LIGHTING SOLUTION 186780 Programming Streetlight Drivers siv iProgrammer Streetlight User Manual

iPROGRAMMER STREETLIGHT SOFTWARE

Cov ntaub ntawv dav dav

Lub "iProgrammer Streetlight Software" nrog nws cov khoom sib xws "iProgrammer Streetlight" programming device ua kom yooj yim thiab ceev kev teeb tsa ntawm kev ua haujlwm tsis zoo nrog rau cov ntaub ntawv hloov pauv (kev pab cuam) rau tus tsav tsheb, rau lub hom phiaj twg tus tsav tsheb yuav tsum raug txiav tawm ntawm ib qho vol.tage khoom.

Kev teeb tsa ntawm cov kev khiav hauj lwm tsis xws li cov zis tam sim no (mA), CLO lossis qib dimming yog siv los ntawm Vossloh-Schwabe's "iProgrammer Streetlight Software". Lub iProgrammer Streetlight ntaus ntawv txuas nrog tus tsav tsheb ntawm USB tsav thiab lub PC nrog ob kab ntaub ntawv.

Kev teeb tsa ntawm lub software nrog rau cov programming nws tus kheej tuaj yeem nqa tawm tsuas yog tom qab txiav tawm ntawm lub mains vol.tage.
Muaj peev xwm txuag tau ob peb configuration profiles ua rau lub kaw lus hloov tau yooj yim, uas nyob rau hauv lem cia manufacturers teb sai sai rau cov neeg yuav tsum tau.

Txog li plaub qhov kev khiav hauj lwm tsis tuaj yeem raug teeb tsa thiab khaws cia.

1. Cov zis:
   Kev tswj tus kheej ntawm cov zis tam sim no (Cov zis) hauv mA.
2. Dimming Function (0-10V lossis 5-kauj ruam dimming):
   Tus tsav tsheb tuaj yeem ua haujlwm nrog ob qhov sib txawv dimming qhov chaw: txawm tias nrog 0-10 V interface lossis nrog 5-kauj ruam timer.
3. Module Thermal Protection (NTC):
   NTC interface muab kev tiv thaiv thermal rau LED modules los ntawm kev ua kom txo qis tam sim no thaum kub tseem ceeb. Xwb, txo qhov kub thiab txias tuaj yeem teeb tsa siv lub NTC resistor sab nraud txuas nrog tus tsav tsheb.
4. Constant Lumen Output (CLO):
   Lub lumen tso zis ntawm ib qho LED module txo qis dua nyob rau hauv nws cov kev pab cuam lub neej. Txhawm rau lav qhov tso tawm lumen tas li, qhov tso zis ntawm cov iav tswj yuav tsum tau maj mam nce ntxiv nyob rau hauv chav kawm ntawm qhov kev pab cuam lub neej.

TshajVIEW NTAWM SYSTEM SETUP

• Khoos phis tawj nrog USB interface thiab programming software los teeb tsa kev ua haujlwm rau VS tsav tsheb
  
• iProgrammer Streetlight programming ntaus ntawv 186780
  
• VS streetlight driver
  

TECHNICAL DETAILS THIAB CEEB TOOM

iProgrammer Streetlight

iProgrammer Streetlight	186780
Qhov Loj (LxWxH)	165 x 43 x 30 mm
Qhov kub thiab txias	0 txog 40 ° C (max. 90% rh)
Muaj nuj nqi	Xa thiab txais kev teeb tsa

Cov ntaub ntawv kev nyab xeeb

• Thov xyuas lub cuab yeej puas ua ntej siv nws. Cov cuab yeej yuav tsum tsis txhob siv yog tias lub casing puas lawm. Tom qab ntawd lub cuab yeej yuav tsum tau muab pov tseg kom tsim nyog.
• Qhov chaw nres nkoj USB tsuas yog tsim los ua haujlwm ntawm iProgrammer Streetlight ntaus ntawv (USB 1 / USB 2). Ntxig tsis-USB cables lossis cov khoom siv hluav taws xob tsis raug tso cai thiab tuaj yeem ua rau lub cuab yeej puas. Tsis txhob siv lub cuab yeej nyob rau hauv ib puag ncig uas ntub los yog ua rau muaj kev pheej hmoo ntawm kev tawg.
• Tsis txhob siv lub cuab yeej rau lwm lub hom phiaj uas tsis yog qhov uas nws tau tsim, uas yog los teeb tsa VS tswj iav.
• Cov cuab yeej yuav tsum raug txiav tawm ntawm lub mains voltage thaum programming

Taw qhia

Download tau lub Software

Lub iProgrammer Streetlight Software tuaj yeem rub tawm ntawm qhov txuas hauv qab no: www.vossloh-schwabe.com

Qhov rai:

Luv luvview

Cov duab hauv qab no (Qhov rai A) muab ib qho dhauview ntawm lub qhov rais ua haujlwm software.

SOFTWARE kev ua haujlwm hauv kev nthuav dav

Cov hauv qab no ua haujlwm los piav qhia txog kev ua haujlwm software thiab teeb tsa hauv peb kauj ruam.

Txhim kho qhov system

Thaum cov software tau ua tiav tiav thiab rub tawm, kev teeb tsa yuav tsum tau ua (saib nplooj 3). Ntxiv rau qhov software, iProgrammer Streetlight programming device thiab VS Streetlight tsav tsheb yog qhov yuav tsum tau ua ua ntej.

Ua ntej tshaj plaws, ntxig iProgrammer Streetlight programming ntaus ntawv mus rau hauv ib qho chaw nres nkoj USB dawb ntawm koj lub computer, tom qab ntawd txuas lub iProgrammer Streetlight nrog rau tus tsav tsheb Streetlight.

Cov lus qhia txog kev nyab xeeb (saib p.3) yuav tsum tau ua raws li thaum siv cov khoom siv. Thaum cov kauj ruam no tau ua tiav, cov software tuaj yeem pib.

Muaj ob txoj hauv kev los pib:

1. Thawj siv:
   Pib nrog kev teeb tsa tshiab
2. Rov siv dua:
   Pib los ntawm kev qhib qhov chaw khaws tseg lawm /files (“Load Profile"/"Nyeem")

Kev xaiv tsav tsheb
Yuav pib nrog, tus tsav tsheb uas koj xav mus rau qhov program yuav tsum tau lees paub los ntawm software. Thaum lub cuab yeej tau pom tus lej cuam tshuam yuav tshwm sim thiab lub teeb liab ntsuab yuav tshwm sim.

Yog tsis pom tus tsav tsheb, lub teeb liab xim yuav liab. Thov xyuas seb tus tsav tsheb puas tau txuas nrog thiab seb koj puas siv tus tsav tsheb sib tw. Cov tsav tsheb sib txuam tau pom hauv daim ntawv teev npe.

Configurations uas twb tau ua hauj lwm rau yuav loaded manually.

Configuring 4 parameters

Thaum lub software tau ua tiav ua ke nrog iProgrammer Streetlight, kev teeb tsa tuaj yeem ua tiav.

Tus neeg tsav tsheb qhov tsis muaj peev xwm tuaj yeem pom hauv "Cov Ntaub Ntawv" teb.
Lub configuration ntawm cov tsis yog ua nyob rau hauv lub luag hauj lwm teb.

Tso zis tam sim no nqis

Koj tuaj yeem xaiv ntawm ob qhov chaw rau cov zis tam sim no (mA) ntawm tus tsav tsheb, rau lub hom phiaj twg qhov txwv (mA) ntawm tus tsav xaiv tau teev tseg. Qhov kev teeb tsa tuaj yeem ua los ntawm kev nkag ncaj qha lossis los ntawm txhaj rau cov xub. Ua kom lub "Xaiv Tam Sim No (mA)" tswj lub npov yuav cia koj teeb tsa cov zis tam sim no hauv 50 mA cov kauj ruam, thaum ua kom "Custom Setting (mA)" yuav cia koj teeb tsa cov zis tam sim no hauv 1 mA cov kauj ruam.

Dimming muaj nuj nqi (0-10V Kauj ruam-Dim Timer)

Tus tsav tsheb tuaj yeem ua haujlwm nrog ob qhov sib txawv dimmer nqis.

Nyem rau ntawm lub thawv tswj ntawm "0-10 V Dim Function" yuav qhib ob qho kev xaiv ntxiv, xws li "Dim To Off" lossis "Min. Dim". Nrog "Dim To Off", qhov txwv qis yog teev tseg (min. 10%); yog tias tus nqi poob qis dua qhov kev txwv qis, tus neeg tsav tsheb yuav hloov mus rau hom standby. Yog tias "Min. Dim" tau qhib, cov zis tam sim no tseem nyob ntawm qhov kev teeb tsa yam tsawg kawg nkaus dimmer, txawm tias qhov tseem ceeb poob qis dua qhov tsawg kawg nkaus dimming vol.tage, piv txwv li, teeb pom kev zoo yuav dimmed, tab sis tsis hloov tawm. Qhov pib thiab qhov kawg ntawm qhov dimming voltage tuaj yeem teem caij sib cais.

Tsis tas li ntawd, ob qho tib si configurations tuaj yeem ua tau viewed thiab kho nyob rau hauv ib daim duab los ntawm txhaj rau lub
"Show Curve" khawm.

Tsis tas li ntawd, daim duab ntawm "Step-Dim Timer" cia koj teeb tsa 5 qib dimming ntawm timer. Hloov ntawm "0-10 V" dimming muaj nuj nqi, ib lub sij hawm multistep kuj siv tau. Txhawm rau ua qhov no, thov xaiv "Qhib-Dim Timer" muaj nuj nqi thiab tom qab ntawd qhib cov kev xaiv xaiv los ntawm nyem rau ntawm "Show Curve". Five dimming cov kauj ruam tuaj yeem teeb tsa, nrog cov kauj ruam ua tau nyob nruab nrab ntawm 1 thiab 4 teev. Cov theem dimming tuaj yeem teeb tsa hauv 5% cov kauj ruam ntawm 10 thiab 100%.
Ua kom lub "Output Override" muaj nuj nqi yuav luv luv rov qab teeb pom kev zoo rau 100% yog tias lub suab sensor tseem txuas nrog.
Qhov teeb tsa "Power On Sijhawm" tso cai rau koj txav daim duab rau kev txhim kho viewhauv.

Kev teeb tsa Parameter

• Min. dimming theem: 10…50%
• Pib dimming voltage: 5v
• Stop dimming voltage: 1.2v

Nco tseg
Cov sij hawm qhia tsis yog hais txog lub sij hawm tiag tiag ntawm hnub, tab sis yog siv rau kev piav qhia nkaus xwb

Kev tiv thaiv thermal muaj nuj nqi rau LED modules (NTC)

LED modules tuaj yeem tiv thaiv overheating los ntawm kev sib txuas NTC rau tus tsav tsheb, qhov kawg ntawm txoj haujlwm yuav tsum tau qhib thiab qhov tsim nyog kuj yuav tsum tau teev tseg. Qhov qis tshaj dimming theem tuaj yeem teeb tsa hauv feem pua.

Cov txiaj ntsig sib luag kuj tuaj yeem teeb tsa hauv daim duab.

Tsis tu ncua Lumen Output (CLO)

Txoj haujlwm no yog deactivated los ntawm lub neej ntawd. Txhawm rau kom ntseeg tau tias qhov tso tawm lumen tas li, qhov tso zis ntawm cov iav tswj tau maj mam nce ntxiv hauv lub sijhawm ntawm kev pabcuam lub neej. Nyem rau ntawm lub thawv tswj yuav cia koj teeb tsa mus txog 8 theem teeb (%) tshaj 100,000 teev.

Daim duab qhia txog qhov no.

Activating End-of-Life Function

Qhov kawg ntawm lub neej muaj nuj nqi yog deactivated los ntawm lub neej ntawd. Yog tias qhib, lub teeb ntawm lub cuab yeej yuav flash 3 zaug yog tias lub sijhawm ua haujlwm siab tshaj plaws ntawm 50,000 teev tau mus txog thaum lub cuab yeej hloov pauv.

Txuag thiab Hloov Cov Ntaub Ntawv

Txuag
Thaum koj tau ua tiav configuration tiav, lub configuration profile tuaj yeem khaws cia ntawm qhov chaw koj xaiv hauv "Txuag Profile”.

Programming
Thaum configuration tau ua tiav, cov parameter qhov tseem ceeb yuav raug xa mus rau tus tsav tsheb.

Txhawm rau ua qhov kev ntsuas qhov tseem ceeb, nyem rau ntawm "Program", whereupon tag nrho cov tshuab ua kom tsis muaj zog yuav raug xa mus thiab qhov kev pom zoo yuav tshwm sim.

Txhawm rau program tus tsav tsheb ntxiv nrog tib qhov chaw, tsuas yog disconnect tus programmed tsav tsheb thiab txuas rau ib qho.
Programming yuav pib cia li tsis tas yuav tsum tau lwm keystroke.

Nyeem
Qhov "Read Function" cia koj nyeem tus tsav tsheb teeb tsa.
Cov txiaj ntsig yuav tshwm sim nyob rau hauv qhov chaw ua haujlwm ib zaug "Nyeem" yog nyem.

Nco tseg: Nyem rau ntawm "Reset Operate Time" yuav rov pib dua lub sijhawm ua haujlwm dhau los ntawm lub cuab yeej.

Thaum twg lub teeb hluav taws xob mus thoob ntiaj teb, Vossloh-Schwabe zoo li yuav tau ua qhov tseem ceeb hauv kev ua kom ntseeg tau tias txhua yam ua haujlwm ntawm kev hloov pauv.

Lub hauv paus hauv tebchaws Yelemes, VosslohSchwabe suav tias yog tus thawj coj thev naus laus zis hauv kev teeb pom kev zoo. Cov khoom zoo tshaj plaws, cov khoom ua tau zoo tshaj plaws tsim lub hauv paus ntawm lub tuam txhab txoj kev vam meej.

Vossloh-Schwabe cov khoom lag luam dav dav npog tag nrho cov khoom siv teeb pom kev zoo: LED tshuab nrog kev tswj cov iav sib txuam, cov tshuab kho qhov muag tau zoo, lub xeev-ntawm-the-art tswj systems (LiCS) nrog rau hluav taws xob thiab sib nqus ballasts thiab lampcov tuav.

Lub tuam txhab yav tom ntej yog Smart Lighting

Vossloh-Schwabe Deutschland GmbH: koj puas xav tau ntau tus thwjtim?
Lub Ob Hlis 25. 73660 Urbach · Germany
Xov tooj +49 (0) 7181/80 02-0
www.vossloh-schwabe.com

All rights reserved © Vossloh-Schwabe
Duab: Vossloh-Schwabe
Kev hloov pauv yuav raug hloov yam tsis tau ceeb toom
iProgrammer Streetlight Software EN 02/2021

Cov ntaub ntawv / Cov ntaub ntawv

LIGHTING SOLUTION 186780 Programming Streetlight Drivers siv iProgrammer Streetlight [ua pdf] Tus neeg siv phau ntawv 186780 Programming Streetlight Drivers siv iProgrammer Streetlight, 186780, Programming Streetlight Drivers siv iProgrammer Streetlight

Cov ntaub ntawv

• Cov neeg siv phau ntawv