Matlafatsa Buka ea Taelo ea Frame e le 'Ngoe ea B2-SSCT

B2-SSCT Static Single Frame

“

Litlhaloso:

• Maoto a tafole: 2 pcs
• Bracket e bohareng: 1 pc
• Kholomo (ka ho le letona): 1 pc
• Litšepe tse bohareng: li-pcs tse 2
• Allen Wrench (4mm): 1 pc
• Allen Wrench (5mm): 1 pc

Litaelo tsa Tšebeliso ea Sehlahisoa:

Litaelo tsa Kopano:

1. Mohato oa 1: Lokolla liboutu tse kentsoeng pele le
   lokisa bolelele ba foreimi e ka hodimo hore e tsamaellane le boholo ba tafole
   holimo.
2. Mohato oa 2: Kenya Kholomo ka foreiming e ka holimo,
   lokisa kholomo ea ho phahamisa ka 4pcs screws M6x12.
3. Mohato oa 3: Beha maoto a tafole holim'a Kholomo,
   e potoloha hore e ikamahanye, ebe o tiisa bolt e kentsoeng pele.
4. Mohato oa 4: Beha bracket e lehlakoreng ka holimo
   foreimi le ho tiisa liboutu.
5. Mohato oa 5: Beha tafole ea tafole 'me u e lokise ka 14
   li-pcs screws ST4x20; Lokisa bracket e bohareng ka li-screw tse 2 tsa M6x10.
   Tiisa liboutu tse seng li kentsoe foreiming e ka holimo.

Kemiso ea Terei ea Cable:

1. Mohato oa 1: Lokisa terei ea cable (B2-SSCT) ho ea
   liphaka tsa tray tsa cable (B2-SSARM) tse nang le li-screws tse 8 tsa M6x10.
2. Mohato oa 2: Kenya li-brackets tsa U tafoleng
   foreimi e nang le li-screw tse 4 tsa M8x10. Beha terei ea cable tafoleng
   foreimi le ho e lokisa ka li-screws tse 6 tsa M6x10.

Kenyelletso ea Panel ea Screen (Skrine sa Lekunutu sa Shush30):

1. Mohato oa 1: Kenya lipoleiti tse tiisitsoeng skrineng
   panel (lipoleiti li ka fumanoa ka lebokoseng la B2-SBRAC).
2. Mohato oa 2: Kenya masakaneng a skrineng (B2-SBRAC)
   ho Shush30 Extrusion e nang le li-screws tse 8 tsa M5x6.
3. Mohato oa 3: Lokisa masakaneng skrine (B2-SBRAC) ho
   foreimi ea deske e nang le li-screw tse 10 tsa M6x10.

Kenyelletso ea Eco Panel Screen Panel:

1. Mohato oa 1: Kenya masakaneng a skrineng (B2-SBRAC)
   letsohong la terei ea cable (B2-SSARM) e nang le 10 PCS M6x10 Screws. The
   masakaneng moo dinepe di bontshang.
2. Mohato oa 2: Beha karolo ea EPS skrineng
   masakaneng a sebelisa 6mm drill bit (e sa kenyelelitsoe), phunya masoba ka hare
   Eco Panel Screen e tsamaellanang le masoba a marang-rang a morao-rao.
   Beha li-bolts tse 8 x tse phethiloeng ka makhetlo a mabeli M5 * 32mm -6mm ka skrineng
   likoti (B2-SBRAC) le masoba ao u a entseng ho Eco
   Letlapa la skrine. Tobetsa bolt e nang le mahlakore a mabeli ka senotlolo sa Allen.

Lipotso Tse Botsoang Khafetsa (FAQ):

P: Ke maoto a makae a tafole a kenyelelitsoeng ka har'a sephutheloana?

A: Ho na le maoto a mabeli a tafole a kenyellelitsoeng.

P: Ho sebelisoa li-screw tsa boholo bofe ho lokisa ho phahamisa
kholomo?

A: U hloka ho sebelisa 4pcs screws M6x12 ho lokisa ho phahamisa
kholomo.

Q: Ho fanoa ka li-pcs tse kae tsa Allen Wrench?

A: Ho na le Wrench e le 'ngoe ea Allen ea 4mm le Wrench e le 'ngoe ea Allen ea 5mm
e fanoeng ka har'a sephutheloana.

"`

Boost Static Single Frame Taelo Manual
1

Likarolo tsa likarolo

NO. Lebitso la Karolo

PCS

NO. Lebitso la Karolo

PCS

1

Tafole maoto

2

9

Bracket e bohareng

1

2

Kholomo( ka ho le letona)

1

10 Center rails

2

3

Bolt: M6x12

5

11 Foreimi e ka holimo-2

1

4

Setšoantšo: ST4x20

22

12 Kholomo( ka ho le letšehali)

1

5

Masakana a mahlakoreng

2

13 Allen Wrench(4mm)

1

6

Moqomo oa Rubber

14

14 Allen Wrench(5mm)

1

7

Foreimi e ka holimo-1

1

15 Thae ea Cable

5

8

Bolt: M6x10

3

2

Litaelo tsa Kopano
Mohato oa 1 Lokolla liboutu tse kentsoeng pele 'me U lokise bolelele ba foreimi e ka holimo ho tsamaisana le boholo ba tafole.
Mohato oa 2 Kenya Kholomo foreiming e kaholimo, lokisa kholomo e phahamisang ka 4pcs screws M6x12 like.
3

Mohato oa 3 Beha maoto a tafole holim'a Kholomo 'me u e fetole 'me u etse hore e lumellane, ebe u tiisa bolt e kentsoeng pele.
Mohato oa 4 Beha bracket e lehlakoreng holim'a foreimi e ka holimo 'me u tiise liboutu.
4

Mohato oa 5 Hloa letlapa 'me u le lokise ka li-screws tse 14 tsa li-pcs ST4x20; Lokisa bracket e bohareng ka li-screw tse 2 M6x10 Tiisa liboutu tse kentsoeng pele botumong bo holimo.
5

Ho kenya terei ea cable Mohato oa 1 - Lokisa terei ea cable (B2-SSCT) ho liphaka tsa tray ea cable (B2-SSARM) ka li-screws tse 8 tsa M6x10.
Mohato oa 2 - Kenya li-brackets tsa U ho foreime ea deske ka li-screw tse 4 tsa M8x10. - Beha terei ea thapo ho foreime ea deske ebe u e lokisa ka li-screws tse 6 tsa M6x10
6

Ho kenya liphanele tsa skrine ( Skrine ea Lekunutu ea Shush30 ) Mohato oa 1 - Kenya lipoleiti tse kentsoeng skrineng (lipoleiti li ka fumanoa ka lebokoseng la B2-SBRAC)
Mohato oa 2 - Kenya li-brackets tsa skrine ( B2-SBRAC ) ho Shush30 Extrusion ka li-screw tse 8 tsa M5x6.
7

Mohato oa 3 - Lokisa li-brackets tsa skrine ( B2-SBRAC ) ho foreimi ea deske ka li-screw tse 10 tsa M6x10.
8

EPS ( 900mm H Eco Panel ) Ho kenngwa ha phanele ya skrine Mohato wa 1 – Kenya masakana a skrineng(B2-SBRAC) letsohong la terei ya thapo (B2-SSARM)ka 10 PCS M6x10 Screw
Masakaneng a lebisa moo linepe li hlahang.
Mohato oa 2 - Beha karolo ea EPS holim'a masakaneng a skrine U sebelisa 6mm drill bit (e sa kenyelelitsoe), phunya masoba ho Eco Panel Screen ho latela likoti tsa bracket tse ka morao (Hlokomela: Carbide Drill Bits Work Best For PET panel) - Beha 8 x Double Ended Bolts M5* 32mm - 6mm (B2) o entse likoti tsa AC ka har'a bracket ea hau. Eco Panel Screen. Tiisa bolt e qetellang habeli ka senotlolo sa Allen.
9

Litokomane / Lisebelisoa

Matlafatsa B2-SSCT Static Single Frame [pdf] Buka ea Taelo B2-SSCT, B2-SSARM, B2-SBRAC, B2-SSCT Frame e tsitsitseng e le 'Ngoe, B2-SSCT, Frame e tsitsitseng e le Mong, Frame e le 'Ngoe, Frame

Litšupiso

• Bukana ea Mosebelisi