MICROCHIP AN4306 Taelo ea ho Hloma bakeng sa Mojule oa Motlakase o se Nang

Selelekela

Sengoloa sena sa kopo se fana ka likhothaletso tsa ho kenya mojule oa motlakase o senang motheo ho siling ea mocheso le PCB. Latela litaelo tse ntseng li eketseha ho fokotsa khatello ea mocheso le ea mochine.

Interface Pakeng tsa Baseless Power Module le Heat Sink

Karolo ena e hlalosa sehokelo pakeng tsa mojule oa motlakase o se nang motheo le sink ea mocheso.

Phase Change Material (PCM) Deposition

 

Ho finyella boemo bo tlaase ka ho fetisisa ba ho hanyetsa mocheso oa mocheso, ho ka sebelisoa mochine oa motlakase o se nang motheo. Sebelisa mokhoa oa ho hatisa skrineng ho etsa bonnete ba hore ho behiloe ka mokhoa o ts'oanang oa botenya ba bonyane ba 150 μm ho isa ho 200 μm (5.9 mils ho isa ho 7.8 mils) mojulung oa motlakase o se nang motheo, joalo ka ha ho bonts'itsoe setšoantšong se latelang. Microchip e khothaletsa Loctite PSX-Pe. Mofuta ona oa sebopeho sa mocheso o fokotsa pompo ea ho tsoa. pump-out e bakoa ke libaesekele tse futhumatsang tse etsahalang lipakeng tsa libaka tse peli tsa ho nyalana.

Lisebelisoa tsa aluminium tse nang le PCM

E le ho finyella boemo bo tlaase ka ho fetisisa ba mocheso oa mocheso oa mocheso oa mocheso, foil ea aluminium e nang le PCM ka mahlakoreng ka bobeli (Kunze Crayotherm-KU-ALF5) e ka sebelisoa pakeng tsa motlakase o se nang motheo le mocheso oa mocheso joalokaha ho bontšitsoe setšoantšong se latelang.

Ho kenya Mojule o se Nang Motheo ho Mocheso oa Mocheso

Ho kenngoa ka mokhoa o nepahetseng ha mojule oa motlakase o se nang motheo ho siling ea mocheso ho bohlokoa ho netefatsa phetisetso e ntle ea mocheso. Mocheso oa mocheso le sebaka se se nang motheo sa motlakase oa motlakase se tlameha ho ba se bataletseng le se hloekile (ho se na litšila, ha ho na kutu, ho se na tšenyo) ho qoba khatello ea mochine ha mochine oa motlakase o se nang motheo o kenngoa le ho qoba ho eketseha ha mocheso oa mocheso.

Hlokomela: Ho khothaletsoa ho batalla ke <50 μm bakeng sa 100 mm e tsoelang pele mme ho khothaletsoa ho ba boima ke Rz 10. Beha mochine oa motlakase o se nang motheo le PCM kapa foil ea aluminium e nang le PCM ka holim'a likoti tsa mocheso oa mocheso 'me u sebelise khatello e nyenyane ho eona.

• Bakeng sa mojule oa matla a se nang motheo oa BL1 le BL2:
  • Kenya sekoti sa M4 le washer ea selemo (DIN 137A) ka mokoting o holisang. Hlooho ea sekoti le bophara ba washer e tlameha ho ba 8 mm e tloaelehileng. Tiisa screw ho fihlela boleng bona ba torque ea ho qetela bo fihletsoe. (Sheba lethathamo la lihlahisoa bakeng sa torque e kholo e lumelletsoeng).
• Bakeng sa mojule oa matla a se nang motheo oa BL3:
  • Kenya li-screws tsa M3 le li-washer tsa selemo (DIN 137A) ka har'a masoba a holang. Hlooho ea sekoti le bophara ba washer e tlameha ho ba 6 mm e tloaelehileng.

• Li-screws tse hlano tsa M3 li tlameha ho kenngoa ho 1/3 ea torque ea ho qetela. Taelo: 1 - 2 - 4 - 3 - 5.
• Li-screws tse hlano tsa M3 li tlameha ho kenngoa ho 2/3 ea torque ea ho qetela. Taelo: 1 - 5 - 3 - 4 - 2.
• Li-screws tse hlano tsa M3 li tlameha ho behoa torque ea ho qetela. Taelo: 3 - 5 - 4 - 2 - 1.

Sheba lethathamo la lihlahisoa bakeng sa torque e kholo e lumelletsoeng. Ho etsa ts'ebetso ena bakeng sa li-module tsohle tse se nang motheo tsa matla, sebelisa screwdriver e nang le torque e laoloang.

Seboka sa PCB ho Module oa Matla a se nang Motheo

Tse latelang ke mehato ea ho kopanya PCB mojulung oa motlakase o se nang motheo.

1. Beha li-spacers holim'a teba ea mocheso haufi le mochine oa motlakase o se nang motheo. Li-spacers li tlameha ho ba bolelele ba 10±0.1 mm.
   • Hlokomela: Mojule o se nang motheo o bolelele ba 9.3 mm. Li-spacers li tlameha ho ba haufi le li-module tsa motlakase tse se nang motheo ho qoba ho thothomela ha ho ntse ho hlompha litlhoko tsa ho kenya letsoho, joalo ka ha ho bonts'itsoe setšoantšong se latelang. PCB e tlameha ho kenngoa mojulung oa motlakase o se nang motheo ebe o hokeloa ho li-spacers. Ho khothaletsoa torque e ntseng e eketseha ea 0.6 Nm (5 lbf·in).
2. Solder lithapo tsohle tsa motlakase tsa mojule oa matla ho PCB. Ha ho na solder flux e hloekileng e hlokahalang ho hokela PCB mojuleng kaha ho hloekisoa ka metsi ka metsi ha ho lumelloe.

Hlokomela: U se ke ua fetola mehato ena e 'meli, hobane haeba lipini tsohle li rekisoa pele ho PCB, ho phunyeletsa PCB holim'a spacers ho baka deformation ea PCB, e lebisang khatellong ea mochine e ka senyang lipina kapa ea senya likarolo tsa PCB.

Bakeng sa tlhahiso e ntle, ts'ebetso ea wave soldering e ka sebelisoa ho rekisa liteishene ho PCB. Tšebeliso e 'ngoe le e' ngoe, mocheso oa mocheso le PCB e ka ba tse fapaneng; wave soldering e tlameha ho hlahlojoa ho latela maemo. Ho sa tsotellehe boemo leha e le bofe, lera le leka-lekaneng la solder le tlameha ho pota-potile pinana ka 'ngoe.

Likoti ho PCB (sheba Setšoantšo sa 4-1) lia hlokahala ho tlosa li-screws tse ntseng li holisa tse koalang mojule oa motlakase o se nang motheo ho siling ea mocheso. Likoti tsena tsa phihlello li tlameha ho ba tse kholo hore hlooho ea screw le li-washer li fete ka bolokolohi, ho lumella mamello e tloaelehileng sebakeng sa lesoba la PCB.

Phapang pakeng tsa tlase ea PCB le mojule oa motlakase o se nang motheo o tlase haholo. Microchip ha e khothaletse ho sebelisa ka likarolo tsa lesoba ka holimo ho module. Ho fokotsa ho fetoha ha molumotages, SMD decoupling capacitor ea li-terminals tsa matla VBUS le 0/VBUS li ka sebelisoa. (Sheba setšoantšo sa 4-1). Netefatsa polokeho ha o ntse o sebetsana le likarolo tse boima joalo ka li-electrolytic kapa polypropylene capacitor, li-transformer, kapa li-inductors tse behiloeng ho potoloha mojule oa matla. Haeba likarolo tsena li le sebakeng se le seng, eketsa li-spacers e le hore boima ba likarolo tsena ka boto bo se ke ba tšoaroa ke mojule oa matla a se nang motheo empa ke li-spacers. Pin out e ka fetoha ho latela tlhophiso. Sheba lethathamo la lihlahisoa bakeng sa sebaka sa pin out. Kopo e 'ngoe le e 'ngoe, PCM, PCB, le ho beoa ha spacers li fapane 'me li tlameha ho hlahlojoa ho latela maemo.

BL1, BL2, le BL3 Kopano ho PCB e le 'ngoe

1. Tlhaloso ea kopano e entsoe ka li-module tse tharo tse se nang motheo tsa matla: Li-module tse peli tsa BL1 tse se nang motheo bakeng sa borokho bo lokisang, BL2 e le 'ngoe, le BL3 e le' ngoe ea motlakase e se nang motheo bakeng sa tlhophiso ea borokho ba mekhahlelo e meraro.

• Kopano bakeng sa phetoho e 'meli ea AC ho mojule oa matla a BL3 ho etsa matrix a ho kopana bakeng sa ho hlahisa matla a lifofane (ho fihlela ho 50 kW).

Qetello

Lethathamo lena la ts'ebeliso le fana ka likhothaletso mabapi le ho hlongoa ha module e se nang motheo. Ho sebelisa litaelo tsena ho tla thusa ho fokotsa khatello ea mochini ho PCB le mojule oa matla a se nang motheo ho netefatsa ts'ebetso ea nako e telele ea sistimi. Litaelo tsa ho kenya sekoting sa mocheso le tsona li tlameha ho lateloa ho fihlela khanyetso e tlase ka ho fetisisa ea mocheso ho tloha ho li-chips tsa matla ho ea ho se phodileng. Ts'ebetso tsena kaofela li bohlokoa ho netefatsa ts'epo e ntle ea sistimi.

Nalane ea Phetoho

Khatiso	Letsatsi	Tlhaloso
A	11/2021	Liphetoho tse latelang li entsoe tokisong ena: E ntlafalitse tokomane ho latela maemo a Microchip. Nomoro ea tokomane e ntlafalitsoe ho DS00004306. Nomoro ea lintlha tsa kopo e ntlafalitsoe ho AN4306.

Microchip Websebaka

Microchip e fana ka tšehetso ea inthaneteng ka rona website at www.microchip.com/. Sena websebaka se sebedisoang ho etsa files le tlhahisoleseding e fumaneha habonolo ho bareki. Tse ling tsa litaba tse fumanehang li kenyelletsa:

• Tšehetso ea Sehlahisoa: Lintlha tsa maqephe le liphoso, lintlha tsa ts'ebeliso le sample mananeo, lisebelisoa tsa moralo, litataiso tsa basebelisi le litokomane tsa tšehetso ea hardware, lintlafatso tsa morao-rao tsa software le li-archived software
• Tšehetso e Akaretsang ea Theknoloji: Lipotso tse atisang ho botsoa (FAQs), likopo tsa tšehetso ea tekheniki, lihlopha tsa lipuisano tsa inthaneteng, lethathamo la litho tsa lenaneo la balekane ba Microchip
• Khoebo ea Microchip: Litataiso tsa ho khetha le ho odara, lingoliloeng tsa morao-rao tsa Microchip, lethathamo la lithupelo le liketsahalo, lethathamo la liofisi tsa thekiso ea Microchip, barekisi le baemeli ba lifeme.

Ts'ebeletso ea Tsebiso ea Phetoho ea Sehlahisoa

Ts'ebeletso ea tsebiso ea phetoho ea sehlahisoa sa Microchip e thusa ho boloka bareki ba le teng ka lihlahisoa tsa Microchip. Ba ngolisitseng ba tla fumana litemoso tsa lengolo-tsoibila neng kapa neng ha ho na le liphetoho, lintlafatso, lintlafatso kapa liphoso tse amanang le sehlahisoa se itseng sa lelapa kapa sesebelisoa sa ntlafatso sa thahasello. Ho ngolisa, ea ho www.microchip.com/pcn le ho latela litaelo tsa ngoliso.

Tšehetso ea Bareki

Basebelisi ba lihlahisoa tsa Microchip ba ka fumana thuso ka likanale tse 'maloa:

• Morekisi kapa Moemedi
• Ofisi ea Thekiso ea Lehae
• Embedded Solutions Engineer (ESE)
• Tšehetso ea tekheniki

Bareki ba lokela ho ikopanya le mofani oa bona oa thepa, moemeli kapa ESE bakeng sa tšehetso. Liofisi tsa thekiso ea lehae le tsona li teng ho thusa bareki. Lethathamo la liofisi tsa thekiso le libaka li kenyelelitsoe tokomaneng ena. Tšehetso ea tekheniki e fumaneha ka ho websebaka ho: www.microchip.com/support

Karolo ea Tšireletso ea Khoutu ea Lisebelisoa tsa Microchip

Ela hloko lintlha tse latelang tsa ts'ireletso ea khoutu lihlahisoa tsa Microchip

• Lihlahisoa tsa Microchip li kopana le litlhaloso tse fumanehang ho Microchip Data Sheet ea bona.
• Microchip e lumela hore lihlahisoa tsa eona li sireletsehile ha li sebelisoa ka mokhoa o reriloeng, ka har'a litlhaloso tsa ts'ebetso, le tlas'a maemo a tloaelehileng.
• E boloka boleng ba Microchip mme ka mabifi e sireletsa litokelo tsa eona tsa thepa ea mahlale. Boiteko ba ho tlola likarolo tsa ts'ireletso ea khoutu ea sehlahisoa sa Microchip bo thibetsoe ka thata 'me bo ka tlola Molao oa Copyright oa Millennium oa Digital.
• Ha ho Microchip kapa moetsi ofe kapa ofe oa semiconductor ea ka netefatsang ts'ireletso ea khoutu ea eona. Tšireletso ea khoutu ha e bolele hore re tiisa hore sehlahisoa "se ke ke sa robeha". Tšireletso ea khoutu e lula e fetoha. Microchip e ikemiselitse ho tsoela pele ho ntlafatsa likarolo tsa ts'ireletso ea khoutu ea lihlahisoa tsa rona.

Tsebiso ea Molao

Khatiso ena le lintlha tse mona li ka sebelisoa feela le lihlahisoa tsa Microchip, ho kenyeletsoa ho rala, ho leka, le ho kopanya lihlahisoa tsa Microchip le kopo ea hau. Tšebeliso ea tlhahisoleseling ena ka tsela efe kapa efe e tlola melaoana ena. Lintlha mabapi le lits'ebetso tsa sesebelisoa li fanoe molemong oa hau feela 'me li ka nkeloa sebaka ke liapdeite. Ke boikarabello ba hau ho netefatsa hore kopo ea hau e kopana le litlhaloso tsa hau. Ikopanye le ofisi ea thekiso ea Microchip ea lehae bakeng sa tšehetso e eketsehileng kapa, fumana tšehetso e eketsehileng ho www.microchip.com/en-us/support/design-help/client-support-services.

TSEBISO ENA E FUMANA KE MICROCHIP "JOALOKAHA E LE". MICROCHIP HA E ETSE LITLHAHISO KAPA LITIISETSO TSA MOFUTA OFE kapa Ofe Ebang E BONAHALA KAPA E BONAHALA, E NGOLOA KAPA MOLOMO, MOLAO KAPA HANG-HANG, E Amanang le tlhahisoleseding e kenyellelitsoeng EMPA E SA LEkanyetsoa HO EFE KAOFELA TIISETSO, TLHOKOMELISO, TLHOKOMELISO, TLHOKOMELISO LE TLHAHISO. MORERO OA RONA, KAPA LITIISETSO E Amanang le MAEMO, BOLEMO, KAPA KETSAHALO EA EONA. HA HO TSAMAYA MICROCHIP E TLA BA MOTHO OA MOLATO BAKENG SA LITABA TSE FEELA, TSE KHETHEHILENG, TSA KOTSI, TSATSAHALO, KAPA TAHLEHELO E LATELANG, TŠENOLO, LITŠEnyehelo, KAPA LITJEHO TSA MOFUTA OO O MANG KAPA O MANG LE LITSEBISO KAPA TŠEBELETSO EA LONA, Leha ho le joalo, HO ETSA HORE NA. TSE KA E KA ETSAHANG KAPA LITOSEKO LI BONAHALA Esale? HO FIHLELA KA BOKGOLO KA HO FETISISA KA MOLAO, BOIKARABELO KAOFELA BA MICROCHIP HO LIKELETSO KAOFELA KA TSELA EFE KAPA E MAHALA LE TSEBISO KAPA TŠEBELETSO EA YONA E KE KE EA FEELA PALO EA LITEFO, HAEBA LI LE TENG, TSEO O LI LEFILENG KA THOHLO HO TSEBA KA MICROCHIP.

Tšebeliso ea lisebelisoa tsa Microchip ts'ehetso ea bophelo le/kapa lits'ebetso tsa ts'ireletso e kotsing ea moreki, 'me moreki o lumela ho sireletsa, ho qosa le ho boloka Microchip e se nang kotsi ho tsoa lits'enyehelo tsohle, likopo, lisutu, kapa litšenyehelo tse bakoang ke ts'ebeliso e joalo. Ha ho lilaesense tse fetisoang, ka mokhoa o hlakileng kapa ka tsela e 'ngoe, tlasa litokelo life kapa life tsa thepa ea mahlale a Microchip ntle le ha ho boletsoe ka tsela e ngoe.

Matšoao a khoebo

Lebitso le logo ea Microchip, logo ea Microchip, Adaptec, AnyRate, AVR, logo ea AVR, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD maXTouch, MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperF , Symmetricom, SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, le XMEGA ke matshwao a kgwebo a ngodisitsweng a Microchip Technology Incorporated USA le dinaheng tse ding. AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed ​​Control, HyperLight Load, IntelliMOS, Libero, motor bench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, logo ea ProASIC Plus, Quiet- Wire , SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, WinPath, le ZL ke matshwao a kgwebo a ngodisitsweng a Microchip Technology Incorporated USA.

Haufi le Key Suppression, AKS, Analog-for-the-Digital Age, AnyCapacitor, AnyIn, AnyOut, Augmented Switching, BlueSky, BodyCom, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average, Dynamic Aveve. , ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Paralleling, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, NVM Express, NVMe, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, REAL ICE Matrix, Q. , Ripple Blocker, RTAX, RTG4, SAMICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Total Endurance, TSHARC, USBCheck, VariSense VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, le ZENA ke matshwao a kgwebo a Microchip Technology Incorporated USA le dinaheng tse ding.

SQTP ke letšoao la ts'ebeletso la Microchip Technology Incorporated USA
Letšoao la Adaptec, Frequency on Demand, Silicon Storage Technology, Symmcom, le Nako e Tšeptjoang ke matšoao a ngolisitsoeng a khoebo a Microchip Technology Inc. linaheng tse ling.
GestIC ke letshwao la kgwebo le ngodisitsweng la Microchip Technology Germany II GmbH & Co. KG, e leng lekala la Microchip Technology Inc., dinaheng tse ding.
Matšoao a mang kaofela a boletsoeng mona ke thepa ea lik'hamphani tse fapaneng.

© 2021, Microchip Technology Incorporated le lithuso tsa eona. Litokelo tsohle li sirelelitsoe.
ISBN: 978-1-5224-9309-9

Tsamaiso ea Tsamaiso ea Boleng

Ho fumana leseli mabapi le Tsamaiso ea Tsamaiso ea Boleng ea Microchip, ka kopo etela www.microchip.com/quality.

Lithekiso le Tšebeletso ea Lefatše Lohle

LIMAKASE	ASIA/PACIFIC	ASIA/PACIFIC	ULAYA
Ofisi ea Khoebo 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Mohala: 480-792-7200 Fax: 480-792-7277 Tšehetso ea tekheniki: www.microchip.com/support Web Aterese: www.microchip.com Atlanta Duluth, GA Mohala: 678-957-9614 Fax: 678-957-1455 Austin, TX Mohala: 512-257-3370 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Mohala: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Mohala: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Mohala: 248-848-4000 Houston, TX Mohala: 281-894-5983 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Mohala: 317-536-2380 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Mohala: 951-273-7800 Raleigh, NC Mohala: 919-844-7510 New York, NY Mohala: 631-435-6000 San Jose, CA Mohala: 408-735-9110 Mohala: 408-436-4270 Canada - Toronto Mohala: 905-695-1980 Fax: 905-695-2078	Australia - Sydney Mohala: 61-2-9868-6733 China - Beijing Mohala: 86-10-8569-7000 China - Chengdu Mohala: 86-28-8665-5511 China - Chongqing Mohala: 86-23-8980-9588 China - Dongguan Mohala: 86-769-8702-9880 China - Guangzhou Mohala: 86-20-8755-8029 China - Hangzhou Mohala: 86-571-8792-8115 China - Hong Kong SAR Mohala: 852-2943-5100 China - Nanjing Mohala: 86-25-8473-2460 China - Qingdao Mohala: 86-532-8502-7355 China - Shanghai Mohala: 86-21-3326-8000 China - Shenyang Mohala: 86-24-2334-2829 China - Shenzhen Mohala: 86-755-8864-2200 China - Suzhou Mohala: 86-186-6233-1526 China - Wuhan Mohala: 86-27-5980-5300 China - Xian Mohala: 86-29-8833-7252 China - Xiamen Mohala: 86-592-2388138 China - Zhuhai Mohala: 86-756-3210040	India - Bangalore Mohala: 91-80-3090-4444 India - New Delhi Mohala: 91-11-4160-8631 India - Pune Mohala: 91-20-4121-0141 Japane - Osaka Mohala: 81-6-6152-7160 Japane - Tokyo Mohala: 81-3-6880-3770 Korea - Daegu Mohala: 82-53-744-4301 Korea - Seoul Mohala: 82-2-554-7200 Malaysia - Kuala Lumpur Mohala: 60-3-7651-7906 Malaysia - Penang Mohala: 60-4-227-8870 Philippines - Manila Mohala: 63-2-634-9065 Singapore Mohala: 65-6334-8870 Taiwan - Hsin Chu Mohala: 886-3-577-8366 Taiwan - Kaohsiung Mohala: 886-7-213-7830 Taiwan - Taipei Mohala: 886-2-2508-8600 Thailand - Bangkok Mohala: 66-2-694-1351 Vietnam - Ho Chi Minh Mohala: 84-28-5448-2100	Austria - Wels Mohala: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Mohala: 45-4485-5910 Fax: 45-4485-2829 Finland - Espoo Mohala: 358-9-4520-820 Fora - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Jeremane - Ho khabisa Mohala: 49-8931-9700 Jeremane - Haan Mohala: 49-2129-3766400 Jeremane - Heilbronn Mohala: 49-7131-72400 Jeremane - Karlsruhe Mohala: 49-721-625370 Jeremane - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Jeremane - Rosenheim Mohala: 49-8031-354-560 Iseraele - Ra'anana Mohala: 972-9-744-7705 Italy - Milan Mohala: 39-0331-742611 Fax: 39-0331-466781 Italy - Padova Mohala: 39-049-7625286 Netherlands - Drunen Mohala: 31-416-690399 Fax: 31-416-690340 Norway - Trondheim Mohala: 47-72884388 Poland - Warsaw Mohala: 48-22-3325737 Romania - Bucharest Tel: 40-21-407-87-50 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Gothenberg Tel: 46-31-704-60-40 Sweden - Stockholm Mohala: 46-8-5090-4654 UK - Wokingham Mohala: 44-118-921-5800 Fax: 44-118-921-5820

© 2021 Microchip Technology Inc. le makalana a eona.
DS00004306A

Litokomane / Lisebelisoa

MICROCHIP AN4306 Taelo ea ho Hloma bakeng sa Mojule oa Motlakase o se Nang [pdf] Bukana ea Mosebelisi AN4306 Mounting Taelo bakeng sa Baseless Power Module, AN4306, Taelo ea ho Homa bakeng sa Module oa Matla a se nang MotheoBaseless Power Module

Litšupiso

• Bukana ea Mosebelisi