Boost B2-SSCT Static Single Frame Instruction Manual

B2-SSCT Static Single Frame

“

Nkọwapụta:

• Table feet: 2 pcs
• Centre bracket: 1 pc
• Column (right): 1 pc
• Center rails: 2 pcs
• Allen Wrench (4mm): 1 pc
• Allen Wrench (5mm): 1 pc

Ntuziaka ojiji:

Ntuziaka Mgbakọ:

1. Nzọụkwụ 1: Tọghee bolts etinyegoro na mbụ
   gbanwee ogologo nke etiti elu ka ọ dabara nha nke tebụl
   n'elu.
2. Nzọụkwụ 2: Insert the Column into the top frame,
   fix the lifting column with 4pcs screws M6x12.
3. Nzọụkwụ 3: Place the table feet on the Column,
   tụgharịa ya ka ọ kwụ n'ahịrị, wee mee ka bọtịnụ etinyegoro mbụ sie ike.
4. Nzọụkwụ 4: Tinye ihe nkwado n'akụkụ n'elu
   etiti na ikesie bolts.
5. Nzọụkwụ 5: Wụnye tabletop ma dozie ya na 14
   pcs screws ST4x20; Fix the centre bracket with 2 pcs screws M6x10.
   Mechie bolts etinyegoro na etiti elu.

Nwụnye eriri eriri USB:

1. Nzọụkwụ 1: Fix the cable tray (B2-SSCT) to the
   cable tray arms (B2-SSARM) with 8 pcs M6x10 screws.
2. Nzọụkwụ 2: Wụnye brackets U na tebụl
   etiti na 4 pcs M8x10 kposara. Tinye eriri eriri USB na tebụl
   etiti ma dozie ya na 6 pcs M6x10 kposara.

Nwụnye panel ihuenyo (Shush30 Ihuenyo nzuzo):

1. Nzọụkwụ 1: Fanye efere ndị etinyere na ihuenyo
   panel (a pụrụ ịhụ efere na katọn B2-SBRAC).
2. Nzọụkwụ 2: Wụnye brackets ihuenyo (B2-SBRAC)
   na Shush30 Extrusion na 8 pcs M5x6 kposara.
3. Nzọụkwụ 3: Dozie brackets ihuenyo (B2-SBRAC) na
   okpokoro okpokoro na 10 pcs M6x10 kposara.

Eco Panel Screen Panel Installation:

1. Nzọụkwụ 1: Wụnye brackets ihuenyo (B2-SBRAC)
   on the cable tray arm (B2-SSARM) with 10 PCS M6x10 Screws. The
   ntụzịaka brackets dị ka ngosipụta foto.
2. Nzọụkwụ 2: Debe panel EPS na ihuenyo
   brackets using a 6mm drill bit (not included), drill out holes in
   Ihuenyo Eco Panel dabara na oghere nkwado ihuenyo azụ na azụ.
   Place 8 x Double Ended Bolts M5*32mm -6mm through The screen
   oghere bracket (B2-SBRAC) na oghere ndị ị mepụtara na Eco
   Panel Screen. Tighten double-ended bolt with an Allen key.

Ajụjụ A na-ajụkarị (FAQ):

Q: How many table feet are included in the package?

A: There are two table feet included.

Q: What size screws are used for fixing the lifting
column?

A: You need to use 4pcs screws M6x12 for fixing the lifting
kọlụm.

Q: How many pcs of Allen Wrench are provided?

A: There is one Allen Wrench of 4mm and one Allen Wrench of 5mm
enyere na ngwugwu.

"'

Boost Static Single Frame Instruction Manual
1

Akụkụ akụkụ

Mba. Aha akụrụngwa

PCS

Mba. Aha akụrụngwa

PCS

1

Ụkwụ okpokoro

2

9

Ihe nkwado etiti

1

2

Ogidi(n'aka nri)

1

Ụgbọ okporo ígwè etiti 10

2

3

Ihe mkpuchi: M6x12

5

11 Eke kacha elu-2

1

4

Mkpọsa: ST4x20

22

Ogidi 12 (aka ekpe)

1

5

Ihe nkwado akụkụ

2

13 Allen Wrench (4mm)

1

6

Mpepe akwa

14

14 Allen Wrench (5mm)

1

7

Epeepe kacha elu-1

1

15 eriri eriri

5

8

Ihe mkpuchi: M6x10

3

2

Ntuziaka Mgbakọ
Kwụpụ 1 Tọghee bolts ndị etinyegoro na mbụ wee mezie ogologo etiti nke elu ka ọ dabara nha nke tebụl.
Nzọụkwụ 2 Tinye kọlụm ahụ n'elu etiti, dozie kọlụm na-ebuli elu na skru 4pcs M6x12 dị ka.
3

Kwụpụ 3 Debe ụkwụ okpokoro n'elu kọlụm ahụ wee tụgharịa ya ma mee ka ọ kwekọọ, wee mee ka ihe mgbochi etinyere ya sie ike.
Nzọụkwụ 4 Debe ihe nkwado dị n'akụkụ n'elu okpokolo agba ma mee ka bolts sie ike.
4

Nzọụkwụ 5 Ugwu tabletop ma dozie ya na 14 pcs kposara ST4x20; Idozi ihe nkwado etiti na skru pcs 2 M6x10 Mee ka bolts etinyegoro na ama ama kacha elu.
5

Cable tray installation Step 1 – Fix the cable tray(B2-SSCT ) to the cable tray arms(B2-SSARM) with 8 pcs M6x10 screws.
Kwụpụ 2 - Wụnye brackets U na okpokoro okpokoro nwere skru 4 pcs M8x10. - Tinye eriri USB ahụ na okpokoro okpokoro ma dozie ya na skru 6 pcs M6x10
6

Nwụnye panel panel ( Shush30 Privacy Screen ) Nzọụkwụ 1 - Fanye efere ndị a kụnyere na panel ihuenyo (a pụrụ ịhụ efere na B2-SBRAC katọn)
Nzọụkwụ 2 - Wụnye brackets ihuenyo ( B2-SBRAC ) na Shush30 Extrusion na 8 pcs M5x6 kposara.
7

Nzọụkwụ 3 - Idozi brackets ihuenyo ( B2-SBRAC ) na okpokoro okpokoro na 10 pcs M6x10 skru.
8

EPS ( 900mm H Eco Panel ) Ntinye ihuenyo Nzọụkwụ 1 - Wụnye brackets ihuenyo (B2-SBRAC) na ogwe aka eriri USB (B2-SSARM) na 10 PCS M6x10 skru
Ntuziaka brackets dị ka ihe ngosi foto.
Nzọụkwụ 2 - Debe EPS panel na ihuenyo brackets Iji 6mm drill bit (adịghị gụnyere ), kpochapu oghere na ihuenyo Eco Panel n'ahịrị na oghere azụ azụ azụ (Cheta: Carbide Drill Bits Work Best For PET panel) - Ebe 8 x Ugboro abụọ kwụsịrị Bolts M5 * 32mm - 6mm site na oghere ihuenyo (B2-S) na oghere ihuenyo EBRAC. Jiri igodo Allen mechie bolt kwụsịrị okpukpu abụọ.
9

Akwụkwọ / akụrụngwa

Boost B2-SSCT Static Single Frame [pdf] Akwụkwọ ntuziaka B2-SSCT, B2-SSARM, B2-SBRAC, B2-SSCT Static Single Frame, B2-SSCT, Static Single Frame, Single Frame, Frame

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ