Plugin OBS agus Smachdair a ghabhas a cheangal

“

Fiosrachadh toraidh

Sònrachaidhean

• Riatanasan an t-siostaim: Windows 7 / 10, Mac 10.13
  no gu h-àrd
• Riatanasan bathar-bog: OBS-Studio 25.08 or
  gu h-àrd

Stiùireadh airson cleachdadh bathar

Chapter 2: Install OBS Plugin & Dockable Controller

2.1 Install with Windows 7 / 10

1. Luchdaich sìos bathar-bog OBS-Studio agus stàlaich e air do
   coimpiutair.
2. Download OBS Plugin & Dockable Controller software from the
   Lumens weblàrach.
3. Thoir a-mach an luchdachadh sìos file and run [ OBS Plugin and Dockable
   Controller.exe ] to start the installation.
4. Follow the on-screen instructions provided by the installation
   draoidh.
5. Once installation is complete, click [ Finish ].

2.2 Stàlaich le Mac

1. Luchdaich sìos bathar-bog OBS-Studio agus stàlaich e air do Mac.
2. Download OBS Plugin & Dockable Controller software from the
   Lumens weblàrach.
3. Click [ OBS Plugin and Dockable Controller.pkg ] to
   stàladh.

Chapter 3: Start Using

3.1 Dearbhaich suidheachadh an lìonraidh

To ensure the computer is on the same network segment as the
camera, follow the setup below:

• Camara
• Càball Ethernet
• Switch no Router
• Coimpiutar

3.2 Set video source from OBS-Studio

1. Open OBS Studio software.
2. Add a video source by clicking +.
3. Select [VLC Video Source].
4. Name the video source and click [ OK ].
5. In the Properties page, click + then select [ Add Path/URL
   ].
6. Enter the RTSP stream URL and click [ OK ].

Ceistean Cumanta (FAQ)

Q: What are the system requirements for using the OBS Plugin
& Dockable Controller?

A: The system requirements are Windows 7/10 or
Mac 10.13 or above. Additionally, OBS-Studio version 25.08 or above
tha feum air.

Q: How do I install the software on a Windows PC?

A: To install on Windows, download OBS-Studio
software and the OBS Plugin & Dockable Controller software from
the Lumens weblàrach. Ruith an stàladh file agus lean an
on-screen instructions provided by the wizard.

Q: How can I set the video source from OBS-Studio?

A: To set the video source, open OBS Studio,
add a video source, select VLC Video Source, name the source, add
the RTSP stream URL in the Properties page, and click OK to
dearbhadh.

“`

OBS Plugin & Dockable Controller User Manual – English

Clàr-innse
Chapter 1 System Requirements …………………………………………………… 2
1.1 System Requirements ……………………………………………………………………..2 1.2 Software Requirement ……………………………………………………………………..2
Chapter 2 Install OBS Plugin & Dockable Controller ………………………. 3
2.1 Install with Windows 7 / 10 ……………………………………………………………………….3 2.2 Install with Mac …………………………………………………………………………………………3
Chapter 3 Start Using …………………………………………………………………… 4
3.1 Confirm Network Setting………………………………………………………………………………… 4 3.2 Set video source from OBS-Studio ………………………………………………………………. 4 3.3 How to use Lumens OBS Plugin to control camera ……………………………………. 8 3.4 How to use Lumens OBS Dockable to control camera …………………………….. 11
Chapter 4 Operation Interface Description …………………………………… 15
4.1 OBS Plugin ……………………………………………………………………………………………………. 15 4.2 OBS Dockable ………………………………………………………………………………………………. 20
Copyright Information…………………………………………………………………… 22
1

Caibideil 1 Riatanasan an t-siostaim
1.1 Riatanasan an t-siostaim
Windows 7 / 10 Mac 10.13 or above
1.2 Riatanasan bathar-bog
OSB-Studio 25.08 no nas àirde
2

Chapter 2 Install OBS Plugin & Dockable Controller
2.1 Install with Windows 7 / 10
1. Please download OBS-Studio software and install it on your computer.
Please download OBS Plugin & Dockable Controller software from the Lumens weblàrach.
2. Earrann an file downloaded and then click [ OBS Plugin and Dockable Controller.exe ] to install.
The installation wizard will guide you through the process. Please follow the on-screen instructions for the next step.
When the installation is completed, press [ Finish ] to end the installation.
2.2 Stàlaich le Mac
1. Please download OBS-Studio software and install it on your Mac. 2. Please download OBS Plugin & Dockable Controller software from the Lumens
website. 3. Click [ OBS Plugin and Dockable Controller.pkg ] to install.
3

Caibideil 3 Tòisich a ’cleachdadh
3.1 Dearbhaich suidheachadh an lìonraidh
To confirm the computer is on the same network segment as the camera.

Camara

Càball Ethernet
Switch no Router

Coimpiutar

3.2 Set video source from OBS-Studio
1. Click [ OBS Studio ] icon to open the software.

4

2. Click “+” to add a video source. 3. Select [VLC Video Source].
5

4. Give a name to the video source and click [ OK ]. 5. In Properties page, select “+” then select [ Add Path/URL ].
6

6. Key in the RTSP stream URL then click [ OK ].
RTSP connection address formats are as follows: RTSP Main Streaming (4K@H.265)=> rtsp://camera IP:8554/hevc RTSP Sub1 Streaming (1080P@H.264)=> rtsp://camera IP:8557/h264 RTSP Sub2 Streaming (720P@H.264)=> rtsp://camera IP:8556/h264
7. Select RTSP URL on the Playlist then click [ OK ].
7

8. The stream will be displayed on the OBS-Studio.
3.3 How to use Lumens OBS Plugin to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Select [ Tools ] => [ Lumens OBS Plugin ] 8

2. Lumens OBS Plugin window will be displayed. 3. Select [ Settings ] => [ Camera Assign] 9

Press [ Search ] to find IP cameras from the same network. Select a Camera you would like to control from IP Camera List. Select the Camera No. You can change the Camera name. Click [ Apply ] and close Camera Assign window.

3

4

5 1

2
4. Select set Camera from Select Camera tab, Camera Control setting will be enable. Now you can control the camera via Lumens OBS plugin.

10

3.4 How to use Lumens OBS Dockable to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Tagh [ View ] => [ Docks ] => [ Custom Browser Docks… ] 2. Custom Browser Docks window will be displayed.
11

3. Enter the Dock Name & URL Dock NameGive a name to the customized dock. URL: Dèan lethbhreac den doca ceangail stàlaichte sample agus paisg e don achadh.
Airson an URL information, please find the installed folder of Dockable Controller. Normally the folder would be following path:
C: Prògram Filesobs-studioLumensOBSPluginDockable Controller The part circled in the red box below is the dock samples.
4. Open the dock sample by browser and copy the URL.
12

5. Fill in the DockName, paste avove URL to custom browser docks window and then click [ Apply ].
6. Customized dock window will be displayed and you can merge it with OBS-Studio software.
13

7. Click [ PERFEREMCES ] to key in the IP address of the camera you would like to control and click [ Connect ].
8. After connecting, a pops windows will show the camera is connected. 9. Now you can use Lumens dockable to control the IP camera.
14

Caibideil 4 Tuairisgeul Eadar-aghaidh Obrachaidh
4.1 OBS Plugin
Prìomh 4.1.1

1

2

3

4

6

5

7

8

Chan eil

Nì

1 Roghainnean

2 View

3 Cuideachadh

4

Tagh Camara

Tuairisgeul gnìomh
Settings options: Camera assign: Enter the camera setting. Please refer to 4.1.2
Settings-Camera Assign Use HotKeys: When checked, prompt window will pop up: Need to set HotKeys
in OBS.
Faodaidh tu briogadh air [File]=>[Setting]=>[HotKeys] on OBS-studio to set. PanTilt limit: Enter PanTilt limit setting. Please refer to 4.1.3 Settings- PanTilt
limit Preset rename: Enter Preset rename setting. Please refer to 4.1.4 Settings-
Preset rename Close: Close Lumens OBS Plugin.
View options: Simple mode Advance mode: please refer to 4.1.5 View- Advance mode
Show about us information.
Select the camera number you want to control. Need to set from [ Settings ] => [ Camera assign ] first.
15

If the connection fails, a message window will pop up.

5 Co-mheas Zoom

Adjust the zoom-in or zoom-out ratio via the slider bar.

6

Suidheachadh Pan / Teilt

7 Fòcas

Adjust the Pan/Tilt position of the camera screen.
Select MF(manual) / AF(automatic) focus. The focusing range is adjustable when the focus mode is set to “Manual”.

8 Preset setting Select the number first and then select [ STORE ] or [ CALL ].

4.1.2 Settings-Camera Assign

1

2

3

4

6

5

Chan eil

Nì

Tuairisgeul gnìomh

1 Seòladh IP

You can apply the IP of the IP Camera list or manually enter the IP.

2 Camera No.

Select Camera 1~8

3 Ainm a ’chamara

Manually edit the camera name.

4 Cuiribh

Click to apply settings.

5 Rannsaich

Click to search for Lumens PTZ Camera, click in the IP Camera list and IP will fill in the IP Address box.

6 IP Camera List

List the searched Camera IP and Camera ID after click search button.

<Remark>Lumens OBS plug-in CANNOT auto-discover Lumens NDI cameras. Please manually add Lumens NDI models via IP address.

16

4.1.3 Settings- PanTilt limit

1 2

3

Chan eil

Nì

1 PanTilt limit

2 PanTilt limit setting

3 PTZ Speed Comp

Tuairisgeul gnìomh
Switch button to enable/disable PanTilt limit setting.
Set PanTilt limit position. Switch button to enable/disable the Pan/Tilt speed vary with the position of the Zoom. <Caution> Don’t support VC-A50P and VC-BC series.

4.1.4 Settings- Preset rename

Tuairisgeulan
You can edit the Preset name and click [ Apply ] to save settings.
17

4.1.5 View- Advance mode
1
2

3 4

Chan eil

Nì

1 PTZF Speed

2 Foillseachadh

3 Cothromachadh Geal

Tuairisgeul gnìomh
Adjust the moving speed of Pan/Tilt/Zoom/Focus/Preset. Exposure Mode: Select exposure mode (Auto/Manual) Shutter speed: The shutter speed is adjustable when the exposure mode
is set to “Manual”. Iris: The size of aperture is adjustable when the exposure mode is set to
“Manual”. Gain: The gain limit is adjustable when the exposure mode is set to
“Manual”. Scene Mode: Select Scene mode(Low Light/Indoor/Backlight/Motion)

Modh seallaidh

Shutter speed Iris Gain

1/30(1/25) 1/60(1/50)

F2.0

F3.2

33dB

24dB

1/120 F4.5 21dB

<Remark>VC-A50P does not support Gain

White Balance Mode: Select the White Balance mode.

Auto (4000K ~ 7000K)

A-staigh (3200K)

Outdoor (5800K)

1/180 F3.2 27dB

18

4 Ìomhaigh

One Push Manual (R Gain +/- ; B Gain +/- ) R/B Gain: Manually adjust blue/red gain value. One Push: One push WB will be trigger when the white balance mode is set to “One Push”. Image Mode: Select the Image mode (Default/Custom) When the image mode is set to Custom, following items can be adjusted Sharpness: Adjust the sharpness of the image. Saturation: Saturation adjustment of the image. Hue: Adjust the hue. Gamma: Gamma Level adjustment. Dig-Effect: Set the mode at which the image is turned. (OFF/MIRROR/FLIP/MIRROR+FLIP)

19

4.2 OBS Dockable
4.2.1 Control window
2 4

1 3

7

Chan eil

Nì

1 Ainm a ’chamara

5

6

Tuairisgeul gnìomh
Show the camera name you are controlling. Move the camera into the position you want and click the preset button you want to assign.

2 ASSIGN PRESETS

3 PREFERENCES 4 Preset Controller 5 Zoom 6 Focus 7 Pan/Tilt/Home

Please refer to 4.2.2 PREFERENCES Press the button to execute Preset Recall. Adjust the zoom-in or zoom-out. Adjust the focus range. Adjust the Pan/Tilt/Home position of the camera screen.

20

4.2.2 PERFERENCES
1 2 3 4
5

Chan eil

Nì

1 Seòladh IP

2 Ainm a ’chamara

3 Suidhich putanan
4 Speed 5 Initial Position

Tuairisgeul gnìomh
Enter the IP address the Camera and click [Connect] button.
Modify the camera name. (Default: Camera01) Camera names are limited to 1 – 12 characters. Please use a camera name by mixing uppercase and lowercase letters or numbers. Do not use “/” and “space” or special symbols. Press buttons to switch the mode. Mirror- On/Off Filp- On/Off Motionless Preser- On/Off Focus- Manual/Auto Adjust the moving speed of Pan/Tilt/Zoom/Focus. Select the initial position. ( Last MEM / 1st Preset)

21

Fiosrachadh Dlighe-sgrìobhaidh
Còraichean dlighe-sgrìobhaidh © Lumens Digital Optics Inc. Gach còir glèidhte. Tha Lumens na chomharra-malairt a tha an-dràsta air a chlàradh le Lumens Digital Optics Inc. A ’dèanamh lethbhreac, ath-riochdachadh no sgaoileadh seo file chan eil e ceadaichte mura h-eil cead air a thoirt seachad le Lumens Digital Optics Inc. mura dèanar lethbhreac dheth file tha e airson adhbhar cùl-taic às deidh dhut an toradh seo a cheannach. Gus cumail a ’leasachadh an toraidh, tha am fiosrachadh an seo file faodaidh e atharrachadh gun rabhadh ro-làimh. Gus làn mhìneachadh no cunntas a thoirt air mar a bu chòir an toradh seo a chleachdadh, faodaidh an leabhar-làimhe seo iomradh a thoirt air ainmean thoraidhean no chompanaidhean eile gun rùn a bhith a ’briseadh. Àicheadh ​​barantas: Chan eil Lumens Digital Optics Inc. an urra ri mearachdan teicneòlais, deasachaidh no dearmad sam bith a dh ’fhaodadh a bhith ann, no an urra ri milleadh sam bith co-cheangailte no co-cheangailte ris ag èirigh bho bhith a’ toirt seachad seo file, a’ cleachdadh, no ag obrachadh an toraidh seo.
22

Sgrìobhainnean/Goireasan

Lumens OBS Plugin and Dockable Controller [pdfLeabhar-làimhe an neach-cleachdaidh OBS Plugin and Dockable Controller, Plugin and Dockable Controller, Dockable Controller, Controller

Iomraidhean

• Leabhar-làimhe cleachdaiche