OBS dodatak i kontroler koji se može priključiti na stanicu

“

Informacije o proizvodu

Specifikacije

• Sistemski zahtjevi: Windows 7 / 10, Mac 10.13
  ili iznad
• Softverski zahtjevi: OBS-Studio 25.08 or
  gore

Upute za upotrebu proizvoda

Chapter 2: Install OBS Plugin & Dockable Controller

2.1 Install with Windows 7 / 10

1. Download OBS-Studio software and install it on your
   kompjuter.
2. Download OBS Plugin & Dockable Controller software from the
   Lumeni website.
3. Izvucite preuzeto file and run [ OBS Plugin and Dockable
   Controller.exe ] to start the installation.
4. Follow the on-screen instructions provided by the installation
   čarobnjak.
5. Once installation is complete, click [ Finish ].

2.2 Install with Mac

1. Preuzmite softver OBS-Studio i instalirajte ga na svoj Mac.
2. Download OBS Plugin & Dockable Controller software from the
   Lumeni website.
3. Click [ OBS Plugin and Dockable Controller.pkg ] to
   instalirati.

Chapter 3: Start Using

3.1 Potvrdite postavke mreže

To ensure the computer is on the same network segment as the
camera, follow the setup below:

• Kamera
• Ethernet kabl
• Prekidač ili ruter
• Kompjuter

3.2 Set video source from OBS-Studio

1. Open OBS Studio software.
2. Add a video source by clicking +.
3. Select [VLC Video Source].
4. Name the video source and click [ OK ].
5. In the Properties page, click + then select [ Add Path/URL
   ].
6. Enter the RTSP stream URL and click [ OK ].

Često postavljana pitanja (FAQ)

Q: What are the system requirements for using the OBS Plugin
& Dockable Controller?

A: The system requirements are Windows 7/10 or
Mac 10.13 or above. Additionally, OBS-Studio version 25.08 or above
je potrebno.

Q: How do I install the software on a Windows PC?

A: To install on Windows, download OBS-Studio
software and the OBS Plugin & Dockable Controller software from
the Lumens website. Pokrenite instalaciju file i pratite
on-screen instructions provided by the wizard.

Q: How can I set the video source from OBS-Studio?

A: To set the video source, open OBS Studio,
add a video source, select VLC Video Source, name the source, add
the RTSP stream URL in the Properties page, and click OK to
potvrditi.

“`

OBS Plugin & Dockable Controller User Manual – English

Sadržaj
Chapter 1 System Requirements …………………………………………………… 2
1.1 System Requirements ……………………………………………………………………..2 1.2 Software Requirement ……………………………………………………………………..2
Chapter 2 Install OBS Plugin & Dockable Controller ………………………. 3
2.1 Install with Windows 7 / 10 ……………………………………………………………………….3 2.2 Install with Mac …………………………………………………………………………………………3
Chapter 3 Start Using …………………………………………………………………… 4
3.1 Confirm Network Setting………………………………………………………………………………… 4 3.2 Set video source from OBS-Studio ………………………………………………………………. 4 3.3 How to use Lumens OBS Plugin to control camera ……………………………………. 8 3.4 How to use Lumens OBS Dockable to control camera …………………………….. 11
Chapter 4 Operation Interface Description …………………………………… 15
4.1 OBS Plugin ……………………………………………………………………………………………………. 15 4.2 OBS Dockable ………………………………………………………………………………………………. 20
Copyright Information…………………………………………………………………… 22
1

Poglavlje 1 Sistemski zahtjevi
1.1 Sistemski zahtjevi
Windows 7 / 10 Mac 10.13 or above
1.2 Softverski zahtjevi
OSB-Studio 25.08 ili noviji
2

Chapter 2 Install OBS Plugin & Dockable Controller
2.1 Install with Windows 7 / 10
1. Please download OBS-Studio software and install it on your computer.
Please download OBS Plugin & Dockable Controller software from the Lumens website.
2. Ekstrahirajte file downloaded and then click [ OBS Plugin and Dockable Controller.exe ] to install.
The installation wizard will guide you through the process. Please follow the on-screen instructions for the next step.
When the installation is completed, press [ Finish ] to end the installation.
2.2 Install with Mac
1. Please download OBS-Studio software and install it on your Mac. 2. Please download OBS Plugin & Dockable Controller software from the Lumens
website. 3. Click [ OBS Plugin and Dockable Controller.pkg ] to install.
3

Poglavlje 3 Počnite koristiti
3.1 Potvrdite postavke mreže
To confirm the computer is on the same network segment as the camera.

Kamera

Ethernet kabl
Prekidač ili ruter

Kompjuter

3.2 Set video source from OBS-Studio
1. Click [ OBS Studio ] icon to open the software.

4

2. Click “+” to add a video source. 3. Select [VLC Video Source].
5

4. Give a name to the video source and click [ OK ]. 5. In Properties page, select “+” then select [ Add Path/URL ].
6

6. Key in the RTSP stream URL then click [ OK ].
RTSP connection address formats are as follows: RTSP Main Streaming (4K@H.265)=> rtsp://camera IP:8554/hevc RTSP Sub1 Streaming (1080P@H.264)=> rtsp://camera IP:8557/h264 RTSP Sub2 Streaming (720P@H.264)=> rtsp://camera IP:8556/h264
7. Select RTSP URL on the Playlist then click [ OK ].
7

8. The stream will be displayed on the OBS-Studio.
3.3 How to use Lumens OBS Plugin to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Select [ Tools ] => [ Lumens OBS Plugin ] 8

2. Lumens OBS Plugin window will be displayed. 3. Select [ Settings ] => [ Camera Assign] 9

Press [ Search ] to find IP cameras from the same network. Select a Camera you would like to control from IP Camera List. Select the Camera No. You can change the Camera name. Click [ Apply ] and close Camera Assign window.

3

4

5 1

2
4. Select set Camera from Select Camera tab, Camera Control setting will be enable. Now you can control the camera via Lumens OBS plugin.

10

3.4 How to use Lumens OBS Dockable to control camera
< Please note that the OBS plugin and Dockable cannot be used simultaneously, as doing so may cause instability >
1. Odaberite [ View ] => [ Docks ] => [ Custom Browser Docks… ] 2. Custom Browser Docks window will be displayed.
11

3. Enter the Dock Name & URL Dock NameGive a name to the customized dock. URL: Copy the installed link dock sample and paste it to the field.
Za URL information, please find the installed folder of Dockable Controller. Normally the folder would be following path:
C: Program Filesobs-studioLumensOBSPluginDockable Controller The part circled in the red box below is the dock samples.
4. Open the dock sample by browser and copy the URL.
12

5. Fill in the DockName, paste avove URL to custom browser docks window and then click [ Apply ].
6. Customized dock window will be displayed and you can merge it with OBS-Studio software.
13

7. Click [ PERFEREMCES ] to key in the IP address of the camera you would like to control and click [ Connect ].
8. After connecting, a pops windows will show the camera is connected. 9. Now you can use Lumens dockable to control the IP camera.
14

Poglavlje 4 Opis interfejsa za rad
4.1 OBS Plugin
4.1.1 Main

1

2

3

4

6

5

7

8

br

Stavka

1 Podešavanja

2 View

3 Pomoć

4

Odaberite kameru

Opisi funkcija
Settings options: Camera assign: Enter the camera setting. Please refer to 4.1.2
Settings-Camera Assign Use HotKeys: When checked, prompt window will pop up: Need to set HotKeys
in OBS.
Možete kliknuti [File]=>[Setting]=>[HotKeys] on OBS-studio to set. PanTilt limit: Enter PanTilt limit setting. Please refer to 4.1.3 Settings- PanTilt
limit Preset rename: Enter Preset rename setting. Please refer to 4.1.4 Settings-
Preset rename Close: Close Lumens OBS Plugin.
View options: Simple mode Advance mode: please refer to 4.1.5 View- Advance mode
Show about us information.
Select the camera number you want to control. Need to set from [ Settings ] => [ Camera assign ] first.
15

If the connection fails, a message window will pop up.

5 Omjer zumiranja

Adjust the zoom-in or zoom-out ratio via the slider bar.

6

Postavka Pan/Tilt

7 Fokus

Adjust the Pan/Tilt position of the camera screen.
Select MF(manual) / AF(automatic) focus. The focusing range is adjustable when the focus mode is set to “Manual”.

8 Preset setting Select the number first and then select [ STORE ] or [ CALL ].

4.1.2 Settings-Camera Assign

1

2

3

4

6

5

br

Stavka

Opisi funkcija

1 IP adresa

You can apply the IP of the IP Camera list or manually enter the IP.

2 Camera No.

Select Camera 1~8

3 Naziv kamere

Manually edit the camera name.

4 Prijavite se

Click to apply settings.

5 Pretraga

Click to search for Lumens PTZ Camera, click in the IP Camera list and IP will fill in the IP Address box.

6 IP Camera List

List the searched Camera IP and Camera ID after click search button.

<Remark>Lumens OBS plug-in CANNOT auto-discover Lumens NDI cameras. Please manually add Lumens NDI models via IP address.

16

4.1.3 Settings- PanTilt limit

1 2

3

br

Stavka

1 PanTilt limit

2 PanTilt limit setting

3 PTZ Speed Comp

Opisi funkcija
Switch button to enable/disable PanTilt limit setting.
Set PanTilt limit position. Switch button to enable/disable the Pan/Tilt speed vary with the position of the Zoom. <Caution> Don’t support VC-A50P and VC-BC series.

4.1.4 Settings- Preset rename

Opisi
You can edit the Preset name and click [ Apply ] to save settings.
17

4.1.5 View- Advance mode
1
2

3 4

br

Stavka

1 PTZF Speed

2 Izloženost

3 Balans belog

Opisi funkcija
Adjust the moving speed of Pan/Tilt/Zoom/Focus/Preset. Exposure Mode: Select exposure mode (Auto/Manual) Shutter speed: The shutter speed is adjustable when the exposure mode
is set to “Manual”. Iris: The size of aperture is adjustable when the exposure mode is set to
“Manual”. Gain: The gain limit is adjustable when the exposure mode is set to
“Manual”. Scene Mode: Select Scene mode(Low Light/Indoor/Backlight/Motion)

Režim scene

Shutter speed Iris Gain

1/30(1/25) 1/60(1/50)

F2.0

F3.2

33dB

24dB

1/120 F4.5 21dB

<Remark>VC-A50P does not support Gain

White Balance Mode: Select the White Balance mode.

automatski (4000K~7000K)

Unutrašnji (3200K)

Outdoor (5800K)

1/180 F3.2 27dB

18

4 Slika

One Push Manual (R Gain +/- ; B Gain +/- ) R/B Gain: Manually adjust blue/red gain value. One Push: One push WB will be trigger when the white balance mode is set to “One Push”. Image Mode: Select the Image mode (Default/Custom) When the image mode is set to Custom, following items can be adjusted Sharpness: Adjust the sharpness of the image. Saturation: Saturation adjustment of the image. Hue: Adjust the hue. Gamma: Gamma Level adjustment. Dig-Effect: Set the mode at which the image is turned. (OFF/MIRROR/FLIP/MIRROR+FLIP)

19

4.2 OBS Dockable
4.2.1 Control window
2 4

1 3

7

br

Stavka

1 Naziv kamere

5

6

Opisi funkcija
Show the camera name you are controlling. Move the camera into the position you want and click the preset button you want to assign.

2 ASSIGN PRESETS

3 PREFERENCES 4 Preset Controller 5 Zoom 6 Focus 7 Pan/Tilt/Home

Please refer to 4.2.2 PREFERENCES Press the button to execute Preset Recall. Adjust the zoom-in or zoom-out. Adjust the focus range. Adjust the Pan/Tilt/Home position of the camera screen.

20

4.2.2 PERFERENCES
1 2 3 4
5

br

Stavka

1 IP adresa

2 Naziv kamere

3 Dugmad za podešavanje
4 Speed 5 Initial Position

Opisi funkcija
Enter the IP address the Camera and click [Connect] button.
Modify the camera name. (Default: Camera01) Camera names are limited to 1 – 12 characters. Please use a camera name by mixing uppercase and lowercase letters or numbers. Do not use “/” and “space” or special symbols. Press buttons to switch the mode. Mirror- On/Off Filp- On/Off Motionless Preser- On/Off Focus- Manual/Auto Adjust the moving speed of Pan/Tilt/Zoom/Focus. Select the initial position. ( Last MEM / 1st Preset)

21

Informacije o autorskim pravima
Autorska prava © Lumens Digital Optics Inc. Sva prava zadržana. Lumens je zaštitni znak koji trenutno registruje Lumens Digital Optics Inc. Kopiranje, reprodukcija ili prijenos ovog file nije dozvoljeno ako licencu nije dao Lumens Digital Optics Inc. osim ako ovo kopirate file služi za rezervnu kopiju nakon kupovine ovog proizvoda. Kako biste nastavili poboljšavati proizvod, informacije u ovome file podložan je promjenama bez prethodne najave. Da bi se u potpunosti objasnio ili opisao kako treba koristiti ovaj proizvod, ovaj priručnik se može odnositi na nazive drugih proizvoda ili kompanija bez ikakve namjere kršenja. Odricanje od garancije: Lumens Digital Optics Inc. nije odgovorna za bilo kakve moguće tehnološke, uredničke greške ili propuste, niti je odgovorna za bilo kakvu slučajnu ili srodnu štetu koja proizlazi iz pružanja ovog file, korištenje ili rukovanje ovim proizvodom.
22

Dokumenti / Resursi

Lumens OBS Plugin and Dockable Controller [pdf] Korisnički priručnik OBS Plugin and Dockable Controller, Plugin and Dockable Controller, Dockable Controller, Controller

Reference

• Uputstvo za upotrebu