar kaya: ~ RAL 9017 Murfin keji: m Cage: ~ RAL 9017 Faceplate: fari
Matsayi:	UL 864, ULC-S 527, FM 3010, Farashin UL2572
Amincewa:	UL / ULC / FM
Girma:	4.1 x 4.7 x 1.2 inci
Girma ( keji da mai ɗauka):	11.7 inci3

1) 2 nau'in latching coil, busassun lamba, Form A

2) Matsakaicin cajin na'urar. 1 Load Unit (LU) yayi daidai da 250 µA

SANARWA
Tabbatar cewa kwamitin yana goyan bayan yanayin Isolator don nau'in samfurin FDCIO422 30. Dole ne a yi amfani da yanayin keɓancewa tare da FDCIO422, sigar samfur <30. Za ku sami lambar sigar samfur akan alamar.

BAYANIN WIRING

1. Duk maɓallan da ake kulawa dole ne a riƙe su a rufe da/ko buɗewa na akalla 0.25 s don tabbatar da ganowa (dangane da lokacin tacewa).
2. Ƙarshen na'urar layi: 470 Ω ± 1 %, ½ W resistor, wanda aka kawo tare da na'urar (4x).
3. Dole ne a yi amfani da abubuwan shigar da bayanai marasa yuwuwa.
4. Lokacin da aka haɗa FDCIO422 a cikin yanayin rashin hankali, Layi -6 da -5 na iya zama ko dai layin madauki.
5. Lokacin da aka haɗa FDCIO422 don yanayin keɓewa, ingantaccen layin yana buƙatar haɗa shi zuwa 1b kuma layin mara kyau zuwa 6. Na'urar ta gaba tana buƙatar haɗawa da 1b da 5.
   Layin Isolator yana tsakanin mai haɗa 6 da 5.
6.  Ƙimar lantarki:
   

   FDnet voltage iyakar:	DC 32 V
   Madaidaicin madaidaicin kololuwar halin yanzu:	1.92 mA

    

7. Ƙididdiga masu sauyawa masu kulawa:
   

   Saka idanu voltage:	3 V
   Shigar da tsayin kebul:	Max. 200 ft
   An ba da shawarar garkuwar shigarwa don tsayin kebul daga:	30 ƙafa - 200 ft
   Max. Cline zuwa layi:	0.02µF
   Max. Cline don garkuwa:	0.04µF
   Max. girman layin:	14 AWG
   Min. girman layi:	18 AWG

    

8. Nauyin aiki dole ne ya taɓa wuce ƙimar halin yanzu.
9. Kamar yadda samfurin ba a kula da abubuwan da ake fitarwa ba yi amfani da sa ido na waje don aikace-aikace masu mahimmanci.
10. Zaɓi madaidaicin girman AWG don aikin halin yanzu da ake nufi.
11. Haɗa garkuwa masu shigowa da masu fita tare ta hanyar karɓuwa. Rike garkuwa, kar a yi wani haɗi zuwa na'urar ko akwatin baya.
12. Yi amfani da waya mai kariya da/ko murɗaɗɗen waya don haɗa na'urar sauya sheka kuma ajiye wayoyi gajeru gwargwadon yiwuwa.
13. Ɗaure garkuwar wayoyi zuwa ƙasan ƙasa (a ƙarshen ɗaya kawai, koma zuwa Hoto 9). Don maɓalli da yawa akan shigarwa iri ɗaya, haɗa garkuwa masu shigowa da masu fita tare ta hanyar karɓuwa. Rike garkuwa, kar a yi wani haɗi zuwa na'urar ko akwatin baya.
14. An gano kuskuren ƙasa mai kyau da mara kyau a <25 kΩ don shigarwar 1 - 4.
    • Dole ne a haɗa garkuwa daga shigarwar zuwa wani sanannen ƙasa mai kyau don aiki mai kyau.
      Muna ba da shawarar yin amfani da mahaɗin ƙasa a cikin akwatin lantarki.
    • Filayen igiyoyi masu sulke na sulke ko madaidaitan ƙarfe sun wadatar azaman garkuwa.
    • Idan madaidaicin haɗin garkuwa zuwa sanannen ƙasa mai kyau ba za a iya tabbatar da shi ba to sai a yi amfani da igiya mara garkuwa.

      
15. Relay lamba ratings

    Fitowar tsayin kebul: Max. 200 ft

Yawanci buɗewa / Kullum rufewa:
Ƙayyade max. yanayin zafi (77°F, 100°F, 120°F) da max. ikon factor daga kaya. Sannan nemo max mai yuwuwa mai alaƙa. ratings na yanzu a cikin tebur da ke ƙasa:

	har zuwa DC 30 V					har zuwa AC 125 V
PF / Amb. Temp.	0 - 77 ° F / 0 - 25 ° C	≤ 100°F / ≤ 38°C	≤ 120°F / ≤ 49°C			0 - 77 ° F / 0 - 25 ° C	≤ 100°F / ≤ 38°C	≤ 120°F / ≤ 49°C
tsayayya           1	4 x5 a 2 x7 a 1 x8 a	4 x3 a 2 x4 a 1 x5 a	4 x2 a 2 x2.5 a 1 x3 a			4 x5 a 2 x7 a 1 x8 a	4 x3 a 2 x4 a 1 x5 a	4 x2 a 2 x2.5 a 1 x3 a
m          0.6	4 x5 a 2 x5 a 1 x5 a	4 x3 a 2 x4 a 1 x5 a	4 x2 a 2 x2.5 a 1 x3 a			4 x5 a 2 x7 a 1 x7 a	4 x3 a 2 x4 a 1 x5 a	4 x2 a 2 x2.5 a 1 x3 a
m         DC 0.35 Farashin AC0.4	4 x3 a 2 x3 a 1 x3 a	4 x3 a 2 x3 a 1 x3 a	4 x2 a 2 x2.5 a 1 x3 a			4 x5 a 2 x7 a 1 x7 a	4 x3 a 2 x4 a 1 x5 a	4 x2 a 2 x2.5 a 1 x3 a
4x Fita: A,B,C,D; 2x Fita: B,C; 1x waje: C; yi amfani da abubuwan da aka nuna kawai PF 0.6 (60 Hz) ≡ L/R max. 3.5m ku PF 0.35 (60 Hz) ≡ L/R max. 7.1 ms ≡ max. ind. Load a kowane hali     Bincike				SANARWA
				Ba dole ba ne a yi amfani da ƙimar AC tare da kayayyaki masu sigar samfur <10. Za ku sami lambar sigar samfur akan alamar. Saukewa: FDCIO422 S54322-F4-A1 10
Nuni					Ayyuka
A al'ada, babu laifi In-/Fitarwa module yana da cikakken aiki					babu
Laifi yana nan Kuskure tare da shigarwar kewayawa (layi mai buɗewa, gajeriyar kewayawa, karkata)					Duba tsarin shigarwa (saitin sigina, resistors, short-circuit, buɗaɗɗen layi)
Saitunan ma'auni mara inganci					Duba saitin siga
Kuskuren samarwa					– Duba layin ganowa voltage – Sauya na'urar
Kuskuren software (Kuskuren Watchdog)					Sauya na'urar
Kuskuren ajiya					Sauya na'urar
Kuskuren sadarwa tsakanin na'ura da kwamitin kulawa					Magani sanadin
Lura: Duk wani saƙo na gaba ɗaya ana iya nunawa tare da wani matsayi.

Yana daidaita abubuwan da aka fitar

Don daidaita abubuwan da aka fitar, ci gaba kamar haka:

• Ƙayyade a wane matsayi lambar sadarwa ke aiki. Lambobin sadarwa na iya aiki yayin da:
  • Rufe (bude a kullum, NO)
  • Buɗe (yawanci rufe, NC)
• Bayan kunna lambar sadarwa ta kasance:
  • Mai aiki na dindindin
  • Aiki kawai na wani ɗan lokaci. Yaya tsawon lokacin da lambar ke aiki kuma za'a iya daidaita shi (tsawon bugun bugun jini). Wannan kawai za a yi amfani dashi a cikin aikace-aikacen:
  • Sake saita na'urar waya guda huɗu F5000 Reflective Beam Smoke Detector, P/N 500-050261.
    Saituna masu zuwa suna yiwuwa:

    10 s ku

    15 s ku

    20 s ku

     
• Ƙayyade halayen fitarwa idan akwai kuskure akan layin sadarwa (buɗewar layi zuwa kwamiti mai kulawa, FDCIO422 gazawar wutar lantarki). Abubuwan daidaitawa masu zuwa suna yiwuwa ga halayen idan an gaza (tsaffin matsayi):
  • Matsayin fitarwa ya kasance iri ɗaya kamar kafin kuskure
  • Ana kunna fitarwa
  • An kashe fitarwa

Yana daidaita abubuwan shigarwa

Don saita abubuwan shigar, ci gaba kamar haka:

• Sanya abubuwan da aka shigar a matsayin 4 Class B (DCLB) ko 2 Class A (DCLA).
• Ƙayyade nau'in shigarwa (shigarwar haɗari ko shigarwa):
  • Shigar da matsayi: yana jawo canjin hali
  • Shigar da haɗari: yana haifar da ƙararrawa
• Ƙayyade nau'in sa ido da masu tsayayyar sa ido (duba Hoto 10):
  • Class A kawai yana buɗe babu EOL
  • Class B kawai yana buɗe RP 470 Ω
  • Class B bude da gajere RS 100 Ω da RP 470 Ω
  • Ƙayyade lokacin shigarwar tacewa. Saituna masu zuwa suna yiwuwa:
    

    0.25 s ku

    0.5 s ku

    1 s ku

    Tsarin shigarwar dole ne ya dace da ainihin wayoyi.
    Dole ne EOL ya ƙare duk abubuwan da ba a yi amfani da su ba.

    Bi umarnin a cikin littafin jagorar madaidaici don tsara FDCIO422 yadda ya kamata: P/N A6V10333724 da P/N A6V10336897.
• An gano abubuwan shigarwa na 2x Class A ta panel azaman Input 1 da Input 2.
• Ba za a iya daidaita Class A da Class B a lokaci guda ba. 2x Class A ko 4x Class B.

  

• Hoto 10 FDCIO422 shigar da wayoyi Class A da Class B
  (Don cikakkun bayanai na layi na 1 da na 2 duba Hoto na 8, don cikakkun bayanai na shigar da wayoyi duba Hoto na 11.)
  A cikin layin na'urar, har zuwa 30 na kowane na'urori na'urori na'urorin cikin yanayin masarufi tare da 20 ohms maxine juriya a tsakanin wasu abubuwa biyu a cikin yanayin wirlator a cikin aji.
  A cikin layin na'urar, har zuwa 30 na kowane na'urori masu jituwa a cikin yanayin rashin jin daɗin polarity tare da juriya na 20 ohms max za a iya ware su a bayan ƙirar ɗaya a cikin yanayin keɓewa a cikin wayoyi na Class B Style 4.
  HLIM isolator module da SBGA-34 sounder tushe ba za a iya amfani da su a cikin madauki ɗaya tare da kayayyaki a yanayin keɓewa.

Ƙarshen Layin Resistor Wiring Overview

1. HANKALI: DON SAMUN SIFFOFIN TSARO - GA TASKAR DA AKA GANO DA A ① KAR KUYI AMFANI DA TSARMIN WIRE. GUDUWAR WAYAR WUTA DOMIN BA DA SAMUN SAMUN CIN HANNU.
2. Yi amfani da tashar Siemens TB-EOL P/N S54322-F4-A2 ko makamancin haka.
3. Yi amfani da buɗaɗɗen buɗaɗɗen lamba SWITCHES kawai don abubuwan shigarwa
   Hoto 11 Ƙarshen layi da sauyawa

• Yi amfani da 4 ko 2 sandar sandar UL/ULC da aka sani.
• Canja wurin Terminal dole ne ya kasance mai ikon madugu biyu a tasha ɗaya.
• EOL Resistor wiring dole ne a yi bisa ga UL 864 da ULC-S527, babi 'EOL Devices'.
• Dole ne a haɗa EOL Resistors a ƙarshen layin shigarwa.
• Babu na'urar da za a iya magana da ita ko na'urar gano hayaki mai waya 2 da za a iya haɗawa da abubuwan da aka shigar.

KAYAN HAKA

NA'URA	Odar NO.
EOL resistor 100 Ω ± 1% ½ W	Saukewa: S54312-F7-A1	Abubuwan da aka bayar na SIEMENS INDUSTRY INC.
4 11/ 16-inch adaftar farantin (na zaɓi)	M-411000	RANDL INDUSTRIES INC.
Akwatin 5-inch (na zaɓi)	Saukewa: T55017	RANDL INDUSTRIES INC.
Akwatin 5-inch (na zaɓi)	Saukewa: T55018	RANDL INDUSTRIES INC.
Akwatin 5-inch (na zaɓi)	Saukewa: T55019	RANDL INDUSTRIES INC.
Tashar tashar TB-EOL	Saukewa: S54322-F4-A2	Abubuwan da aka bayar na SIEMENS INDUSTRY INC.

Kamfanin Siemens, Inc.
Abubuwan Haɓaka na Musamman
8, Hanyar Fernwood
Gidajan sayarwa A Florham Park, New Jersey 07932 www.siemens.com/buildingtechnologies

Siemens Canada Limited girma
Abubuwan Haɓaka na Musamman
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 Kanada

© Siemens Industry, Inc. 2012-2016
Bayanai da ƙira suna canzawa ba tare da sanarwa ba.

firealarmresources.com

Takardu / Albarkatu

SIEMENS FDCIO422 Module Fitar da Abubuwan da za a iya Magancewa [pdf] Jagoran Jagora FDCIO422, FDCIO422 Abubuwan da za a iya Magancewa, Tsarin Fitar da Fitowa, Module na Fitar da Mahimmanci.

Magana

• Manual mai amfani