MICROCHIP AN4306 Iṣagbesori Ilana fun Ipilẹ Power Module

Ọrọ Iṣaaju

Akọsilẹ ohun elo yii n pese awọn iṣeduro lati gbe deede module agbara ti ko ni ipilẹ si ifọwọ ooru ati PCB. Tẹle awọn ilana iṣagbesori lati ṣe idinwo mejeeji igbona ati awọn aapọn ẹrọ.

Ni wiwo Laarin Baseless Power Module ati Heat rii

Yi apakan apejuwe awọn ni wiwo laarin baseless module agbara ati ooru rii.

Ohun elo Iyipada Alakoso (PCM) Ifipamọ

 

Lati ṣaṣeyọri ọran ti o kere julọ si igbona igbona gbigbona, iyipada ohun elo iyipada alakoso ni oyin le ṣee lo lori module agbara ailopin. Lo ilana titẹ-iboju lati rii daju idasile aṣọ kan ti sisanra ti o kere ju ti 150 μm si 200 μm (5.9 mils si 7.8 mils) lori module agbara ailopin, bi o ṣe han ninu eeya atẹle. Microchip ṣe iṣeduro Loctite PSX-Pe. Iru wiwo igbona yii dinku fifa-jade. fifa-jade jẹ idi lati gigun kẹkẹ gbona ti o waye laarin awọn ipele ibarasun meji.

Aluminiomu Foils pẹlu PCM

Lati ṣaṣeyọri idiwọ igbona ti o kere julọ-si-ooru rii igbona, bankanje aluminiomu pẹlu PCM ni ẹgbẹ mejeeji (Kunze Crayotherm — KU-ALF5) le ṣee lo laarin module agbara ti ko ni ipilẹ ati ifọwọ ooru bi a ṣe han ni nọmba atẹle.

Iṣagbesori Module Ailokun si Heat rii

Iṣagbesori ti o tọ ti module agbara ti ko ni ipilẹ si igbona ooru jẹ pataki lati ṣe iṣeduro gbigbe ooru to dara. Igbẹ ooru ati oju oju olubasọrọ module agbara ipilẹ gbọdọ jẹ alapin ati mimọ (ko si idọti, ko si ipata, ati pe ko si ibajẹ) lati yago fun aapọn ẹrọ nigbati a ba gbe module agbara ti ko ni ipilẹ ati lati yago fun ilosoke ninu resistance igbona.

Akiyesi: Niyanju flatness ni <50 μm fun 100 mm lemọlemọfún ati ki o niyanju roughness ni Rz 10. Gbe awọn baseless module agbara pẹlu PCM tabi awọn aluminiomu bankanje pẹlu PCM loke awọn ooru rii ihò ati ki o waye a kekere titẹ si o.

• Fun BL1 ati BL2 module agbara ailopin:
  • Fi M4 dabaru ati awọn orisun omi ifoso (DIN 137A) ninu awọn iṣagbesori iho. Awọn dabaru ori ati ifoso opin gbọdọ jẹ ni 8 mm aṣoju. Mu dabaru naa titi ti iye iyipo ikẹhin ti de. (Wo iwe data ọja fun iyipo ti o pọju laaye).
• Fun module agbara ailopin BL3:
  • Fi awọn skru M3 sii ati awọn apẹja orisun omi (DIN 137A) ninu awọn ihò iṣagbesori. Ori dabaru ati iwọn ila opin gbọdọ jẹ ni 6 mm aṣoju.

• Awọn skru M3 marun gbọdọ wa ni iyipo si 1/3 ti iyipo ikẹhin. Bere fun: 1 – 2 – 4 – 3 – 5.
• Awọn skru M3 marun gbọdọ wa ni iyipo si 2/3 ti iyipo ikẹhin. Bere fun: 1 – 5 – 3 – 4 – 2.
• Awọn skru M3 marun gbọdọ wa ni iyipo si iyipo ikẹhin. Bere fun: 3 – 5 – 4 – 2 – 1.

Wo iwe data ọja fun iyipo ti o pọju laaye. Lati ṣe iṣẹ yii fun gbogbo awọn modulu agbara ti ko ni ipilẹ, lo screwdriver pẹlu iyipo iṣakoso.

PCB Apejọ lori Ipilẹ Power Module

Awọn atẹle jẹ awọn igbesẹ lati pejọ PCB lori module agbara ailopin.

1. Gbe awọn spacers lori ooru rii sunmo si ipilẹ agbara module. Awọn alafo gbọdọ wa ni giga 10± 0.1 mm.
   • Akiyesi: Awọn ipilẹ module jẹ 9.3 mm ga. Awọn alafo gbọdọ wa ni isunmọ si awọn modulu agbara ti ko ni ipilẹ lati yago fun eyikeyi awọn gbigbọn lakoko ti o bọwọ fun awọn ibeere idabobo, bi a ṣe han ni nọmba atẹle. PCB gbọdọ wa ni agesin si awọn baseless module agbara ati dabaru si awọn spacers. Yiyi iṣagbesori ti 0.6 Nm (5 lbf·in) ni a gbaniyanju.
2. Solder gbogbo awọn pinni itanna ti module agbara si PCB. Ko si ṣiṣan solder mimọ ti o nilo lati so PCB pọ mọ module nitori mimọ module olomi ko gba laaye.

Akiyesi: Maṣe yi awọn igbesẹ meji wọnyi pada, nitori ti gbogbo awọn pinni ti wa ni tita ni akọkọ si PCB, yiyi PCB sori awọn alafo ṣẹda abuku ti PCB, eyiti o yori si aapọn ẹrọ ti o le ba awọn orin jẹ tabi fọ awọn paati lori PCB.

Fun iṣelọpọ daradara, ilana titaja igbi le ṣee lo lati ta awọn ebute naa si PCB. Ohun elo kọọkan, ifọwọ ooru ati PCB le yatọ; soldering igbi gbọdọ wa ni akojopo lori kan irú-nipasẹ-nla igba. Ni eyikeyi idiyele, ipele ti o ni iwọntunwọnsi ti solder gbọdọ yika pinni kọọkan.

Awọn ihò ninu PCB (wo Nọmba 4-1) jẹ pataki lati yọ awọn skru iṣagbesori ti o dapọ module agbara ti ko ni ipilẹ si ifọwọ ooru. Awọn ihò iwọle wọnyi gbọdọ jẹ nla fun ori dabaru ati awọn ifọṣọ lati kọja larọwọto, gbigba fun ifarada deede ni ipo iho PCB.

Aafo laarin isalẹ ti PCB ati awọn ipilẹ agbara module jẹ gidigidi kekere. Microchip ko ṣeduro lilo nipasẹ awọn paati iho loke module. Lati din yi pada lori voltages, SMD decoupling capacitors ti awọn ebute agbara VBUS ati 0/VBUS le ṣee lo. (Wo aworan 4-1). Rii daju aabo lakoko mimu awọn paati wuwo bii electrolytic tabi polypropylene capacitors, awọn oluyipada, tabi awọn inductor ti a gbe ni ayika module agbara. Ti awọn paati wọnyi ba wa ni agbegbe kanna, ṣafikun awọn spacers bii iwuwo ti awọn paati wọnyi lori ọkọ ko ni itọju nipasẹ module agbara ti ko ni ipilẹ ṣugbọn nipasẹ awọn alafo. PIN jade le yipada ni ibamu si iṣeto ni. Wo iwe data ọja fun ipo PIN jade. Ohun elo kọọkan, PCM, PCB, ati gbigbe spacers yatọ ati pe o gbọdọ ṣe ayẹwo lori ipilẹ-ọrọ nipasẹ ọran.

BL1, BL2, ati Apejọ BL3 lori PCB Kanna

1. Apejuwe Apejọ jẹ ti awọn modulu agbara ti ko ni ipilẹ mẹta: Awọn modulu agbara ipilẹ meji BL1 fun Afara atunṣe, BL2 kan, ati module agbara ipilẹ BL3 kan fun iṣeto afara mẹta-alakoso.

• Apejọ fun iyipada AC meji lori module agbara BL3 lati ṣe matrix olubasọrọ kan fun iran agbara ọkọ ofurufu (to 50 kW).

Ipari

Akọsilẹ ohun elo yii n pese awọn iṣeduro nipa iṣagbesori ti module ti ko ni ipilẹ. Lilo awọn ilana wọnyi yoo ṣe iranlọwọ idinku aapọn ẹrọ lori PCB ati module agbara ailopin lati rii daju iṣẹ ṣiṣe igba pipẹ ti eto naa. Awọn ilana iṣagbesori si ifọwọ igbona gbọdọ tun tẹle lati ṣaṣeyọri resistance igbona ti o kere julọ lati awọn eerun agbara si isalẹ lati kula. Gbogbo awọn iṣẹ wọnyi jẹ pataki lati ṣe iṣeduro igbẹkẹle eto ti o dara julọ.

Àtúnyẹwò History

Àtúnyẹwò	Ọjọ	Apejuwe
A	11/2021	Awọn ayipada wọnyi ni a ṣe ninu atunyẹwo yii: Ṣe imudojuiwọn iwe-ipamọ gẹgẹbi awọn iṣedede Microchip. Nọmba iwe-ipamọ ti ni imudojuiwọn si DS00004306. Nọmba akọsilẹ ohun elo ti ni imudojuiwọn si AN4306.

Microchip naa Webojula

Microchip pese atilẹyin ori ayelujara nipasẹ wa webojula ni www.microchip.com/. Eyi webojula ti wa ni lo lati ṣe files ati alaye awọn iṣọrọ wa si awọn onibara. Diẹ ninu akoonu ti o wa pẹlu:

• Atilẹyin ọja: Awọn iwe data ati errata, awọn akọsilẹ ohun elo ati sample eto, oniru oro, olumulo ká itọsọna ati hardware support awọn iwe aṣẹ, titun software tu ati ki o gbepamo software
• Atilẹyin Imọ-ẹrọ Gbogbogbo: Awọn ibeere ti a beere nigbagbogbo (Awọn FAQ), awọn ibeere atilẹyin imọ-ẹrọ, awọn ẹgbẹ ijiroro lori ayelujara, atokọ awọn ọmọ ẹgbẹ eto alabaṣepọ apẹrẹ Microchip
• Iṣowo ti Microchip: Oluyan ọja ati awọn itọsọna aṣẹ, awọn idasilẹ atẹjade Microchip tuntun, atokọ ti awọn apejọ ati awọn iṣẹlẹ, awọn atokọ ti awọn ọfiisi tita Microchip, awọn olupin kaakiri ati awọn aṣoju ile-iṣẹ

Ọja Change iwifunni Service

Iṣẹ ifitonileti iyipada ọja Microchip ṣe iranlọwọ lati jẹ ki awọn alabara wa lọwọlọwọ lori awọn ọja Microchip. Awọn alabapin yoo gba awọn iwifunni imeeli nigbakugba ti awọn ayipada ba wa, awọn imudojuiwọn, awọn atunyẹwo tabi errata ti o ni ibatan si ẹbi ọja kan tabi ohun elo idagbasoke ti iwulo. Lati forukọsilẹ, lọ si www.microchip.com/pcn ki o si tẹle awọn ilana ìforúkọsílẹ.

Onibara Support

Awọn olumulo ti awọn ọja Microchip le gba iranlọwọ nipasẹ awọn ikanni pupọ:

• Olupin tabi Aṣoju
• Agbegbe Sales Office
• Onimọ-ẹrọ Awọn ojutu ti a fi sii (ESE)
• Oluranlowo lati tun nkan se

Awọn onibara yẹ ki o kan si olupin wọn, aṣoju tabi ESE fun atilẹyin. Awọn ọfiisi tita agbegbe tun wa lati ṣe iranlọwọ fun awọn alabara. Atokọ ti awọn ọfiisi tita ati awọn ipo wa ninu iwe yii. Imọ support wa nipasẹ awọn webojula ni: www.microchip.com/support

Ẹya Idaabobo koodu Awọn ẹrọ Microchip

Ṣe akiyesi awọn alaye atẹle ti ẹya aabo koodu lori awọn ọja Microchip

• Awọn ọja Microchip pade awọn pato ti o wa ninu Iwe Data Microchip pato wọn.
• Microchip gbagbọ pe ẹbi ti awọn ọja wa ni aabo nigba lilo ni ọna ti a pinnu, laarin awọn pato iṣẹ, ati labẹ awọn ipo deede.
• Awọn iye Microchip ati ibinu ṣe aabo awọn ẹtọ ohun-ini ọgbọn rẹ. Awọn igbiyanju lati irufin awọn ẹya aabo koodu ti ọja Microchip jẹ eewọ muna ati pe o le rú Ofin Aṣẹ-lori Ẹgbẹrun Ọdun Digital.
• Bẹni Microchip tabi eyikeyi olupese semikondokito miiran le ṣe iṣeduro aabo koodu rẹ. Idaabobo koodu ko tumọ si pe a n ṣe iṣeduro ọja naa jẹ “aibikita”. Idaabobo koodu ti wa ni idagbasoke nigbagbogbo. Microchip ti pinnu lati ni ilọsiwaju nigbagbogbo awọn ẹya aabo koodu ti awọn ọja wa.

Ofin Akiyesi

Atẹjade yii ati alaye ti o wa ninu rẹ le ṣee lo pẹlu awọn ọja Microchip nikan, pẹlu lati ṣe apẹrẹ, idanwo, ati ṣepọ awọn ọja Microchip pẹlu ohun elo rẹ. Lilo alaye yii ni ọna miiran ti o lodi si awọn ofin wọnyi. Alaye nipa awọn ohun elo ẹrọ ti pese fun irọrun rẹ nikan ati pe o le rọpo nipasẹ awọn imudojuiwọn. O jẹ ojuṣe rẹ lati rii daju pe ohun elo rẹ ni ibamu pẹlu awọn pato rẹ. Kan si ọfiisi tita Microchip agbegbe rẹ fun atilẹyin afikun tabi, gba atilẹyin afikun ni www.microchip.com/en-us/support/design-help/client-support-services.

ALAYE YI NI MICROCHIP “BI O SE WA”. MICROCHIP KO SE Aṣoju TABI ATILẸYIN ỌJA TI IRU KANKAN BOYA KIAKIA TABI TỌRỌ, KỌ TABI ẹnu, Ilana tabi Bibẹkọkọ, ti o jọmọ ALAYE NAA SUGBON KO NI OPIN SI KANKAN, LATI IKILỌ ỌRỌ, Idi PATAKI, TABI ATILẸYIN ỌJA JẸRẸ SI IPO RẸ, DARA, TABI IṢẸ. LAISI iṣẹlẹ ti yoo ṣe oniduro fun eyikeyi aiṣedeede, PATAKI, ijiya, isẹlẹ, tabi ipadanu, bibajẹ, iye owo, tabi inawo, tabi inawo ti eyikeyi iru ohunkohun ti o jọmọ si awọn alaye tabi anfani, ti o ba ti lo, TI O SEESE TABI APAJỌ NAA NI IṢẸTẸ tẹlẹ? SI AWỌN NIPA NIPA NIPA TI OFIN, LAPAPA LAPAPO MICROCHIP LORI Gbogbo awọn ẹtọ ni eyikeyi ọna ti o jọmọ ALAYE TABI LILO RE KO NI JU NOMBA TI AWỌN ỌWỌ, TI O BA KAN, TI O ti san taara lati ṣe alaye.

Lilo awọn ẹrọ Microchip ni atilẹyin igbesi aye ati/tabi awọn ohun elo aabo jẹ patapata ni ewu olura, ati pe olura gba lati daabobo, ṣe idalẹbi ati dimu Microchip ti ko lewu lati eyikeyi ati gbogbo awọn bibajẹ, awọn ẹtọ, awọn ipele, tabi awọn inawo ti o waye lati iru lilo. Ko si awọn iwe-aṣẹ ti a gbe lọ, laisọtọ tabi bibẹẹkọ, labẹ eyikeyi awọn ẹtọ ohun-ini imọ Microchip ayafi bibẹẹkọ ti sọ.

Awọn aami-išowo

Orukọ Microchip ati aami, aami Microchip, Adaptec, AnyRate, AVR, AVR logo, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LAN maXStyMD, Link maXTouch, MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash , Symmetricom, SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, ati XMEGA jẹ aami-išowo ti a forukọsilẹ ti Microchip Technology Incorporated ni AMẸRIKA ati awọn orilẹ-ede miiran. AgileSwitch, APT, ClockWorks, Ile-iṣẹ Awọn Solusan Iṣakoso ti a fi sinu, EtherSynch, Flashtec, Iṣakoso Iyara Hyper, fifuye HyperLight, IntelliMOS, Libero, ibujoko moto, mTouch, Powermite 3, Edge Precision, ProASIC, ProASIC Plus, ProASIC Plus logo, Idakẹjẹ Waya , SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, WinPath, ati ZL jẹ aami-išowo ti a forukọsilẹ ti Microchip Technology Incorporated ni AMẸRIKA

Imukuro Bọtini nitosi, AKS, Analog-fun-The-Digital Age, Eyikeyi Kapasito, AnyIn, AnyOut, Yipada Augmented, BlueSky, BodyCom, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Iṣeduro Ayika, Iṣeduro DAMIC , ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-Circuit Serial Programming, ICSP, INICnet, Ti o jọra oye, Inter-Chip Asopọmọra, JitterBlocker, Knob-on-Display, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB aami ifọwọsi, MPLIB, MPLINK, MultiTRAK, NetDetach, NVM Express, NVMe, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, READ , Ripple Blocker, RTAX, RTG4, SAMICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Total ìfaradà, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, ati ZENA jẹ aami-iṣowo ti Microchip Technology Incorporated ni AMẸRIKA ati awọn orilẹ-ede miiran.

SQTP jẹ aami iṣẹ ti Microchip Technology Incorporated ni AMẸRIKA
Aami Adaptec, Igbohunsafẹfẹ lori Ibeere, Imọ-ẹrọ Ibi ipamọ ohun alumọni, Symmcom, ati Akoko Igbẹkẹle jẹ aami-iṣowo ti a forukọsilẹ ti Microchip Technology Inc. ni awọn orilẹ-ede miiran.
GestIC jẹ aami-iṣowo ti a forukọsilẹ ti Microchip Technology Germany II GmbH & Co.KG, oniranlọwọ ti Microchip Technology Inc., ni awọn orilẹ-ede miiran.
Gbogbo awọn aami-iṣowo miiran ti a mẹnuba ninu rẹ jẹ ohun-ini ti awọn ile-iṣẹ wọn.

© 2021, Microchip Technology Incorporated ati awọn ẹka rẹ. Gbogbo awọn ẹtọ wa ni ipamọ.
ISBN: 978-1-5224-9309-9

Didara Management System

Fun alaye nipa Awọn ọna iṣakoso Didara Microchip, jọwọ ṣabẹwo www.microchip.com/quality.

Ni agbaye Titaja ati Service

AMERIKA	ASIA/PACIFIC	ASIA/PACIFIC	EUROPE
Ile-iṣẹ Ile-iṣẹ 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tẹli: 480-792-7200 Faksi: 480-792-7277 Oluranlowo lati tun nkan se: www.microchip.com/support Web Adirẹsi: www.microchip.com Atlanta Duluth, GA Tẹli: 678-957-9614 Faksi: 678-957-1455 Austin, TX Tẹli: 512-257-3370 Boston Westborough, MA Tẹli: 774-760-0087 Faksi: 774-760-0088 Chicago Itasca, IL Tẹli: 630-285-0071 Faksi: 630-285-0075 Dallas Addison, TX Tẹli: 972-818-7423 Faksi: 972-818-2924 Detroit Novi, MI Tẹli: 248-848-4000 Houston, TX Tẹli: 281-894-5983 Indianapolis Noblesville, NI Tẹli: 317-773-8323 Faksi: 317-773-5453 Tẹli: 317-536-2380 Los Angeles Mission Viejo, CA Tẹli: 949-462-9523 Faksi: 949-462-9608 Tẹli: 951-273-7800 Raleigh, NC Tẹli: 919-844-7510 Niu Yoki, NY Tẹli: 631-435-6000 San Jose, CA Tẹli: 408-735-9110 Tẹli: 408-436-4270 Canada – Toronto Tẹli: 905-695-1980 Faksi: 905-695-2078	Australia – Sydney Tẹli: 61-2-9868-6733 Ilu China - Ilu Beijing Tẹli: 86-10-8569-7000 China – Chengdu Tẹli: 86-28-8665-5511 China – Chongqing Tẹli: 86-23-8980-9588 China – Dongguan Tẹli: 86-769-8702-9880 China – Guangzhou Tẹli: 86-20-8755-8029 China – Hangzhou Tẹli: 86-571-8792-8115 China – Hong Kong SAR Tẹli: 852-2943-5100 China – Nanjing Tẹli: 86-25-8473-2460 China – Qingdao Tẹli: 86-532-8502-7355 China – Shanghai Tẹli: 86-21-3326-8000 China - Shenyang Tẹli: 86-24-2334-2829 China – Shenzhen Tẹli: 86-755-8864-2200 China – Suzhou Tẹli: 86-186-6233-1526 China – Wuhan Tẹli: 86-27-5980-5300 China – Xian Tẹli: 86-29-8833-7252 China – Xiamen Tẹli: 86-592-2388138 China – Zhuhai Tẹli: 86-756-3210040	India – Bangalore Tẹli: 91-80-3090-4444 India – New Delhi Tẹli: 91-11-4160-8631 India - Pune Tẹli: 91-20-4121-0141 Japan - Osaka Tẹli: 81-6-6152-7160 Japan – Tokyo Tẹli: 81-3-6880-3770 Koria – Daegu Tẹli: 82-53-744-4301 Korea – Seoul Tẹli: 82-2-554-7200 Malaysia – Kuala Lumpur Tẹli: 60-3-7651-7906 Malaysia - Penang Tẹli: 60-4-227-8870 Philippines – Manila Tẹli: 63-2-634-9065 Singapore Tẹli: 65-6334-8870 Taiwan – Hsin Chu Tẹli: 886-3-577-8366 Taiwan – Kaohsiung Tẹli: 886-7-213-7830 Taiwan – Taipei Tẹli: 886-2-2508-8600 Thailand - Bangkok Tẹli: 66-2-694-1351 Vietnam - Ho Chi Minh Tẹli: 84-28-5448-2100	Austria – Wels Tẹli: 43-7242-2244-39 Faksi: 43-7242-2244-393 Denmark – Copenhagen Tẹli: 45-4485-5910 Faksi: 45-4485-2829 Finland – Espoo Tẹli: 358-9-4520-820 Faranse - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Jẹmánì – Garching Tẹli: 49-8931-9700 Jẹmánì – Haan Tẹli: 49-2129-3766400 Jẹmánì – Heilbronn Tẹli: 49-7131-72400 Jẹmánì – Karlsruhe Tẹli: 49-721-625370 Jẹmánì – München Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Jẹmánì – Rosenheim Tẹli: 49-8031-354-560 Israeli - Ra'anana Tẹli: 972-9-744-7705 Italy – Milan Tẹli: 39-0331-742611 Faksi: 39-0331-466781 Italy – Padova Tẹli: 39-049-7625286 Netherlands - Drunen Tẹli: 31-416-690399 Faksi: 31-416-690340 Norway – Trondheim Tẹli: 47-72884388 Poland - Warsaw Tẹli: 48-22-3325737 Romania - Bucharest Tel: 40-21-407-87-50 Spain – Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden – Gothenberg Tel: 46-31-704-60-40 Sweden – Dubai Tẹli: 46-8-5090-4654 UK – Wokingham Tẹli: 44-118-921-5800 Faksi: 44-118-921-5820

© 2021 Microchip Technology Inc. ati awọn ẹka rẹ.
DS00004306A

Awọn iwe aṣẹ / Awọn orisun

MICROCHIP AN4306 Iṣagbesori Ilana fun Ipilẹ Power Module [pdf] Itọsọna olumulo Ilana Iṣagbesori AN4306 fun Module Agbara Aini ipilẹ, AN4306, Ilana Iṣagbesori fun Module Agbara AlailẹgbẹBaseless Power Module

Awọn itọkasi

• Itọsọna olumulo