ສະກັດການດາວໂຫຼດ file and run [ OBS Plugin and Dockable
Controller.exe ] to start the installation.
Follow the on-screen instructions provided by the installation
ຕົວຊ່ວຍສ້າງ.

Once installation is complete, click [ Finish ].

2.2 Install with Mac

ດາວໂຫລດຊອບແວ OBS-Studio ແລະຕິດຕັ້ງມັນຢູ່ໃນ Mac ຂອງທ່ານ.

Download OBS Plugin & Dockable Controller software from the
Lumens webເວັບໄຊ.
Click [ OBS Plugin and Dockable Controller.pkg ] to
ຕິດຕັ້ງ.

Chapter 3: Start Using

3.1 ຢືນຢັນການຕັ້ງຄ່າເຄືອຂ່າຍ

To ensure the computer is on the same network segment as the
camera, follow the setup below:

ກ້ອງຖ່າຍຮູບ

ສາຍອີເທີເນັດ
ສະຫຼັບຫຼື Router

ຄອມພິວເຕີ

3.2 Set video source from OBS-Studio

Open OBS Studio software.

Add a video source by clicking +.
Select [VLC Video Source].

Name the video source and click [ OK ].
In the Properties page, click + then select [ Add Path/URL
].

Enter the RTSP stream URL and click [ OK ].

ຄຳຖາມທີ່ຖາມເລື້ອຍໆ (FAQ)

Q: What are the system requirements for using the OBS Plugin
& Dockable Controller?

A: The system requirements are Windows 7/10 or
Mac 10.13 or above. Additionally, OBS-Studio version 25.08 or above
ແມ່ນຕ້ອງການ.

Q: How do I install the software on a Windows PC?

A: To install on Windows, download OBS-Studio
software and the OBS Plugin & Dockable Controller software from
the Lumens webເວັບໄຊ. ດໍາເນີນການຕິດຕັ້ງ file ແລະປະຕິບັດຕາມ
on-screen instructions provided by the wizard.

Q: How can I set the video source from OBS-Studio?

A: To set the video source, open OBS Studio,
add a video source, select VLC Video Source, name the source, add
the RTSP stream URL in the Properties page, and click OK to
ຢືນຢັນ.

“`

View Fullscreen

OBS Plugin & Dockable Controller User Manual – English

ສາລະບານ
Chapter 1 System Requirements …………………………………………………… 2
1.1 System Requirements ……………………………………………………………………..2 1.2 Software Requirement ……………………………………………………………………..2
Chapter 2 Install OBS Plugin & Dockable Controller ………………………. 3
2.1 Install with Windows 7 / 10 ……………………………………………………………………….3 2.2 Install with Mac …………………………………………………………………………………………3
Chapter 3 Start Using …………………………………………………………………… 4
3.1 Confirm Network Setting………………………………………………………………………………… 4 3.2 Set video source from OBS-Studio ………………………………………………………………. 4 3.3 How to use Lumens OBS Plugin to control camera ……………………………………. 8 3.4 How to use Lumens OBS Dockable to control camera …………………………….. 11
Chapter 4 Operation Interface Description …………………………………… 15
4.1 OBS Plugin ……………………………………………………………………………………………………. 15 4.2 OBS Dockable ………………………………………………………………………………………………. 20
Copyright Information…………………………………………………………………… 22
1

ບົດທີ 1 ຄວາມຕ້ອງການຂອງລະບົບ
1.1 ຄວາມຕ້ອງການລະບົບ
Windows 7 / 10 Mac 10.13 or above
1.2 ຄວາມຕ້ອງການຊອບແວ
OSB-Studio 25.08 ຫຼືສູງກວ່າ
2

Chapter 2 Install OBS Plugin & Dockable Controller
2.1 Install with Windows 7 / 10
1. Please download OBS-Studio software and install it on your computer.
Please download OBS Plugin & Dockable Controller software from the Lumens webເວັບໄຊ.
2. ສະກັດ file downloaded and then click [ OBS Plugin and Dockable Controller.exe ] to install.
The installation wizard will guide you through the process. Please follow the on-screen instructions for the next step.
When the installation is completed, press [ Finish ] to end the installation.
2.2 Install with Mac
1. Please download OBS-Studio software and install it on your Mac. 2. Please download OBS Plugin & Dockable Controller software from the Lumens
website. 3. Click [ OBS Plugin and Dockable Controller.pkg ] to install.
3

ບົດທີ 3 ເລີ່ມຕົ້ນການນໍາໃຊ້
3.1 ຢືນຢັນການຕັ້ງຄ່າເຄືອຂ່າຍ
To confirm the computer is on the same network segment as the camera.

ກ້ອງຖ່າຍຮູບ

ສາຍອີເທີເນັດ
ສະຫຼັບຫຼື Router

ຄອມພິວເຕີ

3.2 Set video source from OBS-Studio
1. Click [ OBS Studio ] icon to open the software.

2. Click “+” to add a video source. 3. Select [VLC Video Source].
5

4. Give a name to the video source and click [ OK ]. 5. In Properties page, select “+” then select [ Add Path/URL ].
6

6. Key in the RTSP stream URL then click [ OK ].
RTSP connection address formats are as follows: RTSP Main Streaming (4K@H.265)=> rtsp://camera IP:8554/hevc RTSP Sub1 Streaming (1080P@H.264)=> rtsp://camera IP:8557/h264 RTSP Sub2 Streaming (720P@H.264)=> rtsp://camera IP:8556/h264
7. Select RTSP URL on the Playlist then click [ OK ].
7

8. The stream will be displayed on the OBS-Studio.
3.3 How to use Lumens OBS Plugin to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Select [ Tools ] => [ Lumens OBS Plugin ] 8

2. Lumens OBS Plugin window will be displayed. 3. Select [ Settings ] => [ Camera Assign] 9

Press [ Search ] to find IP cameras from the same network. Select a Camera you would like to control from IP Camera List. Select the Camera No. You can change the Camera name. Click [ Apply ] and close Camera Assign window.

5 1

2
4. Select set Camera from Select Camera tab, Camera Control setting will be enable. Now you can control the camera via Lumens OBS plugin.

3.4 How to use Lumens OBS Dockable to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. ເລືອກ [ View ] => [ Docks ] => [ Custom Browser Docks… ] 2. Custom Browser Docks window will be displayed.
11

3. Enter the Dock Name & URL Dock NameGive a name to the customized dock. URL: Copy the installed link dock sample and paste it to the field.
ສໍາລັບ URL information, please find the installed folder of Dockable Controller. Normally the folder would be following path:
C: ໂຄງການ Filesobs-studioLumensOBSPluginDockable Controller The part circled in the red box below is the dock samples.
4. Open the dock sample by browser and copy the URL.
12

5. Fill in the DockName, paste avove URL to custom browser docks window and then click [ Apply ].
6. Customized dock window will be displayed and you can merge it with OBS-Studio software.
13

7. Click [ PERFEREMCES ] to key in the IP address of the camera you would like to control and click [ Connect ].
8. After connecting, a pops windows will show the camera is connected. 9. Now you can use Lumens dockable to control the IP camera.
14

ບົດທີ 4 ລາຍລະອຽດຂອງການໂຕ້ຕອບການດໍາເນີນງານ
4.1 OBS Plugin
ຫຼັກ 4.1.1

ບໍ່

ລາຍການ

1 ການຕັ້ງຄ່າ

2 View

3 ຊ່ວຍເຫຼືອ

ເລືອກກ້ອງຖ່າຍຮູບ

ຄໍາອະທິບາຍຟັງຊັນ
Settings options: Camera assign: Enter the camera setting. Please refer to 4.1.2
Settings-Camera Assign Use HotKeys: When checked, prompt window will pop up: Need to set HotKeys
in OBS.
ທ່ານສາມາດຄລິກໃສ່ [File]=>[Setting]=>[HotKeys] on OBS-studio to set. PanTilt limit: Enter PanTilt limit setting. Please refer to 4.1.3 Settings- PanTilt
limit Preset rename: Enter Preset rename setting. Please refer to 4.1.4 Settings-
Preset rename Close: Close Lumens OBS Plugin.
View options: Simple mode Advance mode: please refer to 4.1.5 View- Advance mode
Show about us information.
Select the camera number you want to control. Need to set from [ Settings ] => [ Camera assign ] first.
15

If the connection fails, a message window will pop up.

5 ອັດຕາສ່ວນຊູມ

Adjust the zoom-in or zoom-out ratio via the slider bar.

ການຕັ້ງຄ່າ Pan / Tilt

7 ຈຸດສຸມ

Adjust the Pan/Tilt position of the camera screen.
Select MF(manual) / AF(automatic) focus. The focusing range is adjustable when the focus mode is set to “Manual”.

8 Preset setting Select the number first and then select [ STORE ] or [ CALL ].

4.1.2 Settings-Camera Assign

ບໍ່

ລາຍການ

ຄໍາອະທິບາຍຟັງຊັນ

1 ທີ່ຢູ່ IP

You can apply the IP of the IP Camera list or manually enter the IP.

2 Camera No.

Select Camera 1~8

3 ຊື່ກ້ອງ

Manually edit the camera name.

4 ສະຫມັກ

Click to apply settings.

5 ຊອກຫາ

Click to search for Lumens PTZ Camera, click in the IP Camera list and IP will fill in the IP Address box.

6 IP Camera List

List the searched Camera IP and Camera ID after click search button.

<Remark>Lumens OBS plug-in CANNOT auto-discover Lumens NDI cameras. Please manually add Lumens NDI models via IP address.

4.1.3 Settings- PanTilt limit

1 2

ບໍ່

ລາຍການ

1 PanTilt limit

2 PanTilt limit setting

3 PTZ Speed Comp

ຄໍາອະທິບາຍຟັງຊັນ
Switch button to enable/disable PanTilt limit setting.
Set PanTilt limit position. Switch button to enable/disable the Pan/Tilt speed vary with the position of the Zoom. <Caution> Don’t support VC-A50P and VC-BC series.

4.1.4 Settings- Preset rename

ລາຍລະອຽດ
You can edit the Preset name and click [ Apply ] to save settings.
17

4.1.5 View- Advance mode
1
2

3 4

ບໍ່

ລາຍການ

1 PTZF Speed

2 ການເປີດເຜີຍ

3 ສົມດຸນສີຂາວ

ຄໍາອະທິບາຍຟັງຊັນ
Adjust the moving speed of Pan/Tilt/Zoom/Focus/Preset. Exposure Mode: Select exposure mode (Auto/Manual) Shutter speed: The shutter speed is adjustable when the exposure mode
is set to “Manual”. Iris: The size of aperture is adjustable when the exposure mode is set to
“Manual”. Gain: The gain limit is adjustable when the exposure mode is set to
“Manual”. Scene Mode: Select Scene mode(Low Light/Indoor/Backlight/Motion)

ໂໝດສາກ

Shutter speed Iris Gain

1/30(1/25) 1/60(1/50)

F2.0

F3.2

33dB

24dB

1/120 F4.5 21dB

<Remark>VC-A50P does not support Gain

White Balance Mode: Select the White Balance mode.

ອັດຕະໂນມັດ (4000K ~ 7000K)

ໃນອາຄານ (3200K)

Outdoor (5800K)

1/180 F3.2 27dB

4 ຮູບພາບ

One Push Manual (R Gain +/- ; B Gain +/- ) R/B Gain: Manually adjust blue/red gain value. One Push: One push WB will be trigger when the white balance mode is set to “One Push”. Image Mode: Select the Image mode (Default/Custom) When the image mode is set to Custom, following items can be adjusted Sharpness: Adjust the sharpness of the image. Saturation: Saturation adjustment of the image. Hue: Adjust the hue. Gamma: Gamma Level adjustment. Dig-Effect: Set the mode at which the image is turned. (OFF/MIRROR/FLIP/MIRROR+FLIP)

4.2 OBS Dockable
4.2.1 Control window
2 4

1 3

ບໍ່

ລາຍການ

1 ຊື່ກ້ອງ

ຄໍາອະທິບາຍຟັງຊັນ
Show the camera name you are controlling. Move the camera into the position you want and click the preset button you want to assign.

2 ASSIGN PRESETS

3 PREFERENCES 4 Preset Controller 5 Zoom 6 Focus 7 Pan/Tilt/Home

Please refer to 4.2.2 PREFERENCES Press the button to execute Preset Recall. Adjust the zoom-in or zoom-out. Adjust the focus range. Adjust the Pan/Tilt/Home position of the camera screen.

4.2.2 PERFERENCES
1 2 3 4
5

ບໍ່

ລາຍການ

1 ທີ່ຢູ່ IP

2 ຊື່ກ້ອງ

3 ປຸ່ມການຕັ້ງຄ່າ
4 Speed 5 Initial Position

ຄໍາອະທິບາຍຟັງຊັນ
Enter the IP address the Camera and click [Connect] button.
Modify the camera name. (Default: Camera01) Camera names are limited to 1 – 12 characters. Please use a camera name by mixing uppercase and lowercase letters or numbers. Do not use “/” and “space” or special symbols. Press buttons to switch the mode. Mirror- On/Off Filp- On/Off Motionless Preser- On/Off Focus- Manual/Auto Adjust the moving speed of Pan/Tilt/Zoom/Focus. Select the initial position. ( Last MEM / 1st Preset)

ຂໍ້ມູນລິຂະສິດ
ລິຂະສິດ © Lumens Digital Optics Inc. ສະຫງວນລິຂະສິດທັງໝົດ. Lumens ເປັນເຄື່ອງໝາຍການຄ້າທີ່ກຳລັງຖືກລົງທະບຽນໂດຍ Lumens Digital Optics Inc. ສຳເນົາ, ຜະລິດຄືນໃໝ່ ຫຼື ສົ່ງຂໍ້ມູນນີ້. file ບໍ່ໄດ້ຮັບອະນຸຍາດ ຖ້າໃບອະນຸຍາດບໍ່ໄດ້ສະໜອງໃຫ້ໂດຍ Lumens Digital Optics Inc. ເວັ້ນເສຍແຕ່ຈະສຳເນົາອັນນີ້ file ແມ່ນສໍາລັບຈຸດປະສົງຂອງການສໍາຮອງຂໍ້ມູນຫຼັງຈາກການຊື້ຜະລິດຕະພັນນີ້. ເພື່ອຮັກສາການປັບປຸງຜະລິດຕະພັນ, ຂໍ້ມູນໃນນີ້ file ມີການປ່ຽນແປງໂດຍບໍ່ມີການແຈ້ງລ່ວງໜ້າ. ເພື່ອອະທິບາຍຢ່າງເຕັມສ່ວນຫຼືອະທິບາຍວິທີການນໍາໃຊ້ຜະລິດຕະພັນນີ້, ຄູ່ມືນີ້ອາດຈະອ້າງເຖິງຊື່ຂອງຜະລິດຕະພັນຫຼືບໍລິສັດອື່ນໆໂດຍບໍ່ມີການຕັ້ງໃຈທີ່ຈະລະເມີດໃດໆ. ການປະຕິເສດການຮັບປະກັນ: Lumens Digital Optics Inc. ແມ່ນບໍ່ຮັບຜິດຊອບຕໍ່ຄວາມຜິດພາດທາງເທັກໂນໂລຍີ, ບັນນາທິການ ຫຼືການລະເວັ້ນໃດໆ, ຫຼືຮັບຜິດຊອບຕໍ່ຄວາມເສຍຫາຍທີ່ເປັນເຫດ ຫຼື ທີ່ກ່ຽວຂ້ອງທີ່ເກີດຈາກການສະໜອງຂໍ້ມູນນີ້. file, ການນໍາໃຊ້, ຫຼືປະຕິບັດຜະລິດຕະພັນນີ້.
22

ເອກະສານ / ຊັບພະຍາກອນ

Lumens OBS Plugin and Dockable Controller [pdf] ຄູ່ມືຜູ້ໃຊ້
OBS Plugin and Dockable Controller, Plugin and Dockable Controller, Dockable Controller, Controller

ເອກະສານອ້າງອີງ

ຄູ່ມືຜູ້ໃຊ້

Lumens OBS Plugin ແລະ Dockable Controller ຄູ່ມືຜູ້ໃຊ້

OBS Plugin ແລະ Dockable Controller

ຂໍ້ມູນຜະລິດຕະພັນ

ຂໍ້ມູນຈໍາເພາະ

ຄໍາແນະນໍາການນໍາໃຊ້ຜະລິດຕະພັນ

Chapter 2: Install OBS Plugin & Dockable Controller

2.1 Install with Windows 7 / 10

2.2 Install with Mac

Chapter 3: Start Using

3.1 ຢືນຢັນການຕັ້ງຄ່າເຄືອຂ່າຍ

3.2 Set video source from OBS-Studio

ຄຳຖາມທີ່ຖາມເລື້ອຍໆ (FAQ)

Q: What are the system requirements for using the OBS Plugin
& Dockable Controller?

Q: How do I install the software on a Windows PC?

Q: How can I set the video source from OBS-Studio?

ເອກະສານ / ຊັບພະຍາກອນ

ເອກະສານອ້າງອີງ

ອອກຄໍາເຫັນ

ຍົກເລີກການຕອບ