ISISOMBULULO SOKUKHANYA 186780 Inkqubo yokuLungiselela i-Streetlight Drivers usebenzisa iProgrammer Streetlight User Manual

iPROGRAMMER STREETLIGHT SOFTWARE

IINKCUKACHA ZAJIKELELE

I-"iProgrammer Streetlight Software" kunye nesixhobo sayo sokucwangcisa "iProgrammer Streetlight" ivumela uqwalaselo olulula nolukhawulezayo lweeparamitha zokusebenza kunye nokudluliselwa kwedatha (ucwangciso) kumqhubi, njongo leyo umqhubi kufuneka aqhawukene kuyo nayiphi na ivolthi.tagUkubonelela.

Ulungelelwaniso lweeparamitha zokusebenza ezifana nemveliso yangoku (mA), i-CLO okanye amanqanaba obumnyama kwenziwa kusetyenziswa i-“iProgrammer Streetlight Software” yeVossloh-Schwabe. Isixhobo se-iProgrammer Streetlight siqhagamshelwe kumqhubi nge-USB drive kunye nePC enemigca emibini yedatha.

Uqwalaselo lwesoftware kunye nenkqubo ngokwayo inokuqhutywa kuphela emva kokuqhawula uqhagamshelo olusuka kumthamo omkhulu.tage.
Ukukwazi ukugcina ezininzi zoqwalaselo profiles yenza inkqubo ibe bhetyebhetye kakhulu, nto leyo eyenza ukuba abavelisi baphendule ngokukhawuleza kwiimfuno zabathengi.

Ukuya kuthi ga kwiiparamitha ezine zokusebenza kunokusetwa kwaye kugcinwe.

1. Isiphumo:
   Ulawulo lomntu ngamnye lwemveliso yangoku (Isiphumo) kwi-ma.
2. Umsebenzi woMzizi (0–10V okanye ukuncipha kwamanyathelo ama-5):
   Umqhubi unokuqhutywa ngeendlela ezimbini ezahlukeneyo zokudima: mhlawumbi nge-interface ye-0-10 V okanye nge-5-step timer.
3. Imodyuli yoKhuseleko lweThermal (NTC):
   I-interface ye-NTC ibonelela ngokukhuselwa kwe-thermal kwiimodyuli ze-LED ngokuqalisa ukunciphisa okwangoku xa kufunyanwa amaqondo obushushu abalulekileyo. Kungenjalo, ukunciphisa ubushushu kunokuqwalaselwa kusetyenziswa isixhasi sangaphandle se-NTC esiqhagamshelwe kumqhubi.
4. Ukuphuma kweLumen rhoqo (CLO):
   Imveliso ye-lumen yemodyuli ye-LED iyancipha ngokuthe ngcembe ngexesha lobomi bayo benkonzo. Ukuqinisekisa ukukhutshwa kwe-lumen rhoqo, imveliso yegiya yolawulo kufuneka yonyuswe kancinci kancinci ngexesha lenkonzo yobomi bemodyuli.

PHEZULUVIEW YOSEKO LWENKQUBO

• Ikhompyuter enojongano lwe-USB kunye nesoftware yokucwangcisa ukuseta iiparamitha zokusebenza kubaqhubi beVS
  
• Isixhobo seprogram ye-iProgrammer Streetlight 186780
  
• VS umqhubi wesitrato
  

IINKCUKACHA ZOBUGCISA KUNYE NAMANQAKU

iProgrammer Streetlight

iProgrammer Streetlight	186780
Imilinganiselo (LxWxH)	165 x 43 x 30 mm
Uluhlu lobushushu	0 ukuya ku-40 °C (ubuninzi. 90% rh)
Umsebenzi	Ukuthumela nokwamkela useto

Ulwazi ngoKhuseleko

• Nceda ujonge umonakalo kwisixhobo phambi kokuba usisebenzise. Isixhobo kufuneka singasetyenziswa ukuba i-casing yonakalisiwe. Isixhobo kufuneka emva koko silahlwe ngendlela efanelekileyo.
• Izibuko le-USB lenzelwe kuphela ukusebenzisa isixhobo se-iProgrammer Streetlight (USB 1/USB 2). Ukufaka iintambo ezingezizo eze-USB okanye izinto zokuqhuba akuvumelekanga kwaye kunokonakalisa isixhobo. Ungaze usebenzise ifowuni kwiindawo ezifumileyo okanye ezibeka umngcipheko wogqabhuko-dubulo.
• Ungaze usebenzise isixhobo ngayo nayiphi na injongo ngaphandle kwaleyo yenzelwe yona, oko kukuthi ukuqwalasela izixhobo zokulawula i-VS.
• Isixhobo kufuneka siqhawulwe kwi-mains voltage ngexesha lenkqubo

INTSHAYELELO

Khuphela iSoftware

I-iProgrammer Streetlight Software inokukhutshelwa ngokusebenzisa eli khonkco lilandelayo: www.vossloh-schwabe.com

Ifestile:

Mfutshane Overview

Lo mfanekiso ulandelayo (Ifestile A) ibonelela nge-overview yefestile yokusebenza yesoftware.

UKUSEBENZA KWESOFTWARE NGENGCACISO

Oku kulandelayo kusebenza ukuchaza ukusebenza kwesoftware kunye noqwalaselo ngamanyathelo amathathu.

Yenza ukuseta inkqubo

Nje ukuba isoftware ikhutshelwe ngempumelelo kwaye ifakwe, ukusetwa kwenkqubo kufuneka kuqhutywe (jonga kwiphepha lesi-3). Ukongeza kwisoftware, isixhobo seprogram ye-iProgrammer Streetlight kunye nomqhubi weVS Streetlight zizinto eziyimfuneko ngakumbi.

Okokuqala, faka isixhobo seprogram ye-iProgrammer Streetlight kwizibuko le-USB lasimahla kwikhompyuter yakho, emva koko uqhagamshele i-iProgrammer Streetlight kunye nomqhubi we-Streetlight ohambelanayo.

Imiyalelo yokhuseleko (jonga kwiphepha 3) kufuneka iqwalaselwe xa usebenzisa izixhobo. Nje ukuba la manyathelo okulungiselela ethathiwe, isoftware inokuqaliswa.

Kukho iindlela ezimbini zokuqalisa:

1. Ukusetyenziswa kokuqala:
   Qala ngeesethingi ezintsha
2. Ukusetyenziswa okuphindaphindiweyo:
   Qala ngokuvula iisetingi esele zigciniwe/files (“Layisha iProfile”/”Funda”)

Ukukhetha umqhubi
Ukuqala, umqhubi onqwenela ukumcwangcisa kufuneka abonwe yisoftware. Ngokukhawuleza ukuba isixhobo sifunyenwe inombolo yereferensi ehambelana nayo iya kuboniswa kwaye umbala wesignali eluhlaza uya kuvela.

Ukuba akukho mqhubi ufunyenweyo, umbala wesignali uya kuba bomvu. Nceda khangela ukuba umqhubi uqhagamshelwe ngokufanelekileyo kwaye usebenzisa umqhubi ohambelanayo. Abaqhubi abahambelanayo babonisiwe kuluhlu.

Ulungelelwaniso esele lusetyenziwe lungalayishwa ngesandla.

Ukuqwalasela iiparamitha ezi-4

Nje ukuba isoftware idityaniswe ngempumelelo kunye ne-iProgrammer Streetlight, uqwalaselo lunokwenziwa.

Iiparamitha zomqhubi zinokufumaneka kwindawo ethi "Ulwazi".
Ukucwangciswa kweeparamitha kuqhutyelwa kwintsimi yokusebenza efanelekileyo.

Imveliso yemimiselo yangoku

Unokukhetha phakathi kwezicwangciso ezimbini zemveliso yangoku (mA) yomqhubi, njongo leyo imida (mA) yomqhubi okhethiweyo ichaziwe. Isicwangciso singenziwa ngokungena ngqo okanye ngokunqakraza kwiintolo. Ukuvula ibhokisi yokulawula ethi "Khetha ngoku (mA)" kuya kukuvumela ukuba usethe imveliso yangoku kwi-50 mA amanyathelo, ngelixa uvula "I-Custom Setting (mA)" iya kukuvumela ukuba usethe imveliso yangoku kwi-1 mA amanyathelo.

Umsebenzi wokuncipha (0–10 V iNyathelo-Dim isibali-xesha)

Umqhubi unokuqhutywa ngeendlela ezimbini ezahlukeneyo ze-dimmer.

Ukucofa kwibhokisi yolawulo “0–10 V Dim Function” kuya kusebenzisa ezinye iinketho ezimbini zokuseta, nokuba yi “Dim To Off” okanye “Min. Dim”. Ngo "Dim To Off", umda osezantsi uchaziwe (min. 10%); ukuba ixabiso lehla ngaphantsi kwalo mda usezantsi, umqhubi uya kutshintshela kwimo yokulinda. Ukuba “UMz. Dim” yenziwe yasebenza, imveliso yangoku isala kubuncinane obuchaziweyo bolungiselelo lwedimmer, nokuba amaxabiso awela ngaphantsi kowona mthamo uphantsi wodimming vol.tage, oko kukuthi ukukhanya kuya kuba luzizi, kodwa kungacinywa. Isiqalo kunye nesiphelo samaxabiso evolthi yokunciphatage inokumiselwa ngokwahlukeneyo.

Ukongeza, zombini uqwalaselo lunokuba viewed kwaye ilungelelaniswe kumzobo ngokunqakraza kwi
Iqhosha elithi “Bonisa iCurve”.

Ngaphaya koko, umzobo we "Step-Dim Timer" ikuvumela ukuba usete amanqanaba ama-5 obumnyama usebenzisa isibali-xesha. Endaweni yomsebenzi wokunciphisa u-“0–10 V”, isibali-xesha esinamanyathelo amaninzi sinokusetyenziswa. Ukuza kuthi ga ngoku, nceda ukhethe umsebenzi we-"Step-Dim Timer" uze uvule iisetingi iinketho ngokucofa ku-"Show Curve". Amanyathelo amahlanu okufiphaza anokusetwa, kunye namanyathelo anokubakho ukusuka phakathi kwe-1 kunye ne-4 iiyure. Inqanaba lobumnyama linokusetwa kwiipesenti ezi-5 phakathi kwe-10 kunye ne-100%.
Ukuvuselela umsebenzi othi "Output Override" uya kubuyisela ngokufutshane amanqanaba okukhanyisa ukuya kwi-100% ukuba i-sensor yentshukumo nayo iqhagamshelwe.
Isetingi ethi "Power On Time" ikuvumela ukuba uhambise umzobo ukuze uphuculwe viewnge.

Izicwangciso zeParameter

• Min. inqanaba lobumnyama: 10…50%
• Qala ukufiphala voltage: 5…8.5 V
• Yeka ukufiphala voltage: 1.2…2 V

Phawula
Amaxesha abonisiweyo akabhekiseli kumaxesha okwenene osuku, kodwa asetyenziselwa imizekeliso kuphela

Umsebenzi wokukhusela ubushushu kwiimodyuli ze-LED (NTC)

Iimodyuli ze-LED zinokukhuselwa ngokugqithiswa ngokudibanisa i-NTC kumqhubi, ekugqibeleni umsebenzi kufuneka usebenze kwaye uluhlu olufanelekileyo lokumelana kufuneka luchazwe. Elona nqanaba lisezantsi lobumnyama lingamiselwa ngokwepesenti.

Amaxabiso afanelekileyo anokusetwa kumzobo.

Ukuphuma kweLumen rhoqo (CLO)

Lo msebenzi uyenziwa ukuba usebenze ngokungagqibekanga. Ukuqinisekisa ukukhutshwa kwe-lumen rhoqo, imveliso yegiya yokulawula inokunyuswa kancinci kancinci ngexesha lobomi benkonzo. Ukucofa kwibhokisi yolawulo kuya kukuvumela ukuba usete kumanqanaba okukhanya ayi-8 (%) ngaphezulu kweeyure eziyi-100,000.

Umzobo ubonisa oku.

Ukuvuselela umsebenzi wokuphela koBomi

Umsebenzi wokuphela kobomi uyenziwa ukuba usebenze ngokungagqibekanga. Ukuba kuvuliwe, ukukhanya kwisixhobo kuya kukhanyisa amaxesha e-3 ukuba ubomi benkonzo enkulu yeeyure ze-50,000 bufikeleleke xa ifowuni ivuliwe.

Ukugcina kunye noTshintsho lweDatha

Iyagcina
Nje ukuba ugqibe uqwalaselo ngempumelelo, uqwalaselo profile inokugcinwa kwindawo oyikhethileyo phantsi ko “Gcina iProfile”.

Ukucwangcisa
Nje ukuba uqwalaselo lugqitywe, amaxabiso eparameter angagqithiselwa kumqhubi lowo.

Ukucwangcisa amaxabiso eparameter, nqakraza kwi "Program", apho zonke iiparameters ezisebenzayo ziya kudluliselwa kwaye kuya kuvela isiqinisekiso.

Ukucwangcisa omnye umqhubi ngezicwangciso ezifanayo, vele ukhuphe uqhagamshelwano lomqhubi ocwangcisiweyo kwaye uqhagamshele omnye.
Udweliso lwenkqubo luzakuqala ngokuzenzekelayo ngaphandle kokufuna enye iqhosha.

Funda
"Funda uMsebenzi" kukuvumela ukuba ufunde uqwalaselo lomqhubi.
Amaxabiso azakuvela kwindawo esebenza ngokufanelekileyo xa kucofa u-"Funda".

Phawula: Ukucofa kwi "Seta kwakhona iXesha lokuSebenza" kuya kusetha kwakhona ixesha lokusebenza langaphambili lesixhobo.

Nanini na xa ukukhanya kombane kuqhubeka kwihlabathi jikelele, iVossloh-Schwabe kusenokwenzeka ukuba yenze igalelo elibalulekileyo ekuqinisekiseni ukuba yonke into isebenza ngokutshintshatshintshayo.

Ikomkhulu eJamani, iVosslohSchwabe ibala njengenkokeli yetekhnoloji ngaphakathi kwecandelo lokukhanyisa. Umgangatho ophezulu, iimveliso eziphezulu zenza isiseko sempumelelo yenkampani.

Ipotfoliyo yemveliso yeVossloh-Schwabe ebanzi igubungela onke amacandelo okukhanyisa: Iinkqubo ze-LED ezineeyunithi zokulawula ezihambelanayo, iinkqubo ezisebenza kakuhle kakhulu, iinkqubo zolawulo lwangoku (LiCS) kunye neebhola zombane kunye nemagnethi kunye ne-l.ampabanini.

Ikamva lenkampani kukuKhanya okuSmart

Vossloh-Schwabe Deutschland GmbH
Wasenstraße 25. 73660 Urbach · eJamani
Ifowuni +49 (0) 7181 / 80 02-0
www.vossloh-schwabe.com

Onke amalungelo agciniwe © Vossloh-Schwabe
Iifoto: Vossloh-Schwabe
Utshintsho lobuchwephesha lunokutshintsha ngaphandle kwesaziso
iProgrammer Streetlight Software EN 02/2021

Amaxwebhu / Izibonelelo

ISISOMBULULO SOKUKHANYISA 186780 Inkqubo ye-Streetlight Drivers usebenzisa iProgrammer Streetlight [pdf] Incwadi yokusebenzisa 186780 Programming Streetlight Drivers usebenzisa iProgrammer Streetlight, 186780, Programming Streetlight Drivers usebenzisa iProgrammer Streetlight

Iimbekiselo

• Incwadi yokusebenzisa