Boost B2-SSCT Static Single Frame Instruction Manual

B2-SSCT Static Single Frame

“

Awọn pato:

• Table feet: 2 pcs
• Centre bracket: 1 pc
• Column (right): 1 pc
• Center rails: 2 pcs
• Allen Wrench (4mm): 1 pc
• Allen Wrench (5mm): 1 pc

Awọn ilana Lilo ọja:

Awọn Itọsọna Apejọ:

1. Igbesẹ 1: Loose awọn boluti ti a ti fi sori ẹrọ tẹlẹ ati
   satunṣe awọn ipari ti awọn oke fireemu lati baramu awọn iwọn ti awọn tabili
   oke.
2. Igbesẹ 2: Insert the Column into the top frame,
   fix the lifting column with 4pcs screws M6x12.
3. Igbesẹ 3: Place the table feet on the Column,
   rotate it to align, then tighten the pre-installed bolt.
4. Igbesẹ 4: Gbe akọmọ ẹgbẹ si oke
   fireemu ati Mu awọn boluti.
5. Igbesẹ 5: Mount the tabletop and fix it with 14
   pcs screws ST4x20; Fix the centre bracket with 2 pcs screws M6x10.
   Tighten the pre-installed bolts on the top frame.

Fifi sori ẹrọ atẹ USB:

1. Igbesẹ 1: Fix awọn USB atẹ (B2-SSCT) si awọn
   cable tray arms (B2-SSARM) with 8 pcs M6x10 screws.
2. Igbesẹ 2: Fi sori ẹrọ awọn biraketi U si tabili
   frame with 4 pcs M8x10 screws. Mount the cable tray to the desk
   frame and fix it with 6 pcs M6x10 screws.

Fifi sori Panel Iboju (Iboju Aṣiri Shush30):

1. Igbesẹ 1: Fi awọn awo ti a tẹ si iboju
   panel (plates can be found in B2-SBRAC carton).
2. Igbesẹ 2: Install the screen brackets (B2-SBRAC)
   to the Shush30 Extrusion with 8 pcs M5x6 screws.
3. Igbesẹ 3: Fix the screen brackets (B2-SBRAC) to
   the desk frame with 10 pcs M6x10 screws.

Fifi sori Panel Iboju Iboju Eco Panel:

1. Igbesẹ 1: Install the screen brackets (B2-SBRAC)
   on the cable tray arm (B2-SSARM) with 10 PCS M6x10 Screws. The
   brackets direction as photos display.
2. Igbesẹ 2: Gbe EPS nronu loju iboju
   brackets using a 6mm drill bit (not included), drill out holes in
   Eco Panel Screen in line with back-to-back screen bracket holes.
   Place 8 x Double Ended Bolts M5*32mm -6mm through The screen
   bracket (B2-SBRAC) holes and the holes you have created in the Eco
   Panel Screen. Tighten double-ended bolt with an Allen key.

Awọn Ibeere Nigbagbogbo (FAQ):

Q: How many table feet are included in the package?

A: There are two table feet included.

Q: What size screws are used for fixing the lifting
ọwọn?

A: You need to use 4pcs screws M6x12 for fixing the lifting
ọwọn.

Q: How many pcs of Allen Wrench are provided?

A: There is one Allen Wrench of 4mm and one Allen Wrench of 5mm
pese ni package.

“`

Boost Static Single Frame Instruction Manual
1

Awọn ẹya ara ẹrọ

RARA. Orukọ paati

PCS

RARA. Orukọ paati

PCS

1

Awọn ẹsẹ tabili

2

9

Aarin akọmọ

1

2

Ọwọ (ọtun)

1

10 Center afowodimu

2

3

Ọkọ: M6x12

5

11 Top fireemu-2

1

4

Dabaru: ST4x20

22

12 Column( left)

1

5

Awọn biraketi ẹgbẹ

2

13 Allen Wrench(4mm)

1

6

Roba paadi

14

14 Allen Wrench(5mm)

1

7

Oke fireemu-1

1

15 Okun Tie

5

8

Ọkọ: M6x10

3

2

Awọn ilana Apejọ
Igbesẹ 1 Tu awọn boluti ti a ti fi sii tẹlẹ ki o Ṣatunṣe ipari ti fireemu oke lati baamu iwọn ti oke tabili.
Step 2 Inset the Column to the top frame,fix lifting column with 4pcs screws M6x12 like.
3

Step 3 Place the table feet on the Column and rotate it and make it align, then tighten the pre-installed bolt.
Igbesẹ 4 Gbe akọmọ ẹgbẹ si ori fireemu oke ki o di awọn boluti naa.
4

Step 5 Mount the tabletop and fix it with 14 pcs screws ST4x20; Fix the centre bracket with 2 pcs screws M6x10 Tighten the pre-installed bolts on the top fame
5

Fifi sori ẹrọ atẹ okun Igbesẹ 1 - Fix atẹ okun (B2-SSCT) si awọn apa atẹ okun (B2-SSARM) pẹlu awọn skru 8 pcs M6x10.
Igbesẹ 2 - Fi sori ẹrọ awọn biraketi U si fireemu tabili pẹlu awọn skru 4 PC M8x10. - Gbe atẹ okun naa si fireemu tabili ki o ṣatunṣe pẹlu awọn skru 6 pcs M6x10
6

Fifi sori ẹrọ nronu iboju (Iboju Aṣiri Shush30) Igbesẹ 1 - Fi awọn awo ti a tẹ sii si nronu iboju (awọn awo le rii ni paali B2-SBRAC)
Igbesẹ 2 - Fi sori ẹrọ awọn biraketi iboju (B2-SBRAC) si Shush30 Extrusion pẹlu 8 pcs M5x6 skru.
7

Igbesẹ 3 - Ṣe atunṣe awọn biraketi iboju (B2-SBRAC) si fireemu tabili pẹlu 10 PC M6x10 skru.
8

EPS (900mm H Eco Panel) Fifi sori ẹrọ igbimọ iboju Igbese 1 - Fi sori ẹrọ awọn biraketi iboju (B2-SBRAC) lori apa atẹ okun (B2-SSARM) pẹlu PCS M10x6 10 PCS
Itọsọna biraketi bi ifihan awọn fọto.
Igbese 2 - Gbe awọn EPS nronu lori awọn biraketi iboju Lilo 6mm lu bit (ko si pẹlu ), lu jade ihò ninu Eco Panel Iboju ni ila pẹlu pada si pada iboju biraketi ihò (Akiyesi: Carbide Drill Bits Work Best For PET panel) - Gbe 8 x Double End Bolts M5 * 32mm - 6mm nipasẹ The iboju akọmọ (B2-S) iho ti o ti ṣẹda. Mu boluti ti o pari meji pọ pẹlu bọtini Allen.
9

Awọn iwe aṣẹ / Awọn orisun

Boost B2-SSCT Static Single Frame [pdf] Ilana itọnisọna B2-SSCT, B2-SSARM, B2-SBRAC, B2-SSCT Static Single Frame, B2-SSCT, Static Single Frame, Single Frame, Frame

Awọn itọkasi

• Itọsọna olumulo