unitronics V120-22-R6C Tataiso ea Mosebelisi ea Mosebelisi ea Lokisitsoeng ea Logic

 

Tlhaloso e Akaretsang

Lihlahisoa tse thathamisitsoeng ka holimo ke li-micro-PLC+HMIs, li-control tsa logic tse rugged tse nang le liphanele tse sebetsang tse hahelletsoeng.

Litaelo tse qaqileng tsa ho kenya tse nang le litšoantšo tsa marang-rang tsa I/O bakeng sa mefuta ena, litlhaloso tsa tekheniki, le litokomane tse ling li fumaneha Laeboraring ea Tekheniki ho Unitronics. webSebaka: https://unitronicsplc.com/support-technical-library/

 

Matshwao a Tlhokomediso le Dithibelo tse Akaretsang

Ha leha e le efe ea matšoao a latelang a hlaha, bala lintlha tse amanang le tsona ka hloko.

• Pele o sebelisa sehlahisoa sena, mosebelisi o tlameha ho bala le ho utloisisa tokomane ena.
• Tsohle exampli-les le litšoantšo li reretsoe ho thusa ho utloisisa, 'me ha li fane ka tiiso ea ts'ebetso. Unitronics ha e amohele boikarabello bakeng sa ts'ebeliso ea 'nete ea sehlahisoa sena ho latela li-examples.
• Ka kopo, lahla sehlahisoa sena ho latela maemo le melaoana ea lehae le ea naha.
• Ke basebeletsi ba nang le tsebo feela ba lokelang ho bula sesebelisoa sena kapa ho lokisa.
• Ho hloleha ho latela ditataiso tse nepahetseng tsa polokeho ho ka baka kotsi e mpe kapa tshenyo ya thepa.
• Se ke oa leka ho sebelisa sesebelisoa sena se nang le liparamente tse fetang maemo a lumelletsoeng.
• Ho qoba ho senya sistimi, o seke oa hokela / o hakolla sesebelisoa ha motlakase o le teng.

 

Mehopolo ea Tikoloho

• Se ke oa kenya libakeng tse nang le: lerōle le feteletseng kapa le nang le mocheso o mongata, khase e senyang kapa e tukang, mongobo kapa pula, mocheso o feteletseng, ts'oaetso e tloaelehileng kapa ho sisinyeha ho feteletseng, ho latela maemo a fanoeng letlapeng la lintlha tsa theknoloji ea sehlahisoa.
• U se ke ua kenya metsi kapa ua lumella metsi hore a lutlele holim'a yuniti.
• Se ke oa lumella litšila ho oela ka har'a yuniti nakong ea ho kenya.
• Ho kenya moea: 10mm sebaka se hlokahalang pakeng tsa mathōko a ka holimo/ka tlaase le mabota a kampetsoeng.
• Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.

 

Ho phahamisa

Hlokomela hore lipalo ke tsa lipapiso feela.

 

Ho phahamisa Panel

Pele o qala, hlokomela hore phanele e ntseng e eketseha e ke ke ea ba botenya bo fetang 5 mm.

1. Etsa phanele e sehiloeng ka boholo bo loketseng:
2. Tsamaisa selaoli sebakeng se sehiloeng, ho etsa bonnete ba hore tiiso ea rabara e teng.
3. Sututsa li-brackets tse ntseng li phahama ka har'a li-slots tsa tsona mahlakoreng a phanele joalo ka ha ho bonts'itsoe setšoantšong se ka tlase.
4. Tiisa li-screws tsa bracket khahlanong le phanele. Tšoara borakete ka mokhoa o sireletsehileng khahlano le yuniti ha u ntse u tiisa screw.
5. Ha e kentsoe ka nepo, selaoli se lula se le sephara ka har'a karolo e sehiloeng ea liphanele joalokaha ho bontšitsoe litšoantšong tse tsamaisanang le sehlooho sena.

 

DIN-rail Mounting

1. Tobetsa selaoli seporong sa DIN joalokaha ho bontšitsoe setšoantšong se ka ho le letona.

2. Ha e behiloe hantle, molaoli o lutse ka ho lekana ho DIN-rail joalokaha ho bontšitsoe setšoantšong se ka ho le letona.

 

Wiring

• U se ke ua tšoara lithapo tse phelang.
• Thepa ena e etselitsoe ho sebetsa feela libakeng tsa SELV/PELV/Class 2/Limited Power.
• Lisebelisoa tsohle tsa motlakase tsamaisong li tlameha ho kenyelletsa ho pata habeli. Liphello tsa phepelo ea motlakase li tlameha ho lekanyetsoa joalo ka SELV/PELV/Class 2/Limited Power.
• Se ke oa hokela lets'oao la 'Neutral kapa' Line' la 110/220VAC ho phini ea 0V ea sesebelisoa.
• Mesebetsi eohle ea lithapo e lokela ho etsoa ha motlakase o TLOhile.
• Sebelisa tšireletso e feteletseng, joalo ka fuse kapa sekhechana sa potoloho, ho qoba maqhubu a feteletseng sebakeng sa khokahano ea phepelo ea motlakase.
• Lintlha tse sa sebelisoeng ha lia lokela ho kopanngoa (ntle le haeba ho boletsoe ka tsela e 'ngoe). Ho iphapanyetsa taelo ena ho ka senya sesebelisoa.
• Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase.
• Tlhokomeliso: Ho qoba ho senya terata, o seke oa feta torque e kholo ea: - Balaoli ba fanang ka block ea terminal e nang le molumo oa 5mm: 0.5 N·m (5 kgf·cm). – Balaoli ba fanang ka block block e nang le molumo oa 3.81mm f 0.2 N·m (2 kgf·cm).
• Se ke oa sebelisa thini, solder kapa ntho leha e le efe holim'a terata e hlobotseng e ka etsang hore khoele ea terata e khaohe.
• Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.

 

Mokhoa oa ho Wiring

Sebelisa li-terminals tsa crimp bakeng sa wiring;

• Balaoli ba fanang ka block block e nang le sekontiri sa 5mm: terata ea 26-12 AWG (0.13 mm2 -3.31 mm2).
• Balaoli ba fanang ka block block e nang le sekontiri sa 3.81mm: terata ea 26-16 AWG (0.13 mm2 - 1.31 mm2).

1. Hlobola terata ho bolelele ba 7±0.5mm (0.270–0.300“).
2. Hlakola theminale sebakeng sa yona se sephara ka ho fetisisa pele o kenya terata.
3. Kenya terata ka ho feletseng ka har'a terminal ho netefatsa hore ho na le khokahanyo e nepahetseng.
4. Tiisa ka ho lekaneng hore terata e se ke ea hula ka bolokolohi.

 

Litaelo tsa Wiring

• Sebelisa mehala e arohaneng ea likhoele bakeng sa sehlopha ka seng sa lihlopha tse latelang:
  o Sehlopha sa 1: Phallo e tlasetage I/O le likhoele tsa phepelo, mehala ea puisano.
  o Sehlopha sa 2: Phallo e phahamengtage Lines, Low voltage mehala e lerata joalo ka liphetho tsa mokhanni oa enjene.
  Arola lihlopha tsena ka bonyane 10cm (4″). Haeba sena se sa khonehe, tšela likotopo ka 90˚angle.
• Bakeng sa ts'ebetso e nepahetseng ea sistimi, lintlha tsohle tsa 0V tsamaisong li lokela ho hokahana le seporo sa phepelo sa 0V.
• Litokomane tse ikhethileng ka sehlahisoa li tlameha ho baloa le ho utloisisoa ka botlalo pele li etsa mohala. Lumella voltagtšitiso ea ho theola le lerata le mela e kenang e sebelisoang sebakeng se selelele. Sebelisa terata e boholo bo lekaneng bakeng sa mojaro.

 

Ho fafatsa sehlahisoa

Ho eketsa ts'ebetso ea sistimi, qoba tšitiso ea motlakase ka tsela e latelang:

• Sebelisa khabinete ea tšepe.
• Hokela 0V le lintlha tsa fatše tse sebetsang (haeba li le teng) ka kotloloho mobung oa lefatše oa sistimi.
• Sebelisa e khutsoanyane, e ka tlase ho 1m (3.3 ft.) le e tenya, 2.08mm² (14AWG) mets, lithapo tse ka khonehang.

 

UL Compliance

Karolo e latelang e amana le lihlahisoa tsa Unitronics tse thathamisitsoeng le UL.
Mehlala e latelang: V120-22-T1, V120-22-T2C, V120-22-UA2, V120-22-UN2, M91-2-R1, M91-2-R2C, M91-2-R6, M91-2- R6C, M91-2-T1, M91-2-T2C, M91-2-UA2, M91-2-UN2 li thathamisitsoe ke UL bakeng sa Libaka tse Kotsi.

The following models: V120-22-R1, V120-22-R2C, V120-22-R34, V120-22-R6, V120-22-R6C, V120-22-RA22, V120-22-T1, V120-22-T2C, V120-22-T38, V120-22-UA2, V120-22-UN2, M91-2-FL1, M91-2-PZ1, M91-2-R1, M91-2-R2, M91-2-R2C, M91-2-R34, M91-2-R6, M91-2-R6C, M91-2-RA22, M91-2-T1, M91-2-T2C, M91-2-T38, M91-2-TC2, M91-2-UA2, M91-2-UN2, M91-2-ZK, M91-T4-FL1, M91-T4-PZ1, M91-T4-R1, M91-T4-R2, M91-T4-R2C, M91-T4-R34, M91-T4-R6, M91-T4-R6C, M91-T4-RA22, M91-T4-T1, M91-T4-T2C, M91-T4-T38, M91-T4-TC2, M91-T4-UA2, M91-T4-UN2, M91-T4-ZK are UL listed for Ordinary Location.

Bakeng sa mefuta e tsoang letotong la M91, e kenyelletsang "T4" ka lebitso la Mohlala, E loketse ho hlongoa holim'a sebaka se bataletseng sa mofuta oa mofuta oa 4X.
Bakeng sa mohlalaampka tlase: M91-T4-R6

 

UL Sebaka se Tloaelehileng

E le hore u finyelle maemo a tloaelehileng a sebaka sa UL, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa ea 4 X.

 

UL Ratings, Programmable Controllers for Sebelisoa Libakeng tse Kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.

Lintlha tsena tsa Tokollo li amana le lihlahisoa tsohle tsa Unitronics tse nang le matšoao a UL a sebelisoang ho tšoaea lihlahisoa tse lumelletsoeng ho sebelisoa libakeng tse kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.

Tlhokomeliso:

• Thepa ena e loketse ho sebelisoa ho Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D, kapa libakeng tse seng kotsi feela.
• Lithapo tsa ho kenya le tse tsoang li tlameha ho tsamaellana le mekhoa ea likhoele tsa Sehlopha sa I, Karolo ea 2 le ho latela bolaoli bo nang le matla a ho laola.
• TLHOKOMELISO—Kotsi ea Ho phatloha—ho fapanyetsana ha likarolo ho ka ’na ha sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2.
• TLHOKOMELISO - KOTSI EA HO PHAHLOA - Se ke oa hokela kapa ua hakolla lisebelisoa ntle le haeba motlakase o tingoe kapa sebaka seo ho tsejoa hore ha se kotsi.
• TLHOKOMELISO - Ho pepesetsoa lik'hemik'hale tse ling ho ka theola thepa ea tiiso ea thepa e sebelisoang ho Relays.
• Thepa ena e tlameha ho kengoa ho sebelisoa mekhoa ea likhoele joalo ka ha ho hlokahala bakeng sa Sehlopha sa I, Karolo ea 2 joalo ka NEC le/kapa CEC.

 

Phanele-Mounting

Bakeng sa li-controller tse ka hlophisoang le ka har'a phanele, molemong oa ho kopana le maemo a UL Haz Loc, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa mefuta ea 4X.

 

Relay Output Resistance Ratings

Lihlahisoa tse thathamisitsoeng ka tlase li na le liphetho tsa relay:
Programmable controllers, Models: M91-2-R1, M91-2-R2C,M91-2-R6C, M91-2-R6

• Ha lihlahisoa tsena tse khethehileng li sebelisoa libakeng tse kotsi, li lekantsoe ho 3A res.
• ha lihlahisoa tsena tse ikhethileng li sebelisoa maemong a tikoloho a seng kotsi, li lekantsoe ho 5A res, joalo ka ha ho fanoe ka litlhaloso tsa sehlahisoa.

 

Mekhahlelo ea Mocheso

Batsamaisi ba Logic ba Programmable, Mehlala, M91-2-R1, M91-2-R2C, M91-2-R6C.

• Ha lihlahisoa tsena li sebelisoa libakeng tse kotsi, li ka sebelisoa feela ka har'a mocheso oa 0-40ºC (32- 104ºF).
• Ha lihlahisoa tsena li sebelisoa maemong a tikoloho a seng kotsi, li sebetsa ka har'a sebaka sa 0-50ºC (32- 122ºF) se fanoeng ho latela lintlha tsa sehlahisoa.

 

Ho ntsha/ Ho ntsha betri

Ha sehlahiswa se kentswe ka betri, o se ke wa ntsha kapa wa nkela betri sebaka ntle le haeba motlakase o timilwe, kapa sebaka seo ho tsejwa hore ha se kotsi.

Ka kopo hlokomela hore ho kgothaletswa ho boloka dintlha tsohle tse bolokiloeng ho RAM, e le ho qoba ho lahleheloa ke data ha u fetola betri ha matla a tima. Lintlha tsa letsatsi le nako le tsona li tla hloka ho hlophisoa bocha kamora ts'ebetso.

 

 

 

 

Li-Ports tsa puisano

Hlokomela hore mefuta e fapaneng ea balaoli e fana ka likhetho tse fapaneng tsa serial le likhokahano tsa CANbus. Ho bona hore na ke likhetho life tse bohlokoa, hlahloba lintlha tsa tekheniki tsa molaoli oa hau.

• Tima motlakase pele o etsa likhokahano tsa likhokahano.

Tlhokomeliso

• Hlokomela hore li-ports tsa serial ha lia aroloa.
• Lipontšo li amana le 0V ea molaoli; 0V e tšoanang e sebelisoa ke phepelo ea motlakase.
• Kamehla sebelisa li-adapter tse loketseng tsa koung.

 

Lipuisano tsa Seriana

Letoto lena le na le 2 serial port e ka hlophisoa ho RS232 kapa RS485 ho latela litlhophiso tsa jumper. Ka kamehla, likou li behiloe ho RS232.

Sebelisa RS232 ho khoasolla mananeo ho tsoa komporong, le ho buisana le lisebelisoa tsa serial le lits'ebetso, joalo ka SCADA.

Sebelisa RS485 ho theha marang-rang a marotholi a mangata a nang le lisebelisoa tse fihlang ho 32.

Tlhokomeliso

• Li-ports tsa serial ha lia aroloa. Haeba molaoli o sebelisoa ka sesebelisoa sa kantle se sa sebetseng, qoba matla a ka bang tengtage e fetang ± 10V.

Pinouts
Li-pinouts tse ka tlase li bonts'a matšoao lipakeng tsa adaptara le boema-kepe.

*Lithapo tse tloaelehileng tsa lenaneo ha li fane ka lintlha tsa khokahanyo bakeng sa Pins 1 le 6.

RS232 ho RS485: Ho Fetola Litlhophiso tsa Jumper

• Ho fihlella li-jumpers, bula molaoli ebe o tlosa boto ea PCB ea module. Pele o qala, tima phepelo ea motlakase, khaola le ho theola selaoli.
• Ha kou e ikamahanya le RS485, Pin 1 (DTR) e sebelisetsoa lets'oao la A, 'me lets'oao la Pin 6 (DSR) le sebelisetsoa lets'oao la B.
• Haeba kou e behiloe ho RS485, 'me matšoao a phallo ea DTR le DSR ha a sebelisoe, kou e ka boela ea sebelisoa ho buisana ka RS232; ka likhoele tse loketseng le likhoele.
• Pele o etsa liketso tsena, ama ntho e theiloeng fatše ho ntša tefiso efe kapa efe ea electrostatic.
• Qoba ho ama letlapa la PCB ka kotloloho. Tšoara boto ea PCB ka lihokelo tsa eona.

 

Ho bula molaoli

 

M91: RS232/RS485 Litlhophiso tsa Jumper

V120: RS232/RS485 Litlhophiso tsa Jumper

CANbus
Balaoli bana ba kenyelletsa boema-kepe ba CANbus. Sebelisa sena ho theha marang-rang a taolo a arolelanoeng a balaoli ba fihlang ho 63, o sebelisa protocol ea CANbus ea botho ea Unitronics kapa CANopen.

Boema-kepe ba CANbus bo qheletsoe ka thoko.

CANbus Wiring
Sebelisa thapo e sothehileng. DeviceNet® tenya
shielded twisted pair cable e kgothaletswa.
Li-terminator tsa marang-rang: Tsena li fanoa ka molaoli. Beha li-terminators pheletsong e 'ngoe le e 'ngoe ea marang-rang a CANbus.
Ho hanyetsa ho tlameha ho behoa ho 1%, 1210, 1/4W.
Hokela lets'oao la fatše lefatšeng sebakeng se le seng feela, haufi le phepelo ea motlakase.
Matla a marang-rang ha a hloke ho ba qetellong ea marang-rang

Sehokelo sa CANbus

Lintlha tse tokomaneng ena li bontša lihlahisoa ka letsatsi la khatiso. Unitronics e na le tokelo, ho ipapisitsoe le melao eohle e sebetsang, ka nako efe kapa efe, ka boikhethelo ba eona, ntle le tsebiso, ea ho khaotsa kapa ho fetola likarolo, meralo, thepa le lintlha tse ling tsa lihlahisoa tsa eona, le ho hula ka ho sa feleng kapa ka nakoana. tse furallang mmarakeng.

Lintlha tsohle tse tokomaneng ena li fanoe ka "joalokaha li le" ntle le tiisetso ea mofuta ofe kapa ofe, e ka hlahisoang kapa e ka hlalosoang, ho kenyeletsoa empa e sa felle feela ho litiisetso leha e le life tse boleloang tsa thekiso, ho sebetsa ka morero o itseng, kapa ho se tlōle molao. Unitronics ha e nke boikarabello bakeng sa liphoso kapa lintho tse sieo boitsebisong bo hlahisitsoeng tokomaneng ena. Ha ho ketsahalo e tla ba le boikarabello bakeng sa litšenyehelo tse khethehileng, tse sa lebelloang, tse sa tobang kapa tsa litlamorao tsa mofuta ofe kapa ofe, kapa tšenyo efe kapa efe e hlahang kapa e amanang le ts'ebeliso kapa ts'ebetso ea tlhahisoleseling ena.

Mabitso a kgwebo, matshwao a kgwebo, matshwao a kgwebo, matshwao a ditshebeletso a hlahisitsweng tokomaneng ena, ho kenyeletswa le moetso wa ona, ke thepa ya Unitronics (1989) (R”G) Ltd. kapa batho ba bang ba boraro mme ha o a dumellwa ho di sebedisa ntle le tumello e ngotsweng pele. tsa Unitronics kapa motho e mong ea ka bang mong'a tsona

 

Bala haholoanyane ka Bukana ena & Khoasolla PDF:

Litokomane / Lisebelisoa

unitronics V120-22-R6C Selaoli sa Monahano se Reriloeng [pdf] Bukana ea Mosebelisi V120-22-R6C Taolo ea Merero e hlophisitsoeng, V120-22-R6C, Taolo ea Melaetsa ea Merero, Taolo ea Litlhaloso

Litšupiso

• Bukana ea Mosebelisi