OBS Plugin ndi Dockable Controller

“

Zambiri Zamalonda

Zofotokozera

• Zofunikira pa System: Windows 7 / 10, Mac 10.13
  kapena pamwamba
• Zofunikira papulogalamu: OBS-Studio 25.08 or
  pamwamba

Malangizo Ogwiritsira Ntchito Zogulitsa

Chapter 2: Install OBS Plugin & Dockable Controller

2.1 Install with Windows 7 / 10

1. Tsitsani pulogalamu ya OBS-Studio ndikuyiyika patsamba lanu
   kompyuta.
2. Download OBS Plugin & Dockable Controller software from the
   Lumens webmalo.
3. Chotsani zomwe zidatsitsidwa file and run [ OBS Plugin and Dockable
   Controller.exe ] to start the installation.
4. Follow the on-screen instructions provided by the installation
   mfiti.
5. Once installation is complete, click [ Finish ].

2.2 Kukhazikitsa ndi Mac

1. Tsitsani pulogalamu ya OBS-Studio ndikuyiyika pa Mac yanu.
2. Download OBS Plugin & Dockable Controller software from the
   Lumens webmalo.
3. Click [ OBS Plugin and Dockable Controller.pkg ] to
   kukhazikitsa.

Chapter 3: Start Using

3.1 Tsimikizirani Kukhazikitsa Kwa Netiweki

To ensure the computer is on the same network segment as the
camera, follow the setup below:

• Kamera
• Ethernet Cable
• Sinthani kapena rauta
• Kompyuta

3.2 Set video source from OBS-Studio

1. Open OBS Studio software.
2. Add a video source by clicking +.
3. Select [VLC Video Source].
4. Name the video source and click [ OK ].
5. In the Properties page, click + then select [ Add Path/URL
   ].
6. Enter the RTSP stream URL and click [ OK ].

Mafunso Ofunsidwa Kawirikawiri (FAQ)

Q: What are the system requirements for using the OBS Plugin
& Dockable Controller?

A: The system requirements are Windows 7/10 or
Mac 10.13 or above. Additionally, OBS-Studio version 25.08 or above
chofunika.

Q: How do I install the software on a Windows PC?

A: To install on Windows, download OBS-Studio
software and the OBS Plugin & Dockable Controller software from
the Lumens webmalo. Kuthamanga unsembe file ndi kutsatira
on-screen instructions provided by the wizard.

Q: How can I set the video source from OBS-Studio?

A: To set the video source, open OBS Studio,
add a video source, select VLC Video Source, name the source, add
the RTSP stream URL in the Properties page, and click OK to
tsimikizirani.

"``

OBS Plugin & Dockable Controller User Manual – English

M'ndandanda wazopezekamo
Chapter 1 System Requirements …………………………………………………… 2
1.1 System Requirements ……………………………………………………………………..2 1.2 Software Requirement ……………………………………………………………………..2
Chapter 2 Install OBS Plugin & Dockable Controller ………………………. 3
2.1 Install with Windows 7 / 10 ……………………………………………………………………….3 2.2 Install with Mac …………………………………………………………………………………………3
Chapter 3 Start Using …………………………………………………………………… 4
3.1 Confirm Network Setting………………………………………………………………………………… 4 3.2 Set video source from OBS-Studio ………………………………………………………………. 4 3.3 How to use Lumens OBS Plugin to control camera ……………………………………. 8 3.4 How to use Lumens OBS Dockable to control camera …………………………….. 11
Chapter 4 Operation Interface Description …………………………………… 15
4.1 OBS Plugin ……………………………………………………………………………………………………. 15 4.2 OBS Dockable ………………………………………………………………………………………………. 20
Copyright Information…………………………………………………………………… 22
1

Mutu 1 Zofunikira pa System
1.1 Zofunikira pa System
Windows 7 / 10 Mac 10.13 or above
1.2 Zofunikira pa Mapulogalamu
OSB-Studio 25.08 kapena pamwambapa
2

Chapter 2 Install OBS Plugin & Dockable Controller
2.1 Install with Windows 7 / 10
1. Please download OBS-Studio software and install it on your computer.
Please download OBS Plugin & Dockable Controller software from the Lumens webmalo.
2. Chotsani file downloaded and then click [ OBS Plugin and Dockable Controller.exe ] to install.
The installation wizard will guide you through the process. Please follow the on-screen instructions for the next step.
When the installation is completed, press [ Finish ] to end the installation.
2.2 Kukhazikitsa ndi Mac
1. Please download OBS-Studio software and install it on your Mac. 2. Please download OBS Plugin & Dockable Controller software from the Lumens
website. 3. Click [ OBS Plugin and Dockable Controller.pkg ] to install.
3

Mutu 3 Yambani Kugwiritsa Ntchito
3.1 Tsimikizirani Kukhazikitsa Kwa Netiweki
To confirm the computer is on the same network segment as the camera.

Kamera

Ethernet Cable
Sinthani kapena rauta

Kompyuta

3.2 Set video source from OBS-Studio
1. Click [ OBS Studio ] icon to open the software.

4

2. Click “+” to add a video source. 3. Select [VLC Video Source].
5

4. Give a name to the video source and click [ OK ]. 5. In Properties page, select “+” then select [ Add Path/URL ].
6

6. Key in the RTSP stream URL then click [ OK ].
RTSP connection address formats are as follows: RTSP Main Streaming (4K@H.265)=> rtsp://camera IP:8554/hevc RTSP Sub1 Streaming (1080P@H.264)=> rtsp://camera IP:8557/h264 RTSP Sub2 Streaming (720P@H.264)=> rtsp://camera IP:8556/h264
7. Select RTSP URL on the Playlist then click [ OK ].
7

8. The stream will be displayed on the OBS-Studio.
3.3 How to use Lumens OBS Plugin to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Select [ Tools ] => [ Lumens OBS Plugin ] 8

2. Lumens OBS Plugin window will be displayed. 3. Select [ Settings ] => [ Camera Assign] 9

Press [ Search ] to find IP cameras from the same network. Select a Camera you would like to control from IP Camera List. Select the Camera No. You can change the Camera name. Click [ Apply ] and close Camera Assign window.

3

4

5 1

2
4. Select set Camera from Select Camera tab, Camera Control setting will be enable. Now you can control the camera via Lumens OBS plugin.

10

3.4 How to use Lumens OBS Dockable to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Sankhani [ View ] => [ Docks ] => [ Custom Browser Docks… ] 2. Custom Browser Docks window will be displayed.
11

3. Enter the Dock Name & URL Dock NameGive a name to the customized dock. URL: Koperani ulalo wokhazikitsidwa sample ndikuyiyika kumunda.
Za ku URL information, please find the installed folder of Dockable Controller. Normally the folder would be following path:
C: Pulogalamu Filesobs-studioLumensOBSPluginDockable Controller The part circled in the red box below is the dock samples.
4. Open the dock sample by browser and copy the URL.
12

5. Fill in the DockName, paste avove URL to custom browser docks window and then click [ Apply ].
6. Customized dock window will be displayed and you can merge it with OBS-Studio software.
13

7. Click [ PERFEREMCES ] to key in the IP address of the camera you would like to control and click [ Connect ].
8. After connecting, a pops windows will show the camera is connected. 9. Now you can use Lumens dockable to control the IP camera.
14

Mutu 4 Kufotokozera kwa Chiwonetsero cha Ntchito
4.1 OBS Plugin
4.1.1 Yaikulu

1

2

3

4

6

5

7

8

Ayi

Kanthu

1 Zikhazikiko

2 View

3 Thandizo

4

Sankhani Kamera

Mafotokozedwe Antchito
Settings options: Camera assign: Enter the camera setting. Please refer to 4.1.2
Settings-Camera Assign Use HotKeys: When checked, prompt window will pop up: Need to set HotKeys
in OBS.
Mutha kudina [File]=>[Setting]=>[HotKeys] on OBS-studio to set. PanTilt limit: Enter PanTilt limit setting. Please refer to 4.1.3 Settings- PanTilt
limit Preset rename: Enter Preset rename setting. Please refer to 4.1.4 Settings-
Preset rename Close: Close Lumens OBS Plugin.
View options: Simple mode Advance mode: please refer to 4.1.5 View- Advance mode
Show about us information.
Select the camera number you want to control. Need to set from [ Settings ] => [ Camera assign ] first.
15

If the connection fails, a message window will pop up.

5 Makulitsidwe chiŵerengero

Adjust the zoom-in or zoom-out ratio via the slider bar.

6

Pan / Kupendekera kokhazikika

7 Kuyikira Kwambiri

Adjust the Pan/Tilt position of the camera screen.
Select MF(manual) / AF(automatic) focus. The focusing range is adjustable when the focus mode is set to “Manual”.

8 Preset setting Select the number first and then select [ STORE ] or [ CALL ].

4.1.2 Settings-Camera Assign

1

2

3

4

6

5

Ayi

Kanthu

Mafotokozedwe Antchito

1 IP adilesi

You can apply the IP of the IP Camera list or manually enter the IP.

2 Camera No.

Select Camera 1~8

3 Kamera Dzina

Manually edit the camera name.

4 Lemberani

Click to apply settings.

5 Sakani

Click to search for Lumens PTZ Camera, click in the IP Camera list and IP will fill in the IP Address box.

6 IP Camera List

List the searched Camera IP and Camera ID after click search button.

<Remark>Lumens OBS plug-in CANNOT auto-discover Lumens NDI cameras. Please manually add Lumens NDI models via IP address.

16

4.1.3 Settings- PanTilt limit

1 2

3

Ayi

Kanthu

1 PanTilt limit

2 PanTilt limit setting

3 PTZ Speed Comp

Mafotokozedwe Antchito
Switch button to enable/disable PanTilt limit setting.
Set PanTilt limit position. Switch button to enable/disable the Pan/Tilt speed vary with the position of the Zoom. <Caution> Don’t support VC-A50P and VC-BC series.

4.1.4 Settings- Preset rename

Kufotokozera
You can edit the Preset name and click [ Apply ] to save settings.
17

4.1.5 View- Advance mode
1
2

3 4

Ayi

Kanthu

1 PTZF Speed

2 Kuwonekera

3 Kusamala Koyera

Mafotokozedwe Antchito
Adjust the moving speed of Pan/Tilt/Zoom/Focus/Preset. Exposure Mode: Select exposure mode (Auto/Manual) Shutter speed: The shutter speed is adjustable when the exposure mode
is set to “Manual”. Iris: The size of aperture is adjustable when the exposure mode is set to
“Manual”. Gain: The gain limit is adjustable when the exposure mode is set to
“Manual”. Scene Mode: Select Scene mode(Low Light/Indoor/Backlight/Motion)

Mawonekedwe a zochitika

Shutter speed Iris Gain

1/30(1/25) 1/60(1/50)

F2.0

F3.2

33db

24db

1/120 F4.5 21dB

<Remark>VC-A50P does not support Gain

White Balance Mode: Select the White Balance mode.

Zagalimoto (4000K~7000K)

M'nyumba (3200K)

Outdoor (5800K)

1/180 F3.2 27dB

18

4 Chithunzi

One Push Manual (R Gain +/- ; B Gain +/- ) R/B Gain: Manually adjust blue/red gain value. One Push: One push WB will be trigger when the white balance mode is set to “One Push”. Image Mode: Select the Image mode (Default/Custom) When the image mode is set to Custom, following items can be adjusted Sharpness: Adjust the sharpness of the image. Saturation: Saturation adjustment of the image. Hue: Adjust the hue. Gamma: Gamma Level adjustment. Dig-Effect: Set the mode at which the image is turned. (OFF/MIRROR/FLIP/MIRROR+FLIP)

19

4.2 OBS Dockable
4.2.1 Control window
2 4

1 3

7

Ayi

Kanthu

1 Kamera Dzina

5

6

Mafotokozedwe Antchito
Show the camera name you are controlling. Move the camera into the position you want and click the preset button you want to assign.

2 ASSIGN PRESETS

3 PREFERENCES 4 Preset Controller 5 Zoom 6 Focus 7 Pan/Tilt/Home

Please refer to 4.2.2 PREFERENCES Press the button to execute Preset Recall. Adjust the zoom-in or zoom-out. Adjust the focus range. Adjust the Pan/Tilt/Home position of the camera screen.

20

4.2.2 PERFERENCES
1 2 3 4
5

Ayi

Kanthu

1 IP adilesi

2 Kamera Dzina

3 Kukhazikitsa mabatani
4 Speed 5 Initial Position

Mafotokozedwe Antchito
Enter the IP address the Camera and click [Connect] button.
Modify the camera name. (Default: Camera01) Camera names are limited to 1 – 12 characters. Please use a camera name by mixing uppercase and lowercase letters or numbers. Do not use “/” and “space” or special symbols. Press buttons to switch the mode. Mirror- On/Off Filp- On/Off Motionless Preser- On/Off Focus- Manual/Auto Adjust the moving speed of Pan/Tilt/Zoom/Focus. Select the initial position. ( Last MEM / 1st Preset)

21

Zambiri Zaumwini
Maumwini © Lumens Digital Optics Inc. Ufulu wonse ndi wotetezedwa. Lumens ndi chizindikiro chomwe chikulembetsedwa pano ndi Lumens Digital Optics Inc. Kukopera, kupanganso kapena kufalitsa izi. file sikuloledwa ngati chilolezo sichikuperekedwa ndi Lumens Digital Optics Inc. pokhapokha mutakopera izi file ndicholinga chosunga zosunga zobwezeretsera mutagula izi. Kuti mupitilize kukonza zinthu, zidziwitso zomwe zili mu izi file imatha kusintha popanda chidziwitso. Kuti tifotokoze bwino bwino momwe mankhwalawa agwiritsire ntchito, bukuli litha kuloza ku mayina azinthu zina kapena makampani popanda cholinga chophwanya malamulo. Chodzikanira pa zitsimikizo: Lumens Digital Optics Inc. ilibe udindo pazolakwika zilizonse zaukadaulo, zosintha kapena zosiyidwa, ndipo sizikhala ndi udindo pazowonongeka zilizonse kapena zokhudzana nazo chifukwa chopereka izi. file, kugwiritsa ntchito, kapena kugwiritsa ntchito mankhwalawa.
22

Zolemba / Zothandizira

Lumens OBS Plugin and Dockable Controller [pdf] Buku Logwiritsa Ntchito OBS Plugin and Dockable Controller, Plugin and Dockable Controller, Dockable Controller, Controller

Maumboni

• Buku Logwiritsa Ntchito