MICROCHIP AN4306 Fa'atonuga fa'apipi'i mo le fa'aogaina o le eletise e leai ni fa'avae

Folasaga

O lenei tusi talosaga o loʻo tuʻuina atu ai fautuaga e faʻapipiʻi saʻo le module eletise leai se faavae i le vevela ma le PCB. Mulimuli i faʻatonuga faʻapipiʻi e faʻatapulaʻa uma le mamafa o le vevela ma le masini.

Fefa'ataua'iga i le va o le fa'avae ole eletise ma le vevela

O lenei vaega o lo'o fa'amatalaina ai le feso'ota'iga i le va o le paoa e leai se fa'avae ma le vevela.

Vaega Suiga Mea (PCM) Taofi

 

Ina ia ausia le tulaga aupito maualalo i le vevela goto tete'e vevela, se vaega suiga o meafaitino teuina i honeycomb e mafai ona faaaogaina i luga o le faavae eletise module. Fa'aaogā se faiga lolomi mata e fa'amautinoa ai se fa'aputuga tutusa o le mafiafia aupito maualalo o le 150 μm i le 200 μm (5.9 mils i le 7.8 mils) i luga o le fa'aogaina o le eletise leai se fa'avae, e pei ona fa'aalia i le ata o lo'o i lalo. Microchip fautuaina Loctite PSX-Pe. O lenei ituaiga fa'aoga fa'amama e fa'aitiitia ai le pamu i fafo. o le pamu e mafua mai i le uila vevela e tupu i le va o luga o le lua.

Pepa alumini ma PCM

Ina ia ausia le tulaga aupito maualalo-i-vevela goto tete'e vevela, o le alumini pepa ma PCM i itu uma e lua (Kunze Crayotherm-KU-ALF5) e mafai ona faaaogaina i le va o le faavae eletise module ma le vevela e pei ona faaalia i le ata o loo i lalo.

Fa'apipi'i le Fa'avae e leai ni fa'avae i le Fa'a'avevela

O le fa'apipi'iina sa'o o le fa'aogaina o le eletise e leai se fa'avae i le fa'avevela e mana'omia e fa'amautinoa lelei le felauaiga o le vevela. E tatau ona mafolafola ma mama (leai se palapala, leai se pala, ma leai se mea e faaleagaina) e aloese ai mai le mamafa o masini pe a fa'apipi'i le module eletise leai se faavae ma aloese mai le faateleina o le tete'e vevela.

Fa'aaliga: Fautuaina mafolafola e <50 μm mo le 100 mm faʻaauau ma fautuaina roughness Rz 10. Tuu le faavae eletise module ma le PCM poʻo le alumini pepa ma PCM luga aʻe pu vevela ma faʻaoga i ai se faʻamalosi laʻititi.

• Mo le BL1 ma le BL2 e leai se faavae eletise module:
  • Fa'aofi le sikulima M4 ma le fufulu vaipuna (DIN 137A) i totonu o le pu fa'apipi'i. E tatau ona 8 mm le lautele o le ulu fa'a sikulila ma le taele. Fa'amau le fa'ailoga se'ia o'o i le fa'ai'uga fa'ai'u. (Va'ai i le pepa fa'amaumauga o oloa mo le maualuga maualuga e fa'atagaina).
• Mo le BL3 leai se faavae mana module:
  • Fa'aofi i totonu o pu fa'apipi'i le M3 fa'amau ma fa'amau vaipuna (DIN 137A). E tatau ona 6 mm le lautele o le ulu fa'a sikulima ma le taele.

• O sikulima M3 e lima e tatau ona faʻapipiʻi i le 1/3 o le malosi mulimuli. Fa'atonuga: 1 – 2 – 4 – 3 – 5.
• O sikulima M3 e lima e tatau ona faʻapipiʻi i le 2/3 o le malosi mulimuli. Fa'atonuga: 1 – 5 – 3 – 4 – 2.
• O sikulima M3 e lima e tatau ona faʻapipiʻi i le faʻamau mulimuli. Fa'atonuga: 3 – 5 – 4 – 2 – 1.

Va'ai i le pepa fa'amaumauga o oloa mo le maualuga maualuga e fa'atagaina. Mo le fa'atinoina o lenei fa'agaioiga mo modules uma e leai ni fa'avae, fa'aoga se sikuli fa'amalo fa'atasi.

PCB Fonotaga i luga ole Polokalama Malosiaga leai se faavae

O laasaga nei e faʻapipiʻi ai le PCB i luga o le module eletise leai se faavae.

1. Fa'apipi'i va'ava'ai i luga o le fa'a'a'a'a'a e latalata ile fa'aoga eletise leai se fa'avae. E tatau ona i ai i le 10±0.1 mm le maualuga o va'aiga.
   • Fa'aaliga: O le module leai se faavae e 9.3 mm le maualuga. E tatau ona latalata le spacers i modules eletise e leai se faavae e aloese ai mai soʻo se tetete aʻo faʻaaloalo i manaoga faʻapipiʻi, e pei ona faʻaalia i le ata o loʻo i lalo. O le PCB e tatau ona faʻapipiʻi i luga o le eletise e leai se faavae ma faʻapipiʻi i avanoa. E fautuaina le fa'apipi'i 0.6 Nm (5 lbf·in).
2. Fa'amau uma pine eletise o le module eletise i le PCB. E le mana'omia le fa'amama solder flux e fa'apipi'i ai le PCB i luga o le module talu ai e le fa'atagaina le fa'amamāina o module vai.

Fa'aaliga: Aua neʻi toe fesuiaʻi nei laʻasaga e lua, aua afai e faʻapipiʻi muamua pine uma i le PCB, o le faʻapipiʻiina o le PCB i luga o le vaʻa e mafua ai le faʻaleagaina o le PCB, e oʻo atu ai i le faʻalavelave faʻainisinia e mafai ona faʻaleagaina ai ala poʻo le motusia o vaega i luga o le PCB.

Mo le gaosiga lelei, e mafai ona faʻaaogaina se faʻagasologa o galu e solder le terminals i le PCB. Talosaga ta'itasi, goto vevela ma PCB e mafai ona eseese; e tatau ona su'esu'eina le sosologa i luga ole laiga. Po'o le a lava le tulaga, e tatau ona si'osi'omia pine ta'itasi se vaega paleni lelei o solder.

O pu i totonu o le PCB (silasila i le Ata 4-1) e mana'omia e aveese ai fa'amau fa'apipi'i o lo'o fa'amauina i lalo le fa'aogaina o le eletise e leai se fa'avae i le fa'a'avevela. O nei pu e tatau ona lapopoa mo le ulu sikulima ma fufulu e mafai ona pasia saoloto, e mafai ai ona faapalepale masani i le nofoaga o pu PCB.

O le va i le va o le pito i lalo o le PCB ma le eletise eletise e leai se faavae e matua maualalo. E le fautuaina e le Microchip le fa'aogaina o vaega pu i luga a'e o le module. Ina ia fa'aitiitia le fesuia'i i luga voltages, SMD decoupling capacitors o laina eletise VBUS ma 0/VBUS e mafai ona faʻaaogaina. (Tagai i le Ata 4-1). Ia fa'amautinoa le saogalemu a'o tagofia vaega mamafa e pei o le eletise po'o le polypropylene capacitors, transformers, po'o le inductors o lo'o tu'u i tafatafa o le eletise. Afai o nei vaega o loʻo i totonu o le eria e tasi, faʻapipiʻi avanoa e faʻapea o le mamafa o nei vaega o loʻo i luga o le laupapa e le faʻaogaina e le eletise leai se faavae ae e vaʻavaʻai. O le pine i fafo e mafai ona sui e tusa ai ma le faʻatulagaga. Va'ai le fa'amatalaga o oloa mo le nofoaga o lo'o fa'atu ai pine. Talosaga ta'itasi, PCM, PCB, ma avanoa avanoa e 'ese'ese ma e tatau ona su'esu'eina fa'atasi ma lea mataupu.

BL1, BL2, ma BL3 Fonotaga i luga ole PCB tutusa

1. Fa'amatalaga fa'apotopotoga e faia i ni fa'aoga eletise e tolu e leai se fa'avae: E lua BL1 fa'avae eletise eletise mo le alalaupapa fa'asa'o, tasi BL2, ma le tasi BL3 leai se faavae mo le fa'atulagaina o alalaupapa tolu-vaega.

• Fonotaga mo se kisi lua AC i luga o se masini eletise BL3 e faʻatino ai se fesoʻotaʻiga matrix mo le gaosiga o le eletise (e oʻo atu i le 50 kW).

Fa'ai'uga

O lenei tusi talosaga e maua ai fautuaga e uiga i le faʻapipiʻiina o le module leai se faavae. O le faʻaaogaina o nei faʻatonuga o le a fesoasoani e faʻaitiitia ai le mamafa faʻainisinia i luga o le PCB ma le faʻaogaina o le eletise e faʻamautinoa ai le faʻagaioia umi o le faiga. E tatau fo'i ona mulimulita'i fa'atonuga fa'apipi'i i le fa'a'avevela ina ia maua ai le fa'amaualalo aupito maualalo mai le meataalo eletise e o'o atu i le fa'amalo. O nei fa'agaioiga uma e mana'omia e fa'amautinoa ai le fa'atuatuaina lelei o le faiga.

Toe Iloilo Tala'aga

Toe Iloiloga	Aso	Fa'amatalaga
A	11/2021	O suiga nei ua faia i lenei toe iloiloga: Fa'afou le pepa e tusa ai ma tulaga Microchip. O le numera o le pepa na faʻafouina i le DS00004306. Ole numera ole tusi talosaga na faʻafouina ile AN4306.

Le Microchip Webnofoaga

Microchip e maua le lagolago i luga ole laiga e ala i la matou webnofoaga i www.microchip.com/. Lenei web'upega tafa'ilagi e fa'aoga e fai ai files ma fa'amatalaga faigofie ona maua e tagata fa'atau. O nisi o mea e maua e aofia ai:

• Lagolago oloa: Pepa o faamatalaga ma mea sese, tusi talosaga ma samppolokalame, punaoa mamanu, ta'iala a le tagata fa'aoga ma pepa lagolago mo meafaigaluega, fa'asalalauga fou fa'akomepiuta ma polokalama fa'amaumauga
• Lagolago Fa'ainisinia lautele: Fesili e Fai soo (FAQs), talosaga lagolago faʻapitoa, vaega faʻatalanoa i luga ole laiga, Microchip design partner programme list
• Pisinisi o Microchip: Filifilia oloa ma taʻiala faʻatonu, faʻasalalauga lata mai a le Microchip, lisi o semina ma mea na tutupu, lisi o ofisa faʻatau Microchip, tufatufaina ma sui fale gaosi oloa

Au'aunaga Fa'asilasilaga Suiga o Mea

O le auaunaga fa'asilasilaga suiga o oloa a Microchip e fesoasoani e fa'amautu ai tagata fa'atau i oloa Microchip. O le a maua e le au fai saofaga faʻamatalaga imeli i soʻo se taimi e iai suiga, faʻafouga, toe teuteuga poʻo mea sese e fesoʻotaʻi ma se aiga oloa faʻapitoa poʻo se meafaigaluega faʻaleleia e fiafia i ai. Ina ia lesitala, alu i www.microchip.com/pcn ma mulimuli i faatonuga resitala.

Lagolago Tagata Fa'atau

O tagata fa'aoga o oloa Microchip e mafai ona maua fesoasoani e ala i le tele o auala:

• Fa'asoa po'o le Sui
• Ofisa Fa'atauga Fa'alotoifale
• Embedded Solutions Engineer (ESE)
• Lagolago Fa'atekinisi

E tatau i tagata fa'atau ona fa'afeso'ota'i le latou tufatufaina, sui po'o le ESE mo le lagolago. O loʻo avanoa foʻi ofisa faʻatau i le lotoifale e fesoasoani i tagata faʻatau. O se lisi o ofisa fa'atau ma nofoaga o lo'o aofia i totonu o lenei pepa. E maua le lagolago fa'apitoa e ala ile webnofoaga i: www.microchip.com/support

Fa'ailoga Puipuiga o Fa'ailoga Fa'atonu a Microchip

Mataʻituina faʻamatalaga o loʻo i lalo o le faʻaogaina o tulafono faʻapitoa i oloa Microchip

• O oloa Microchip e fetaui ma faʻamatalaga o loʻo i totonu o la latou Pepa Faʻamatalaga Microchip.
• E talitonu Microchip o lona aiga o oloa e saogalemu pe a faʻaaogaina i le auala faʻamoemoeina, i totonu o faʻamatalaga faʻaogaina, ma i lalo o tulaga masani.
• Microchip fa'atauaina ma puipuia fa'amalosi ana aia tatau tau meatotino. O taumafaiga e soli le tulafono o le puipuiga o le oloa Microchip e matua fa'asaina ma e ono solia ai le Digital Millennium Copyright Act.
• E le mafai e le Microchip poʻo se isi mea gaosi semiconductor ona faʻamaonia le saogalemu o lana tulafono. O le puipuiga o tulafono laiti e le o lona uiga tatou te faʻamautinoa o le oloa e "le mafai ona motusia". O le puipuiga o tulafono laiti o lo'o fa'asolosolo pea. Microchip ua tuuto atu i le faʻaauauina pea o le faʻaleleia atili o uiga puipuia o tulafono a tatou oloa.

Faasilasilaga Faaletulafono

O lenei lomiga ma faʻamatalaga o loʻo i totonu e mafai ona faʻaaogaina naʻo oloa Microchip, e aofia ai le mamanu, suʻega, ma tuʻufaʻatasia oloa Microchip ma lau talosaga. O le fa'aogaina o nei fa'amatalaga i so'o se isi lava faiga e solia ai nei aiaiga. O fa'amatalaga e uiga i le fa'aogaina o masini e tu'uina atu mo na'o lou fa'amalieina ma e ono suia i fa'afouga. O lau matafaioi le faʻamautinoa o lau talosaga e fetaui ma au faʻamatalaga. Fa'afeso'ota'i lou ofisa fa'atau Microchip fa'apitonu'u mo se lagolago fa'aopoopo pe, maua se lagolago fa'aopoopo ile www.microchip.com/en-us/support/design-help/client-support-services.

O LENEI FAʻAMATALAGA E TUUINA E MICROCHIP "AS IS". E LEAI FAIA e le MICROCHIP ni faʻataʻitaʻiga poʻo se faʻamaoniga o soʻo se ituaiga pe faʻaalia pe faʻaalia, tusitusi pe tautala, tulāfono poʻo se isi mea, e fesoʻotaʻi ma faʻamatalaga e aofia ai ae le tapulaʻa i soʻo se faʻamaoniaga faʻamaonia, faʻamaonia, faʻamaonia, faʻamaonia, faʻamaonia. FAASOLOGA E FAI I ONA TULAGA, TULAGA, POO LE FAIGALUEGA. E LEAI SE MEA E TATAU AI MICROCHIP MO SO'O SE FA'AMATALAGA, FA'AMATALAGA, FA'ASA'OGA, FA'ASO'O, PO'O LE FA'AI'UINA, FA'AFIA, TAU, PO'O LE TU'UINA O SO'O SE I'UGA SO'O SE FA'AMATALAGA PO'O LONA FA'A'OA'OGA, E ui i lea, fa'atupu, e tusa lava pe fa'aletonu. O LE FA'AFIO PO'O LE FA'AFIA E MAFAI ILOA? I LE AGATO'O FA'AALIGA E LE TULAFONO, O LE UMA AOFA'I A MICROCHIP I TOTOGI UMA I SO'O SE AUALA E FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OA'OGA E LE'A LOLOA I LE FA'AMATALAGA O TOTOGI, AFAI E IAI, NA E TOTOINA SA'O I LE MICROCHIP MO LE FA'AMATALAGA.

O le fa'aogaina o masini Microchip i le tausiga o le ola ma/po'o le saogalemu o lo'o i le tulaga lamatia o le tagata fa'atau, ma e malie le tagata fa'atau e puipuia, fa'aleaga ma taofia Microchip le afaina mai so'o se mea leaga, tagi, suti, po'o tupe alu e mafua mai i lea fa'aoga. E leai ni laisene e tu'uina atu, fa'aalia po'o se isi mea, i lalo o so'o se Microchip aia tatau tau le atamai se'i vagana ua ta'ua.

Fa'ailoga Fa'ailoga

Le igoa Microchip ma le logo, le Microchip logo, Adaptec, AnyRate, AVR, AVR logo, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXStylus maXTouch, MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash , Symmetricom, SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, ma XMEGA o fa'ailoga fa'amaufa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u. AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed ​​Control, HyperLight Load, IntelliMOS, Libero, nofoa afi, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet- Wire , SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, WinPath, ma ZL o faʻailoga resitalaina o Microchip Technology Incorporated i Amerika.

Taofi Fa'aigoa Fa'atasi, AKS, Analog-for-the-Digital Age, So'o se Capacitor, So'o se In, So'oOut, Suiga Fa'aopoopo, BlueSky, BodyCom, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching , ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Parallel, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Faʻamaonia logo, MPLIB, MPLINK, MultiTRAK, NetDetach, NVM Express, NVMe, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE , Ripple Blocker, RTAX, RTG4, SAMICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Aofa'i Uma, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, ma ZENA o fa'ailoga fa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.

SQTP ose fa'ailoga tautua a Microchip Technology Incorporated i Amerika
O le logo Adaptec, Frequency on Demand, Silicon Storage Technology, Symmcom, ma Trusted Time o fa'ailoga fa'amaufa'ailoga a Microchip Technology Inc. i isi atunu'u.
GestIC ose fa'ailoga fa'amaufa'ailoga a Microchip Technology Germany II GmbH & Co. KG, ose lala o Microchip Technology Inc., i isi atunu'u.
O isi fa'ailoga tau fefa'ataua'iga uma o lo'o ta'ua ii o meatotino a latou kamupani.

© 2021, Microchip Technology Incorporated ma ona lala. Ua Taofia Aia Tatau Uma.
ISBN: 978-1-5224-9309-9

Faiga Fa'atonuga

Mo faʻamatalaga e uiga i Microchip's Quality Management Systems, faʻamolemole asiasi www.microchip.com/quality.

Fa'atauga ma Au'aunaga i le Lalolagi Atoa

AMERIKA	ASIA/ PASIFIK	ASIA/ PASIFIK	Europa
Ofisa Autasi 2355 Sisifo Chandler Blvd. Chandler, AZ 85224-6199 Telefoni: 480-792-7200 Fax: 480-792-7277 Lagolago Fa'atekinisi: www.microchip.com/support Web tuatusi: www.microchip.com Atlanta Duluth, GA Telefoni: 678-957-9614 Fax: 678-957-1455 Austin, TX Telefoni: 512-257-3370 Boston Westborough, MA Telefoni: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Telefoni: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Telefoni: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Telefoni: 248-848-4000 Houston, TX Telefoni: 281-894-5983 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Telefoni: 317-536-2380 Los Angeles Mission Viejo, CA Telefoni: 949-462-9523 Fax: 949-462-9608 Telefoni: 951-273-7800 Raleigh, NC Telefoni: 919-844-7510 Niu Ioka, NY Telefoni: 631-435-6000 San Jose, CA Telefoni: 408-735-9110 Telefoni: 408-436-4270 Kanata - Toronto Telefoni: 905-695-1980 Fax: 905-695-2078	Ausetalia – Sini Telefoni: 61-2-9868-6733 Saina - Beijing Telefoni: 86-10-8569-7000 Saina – Chengdu Telefoni: 86-28-8665-5511 Saina – Chongqing Telefoni: 86-23-8980-9588 Saina – Dongguan Telefoni: 86-769-8702-9880 Saina – Guangzhou Telefoni: 86-20-8755-8029 Saina – Hangzhou Telefoni: 86-571-8792-8115 Saina - Hong Kong SAR Telefoni: 852-2943-5100 Saina – Nanjing Telefoni: 86-25-8473-2460 Saina – Qingdao Telefoni: 86-532-8502-7355 Saina – Shanghai Telefoni: 86-21-3326-8000 Saina – Shenyang Telefoni: 86-24-2334-2829 Saina – Shenzhen Telefoni: 86-755-8864-2200 Saina – Suzhou Telefoni: 86-186-6233-1526 Saina - Wuhan Telefoni: 86-27-5980-5300 Saina – Xian Telefoni: 86-29-8833-7252 Saina – Xiamen Telefoni: 86-592-2388138 Saina – Zhuhai Telefoni: 86-756-3210040	Initia – Bangalore Telefoni: 91-80-3090-4444 Initia – New Delhi Telefoni: 91-11-4160-8631 Initia - Pune Telefoni: 91-20-4121-0141 Iapani - Osaka Telefoni: 81-6-6152-7160 Iapani - Tokyo Telefoni: 81-3-6880-3770 Korea – Daegu Telefoni: 82-53-744-4301 Korea – Seoul Telefoni: 82-2-554-7200 Meleisia – Kuala Lumpur Telefoni: 60-3-7651-7906 Meleisia – Penang Telefoni: 60-4-227-8870 Filipaina – Manila Telefoni: 63-2-634-9065 Singapore Telefoni: 65-6334-8870 Taiuani – Hsin Chu Telefoni: 886-3-577-8366 Taiuani – Kaohsiung Telefoni: 886-7-213-7830 Taiuani – Taipei Telefoni: 886-2-2508-8600 Taialani – Bangkok Telefoni: 66-2-694-1351 Vietnam – Ho Chi Minh Telefoni: 84-28-5448-2100	Ausetalia – Uelese Telefoni: 43-7242-2244-39 Fax: 43-7242-2244-393 Tenimaka – Copenhagen Telefoni: 45-4485-5910 Fax: 45-4485-2829 Finelani – Espoo Telefoni: 358-9-4520-820 Farani – Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Siamani – Garching Telefoni: 49-8931-9700 Siamani – Haan Telefoni: 49-2129-3766400 Siamani – Heilbronn Telefoni: 49-7131-72400 Siamani – Karlsruhe Telefoni: 49-721-625370 Siamani – Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Siamani – Rosenheim Telefoni: 49-8031-354-560 Isaraelu – Ra’anana Telefoni: 972-9-744-7705 Italia – Milan Telefoni: 39-0331-742611 Fax: 39-0331-466781 Italia – Padova Telefoni: 39-049-7625286 Netherlands – Drunen Telefoni: 31-416-690399 Fax: 31-416-690340 Nouei – Trondheim Telefoni: 47-72884388 Polani – Warsaw Telefoni: 48-22-3325737 Romania – Bucharest Tel: 40-21-407-87-50 Sepania - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Suetena – Gothenberg Tel: 46-31-704-60-40 Suetena - Stockholm Telefoni: 46-8-5090-4654 Peretania - Wokingham Telefoni: 44-118-921-5800 Fax: 44-118-921-5820

© 2021 Microchip Technology Inc. ma ona lala.
DS00004306A

Pepa / Punaoa

MICROCHIP AN4306 Fa'atonuga fa'apipi'i mo le fa'aogaina o le eletise e leai ni fa'avae [pdf] Taiala mo Tagata Fa'aoga AN4306 Fa'atonuga fa'apipi'i mo le fa'aogaina o le eletise e leai ni fa'avae, AN4306, fa'atonuga mo le fa'apipi'iina o le fa'atonuga mo le fa'aogaina o le eletise.

Fa'asinomaga

• Tusi Taiala