AXXESS AXDSPX-GL10 Digital Signal Processor Ilana Ilana

Bass bọtini ti o wa fun iṣakoso ipele ti subwoofer amp
Awọn eto tunṣe nipasẹ Bluetooth® ninu ohun elo ẹrọ ọlọgbọn (tabulẹti tabi foonu alagbeka), ibaramu pẹlu awọn ẹrọ Android ati Apple mejeeji

Ka, kọ, ati tọju awọn atunto fun iranti ọjọ iwaju
Password-protect feature available in the mobile app

Micro-B USB imudojuiwọn

Awọn irinṣẹ & Awọn ẹya ẹrọ fifi sori ẹrọ ti a beere

Crimping ọpa ati awọn asopọ ti, tabi solder ibon, solder, ati ooru isunki

Teepu
Waya gige

Awọn asopọ Zip
Multimeter

AKIYESI: Pẹlu bọtini jade kuro ninu ina, ge asopọ ebute batiri odi ṣaaju fifi ọja yii sori ẹrọ. Rii daju pe gbogbo awọn asopọ fifi sori ẹrọ, paapaa awọn ina afihan apo afẹfẹ, ti wa ni edidi sinu rẹ ṣaaju ki o to so batiri naa pọ tabi gigun kẹkẹ ina lati ṣe idanwo ọja yii.

AKIYESI: Refer also to the instructions included with the aftermarket accessory before installing this device.

Fifi sori ẹrọ

Awọn aṣayan fifi sori ẹrọ

Adding a subwoofer to a factory system:
- This feature offers the ability to add a subwoofer to a non-amplified factory system. (Refer to Page 3)
Fifi kan ni kikun-ibiti o amp ati subwoofer si eto ile-iṣẹ kan:
- Ẹya yii nfunni ni agbara lati ṣafikun iwọn kikun amp and sub to a factory system on a non-amplified system. (Refer to Page 4)
- Akiyesi: The interface provides a 12-volt 1-amp iṣelọpọ lati tan ọja lẹhin ọja amp(awọn). Ti o ba nfi ọpọ sii amps, atunkọ ọkọ ayọkẹlẹ SPDT yoo nilo ti o ba jẹ pe amp tan-an lọwọlọwọ gbogbo amps ni idapo ju 1 lọ amp. Lo nọmba apakan Metra E-123 (ta lọtọ) fun awọn abajade to dara julọ.

Fifi sori ẹrọ

Yọ redio ile-iṣẹ kuro *, lẹhinna yọọ gbogbo awọn asopọ kuro.
Fi T-harness ọkọ AX-DSPX-GL10 sori ọkọ ki o ṣe gbogbo awọn asopọ pataki, ṣugbọn fi silẹ amp titan waya ti ge-asopọ.
Pulọọgi T-harness ọkọ AX-DSPX-GL10 si wiwo AX-DSPX-GL10.
Pulọọgi ijanu wiwo AX-DSPX-GL10 si wiwo AX-DSPX-GL10.
Ṣe igbasilẹ ati fi ohun elo AXDSP-X sori ẹrọ lati Ile itaja Google Play tabi Ile itaja App Apple.
Open the app then select the Bluetooth® Connection tab. Follow the instructions to pair the mobile device to the interface. Refer to Page 5 for more information.

Scroll to the Configuration tab then select the vehicle type. Press the Lock Down ** button to save the configuration. Refer to Page 6 for more information.
Sopọ awọn amp tan-lori waya.
Adjust the settings in the app as desired. Press the Lock Down button to save any new configurations.
- Tọkasi si metraonline.com for the dash disassembly. If Metra makes a dash kit for the vehicle, disassembly will be within those instructions.
- Anytime the interface is locked down, the key must be cycled off, then back on.

ADDING A SUBWOOFER TO A FACTORY SYSTEM

Fifi A FULL-ibiti o AMP & SUBI SI ETO ISE

MOBILE APP: QUICK SETUP STEPS THROUGH AXDSP-XL APP

Google Play itaja

Android 9 tabi ga julọ

Apple App itaja

iOS 12.1 tabi ga julọ

Download and install the AXDSP-XL App from the Google Play Store or Apple App Store.
Turn Vehicle Ignition on. Make sure the Remote Turn On lead is disconnected.

Open the app: Select Bluetooth® Connections page.
- Yan Ṣiṣayẹwo, gbogbo awọn ẹrọ AXDSP ti o wa laarin ibiti yoo han. Yan AXDSP rẹ ki o lu asopọ. (Aworan A)
Yan oju-iwe Iṣeto.
- Yan Aami Iru Ọkọ
- Select the Vehicle Make:____ (Example: CHEVROLET)
- Select the Vehicle’s model: ____ (Example: SILVERADO)
- Yan Pẹlu OE Amp or Without OE Amp
- Tẹ Waye (olusin B)
Rii daju pe iwọn didun redio ti wa ni isalẹ gbogbo.

Sopọ awọn amp turn-on wire from the AXDSPX-GL10 T-harness to the aftermarket ampalifiers.
From the Configuration page click the Identify button to confirm that the Locking Down Data AXDSPX-GL10 is connected properly. If so, a chime will be heard from the front left speaker.
Press the Lock Down button to save the configuration. (Do not turn the ignition off until this process is completed) (Figure C)

Select the Bluetooth® Configurations page and disconnect the DSPX.
Turn ignition off, close all doors, then lock the vehicle using the key fob. The vehicle will need to sit uninterrupted for 10 minutes while the vehicle goes to sleep. (Make sure the Key fob is 15 feet away from the vehicle)
Ṣii Ọkọ, tan ina ati idanwo awọn iṣẹ redio.

Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup Instructions tab, or online at Axxessinterfaces.com for an explanation of each tab in the app.

Last and most important: You MUST lock down your configuration and cycle the key!!!

AWỌN NIPA

Awọn pato

Input Impedance 1M Ohm
Awọn ikanni Input 6 Ipele giga / Kekere Selectable
Input Options: High Level or Low Level

Input Type Iyatọ-Iwontunwonsi
Iṣagbewọle Voltage: High Level Range 0 – 28 volts (Peak to Peak)
Iṣagbewọle Voltage: Low Level Range 0 – 4.9 volts (Peak to Peak)

Awọn ikanni Ijade 10
O wujade Voltage Up 5-volts RMS
Imudaniloju ijade 50 Ohms

Equalizer Iru 31 Band Graphic EQ, +/- 10dB
THD <0.03%
Idahun Igbohunsafẹfẹ 20Hz - 20kHz

Crossover 3-Way LPF, BPF, HPF, THP per channel
Crossover Type Linkwitz-Riley 24 dB Slope, Fixed
Sampling 48kHz

S/N ratio 105dB @ 5-folti RMS

Gbogboogbo

Awọn ọna Voltage 10 – 16-volts DC

Imurasilẹ lọwọlọwọ Iyaworan ~ 7mA
Isẹ lọwọlọwọ Fa ~ 150mA
Awọn atunṣe/Ohun elo idari nipasẹ Bluetooth®

Remote Output 12-volts DC (Signal Sense or with ignition)

ALAYE SIWAJU

Ọlọjẹ QR Code
- Awọn igbesẹ laasigbotitusita siwaju ati alaye le wa ni: axxessinterfaces.com/product/AXDSPX-GL10

Nini awọn iṣoro? A wa nibi lati ṣe iranlọwọ.
Kan si laini Atilẹyin Imọ-ẹrọ ni: 386-257-1187
Tabi nipasẹ imeeli ni:

techsupport@metra-autosound.com

Awọn wakati Atilẹyin Imọ-ẹrọ (Aago Iha Iwọ-oorun)

Monday - Friday: 9:00 AM - 7:00 PM

Saturday: 10:00 AM - 5:00 PM
Sunday: 10:00 AM - 4:00 PM
AxxessInterfaces.com

FAQs

Q: Do I need to disconnect the negative battery terminal before installing the product?
- A: Yes, it is recommended to disconnect the negative battery terminal with the key out of the ignition before installation. Ensure all connections are made before reconnecting the battery.
Q: How do I save configurations using the AXDSP-X app?
- A: In the app, navigate to the Configuration tab, select your vehicle type, adjust settings as desired, and press the Lock Down button to save the configurations.

Awọn iwe aṣẹ / Awọn orisun

AXXESS AXDSPX-GL10 Digital Signal Processor [pdf] Ilana itọnisọna
AXDSPX-GL10, AXDSPX-GL10 Digital Signal Processor, Digital Signal Processor, Signal Processor, Processor

Awọn itọkasi

Itọsọna olumulo

AXXESS AXDSPX-GL10 Digital Signal Processor

INTERFACE eroja

INTERFACE ẸYA