AXXESS AXDSPX-GL10 Bukana ea Tataiso ea Digital Signal Processor

Bakeng sa Litaelo tsa Dash Disassembly, sheba ho henline.net. Kenya selemo, etsa, le mohlala oa koloi ho Vehicle Fit Guide bakeng sa lisebelisoa tsa Radio Install.

www.MetraOnline.com

LITŠOANTŠISO KHOTHA.

Boemo ba chime bo fetolehang
Ho bonolo habonolo kamora ho kenya radio ka marapo a se nang mehala

Bass knob e kenyelelitsoe bakeng sa taolo ea boemo ba subwoofer amp
Litlhophiso tse fetotsoeng ka Bluetooth® ka sesebelisoa se bohlale (letlapa kapa mohala oa thekeng), se tsamaellanang le lisebelisoa tsa Android le Apple ka bobeli

Bala, ngola, 'me u boloke litokisetso bakeng sa ho hopola nakong e tlang
Password-protect feature available in the mobile app

Micro-B USB e ka nchafatsoa

Lisebelisoa le lisebelisoa tsa ho hlokeha lia hlokahala

Sesebelisoa sa crimping le li-connectors, kapa sethunya sa solder, solder, le mocheso o fokotseha

Theipi
Sehang terata

Maqhama a zip
Multimeter

TLHOKOMELO: Ka senotlolo sa ho tima, hakolla theminale e fosahetseng ea betri pele o kenya sehlahisoa sena. Netefatsa hore likhokahano tsohle tsa instola, haholo mabone a sesupo sa mokotla oa moea, li hokeloa pele o hokela betri bocha kapa o palamisa lebone ho leka sehlahisoa sena.

HLOKOMELA: Sheba hape litaelo tse kenyellelitsoeng le sehlomathiso sa aftermarket pele o kenya sesebelisoa sena.

KEKETSO

KHETHA MAKHETHA

Adding a subwoofer to a factory system:
- This feature offers the ability to add a subwoofer to a non-amplified factory system. (Refer to Page 3)
Ho kenyelletsa lethathamo le felletseng amp le subwoofer ho sistimi ea feme:
- Karolo ena e fana ka bokhoni ba ho kenyelletsa mofuta o felletseng amp and sub to a factory system on a non-amplified system. (Refer to Page 4)
- Hlokomela: The interface provides a 12-volt 1-amp khumo ho bulela aftermarket amp(s). Haeba u kenya multiple amps, ho tla hlokahala phetisetso ea makoloi ea SPDT haeba amp bulela hona joale ea bohle amps e kopantsoeng e feta 1 amp. Sebelisa karolo ea Metra ea nomoro ea E-123 (e rekisoang ka thoko) bakeng sa liphetho tse ntle.

KEKETSO

Tlosa seea-le-moea sa fektheri*, ebe u ntša lihokelo tsohle.
Kenya T-harness ea koloi ea AX-DSPX-GL10 koloing 'me u etse likhokahano tsohle tse hlokahalang, empa u e tlohele. amp terata ea ho bulela e hakolitsoe.
Hokela T-harness ea koloi ea AX-DSPX-GL10 ho sebopeho sa AX-DSPX-GL10.
Hokela sehokelo sa AX-DSPX-GL10 sehokelong sa AX-DSPX-GL10.
Khoasolla le ho kenya sesebelisoa sa AXDSP-X ho Google Play Store kapa Apple App Store.
Open the app then select the Bluetooth® Connection tab. Follow the instructions to pair the mobile device to the interface. Refer to Page 5 for more information.

Scroll to the Configuration tab then select the vehicle type. Press the Lock Down ** button to save the configuration. Refer to Page 6 for more information.
Connect the amp terata e bulelang.
Adjust the settings in the app as desired. Press the Lock Down button to save any new configurations.
- Sheba henline.net for the dash disassembly. If Metra makes a dash kit for the vehicle, disassembly will be within those instructions.
- Anytime the interface is locked down, the key must be cycled off, then back on.

HO KENYA SUBWOOFER HO SYSTEM EA FACTORY

HO EKETSA LEFOKO AMP & TLAS'A MOKHATLO OA Fektheri

MOBILE APP: MEHATO YA HO PETA KA POTLAKO KA AXDSP-XL APP

Google Play Store

Android 9 kapa ho feta

Apple App Store

iOS 12.1 kapa ho feta

Download and install the AXDSP-XL App from the Google Play Store or Apple App Store.
Turn Vehicle Ignition on. Make sure the Remote Turn On lead is disconnected.

Open the app: Select Bluetooth® Connections page.
- Khetha Scan, lisebelisoa tsohle tse fumanehang tsa AXDSP tse sebakeng sa marang-rang li tla hlahisoa. Khetha AXDSP ea hau ebe o tobetsa hokela. (Setšoantšo A)
Khetha leqephe la Configuration.
- Khetha Letšoao la Mofuta oa Koloi
- Select the Vehicle Make:____ (Example: CHEVROLET)
- Select the Vehicle’s model: ____ (Example: SILVERADO)
- Khetha Ka OE Amp kapa Ntle le OE Amp
- Tobetsa Sebelisa (setšoantšo sa B)
Etsa bonnete ba hore molumo oa seea-le-moea o theohile.

Connect the amp terata ea ho bulela ho tloha ho AXDSPX-GL10 T-harness ho ea ka mor'a 'maraka amplifiers.
From the Configuration page click the Identify button to confirm that the Locking Down Data AXDSPX-GL10 is connected properly. If so, a chime will be heard from the front left speaker.
Press the Lock Down button to save the configuration. (Do not turn the ignition off until this process is completed) (Figure C)

Select the Bluetooth® Configurations page and disconnect the DSPX.
Turn ignition off, close all doors, then lock the vehicle using the key fob. The vehicle will need to sit uninterrupted for 10 minutes while the vehicle goes to sleep. (Make sure the Key fob is 15 feet away from the vehicle)
Notlolla Koloi, ho bulela 'me u leke mesebetsi ea seea-le-moea.

Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup Instructions tab, or online at Axxessiinterfaces.com for an explanation of each tab in the app.

Last and most important: You MUST lock down your configuration and cycle the key!!!

LIEKETSENG TS'OANELO

Litlhaloso

Input Impedance 1M Ohm
Likanale tse Kenoang 6 Boemo bo phahameng/Botlase Boa khethoa
Input Options: High Level or Low Level

Mofuta oa Kenyeletso oa Phapang-E leka-lekaneng
Keletso Voltage: High Level Range 0 – 28 volts (Peak to Peak)
Keletso Voltage: Low Level Range 0 – 4.9 volts (Peak to Peak)

Likanale tse hlahisoang 10
Khumo Voltage Ho fihlela ho 5-volts RMS
Sephetho se Impedans 50 Ohms

Mofuta oa Equalizer 31 Band Graphic EQ, +/- 10dB
THD <0.03%
Karabelo ea Khafetsa 20Hz - 20kHz

Crossover 3-Way LPF, BPF, HPF, THP per channel
Crossover Type Linkwitz-Riley 24 dB Slope, Fixed
Sampbophahamo ba 48kHz

S/N Karolelano 105dB @ 5-volts RMS

Kakaretso

Tshebetso Voltage 10 – 16-volts DC

Draw ea Hona Joale e Emeng ~7mA
Ts'ebetso ea hona joale Draw ~ 150mA
Litokiso/Litaolo tsa ts'ebeliso ka Bluetooth®

Remote Output 12-volts DC (Signal Sense or with ignition)

LIEKETSENG EKETSEHILENG

Skena QR Code
- Mehato le lintlha tse ling tsa ho rarolla mathata li ka fumaneha ho: axxessiinterfaces.com/product/AXDSPX-GL10

O na le mathata? Re mona ho thusa.
Ikopanye le mohala oa rona oa Tech Support ho: 386-257-1187
Kapa ka lengolo-tsoibila ho:

techsupport@metra-autosound.com

Lihora tsa Tšehetso ea Tech (Nako e Tloaelehileng ea Bochabela)

Mantaha - Labohlano: 9:00 AM - 7:00 PM

Moqebelo: 10:00 AM - 5:00 PM
Sontaha: 10:00 AM - 4:00 PM
Kamohelong.com

FAQs

P: Na ke hloka ho hakolla terminal e fosahetseng ea betri pele ke kenya sehlahisoa?
- A: Yes, it is recommended to disconnect the negative battery terminal with the key out of the ignition before installation. Ensure all connections are made before reconnecting the battery.
P: Ke boloka litlhophiso joang ka sesebelisoa sa AXDSP-X?
- A: In the app, navigate to the Configuration tab, select your vehicle type, adjust settings as desired, and press the Lock Down button to save the configurations.

Litokomane / Lisebelisoa

AXXESS AXDSPX-GL10 Digital Signal Processor [pdf] Buka ea Taelo
AXDSPX-GL10, AXDSPX-GL10 Digital Signal Processor, Digital Signal Processor, Signal Processor, Processor

Litšupiso

Bukana ea Mosebelisi

AXXESS AXDSPX-GL10 Digital Signal Processor

SEBAKA MAKATSO

SEBAKA TSOHLE