AXXESS AXDSPX-GL10 Ihe nrụpụta mgbama dijitalụ

Akụkụ INTERFACE

• AXDSPX-GL10 interface
• AXDSPX-GL10 interface njikota
• T-harness ụgbọ ala AXDSPX-GL10
• Akara bass

Ngwa

• Gaa leta Axxessinterfaces.com maka ndepụta ngwa ugbu a

Interface GM DSP nwere eriri ikuku tupu 2016-2019

IHE NDỊ MMADỤ NTỤTA

• Ezubere maka ndị na-abụghịampụdị dị elu
• Gụnyere DSP (Onye Nhazi Mgbama Dijitalụ)
• Selectable 31-band graphic EQ or 5 5-band parametric EQ
• Mpụta 10 ekenye n'otu n'otu
• Nhata nke onwe na nke ọ bụla n'ime ihe iri a
• Independent high-pass, low-pass, and band-pass filters
• Enwere ike igbu oge ọwa ọ bụla n'onwe ya ruo 10ms
• Nchọpụta igbutu na ịmachi sekit
• Na-ejigide chimes ụlọ ọrụ na-adọba ụgbọala
• Retains OnStar® voice prompts (Features continued on next page)

Maka ntuziaka Dissembly Dash, rụtụ aka metraonline.com. Tinye afọ, mee, na ụdị ụgbọ ala n'ime ntuziaka dabara adaba maka ngwa nrụnye redio.

• www.MetraOnline.com

Njiri mara.

• Ọkwa chime na-agbanwe agbanwe
• Ọ dị mfe n'azụ nrụnye redio na eriri ejikọrọ ụzọ
• Bass knob gụnyere maka njikwa larịị nke subwoofer amp
• A na-ahazi ntọala site na Bluetooth® na ngwa smart ngwaọrụ (mbadamba ma ọ bụ ekwentị mkpanaaka), dakọtara na ma ngwaọrụ gam akporo na Apple.
• Gụọ, dee ma chekwaa nhazi maka ncheta n'ọdịnihu
• Password-protect feature available in the mobile app
• Micro-B USB nwere ike imelite

Achọrọ akụrụngwa & ngwa nrụnye

• Ngwá ọrụ crimping na njikọ, ma ọ bụ égbè a na-ere ere, ihe na-ere ihe, na okpomọkụ na-ebelata
• teepu
• Waya cutter
• Njikọ zip
• Multimeter

Ntị: Ka igodo si na mgbanye, kwụpụ ọdụ batrị na-adịghị mma tupu ị wụnye ngwaahịa a. Gbaa mbọ hụ na etinyere njikọ nrụnye niile, ọkachasị ọkụ ihe ngosi akpa ikuku, tupu ị jikọọ batrị ma ọ bụ ịgbanye igwe mgbanye iji nwalee ngwaahịa a.

IHE: Rụtụ aka na ntuziaka ndị gụnyere ngwa ahịa azụmaahịa tupu ịwụnye ngwaọrụ a.

Ịwụnye

Nhọrọ nkwụnye

• Adding a subwoofer to a factory system:
  • This feature offers the ability to add a subwoofer to a non-amplified factory system. (Refer to Page 3)
• Na-agbakwụnye ihe zuru oke amp na subwoofer na sistemụ mmepụta ihe:
  • Njirimara a na-enye ikike ịgbakwunye ihe zuru oke amp and sub to a factory system on a non-amplified system. (Refer to Page 4)
  • Rịba ama: The interface provides a 12-volt 1-amp mmepụta iji gbanye aftermarket amp(s). Ọ bụrụ na ị na-etinye ọtụtụ amps, a ga-achọgharị ụgbọ ala SPDT ma ọ bụrụ na amp turn-on ugbu a niile amps jikọtara gafere 1 amp. Jiri nọmba akụkụ Metra E-123 (erere iche) maka nsonaazụ kacha mma.

Ịwụnye

1. Wepu redio ụlọ ọrụ *, wee wepụ njikọ niile.
2. Wụnye T-harness ụgbọ ala AX-DSPX-GL10 na ụgbọ ala wee mee njikọ niile dị mkpa, mana hapụ ya. amp ekwenyere waya gbanye.
3. Tinye T-harness ụgbọ ala AX-DSPX-GL10 na interface AX-DSPX-GL10.
4. Tinye eriri interface AX-DSPX-GL10 na interface AX-DSPX-GL10.
5. Budata ma wụnye ngwa AXDSP-X na Google Play Store ma ọ bụ Apple App Store.
6. Open the app then select the Bluetooth® Connection tab. Follow the instructions to pair the mobile device to the interface. Refer to Page 5 for more information.
7. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down ** button to save the configuration. Refer to Page 6 for more information.
8. Jikọọ amp agbanye waya.
9. Adjust the settings in the app as desired. Press the Lock Down button to save any new configurations.
   • Tụtụ aka na metraonline.com for the dash disassembly. If Metra makes a dash kit for the vehicle, disassembly will be within those instructions.
   • Anytime the interface is locked down, the key must be cycled off, then back on.

Ịgbakwunye SUBWOOFER na usoro ụlọ ọrụ

NA-agbakwụnye ihe zuru oke AMP & N'okpuru usoro mmepụta ihe

Ngwa mkpanaka: Nhazi ngwa ngwa site na AXDSP-XL APP

Ụlọ ahịa Google Play

Android 9 ma ọ bụ karịa

Ụlọ ahịa Apple App

iOS 12.1 ma ọ bụ karịa

1. Download and install the AXDSP-XL App from the Google Play Store or Apple App Store.
2. Turn Vehicle Ignition on. Make sure the Remote Turn On lead is disconnected.
3. Open the app: Select Bluetooth® Connections page.
   • Họrọ nyocha, ngwaọrụ AXDSP niile dị n'ime oke ga-egosipụta. Họrọ AXDSP gị wee pịa jikọọ. (Foto A)
4. Họrọ ibe nhazi.
   • Họrọ akara ngosi Ụdị ụgbọ ala
   • Select the Vehicle Make:____ (Example: CHEVROLET)
   • Select the Vehicle’s model: ____ (Example: SILVERADO)
   • Họrọ na OE Amp ma ọ bụ enweghị OE Amp
   • Kụta Ngwa (ọgụgụ B)
5. Gbaa mbọ hụ na olu redio agbadala.
6. Jikọọ amp waya na-atụgharị site na AXDSPX-GL10 T-harness ruo n'ahịa ahịa ampndị na -enye ndụ.
7. From the Configuration page click the Identify button to confirm that the Locking Down Data AXDSPX-GL10 is connected properly. If so, a chime will be heard from the front left speaker.
8. Press the Lock Down button to save the configuration. (Do not turn the ignition off until this process is completed) (Figure C)
9. Select the Bluetooth® Configurations page and disconnect the DSPX.
10. Turn ignition off, close all doors, then lock the vehicle using the key fob. The vehicle will need to sit uninterrupted for 10 minutes while the vehicle goes to sleep. (Make sure the Key fob is 15 feet away from the vehicle)
11. Mepee ụgbọ ala, gbanye ma nwalee ọrụ redio.
12. Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup Instructions tab, or online at Axxessinterfaces.com for an explanation of each tab in the app.

Last and most important: You MUST lock down your configuration and cycle the key!!!

Nkọwapụta

Nkọwapụta

• Ntinye Ntinye 1M Ohm
• Ọwa ntinye 6 Ọkwa dị elu / dị ala a na-ahọrọ
• Input Options: High Level or Low Level
• Ụdị ntinye dị iche- Kwesịrị ekwesị
• Ntinye Voltage: High Level Range 0 – 28 volts (Peak to Peak)
• Ntinye Voltage: Low Level Range 0 – 4.9 volts (Peak to Peak)
• Ọwa mmepụta 10
• Mmepụta Voltage ruo 5-volts RMS
• Mmepụta impedance 50 Ohms
• Ụdị ihe nhata 31 Band Eserese EQ, +/- 10dB
• THD <0.03%
• Nzaghachi ugboro ugboro 20Hz - 20kHz
• Crossover 3-Way LPF, BPF, HPF, THP per channel
• Crossover Type Linkwitz-Riley 24 dB Slope, Fixed
• Samp48kHz
• Oke S/N 105dB @ 5-volts RMS

Izugbe

• Nrụ ọrụ Voltage 10 – 16-volts DC
• Ihe osise dị ugbu a ~7mA
• Ihe osise dị ugbu a ~ 150mA
• Ngwa mmezi/njikwa site na Bluetooth®
• Remote Output 12-volts DC (Signal Sense or with ignition)

Ozi ndị ọzọ

• Nyocha Usoro QR
  • Enwere ike ịchọta usoro nchọpụta nsogbu na ozi na: axxessinterfaces.com/product/AXDSPX-GL10
• Inwe ihe isi ike? Anyị bịara ebe a iji nyere aka.
• Kpọtụrụ ahịrị nkwado teknụzụ anyị na: 386-257-1187
• Ma ọ bụ site na email na:
• techsupport@metra-autosound.com

Oge Nkwado Teknụzụ (Oge Ọwụwa Anyanwụ Ọwụwa Anyanwụ)

• Monday - Fraịdee: 9:00 ụtụtụ - 7:00 ehihie
• Satọde: 10:00 ụtụtụ - 5:00 ehihie
• Sọnde: 10:00 ụtụtụ - 4:00 ehihie
• AxxessInterfaces.com

Ajụjụ

• Ajụjụ: Ọ dị m mkpa ịkwụpụ ọdụ batrị na-adịghị mma tupu ị wụnye ngwaahịa ahụ?
  • A: Yes, it is recommended to disconnect the negative battery terminal with the key out of the ignition before installation. Ensure all connections are made before reconnecting the battery.
• Ajụjụ: Kedu ka m ga-esi chekwaa nhazi site na iji ngwa AXDSP-X?
  • A: In the app, navigate to the Configuration tab, select your vehicle type, adjust settings as desired, and press the Lock Down button to save the configurations.

Akwụkwọ / akụrụngwa

AXXESS AXDSPX-GL10 Ihe nrụpụta mgbama dijitalụ [pdf] Akwụkwọ ntuziaka AXDSPX-GL10, AXDSPX-GL10 Ihe Nhazi Mgbama Dijitalụ, Ihe Nhazi Mgbama Dijitalụ, Ihe Nhazi Mgbama, Onye Nhazi

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ