Boost B2-SSCT Static Single Frame Instruction Manual

B2-SSCT Static Single Frame

“

Iinkcukacha:

• Table feet: 2 pcs
• Centre bracket: 1 pc
• Column (right): 1 pc
• Center rails: 2 pcs
• Allen Wrench (4mm): 1 pc
• Allen Wrench (5mm): 1 pc

Imiyalelo yokusetyenziswa kwemveliso:

Imiyalelo yeNdibano:

1. Inyathelo loku-1: Khulula iibholiti ezifakwe ngaphambili kunye
   Lungisa ubude besakhelo esiphezulu ukuze singqinelane nobukhulu betafile
   phezulu.
2. Inyathelo loku-2: Insert the Column into the top frame,
   fix the lifting column with 4pcs screws M6x12.
3. Inyathelo loku-3: Place the table feet on the Column,
   yijikelezise ukuze ilungelelanise, emva koko qinisa ibholithi efakwe ngaphambili.
4. Inyathelo loku-4: Beka isibiyeli esisecaleni phezulu
   isakhelo kwaye uqinise iibholithi.
5. Inyathelo loku-5: Nyusa itafile kwaye uyilungise nge-14
   pcs screws ST4x20; Fix the centre bracket with 2 pcs screws M6x10.
   Qinisa iibholiti ezifakwe ngaphambili kwisakhelo esiphezulu.

UFakelo lweTreyi yeCable:

1. Inyathelo loku-1: Fix the cable tray (B2-SSCT) to the
   cable tray arms (B2-SSARM) with 8 pcs M6x10 screws.
2. Inyathelo loku-2: Faka izibiyeli ze-U kwidesika
   isakhelo esine-4 pcs M8x10 screws. Nyusa itreyi yekhebula kwidesika
   isakhelo kwaye uyilungise nge-6 pcs M6x10 screws.

UFakelo lwePaneli yeSkrini (Shush30 iSikhusi saBucala):

1. Inyathelo loku-1: Faka iipleyiti ezicofayo kwiscreen
   iphaneli (iipleyiti zinokufumaneka kwibhokisi ye-B2-SBRAC).
2. Inyathelo loku-2: Faka izibiyeli zesikrini (B2-SBRAC)
   ukuya kwiShush30 Extrusion ene-8 pcs M5x6 screws.
3. Inyathelo loku-3: Lungisa izibiyeli zesikrini (B2-SBRAC) ukuze
   isakhelo sedesika esineepcs ezili-10 ze-M6x10.

Eco Panel Screen Panel Installation:

1. Inyathelo loku-1: Faka izibiyeli zesikrini (B2-SBRAC)
   on the cable tray arm (B2-SSARM) with 10 PCS M6x10 Screws. The
   izibiyeli isalathiso njengoko iifoto ukubonisa.
2. Inyathelo loku-2: Beka iphaneli ye-EPS kwisikrini
   brackets using a 6mm drill bit (not included), drill out holes in
   Isikrini sePaneli ye-Eco ngokuhambelana nemingxuma yesibiyeli sesikrini esibuyela ngasemva.
   Place 8 x Double Ended Bolts M5*32mm -6mm through The screen
   isibiyeli (B2-SBRAC) imingxunya kunye nemingxuma oyenzileyo kwi Eco
   Panel Screen. Tighten double-ended bolt with an Allen key.

Imibuzo Ebuzwa Rhoqo (FAQ):

Q: How many table feet are included in the package?

A: There are two table feet included.

Q: What size screws are used for fixing the lifting
ikholamu?

A: You need to use 4pcs screws M6x12 for fixing the lifting
ikholam.

Q: How many pcs of Allen Wrench are provided?

A: There is one Allen Wrench of 4mm and one Allen Wrench of 5mm
inikezelwe kwiphakheji.

"`

Boost Static Single Frame Instruction Manual
1

Amalungu amacandelo

HAYI. Igama lecandelo

PCS

HAYI. Igama lecandelo

PCS

1

Iinyawo zetafile

2

9

Isibiyeli esisembindini

1

2

Umqolo ( ekunene)

1

10 Iziko likaloliwe

2

3

Ibhonti: M6x12

5

11 Isakhelo esiphezulu-2

1

4

Isikroqo:ST4x20

22

12 ikholamu ( ekhohlo)

1

5

Izibiyeli ezisecaleni

2

13 Allen Wrench(4mm)

1

6

Irabha yentsimbi

14

14 Allen Wrench(5mm)

1

7

Isakhelo esiphezulu-1

1

15 Iqhina leCable

5

8

Ibhonti: M6x10

3

2

Imiyalelo yeNdibano
Inyathelo loku-1 Khulula iibholiti ezifakwe ngaphambili kwaye Lungisa ubude besakhelo esingaphezulu ukuze sihambelane nobukhulu betafile engaphezulu.
Inyathelo lesi-2 Faka iKholamu kwisakhelo esiphezulu, lungisa ikholamu yokunyusela ngezikrufu ze-4pcs M6x12 njenge.
3

Inyathelo lesi-3 Beka iinyawo zetafile kwiKholam kwaye uyijikelezise kwaye uyenze ilungelelanise, emva koko uqinise ibholithi efakwe ngaphambili.
Inyathelo lesi-4 Beka i-bracket yecala kwisakhelo esiphezulu kwaye uqinise iibholithi.
4

Isinyathelo sesi-5 Yifake i-tabletop kwaye uyilungise nge-14 pcs screws ST4x20; Lungisa isibiyeli esisembindini ngezikrufu ezi-2 iipcs M6x10 Qinisa iibholithi ezifakwe ngaphambili kudumo oluphezulu.
5

Ukufakwa kwe-cable tray Isinyathelo 1 - Lungisa i-cable tray (B2-SSCT) kwiingalo ze-cable tray (B2-SSARM) kunye ne-8 pcs M6x10 screws.
Inyathelo lesi-2 – Faka izibiyeli ze-U kwisakhelo sedesika enezikrufu ezi-4 ze-M8x10. -Nyusa itreyi yekhebula kwisakhelo sedesika kwaye uyilungise nge-6 pcs M6x10 screws
6

Ufakelo lwepaneli yesikrini ( Shush30 Ikhusi yaBucala ) Inyathelo loku-1 – Faka iipleyiti ezicofayo kwiqela lenjongo yesikrini ( iipleyiti zinokufunyanwa kwibhokisi ye-B2-SBRAC )
Inyathelo lesi-2 – Faka izibiyeli zesikrini ( B2-SBRAC ) kwiShush30 Extrusion ene-8 pcs M5x6 screws.
7

Inyathelo lesi-3 - Lungisa izibiyeli zesikrini ( B2-SBRAC ) kwisakhelo sedesika ene-10 pcs M6x10 screws.
8

I-EPS ( 900mm H Eco Panel ) Ufakelo lwepaneli yesikrini Inyathelo loku-1 – Faka izibiyeli zesikrini (B2-SBRAC) kwingalo yetreyi yentambo (B2-SSARM) ene-10 PCS M6x10 Screw
Izalathiso zezibiyeli njengoko iifoto zibonisa.
Inyathelo lesi-2 – Beka iphaneli ye-EPS kwizibiyeli zesikrini Ukusebenzisa i-drill bit ye-6mm (engabandakanyiweyo), khupha imingxuma kwi-Eco Panel Screen ngokuhambelana nemingxuma yesibiyeli yangasemva yesikrini ( Qaphela: I-Carbide Drill Bits Work Best For PET panel ) - Beka i-8 x Iibholiti ezipheliswe kabini M5 * 32mm - 6mm (i-B2) wenze i-AC imingxuma kunye ne-BXNUMX yesikrini Eco Panel Screen. Qinisa ibholithi ephindwe kabini ngeqhosha lika-Allen.
9

Amaxwebhu / Izibonelelo

Boost B2-SSCT Static Single Frame [pdf] Incwadi Yomyalelo B2-SSCT, B2-SSARM, B2-SBRAC, B2-SSCT Static Single Frame, B2-SSCT, Static Single Frame, Single Frame, Frame

Iimbekiselo

• Incwadi yokusebenzisa