የወረደውን ያውጡ file and run [ OBS Plugin and Dockable
Controller.exe ] to start the installation.
Follow the on-screen instructions provided by the installation
ጠንቋይ ።

Once installation is complete, click [ Finish ].

2.2 በ Mac ጫን

OBS-Studio ሶፍትዌርን ያውርዱ እና በእርስዎ Mac ላይ ይጫኑት።

Download OBS Plugin & Dockable Controller software from the
Lumens webጣቢያ.
Click [ OBS Plugin and Dockable Controller.pkg ] to
ጫን።

Chapter 3: Start Using

3.1 የአውታረ መረብ ቅንብርን ያረጋግጡ

To ensure the computer is on the same network segment as the
camera, follow the setup below:

ካሜራ

የኤተርኔት ገመድ
ቀይር ወይም ራውተር

ኮምፒውተር

3.2 Set video source from OBS-Studio

Open OBS Studio software.

Add a video source by clicking +.
Select [VLC Video Source].

Name the video source and click [ OK ].
In the Properties page, click + then select [ Add Path/URL
].

Enter the RTSP stream URL and click [ OK ].

ተዘውትረው የሚጠየቁ ጥያቄዎች (FAQ)

Q: What are the system requirements for using the OBS Plugin
& Dockable Controller?

A: The system requirements are Windows 7/10 or
Mac 10.13 or above. Additionally, OBS-Studio version 25.08 or above
የሚፈለግ ነው።

Q: How do I install the software on a Windows PC?

A: To install on Windows, download OBS-Studio
software and the OBS Plugin & Dockable Controller software from
the Lumens webጣቢያ. መጫኑን ያሂዱ file እና ይከተሉ
on-screen instructions provided by the wizard.

Q: How can I set the video source from OBS-Studio?

A: To set the video source, open OBS Studio,
add a video source, select VLC Video Source, name the source, add
the RTSP stream URL in the Properties page, and click OK to
ማረጋገጥ.

View Fullscreen

OBS Plugin & Dockable Controller User Manual – English

ማውጫ
Chapter 1 System Requirements …………………………………………………… 2
1.1 System Requirements ……………………………………………………………………..2 1.2 Software Requirement ……………………………………………………………………..2
Chapter 2 Install OBS Plugin & Dockable Controller ………………………. 3
2.1 Install with Windows 7 / 10 ……………………………………………………………………….3 2.2 Install with Mac …………………………………………………………………………………………3
Chapter 3 Start Using …………………………………………………………………… 4
3.1 Confirm Network Setting………………………………………………………………………………… 4 3.2 Set video source from OBS-Studio ………………………………………………………………. 4 3.3 How to use Lumens OBS Plugin to control camera ……………………………………. 8 3.4 How to use Lumens OBS Dockable to control camera …………………………….. 11
Chapter 4 Operation Interface Description …………………………………… 15
4.1 OBS Plugin ……………………………………………………………………………………………………. 15 4.2 OBS Dockable ………………………………………………………………………………………………. 20
Copyright Information…………………………………………………………………… 22
1

ምዕራፍ 1 የስርዓት መስፈርቶች
1.1 የስርዓት መስፈርቶች
Windows 7 / 10 Mac 10.13 or above
1.2 የሶፍትዌር መስፈርቶች
OSB-ስቱዲዮ 25.08 ወይም ከዚያ በላይ
2

Chapter 2 Install OBS Plugin & Dockable Controller
2.1 Install with Windows 7 / 10
1. Please download OBS-Studio software and install it on your computer.
Please download OBS Plugin & Dockable Controller software from the Lumens webጣቢያ.
2. ያውጡ file downloaded and then click [ OBS Plugin and Dockable Controller.exe ] to install.
The installation wizard will guide you through the process. Please follow the on-screen instructions for the next step.
When the installation is completed, press [ Finish ] to end the installation.
2.2 በ Mac ጫን
1. Please download OBS-Studio software and install it on your Mac. 2. Please download OBS Plugin & Dockable Controller software from the Lumens
website. 3. Click [ OBS Plugin and Dockable Controller.pkg ] to install.
3

ምዕራፍ 3 መጠቀም ጀምር
3.1 የአውታረ መረብ ቅንብርን ያረጋግጡ
To confirm the computer is on the same network segment as the camera.

ካሜራ

የኤተርኔት ገመድ
ቀይር ወይም ራውተር

ኮምፒውተር

3.2 Set video source from OBS-Studio
1. Click [ OBS Studio ] icon to open the software.

2. Click “+” to add a video source. 3. Select [VLC Video Source].
5

4. Give a name to the video source and click [ OK ]. 5. In Properties page, select “+” then select [ Add Path/URL ].
6

6. Key in the RTSP stream URL then click [ OK ].
RTSP connection address formats are as follows: RTSP Main Streaming (4K@H.265)=> rtsp://camera IP:8554/hevc RTSP Sub1 Streaming (1080P@H.264)=> rtsp://camera IP:8557/h264 RTSP Sub2 Streaming (720P@H.264)=> rtsp://camera IP:8556/h264
7. Select RTSP URL on the Playlist then click [ OK ].
7

8. The stream will be displayed on the OBS-Studio.
3.3 How to use Lumens OBS Plugin to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Select [ Tools ] => [ Lumens OBS Plugin ] 8

2. Lumens OBS Plugin window will be displayed. 3. Select [ Settings ] => [ Camera Assign] 9

Press [ Search ] to find IP cameras from the same network. Select a Camera you would like to control from IP Camera List. Select the Camera No. You can change the Camera name. Click [ Apply ] and close Camera Assign window.

5 1 እ.ኤ.አ

2
4. Select set Camera from Select Camera tab, Camera Control setting will be enable. Now you can control the camera via Lumens OBS plugin.

3.4 How to use Lumens OBS Dockable to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. ምረጥ [ View ] => [ Docks ] => [ Custom Browser Docks… ] 2. Custom Browser Docks window will be displayed.
11

3. Enter the Dock Name & URL Dock NameGive a name to the customized dock. URLየተጫነውን አገናኝ ዶክ sample እና ወደ ሜዳው ይለጥፉት.
ለ URL information, please find the installed folder of Dockable Controller. Normally the folder would be following path:
ሐ፡ ፕሮግራም Filesobs-studioLumensOBSPluginDockable Controller The part circled in the red box below is the dock sampሌስ.
4. Open the dock sample by browser and copy the URL.
12

5. Fill in the DockName, paste avove URL to custom browser docks window and then click [ Apply ].
6. Customized dock window will be displayed and you can merge it with OBS-Studio software.
13

7. Click [ PERFEREMCES ] to key in the IP address of the camera you would like to control and click [ Connect ].
8. After connecting, a pops windows will show the camera is connected. 9. Now you can use Lumens dockable to control the IP camera.
14

ምዕራፍ 4 የክወና በይነገጽ መግለጫ
4.1 OBS Plugin
4.1.1 ዋና

አይ

ንጥል

የ 1 ቅንጅቶች

2 View

3 እገዛ

ካሜራ ይምረጡ

የተግባር መግለጫዎች
Settings options: Camera assign: Enter the camera setting. Please refer to 4.1.2
Settings-Camera Assign Use HotKeys: When checked, prompt window will pop up: Need to set HotKeys
in OBS.
ጠቅ ማድረግ ይችላሉ [File]=>[Setting]=>[HotKeys] on OBS-studio to set. PanTilt limit: Enter PanTilt limit setting. Please refer to 4.1.3 Settings- PanTilt
limit Preset rename: Enter Preset rename setting. Please refer to 4.1.4 Settings-
Preset rename Close: Close Lumens OBS Plugin.
View options: Simple mode Advance mode: please refer to 4.1.5 View- Advance mode
Show about us information.
Select the camera number you want to control. Need to set from [ Settings ] => [ Camera assign ] first.
15

If the connection fails, a message window will pop up.

5 የማጉላት ጥምርታ

Adjust the zoom-in or zoom-out ratio via the slider bar.

የፓን / ማጋደል ቅንብር

7 ትኩረት

Adjust the Pan/Tilt position of the camera screen.
Select MF(manual) / AF(automatic) focus. The focusing range is adjustable when the focus mode is set to “Manual”.

8 Preset setting Select the number first and then select [ STORE ] or [ CALL ].

4.1.2 Settings-Camera Assign

አይ

ንጥል

የተግባር መግለጫዎች

1 አይፒ አድራሻ

You can apply the IP of the IP Camera list or manually enter the IP.

2 Camera No.

Select Camera 1~8

3 የካሜራ ስም

Manually edit the camera name.

4 ያመልክቱ

Click to apply settings.

5 ፈልግ

Click to search for Lumens PTZ Camera, click in the IP Camera list and IP will fill in the IP Address box.

6 IP Camera List

List the searched Camera IP and Camera ID after click search button.

<Remark>Lumens OBS plug-in CANNOT auto-discover Lumens NDI cameras. Please manually add Lumens NDI models via IP address.

4.1.3 Settings- PanTilt limit

1 2 እ.ኤ.አ

አይ

ንጥል

1 PanTilt limit

2 PanTilt limit setting

3 PTZ Speed Comp

የተግባር መግለጫዎች
Switch button to enable/disable PanTilt limit setting.
Set PanTilt limit position. Switch button to enable/disable the Pan/Tilt speed vary with the position of the Zoom. <Caution> Don’t support VC-A50P and VC-BC series.

4.1.4 Settings- Preset rename

መግለጫዎች
You can edit the Preset name and click [ Apply ] to save settings.
17

4.1.5 View- Advance mode
1
2

3 4 እ.ኤ.አ

አይ

ንጥል

1 PTZF Speed

2 መጋለጥ

3 ነጭ ሚዛን

የተግባር መግለጫዎች
Adjust the moving speed of Pan/Tilt/Zoom/Focus/Preset. Exposure Mode: Select exposure mode (Auto/Manual) Shutter speed: The shutter speed is adjustable when the exposure mode
is set to “Manual”. Iris: The size of aperture is adjustable when the exposure mode is set to
“Manual”. Gain: The gain limit is adjustable when the exposure mode is set to
“Manual”. Scene Mode: Select Scene mode(Low Light/Indoor/Backlight/Motion)

የትዕይንት ሁኔታ

Shutter speed Iris Gain

1/30(1/25) 1/60(1/50)

F2.0

F3.2

33 ዲቢ

24 ዲቢ

1/120 F4.5 21dB

<Remark>VC-A50P does not support Gain

White Balance Mode: Select the White Balance mode.

ራስ-ሰር (4000 ኪ ~ 7000 ኪ)

የቤት ውስጥ (3200 ኪ)

Outdoor (5800K)

1/180 F3.2 27dB

4 ምስል

One Push Manual (R Gain +/- ; B Gain +/- ) R/B Gain: Manually adjust blue/red gain value. One Push: One push WB will be trigger when the white balance mode is set to “One Push”. Image Mode: Select the Image mode (Default/Custom) When the image mode is set to Custom, following items can be adjusted Sharpness: Adjust the sharpness of the image. Saturation: Saturation adjustment of the image. Hue: Adjust the hue. Gamma: Gamma Level adjustment. Dig-Effect: Set the mode at which the image is turned. (OFF/MIRROR/FLIP/MIRROR+FLIP)

4.2 OBS Dockable
4.2.1 Control window
2 4 እ.ኤ.አ

1 3 እ.ኤ.አ

አይ

ንጥል

1 የካሜራ ስም

የተግባር መግለጫዎች
Show the camera name you are controlling. Move the camera into the position you want and click the preset button you want to assign.

2 ASSIGN PRESETS

3 PREFERENCES 4 Preset Controller 5 Zoom 6 Focus 7 Pan/Tilt/Home

Please refer to 4.2.2 PREFERENCES Press the button to execute Preset Recall. Adjust the zoom-in or zoom-out. Adjust the focus range. Adjust the Pan/Tilt/Home position of the camera screen.

4.2.2 PERFERENCES
1 2 3 4
5

አይ

ንጥል

1 አይፒ አድራሻ

2 የካሜራ ስም

3 የማቀናበሪያ አዝራሮች
4 Speed 5 Initial Position

የተግባር መግለጫዎች
Enter the IP address the Camera and click [Connect] button.
Modify the camera name. (Default: Camera01) Camera names are limited to 1 – 12 characters. Please use a camera name by mixing uppercase and lowercase letters or numbers. Do not use “/” and “space” or special symbols. Press buttons to switch the mode. Mirror- On/Off Filp- On/Off Motionless Preser- On/Off Focus- Manual/Auto Adjust the moving speed of Pan/Tilt/Zoom/Focus. Select the initial position. ( Last MEM / 1st Preset)

የቅጂ መብት መረጃ
የቅጂ መብት © Lumens Digital Optics Inc. ሁሉም መብቶች የተጠበቁ ናቸው። Lumens በአሁኑ ጊዜ በ Lumens Digital Optics Inc የተመዘገበ የንግድ ምልክት ነው። ይህንን በመቅዳት፣ በማባዛት ወይም በማስተላለፍ ላይ file ይህንን ካልገለበጡ በቀር ፍቃድ በ Lumens Digital Optics Inc. ካልተሰጠ አይፈቀድም። file ይህንን ምርት ከገዙ በኋላ ለመጠባበቂያ ዓላማ ነው. ምርቱን ማሻሻል ለመቀጠል, በዚህ ውስጥ ያለው መረጃ file ያለቅድመ ማስታወቂያ ሊለወጥ ይችላል. ይህ ምርት እንዴት ጥቅም ላይ መዋል እንዳለበት ሙሉ ለሙሉ ለማብራራት ወይም ለመግለፅ ይህ ማኑዋል ያለ አንዳች የመብት ጥሰት የሌላ ምርቶችን ወይም የኩባንያዎችን ስም ሊያመለክት ይችላል። የዋስትና ማስተባበያ፡ Lumens Digital Optics Inc. ለማንኛውም የቴክኖሎጂ፣ የአርትዖት ስህተቶች ወይም ግድፈቶች ተጠያቂ አይደለም፣ ወይም ይህንን በማቅረብ ለሚደርሱ ማናቸውም ድንገተኛ ወይም ተዛማጅ ጉዳቶች ተጠያቂ አይደለም። fileይህንን ምርት መጠቀም ወይም ማስኬድ።
22

ሰነዶች / መርጃዎች

Lumens OBS Plugin and Dockable Controller [pdf] የተጠቃሚ መመሪያ
OBS Plugin and Dockable Controller, Plugin and Dockable Controller, Dockable Controller, Controller

ዋቢዎች

የተጠቃሚ መመሪያ

Lumens OBS Plugin and Dockable Controller User Manual

OBS Plugin and Dockable Controller

የምርት መረጃ

ዝርዝሮች

የምርት አጠቃቀም መመሪያዎች

Chapter 2: Install OBS Plugin & Dockable Controller

2.1 Install with Windows 7 / 10