OBS Plugin болон Dockable Controller

“

Бүтээгдэхүүний мэдээлэл

Үзүүлэлтүүд

• Системийн шаардлага: Windows 7 / 10, Mac 10.13
  эсвэл түүнээс дээш
• Програм хангамжийн шаардлага: OBS-Studio 25.08 or
  дээрх

Бүтээгдэхүүнийг ашиглах заавар

Chapter 2: Install OBS Plugin & Dockable Controller

2.1 Install with Windows 7 / 10

1. OBS-Studio программ хангамжийг татаж аваад суулгаарай
   компьютер.
2. Download OBS Plugin & Dockable Controller software from the
   Люмен webсайт.
3. Татаж авсан зүйлийг задлах file and run [ OBS Plugin and Dockable
   Controller.exe ] to start the installation.
4. Follow the on-screen instructions provided by the installation
   шидтэн.
5. Once installation is complete, click [ Finish ].

2.2 Mac дээр суулгана уу

1. OBS-Studio програмыг татаж аваад Mac дээрээ суулгаарай.
2. Download OBS Plugin & Dockable Controller software from the
   Люмен webсайт.
3. Click [ OBS Plugin and Dockable Controller.pkg ] to
   суулгах.

Chapter 3: Start Using

3.1 Сүлжээний тохиргоог баталгаажуулна уу

To ensure the computer is on the same network segment as the
camera, follow the setup below:

• Камер
• Ethernet кабель
• Шилжүүлэгч эсвэл чиглүүлэгч
• Компьютер

3.2 Set video source from OBS-Studio

1. Open OBS Studio software.
2. Add a video source by clicking +.
3. Select [VLC Video Source].
4. Name the video source and click [ OK ].
5. In the Properties page, click + then select [ Add Path/URL
   ].
6. Enter the RTSP stream URL and click [ OK ].

Байнга асуудаг асуултууд (FAQ)

Q: What are the system requirements for using the OBS Plugin
& Dockable Controller?

A: The system requirements are Windows 7/10 or
Mac 10.13 or above. Additionally, OBS-Studio version 25.08 or above
шаардлагатай.

Q: How do I install the software on a Windows PC?

A: To install on Windows, download OBS-Studio
software and the OBS Plugin & Dockable Controller software from
the Lumens webсайт. Суулгацыг ажиллуул file мөн дагаж мөрдөөрэй
on-screen instructions provided by the wizard.

Q: How can I set the video source from OBS-Studio?

A: To set the video source, open OBS Studio,
add a video source, select VLC Video Source, name the source, add
the RTSP stream URL in the Properties page, and click OK to
батлах.

“`

OBS Plugin & Dockable Controller User Manual – English

Агуулга
Chapter 1 System Requirements …………………………………………………… 2
1.1 System Requirements ……………………………………………………………………..2 1.2 Software Requirement ……………………………………………………………………..2
Chapter 2 Install OBS Plugin & Dockable Controller ………………………. 3
2.1 Install with Windows 7 / 10 ……………………………………………………………………….3 2.2 Install with Mac …………………………………………………………………………………………3
Chapter 3 Start Using …………………………………………………………………… 4
3.1 Confirm Network Setting………………………………………………………………………………… 4 3.2 Set video source from OBS-Studio ………………………………………………………………. 4 3.3 How to use Lumens OBS Plugin to control camera ……………………………………. 8 3.4 How to use Lumens OBS Dockable to control camera …………………………….. 11
Chapter 4 Operation Interface Description …………………………………… 15
4.1 OBS Plugin ……………………………………………………………………………………………………. 15 4.2 OBS Dockable ………………………………………………………………………………………………. 20
Copyright Information…………………………………………………………………… 22
1

1-р бүлэг Системийн шаардлага
1.1 Системийн шаардлага
Windows 7 / 10 Mac 10.13 or above
1.2 Програм хангамжид тавигдах шаардлага
OSB-Studio 25.08 ба түүнээс дээш
2

Chapter 2 Install OBS Plugin & Dockable Controller
2.1 Install with Windows 7 / 10
1. Please download OBS-Studio software and install it on your computer.
Please download OBS Plugin & Dockable Controller software from the Lumens webсайт.
2.-г задлах file downloaded and then click [ OBS Plugin and Dockable Controller.exe ] to install.
The installation wizard will guide you through the process. Please follow the on-screen instructions for the next step.
When the installation is completed, press [ Finish ] to end the installation.
2.2 Mac дээр суулгана уу
1. Please download OBS-Studio software and install it on your Mac. 2. Please download OBS Plugin & Dockable Controller software from the Lumens
website. 3. Click [ OBS Plugin and Dockable Controller.pkg ] to install.
3

3-р бүлэг Ашиглаж эхлэх
3.1 Сүлжээний тохиргоог баталгаажуулна уу
To confirm the computer is on the same network segment as the camera.

Камер

Ethernet кабель
Шилжүүлэгч эсвэл чиглүүлэгч

Компьютер

3.2 Set video source from OBS-Studio
1. Click [ OBS Studio ] icon to open the software.

4

2. Click “+” to add a video source. 3. Select [VLC Video Source].
5

4. Give a name to the video source and click [ OK ]. 5. In Properties page, select “+” then select [ Add Path/URL ].
6

6. Key in the RTSP stream URL then click [ OK ].
RTSP connection address formats are as follows: RTSP Main Streaming (4K@H.265)=> rtsp://camera IP:8554/hevc RTSP Sub1 Streaming (1080P@H.264)=> rtsp://camera IP:8557/h264 RTSP Sub2 Streaming (720P@H.264)=> rtsp://camera IP:8556/h264
7. Select RTSP URL on the Playlist then click [ OK ].
7

8. The stream will be displayed on the OBS-Studio.
3.3 How to use Lumens OBS Plugin to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Select [ Tools ] => [ Lumens OBS Plugin ] 8

2. Lumens OBS Plugin window will be displayed. 3. Select [ Settings ] => [ Camera Assign] 9

Press [ Search ] to find IP cameras from the same network. Select a Camera you would like to control from IP Camera List. Select the Camera No. You can change the Camera name. Click [ Apply ] and close Camera Assign window.

3

4

5 1

2
4. Select set Camera from Select Camera tab, Camera Control setting will be enable. Now you can control the camera via Lumens OBS plugin.

10

3.4 How to use Lumens OBS Dockable to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. [-г сонгоно уу View ] => [ Docks ] => [ Custom Browser Docks… ] 2. Custom Browser Docks window will be displayed.
11

3. Enter the Dock Name & URL Dock NameGive a name to the customized dock. URL: Суулгасан холбоосын док-г хуулнаample болон талбарт буулгана уу.
төлөө URL information, please find the installed folder of Dockable Controller. Normally the folder would be following path:
C: Програм Filesobs-studioLumensOBSPluginDockable Controller The part circled in the red box below is the dock samples.
4. Open the dock sample by browser and copy the URL.
12

5. Fill in the DockName, paste avove URL to custom browser docks window and then click [ Apply ].
6. Customized dock window will be displayed and you can merge it with OBS-Studio software.
13

7. Click [ PERFEREMCES ] to key in the IP address of the camera you would like to control and click [ Connect ].
8. After connecting, a pops windows will show the camera is connected. 9. Now you can use Lumens dockable to control the IP camera.
14

Бүлэг 4 Үйлдлийн интерфейсийн тодорхойлолт
4.1 OBS Plugin
4.1.1 үндсэн

1

2

3

4

6

5

7

8

Үгүй

Зүйл

1 Тохиргоо

2 View

3 Тусламж

4

Камерыг сонгоно уу

Функцийн тодорхойлолт
Settings options: Camera assign: Enter the camera setting. Please refer to 4.1.2
Settings-Camera Assign Use HotKeys: When checked, prompt window will pop up: Need to set HotKeys
in OBS.
Та [ дарж болноFile]=>[Setting]=>[HotKeys] on OBS-studio to set. PanTilt limit: Enter PanTilt limit setting. Please refer to 4.1.3 Settings- PanTilt
limit Preset rename: Enter Preset rename setting. Please refer to 4.1.4 Settings-
Preset rename Close: Close Lumens OBS Plugin.
View options: Simple mode Advance mode: please refer to 4.1.5 View- Advance mode
Show about us information.
Select the camera number you want to control. Need to set from [ Settings ] => [ Camera assign ] first.
15

If the connection fails, a message window will pop up.

5 Томруулах харьцаа

Adjust the zoom-in or zoom-out ratio via the slider bar.

6

Пан / хазайлтын тохиргоо

7 Анхаарал хандуулах

Adjust the Pan/Tilt position of the camera screen.
Select MF(manual) / AF(automatic) focus. The focusing range is adjustable when the focus mode is set to “Manual”.

8 Preset setting Select the number first and then select [ STORE ] or [ CALL ].

4.1.2 Settings-Camera Assign

1

2

3

4

6

5

Үгүй

Зүйл

Функцийн тодорхойлолт

1 IP хаяг

You can apply the IP of the IP Camera list or manually enter the IP.

2 Camera No.

Select Camera 1~8

3 Камерын нэр

Manually edit the camera name.

4 Өргөдөл гаргах

Click to apply settings.

5 Хайлт

Click to search for Lumens PTZ Camera, click in the IP Camera list and IP will fill in the IP Address box.

6 IP Camera List

List the searched Camera IP and Camera ID after click search button.

<Remark>Lumens OBS plug-in CANNOT auto-discover Lumens NDI cameras. Please manually add Lumens NDI models via IP address.

16

4.1.3 Settings- PanTilt limit

1 2

3

Үгүй

Зүйл

1 PanTilt limit

2 PanTilt limit setting

3 PTZ Speed Comp

Функцийн тодорхойлолт
Switch button to enable/disable PanTilt limit setting.
Set PanTilt limit position. Switch button to enable/disable the Pan/Tilt speed vary with the position of the Zoom. <Caution> Don’t support VC-A50P and VC-BC series.

4.1.4 Settings- Preset rename

Тодорхойлолт
You can edit the Preset name and click [ Apply ] to save settings.
17

4.1.5 View- Advance mode
1
2

3 4

Үгүй

Зүйл

1 PTZF Speed

2 Өртөлт

3 Цагаан тэнцвэр

Функцийн тодорхойлолт
Adjust the moving speed of Pan/Tilt/Zoom/Focus/Preset. Exposure Mode: Select exposure mode (Auto/Manual) Shutter speed: The shutter speed is adjustable when the exposure mode
is set to “Manual”. Iris: The size of aperture is adjustable when the exposure mode is set to
“Manual”. Gain: The gain limit is adjustable when the exposure mode is set to
“Manual”. Scene Mode: Select Scene mode(Low Light/Indoor/Backlight/Motion)

Үзэсгэлэнгийн горим

Shutter speed Iris Gain

1/30(1/25) 1/60(1/50)

F2.0

F3.2

33дБ

24дБ

1/120 F4.5 21dB

<Remark>VC-A50P does not support Gain

White Balance Mode: Select the White Balance mode.

Автомат (4000К~7000К)

Дотор (3200K)

Outdoor (5800K)

1/180 F3.2 27dB

18

4 Зураг

One Push Manual (R Gain +/- ; B Gain +/- ) R/B Gain: Manually adjust blue/red gain value. One Push: One push WB will be trigger when the white balance mode is set to “One Push”. Image Mode: Select the Image mode (Default/Custom) When the image mode is set to Custom, following items can be adjusted Sharpness: Adjust the sharpness of the image. Saturation: Saturation adjustment of the image. Hue: Adjust the hue. Gamma: Gamma Level adjustment. Dig-Effect: Set the mode at which the image is turned. (OFF/MIRROR/FLIP/MIRROR+FLIP)

19

4.2 OBS Dockable
4.2.1 Control window
2 4

1 3

7

Үгүй

Зүйл

1 Камерын нэр

5

6

Функцийн тодорхойлолт
Show the camera name you are controlling. Move the camera into the position you want and click the preset button you want to assign.

2 ASSIGN PRESETS

3 PREFERENCES 4 Preset Controller 5 Zoom 6 Focus 7 Pan/Tilt/Home

Please refer to 4.2.2 PREFERENCES Press the button to execute Preset Recall. Adjust the zoom-in or zoom-out. Adjust the focus range. Adjust the Pan/Tilt/Home position of the camera screen.

20

4.2.2 PERFERENCES
1 2 3 4
5

Үгүй

Зүйл

1 IP хаяг

2 Камерын нэр

3 Тохиргооны товчлуурууд
4 Speed 5 Initial Position

Функцийн тодорхойлолт
Enter the IP address the Camera and click [Connect] button.
Modify the camera name. (Default: Camera01) Camera names are limited to 1 – 12 characters. Please use a camera name by mixing uppercase and lowercase letters or numbers. Do not use “/” and “space” or special symbols. Press buttons to switch the mode. Mirror- On/Off Filp- On/Off Motionless Preser- On/Off Focus- Manual/Auto Adjust the moving speed of Pan/Tilt/Zoom/Focus. Select the initial position. ( Last MEM / 1st Preset)

21

Зохиогчийн эрхийн мэдээлэл
Зохиогчийн эрх © Lumens Digital Optics Inc. Бүх эрх хуулиар хамгаалагдсан. Lumens нь одоогоор Lumens Digital Optics Inc-д бүртгэгдэж байгаа худалдааны тэмдэг юм. Үүнийг хуулбарлах, хуулбарлах эсвэл дамжуулах file Lumens Digital Optics Inc.-аас лиценз олгоогүй бол үүнийг хуулбарлахаас бусад тохиолдолд зөвшөөрөхгүй file Энэ бүтээгдэхүүнийг худалдан авсны дараа нөөцлөх зориулалттай. Бүтээгдэхүүнээ үргэлжлүүлэн сайжруулахын тулд үүн дэх мэдээлэл file урьдчилан мэдэгдэлгүйгээр өөрчлөх боломжтой. Энэхүү гарын авлагад энэ бүтээгдэхүүнийг хэрхэн ашиглахыг бүрэн тайлбарлах эсвэл тайлбарлахын тулд бусад бүтээгдэхүүн эсвэл компаниудын нэрийг ямар ч зөрчил гаргахгүй байж болно. Баталгаат хариуцлагаас татгалзах: Lumens Digital Optics Inc. нь аливаа технологийн, редакцийн алдаа, орхигдлыг хариуцахгүй бөгөөд үүнийг өгөхөөс үүдэн гарсан санамсаргүй болон холбогдох хохирлыг хариуцахгүй. file, энэ бүтээгдэхүүнийг ашиглах, ажиллуулах.
22

Баримт бичиг / нөөц

Lumens OBS Plugin and Dockable Controller [pdf] Хэрэглэгчийн гарын авлага OBS Plugin and Dockable Controller, Plugin and Dockable Controller, Dockable Controller, Controller

Лавлагаа

• Хэрэглэгчийн гарын авлага