OBS Plugin ati Dockable Adarí
“
ọja Alaye
Awọn pato
- Awọn ibeere eto: Windows 7 / 10, Mac 10.13
tabi loke - Awọn ibeere Software: OBS-Studio 25.08 or
loke
Awọn ilana Lilo ọja
Chapter 2: Install OBS Plugin & Dockable Controller
2.1 Install with Windows 7 / 10
- Download OBS-Studio software and install it on your
kọmputa. - Download OBS Plugin & Dockable Controller software from the
Lumens webojula. - Jade awọn gbaa lati ayelujara file and run [ OBS Plugin and Dockable
Controller.exe ] to start the installation. - Follow the on-screen instructions provided by the installation
oluṣeto. - Once installation is complete, click [ Finish ].
2.2 Install with Mac
- Ṣe igbasilẹ sọfitiwia OBS-Studio ki o fi sii sori Mac rẹ.
- Download OBS Plugin & Dockable Controller software from the
Lumens webojula. - Click [ OBS Plugin and Dockable Controller.pkg ] to
fi sori ẹrọ.
Chapter 3: Start Using
3.1 Jẹrisi Eto Nẹtiwọọki
To ensure the computer is on the same network segment as the
camera, follow the setup below:
- Kamẹra
- àjọlò Cable
- Yipada tabi olulana
- Kọmputa
3.2 Set video source from OBS-Studio
- Open OBS Studio software.
- Add a video source by clicking +.
- Select [VLC Video Source].
- Name the video source and click [ OK ].
- In the Properties page, click + then select [ Add Path/URL
]. - Enter the RTSP stream URL and click [ OK ].
Awọn Ibeere Nigbagbogbo (FAQ)
Q: What are the system requirements for using the OBS Plugin
& Dockable Controller?
A: The system requirements are Windows 7/10 or
Mac 10.13 or above. Additionally, OBS-Studio version 25.08 or above
o ni lati fi si.
Q: How do I install the software on a Windows PC?
A: To install on Windows, download OBS-Studio
software and the OBS Plugin & Dockable Controller software from
the Lumens webojula. Ṣiṣe fifi sori ẹrọ file ki o si tẹle awọn
on-screen instructions provided by the wizard.
Q: How can I set the video source from OBS-Studio?
A: To set the video source, open OBS Studio,
add a video source, select VLC Video Source, name the source, add
the RTSP stream URL in the Properties page, and click OK to
jẹrisi.
“`
OBS Plugin & Dockable Controller User Manual – English
Atọka akoonu
Chapter 1 System Requirements …………………………………………………… 2
1.1 System Requirements ……………………………………………………………………..2 1.2 Software Requirement ……………………………………………………………………..2
Chapter 2 Install OBS Plugin & Dockable Controller ………………………. 3
2.1 Install with Windows 7 / 10 ……………………………………………………………………….3 2.2 Install with Mac …………………………………………………………………………………………3
Chapter 3 Start Using …………………………………………………………………… 4
3.1 Confirm Network Setting………………………………………………………………………………… 4 3.2 Set video source from OBS-Studio ………………………………………………………………. 4 3.3 How to use Lumens OBS Plugin to control camera ……………………………………. 8 3.4 How to use Lumens OBS Dockable to control camera …………………………….. 11
Chapter 4 Operation Interface Description …………………………………… 15
4.1 OBS Plugin ……………………………………………………………………………………………………. 15 4.2 OBS Dockable ………………………………………………………………………………………………. 20
Copyright Information…………………………………………………………………… 22
1
Chapter 1 System Awọn ibeere
1.1 System Awọn ibeere
Windows 7 / 10 Mac 10.13 or above
1.2 Software ibeere
OSB-Studio 25.08 tabi loke
2
Chapter 2 Install OBS Plugin & Dockable Controller
2.1 Install with Windows 7 / 10
1. Please download OBS-Studio software and install it on your computer.
Please download OBS Plugin & Dockable Controller software from the Lumens webojula.
2. Jade awọn file downloaded and then click [ OBS Plugin and Dockable Controller.exe ] to install.
The installation wizard will guide you through the process. Please follow the on-screen instructions for the next step.
When the installation is completed, press [ Finish ] to end the installation.
2.2 Install with Mac
1. Please download OBS-Studio software and install it on your Mac. 2. Please download OBS Plugin & Dockable Controller software from the Lumens
website. 3. Click [ OBS Plugin and Dockable Controller.pkg ] to install.
3
Chapter 3 Bẹrẹ Lilo
3.1 Jẹrisi Eto Nẹtiwọọki
To confirm the computer is on the same network segment as the camera.
Kamẹra
àjọlò Cable
Yipada tabi olulana
Kọmputa
3.2 Set video source from OBS-Studio
1. Click [ OBS Studio ] icon to open the software.
4
2. Click “+” to add a video source. 3. Select [VLC Video Source].
5
4. Give a name to the video source and click [ OK ]. 5. In Properties page, select “+” then select [ Add Path/URL ].
6
6. Key in the RTSP stream URL then click [ OK ].
RTSP connection address formats are as follows: RTSP Main Streaming (4K@H.265)=> rtsp://camera IP:8554/hevc RTSP Sub1 Streaming (1080P@H.264)=> rtsp://camera IP:8557/h264 RTSP Sub2 Streaming (720P@H.264)=> rtsp://camera IP:8556/h264
7. Select RTSP URL on the Playlist then click [ OK ].
7
8. The stream will be displayed on the OBS-Studio.
3.3 How to use Lumens OBS Plugin to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Select [ Tools ] => [ Lumens OBS Plugin ]
8
2. Lumens OBS Plugin window will be displayed. 3. Select [ Settings ] => [ Camera Assign] 9
Press [ Search ] to find IP cameras from the same network. Select a Camera you would like to control from IP Camera List. Select the Camera No. You can change the Camera name. Click [ Apply ] and close Camera Assign window.
3
4
5 1
2
4. Select set Camera from Select Camera tab, Camera Control setting will be enable. Now you can control the camera via Lumens OBS plugin.
10
3.4 How to use Lumens OBS Dockable to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Yan [ View ] => [ Docks ] => [ Custom Browser Docks… ]
2. Custom Browser Docks window will be displayed.
11
3. Enter the Dock Name & URL Dock NameGive a name to the customized dock. URL: Copy the installed link dock sample and paste it to the field.
Fun awọn URL information, please find the installed folder of Dockable Controller. Normally the folder would be following path:
C: Eto Filesobs-studioLumensOBSPluginDockable Controller The part circled in the red box below is the dock samples.
4. Open the dock sample by browser and copy the URL.
12
5. Fill in the DockName, paste avove URL to custom browser docks window and then click [ Apply ].
6. Customized dock window will be displayed and you can merge it with OBS-Studio software.
13
7. Click [ PERFEREMCES ] to key in the IP address of the camera you would like to control and click [ Connect ].
8. After connecting, a pops windows will show the camera is connected. 9. Now you can use Lumens dockable to control the IP camera.
14
Chapter 4 isẹ Interface Apejuwe
4.1 OBS Plugin
4.1.1 Akọkọ
1
2
3
4
6
5
7
8
Rara
Nkan
1 Eto
2 View
3 Iranlọwọ
4
Yan Kamẹra
Awọn apejuwe iṣẹ
Settings options: Camera assign: Enter the camera setting. Please refer to 4.1.2
Settings-Camera Assign Use HotKeys: When checked, prompt window will pop up: Need to set HotKeys
in OBS.
O le tẹ [File]=>[Setting]=>[HotKeys] on OBS-studio to set. PanTilt limit: Enter PanTilt limit setting. Please refer to 4.1.3 Settings- PanTilt
limit Preset rename: Enter Preset rename setting. Please refer to 4.1.4 Settings-
Preset rename Close: Close Lumens OBS Plugin.
View options: Simple mode Advance mode: please refer to 4.1.5 View- Advance mode
Show about us information.
Select the camera number you want to control. Need to set from [ Settings ] => [ Camera assign ] first.
15
If the connection fails, a message window will pop up.
5 Ipin sisun
Adjust the zoom-in or zoom-out ratio via the slider bar.
6
Eto pan / tẹ
7 Idojukọ
Adjust the Pan/Tilt position of the camera screen.
Select MF(manual) / AF(automatic) focus. The focusing range is adjustable when the focus mode is set to “Manual”.
8 Preset setting Select the number first and then select [ STORE ] or [ CALL ].
4.1.2 Settings-Camera Assign
1
2
3
4
6
5
Rara
Nkan
Awọn apejuwe iṣẹ
1 IP adirẹsi
You can apply the IP of the IP Camera list or manually enter the IP.
2 Camera No.
Select Camera 1~8
3 Orukọ Kamẹra
Manually edit the camera name.
4 Waye
Click to apply settings.
5 Wa
Click to search for Lumens PTZ Camera, click in the IP Camera list and IP will fill in the IP Address box.
6 IP Camera List
List the searched Camera IP and Camera ID after click search button.
<Remark>Lumens OBS plug-in CANNOT auto-discover Lumens NDI cameras. Please manually add Lumens NDI models via IP address.
16
4.1.3 Settings- PanTilt limit
1 2
3
Rara
Nkan
1 PanTilt limit
2 PanTilt limit setting
3 PTZ Speed Comp
Awọn apejuwe iṣẹ
Switch button to enable/disable PanTilt limit setting.
Set PanTilt limit position. Switch button to enable/disable the Pan/Tilt speed vary with the position of the Zoom. <Caution> Don’t support VC-A50P and VC-BC series.
4.1.4 Settings- Preset rename
Awọn apejuwe
You can edit the Preset name and click [ Apply ] to save settings.
17
4.1.5 View- Advance mode
1
2
3 4
Rara
Nkan
1 PTZF Speed
2 Ifihan
3 Iwontunws.funfun
Awọn apejuwe iṣẹ
Adjust the moving speed of Pan/Tilt/Zoom/Focus/Preset. Exposure Mode: Select exposure mode (Auto/Manual) Shutter speed: The shutter speed is adjustable when the exposure mode
is set to “Manual”. Iris: The size of aperture is adjustable when the exposure mode is set to
“Manual”. Gain: The gain limit is adjustable when the exposure mode is set to
“Manual”. Scene Mode: Select Scene mode(Low Light/Indoor/Backlight/Motion)
Ipo iwoye
Shutter speed Iris Gain
1/30(1/25) 1/60(1/50)
F2.0
F3.2
33dB
24dB
1/120 F4.5 21dB
<Remark>VC-A50P does not support Gain
White Balance Mode: Select the White Balance mode.
Aifọwọyi (4000K ~ 7000K)
Ninu ile (3200K)
Outdoor (5800K)
1/180 F3.2 27dB
18
4 Aworan
One Push Manual (R Gain +/- ; B Gain +/- ) R/B Gain: Manually adjust blue/red gain value. One Push: One push WB will be trigger when the white balance mode is set to “One Push”. Image Mode: Select the Image mode (Default/Custom) When the image mode is set to Custom, following items can be adjusted Sharpness: Adjust the sharpness of the image. Saturation: Saturation adjustment of the image. Hue: Adjust the hue. Gamma: Gamma Level adjustment. Dig-Effect: Set the mode at which the image is turned. (OFF/MIRROR/FLIP/MIRROR+FLIP)
19
4.2 OBS Dockable
4.2.1 Control window
2 4
1 3
7
Rara
Nkan
1 Orukọ Kamẹra
5
6
Awọn apejuwe iṣẹ
Show the camera name you are controlling. Move the camera into the position you want and click the preset button you want to assign.
2 ASSIGN PRESETS
3 PREFERENCES 4 Preset Controller 5 Zoom 6 Focus 7 Pan/Tilt/Home
Please refer to 4.2.2 PREFERENCES Press the button to execute Preset Recall. Adjust the zoom-in or zoom-out. Adjust the focus range. Adjust the Pan/Tilt/Home position of the camera screen.
20
4.2.2 PERFERENCES
1 2 3 4
5
Rara
Nkan
1 IP adirẹsi
2 Orukọ Kamẹra
3 Eto awọn bọtini
4 Speed 5 Initial Position
Awọn apejuwe iṣẹ
Enter the IP address the Camera and click [Connect] button.
Modify the camera name. (Default: Camera01) Camera names are limited to 1 – 12 characters. Please use a camera name by mixing uppercase and lowercase letters or numbers. Do not use “/” and “space” or special symbols. Press buttons to switch the mode. Mirror- On/Off Filp- On/Off Motionless Preser- On/Off Focus- Manual/Auto Adjust the moving speed of Pan/Tilt/Zoom/Focus. Select the initial position. ( Last MEM / 1st Preset)
21
Aṣẹ-lori Alaye
Awọn ẹtọ lori ara © Lumens Digital Optics Inc. Gbogbo ẹtọ wa ni ipamọ. Lumens jẹ aami-iṣowo ti o forukọsilẹ lọwọlọwọ nipasẹ Lumens Digital Optics Inc. file ko gba laaye ti iwe-aṣẹ ko ba pese nipasẹ Lumens Digital Optics Inc. ayafi ti didakọ eyi file jẹ fun idi ti afẹyinti lẹhin rira ọja yii. Lati le ni ilọsiwaju ọja naa, alaye ni eyi file jẹ koko ọrọ si ayipada lai saju akiyesi. Lati ṣe alaye ni kikun tabi ṣapejuwe bi o ṣe yẹ ki ọja yii lo, iwe afọwọkọ yii le tọka si awọn orukọ awọn ọja miiran tabi awọn ile-iṣẹ laisi aniyan eyikeyi irufin. AlAIgBA ti awọn atilẹyin ọja: Lumens Digital Optics Inc. ko ṣe iduro fun eyikeyi imọ-ẹrọ ti o ṣeeṣe, awọn aṣiṣe olootu tabi awọn aiṣedeede, tabi iduro fun eyikeyi isẹlẹ tabi awọn ibajẹ ti o jọmọ ti o dide lati pese eyi file, lilo, tabi ṣiṣẹ ọja yi.
22
Awọn iwe aṣẹ / Awọn orisun
 |
Lumens OBS Plugin and Dockable Controller [pdf] Afowoyi olumulo OBS Plugin and Dockable Controller, Plugin and Dockable Controller, Dockable Controller, Controller |