µPCII- Taolo e ka Rarolloang e Hahelletsoeng ka Sekoaelo le ntle le eona
Litaelo
BALA 'ME U BOLOKE LITAELO TSENA
Tlhaloso ea sehokelo
Senotlolo:
- Phepelo ea motlakase 230Vac bakeng sa mofuta o nang le transformer(UP2A*********)
Phepelo ea motlakase 230Vac bakeng sa mofuta o nang le transformer, e tsamaellanang le likhase tse tukang tsa sehatsetsi (UP2F*********)
Phepelo ea motlakase 24Vac bakeng sa mofuta ntle le trasformer (UP2B*********)
Phepelo ea motlakase 24Vac bakeng sa mofuta o se nang trasformer, e tsamaellanang le likhase tse tukang tsa sehatsetsi (UP2G*********) - Universal channel
- Liphetho tsa analog
- Lisebelisoa tsa dijithale
- 5a.Sephetho sa valve 1
5b.Sehlahisoa sa valve 2 - Relay digital output switch mofuta
- Moqtagli-inputs tsa dijithale 2, 3, 4, 5
- Moqtage liphetho tsa digital
- Alarm digital output
- serial line pLAN
- Setšoantšo sa BMS2
- serial line Fieldbus
- Sehokelo sa terminal sa PLD
- Dipswitch bakeng sa khetho
- Karete ea serial ea boikhethelo
- Phepelo ea matla - Green Led
Litemoso tsa bohlokoa
Sehlahisoa sa CAREL ke sehlahisoa sa morao-rao, seo ts'ebetso ea sona e boletsoeng litokomaneng tsa tekheniki tse fanoeng le sehlahisoa kapa se ka khoasolloa, le pele se rekoa ho tsoa ho websebaka sa marang-rang www.carel.com. - Moreki (mohahi, mohlahisi kapa sehlomathisi sa thepa ea ho qetela) o nka boikarabelo bo bong le bo bong le kotsi e amanang le mohato oa ho lokisa sehlahisoa e le hore a fihlele liphello tse lebeletsoeng mabapi le ho kenngoa ha ho qetela le/kapa thepa. Khaello ea karolo e joalo ea thuto, e kopiloeng/e bontšitsoeng bukeng ea mosebelisi, e ka etsa hore sehlahisoa sa ho qetela se se ke sa sebetsa hantle seo CAREL e ke keng ea jara boikarabello ba sona. Moreki oa ho qetela o tlameha ho sebelisa sehlahisoa feela ka mokhoa o hlalositsoeng litokomaneng tse amanang le sehlahisoa ka bosona. Boikarabello ba CAREL mabapi le sehlahisoa sa eona bo laoloa ke maemo a kakaretso a konteraka ea CAREL a hlophisitsoeng ho websebaka www.carel.com le/kapa ka ditumellano tse itseng le bareki.
TLHOKOMELISO: arola kahohle kamoo ho ka khonehang lithapo le likhoele tsa mats'oao a dijithale ho tsoa likhoeleng tse jereng meroalo e kenang le lithapo tsa motlakase ho qoba tšitiso e ka bang teng ea motlakase. Le ka mohla u se ke ua tsamaisa lithapo tsa motlakase (ho kenyeletsoa lithapo tsa motlakase) le likhoele tsa mats'oao likotopong tse tšoanang.
Ho lahlwa ha sehlahiswa: Sesebediswa (kapa sehlahiswa) se tlameha ho lahlwa ka thoko ho ya ka molao wa lehae o sebetsang wa ho lahlwa ha matlakala.
Litšobotsi tse akaretsang
μPCII ke taolo ea elektroniki e thehiloeng ho microprocessor e ntlafalitsoeng ke CAREL bakeng sa lits'ebetso tse ngata makaleng a moea, ho futhumatsa le lihatsetsi le tharollo bakeng sa lekala la HVAC/R. E netefatsa ho feto-fetoha ha maemo ho felletseng, ho lumella litharollo tse khethehileng ho etsoa ka kopo ea bareki. Ho sebelisa software ea 1tool e ntlafalitsoeng ke Carel bakeng sa molaoli ea ka khonehang, ho netefatsoa hore ho na le maemo a phahameng a ho feto-fetoha le maemo a loketseng ts'ebeliso ka 'ngoe. µPCII e laola lintho tse hlahisoang, sebopeho sa mosebelisi sa pGD le likhokahano tsa lisebelisoa tse ling ka lebaka la likou tse tharo tsa serial tse ahiloeng ka hare. Lekanale la bokahohleng (le bitsoang on the drawing U) le ka hlophisoa ka software ea ts'ebeliso ho hokahanya li-probes tse sebetsang le tse sa sebetseng, molumo oa mahala.tage kenyellelitsoeng ka dijithale, lipoelo tsa analoge le liphetho tsa PWM. Theknoloji ena e eketsa tlhophiso ea mela ea tlhahiso ea ho kenya le ho feto-fetoha ha sehlahisoa bakeng sa lits'ebetso tse fapaneng. Software ea 1TOOL e ka kengoang ho PC, bakeng sa ho theha le ho itloaetsa software ea ts'ebeliso, ketsiso, leihlo le tlhaloso ea marang-rang a pLAN, e re lumella ho hlahisa lits'ebetso tse ncha kapele. Ho kenya software ea kopo ho laoloa ho sebelisoa pCO Manager ea lenaneo, e fumanehang mahala setšeng http://ksa.carel.com.
Litšobotsi tsa I/O
| Lisebelisoa tsa dijithale | Mofuta: voltage-free contact digital inputs Palo ea tse kentsoeng tsa dijithale (DI): 4 |
| Liphetho tsa analogue | Mofuta: 0T10 Vdc e tsoelang pele, PWM 0T10V 100 Hz e lumellanang le phepelo ea matla, PWM 0…10 V frequency 100 Hz, PWM 0…10 V frequency 2 KHz, boholo ba hajoale 10mA Palo ea liphetho tsa analogue (Y): 3 Ho nepahala ha liphetho tsa analog: +/- 3% ea sekala se felletseng |
| Likanale tse akaretsang | Phetoho e nyane ea analogue-digital: 14 Mofuta oa ho kenya o ka khethoang ke software: NTC, PT1000, PT500, PT100, 4-20mA, 0-1V, 0-5V, 0-10V, MoqtagKenyelletso ea mahala ea dijithale ea e-free, kenyeletso e potlakileng ea dijithale ** Mofuta oa tlhahiso e ka khethoang ke software: PWM 0/3,3V 100Hz, PWM 0/3,3V 2KHz, tlhahiso ea Analogue 0-10V – Boholo ba hona joale 2mA Palo ea likanale tse akaretsang (U): 10 Ho nepahala ha li-probes tse sa sebetseng: ± 0,5 C maemong ohle a mocheso Ho nepahala ha li-probes tse sebetsang: ± 0,3% maemong ohle a mocheso Ho nepahala ha tlhahiso ea analogue: ± 2% sekala se felletseng |
| Liphetho tsa dijithale | Sehlopha sa 1 (R1), Matla a fetohang: NO EN 60730-1 1(1) A 250Vac (100.000 cycles) UL 60730-1: 1 A resistive 30Vdc/250Vac, 100.000 cycles Sehlopha sa 2 (R2), Matla a fetohang: NO EN 60730-1 1(1) A 250Vac (100.000 cycles) UL 60730-1: 1 A resistive 30Vdc/250Vac 100.000 cycles, 1/8Hp (1,9 FLA, 11,4 LRA) 250Vac, C300 pilot duty 250Vac, 30.000 li-cycle Sehlopha sa 2 (R3, R4, R5), Matla a fetohang: NO EN 60730-1 2(2) A 250Vac (100.000 cycles) UL 60730-1: 2 A resistive 30Vdc/250Vac, C300 pilot duty 240Vac, 30.000 cycles Sehlopha sa 3 (R6, R7, R8), Matla a fetohang: NO EN 60730-1 6(4) A 250Vac (100.000 cycles) UL 60730-1: 10 A resistive, 10 FLA, 60 LRA, 250Vac, 30.000 cycles (UP2A*********,UP2B*********) UL 60730-1: 10 A resistive, 8 FLA, 48 LRA, 250Vac, 30.000 cycles (UP2F*********,UP2G*********) Matla a feto-fetohang a maholotage: 250Vac. Switchable power R2, R3 (SSR case mounting): 15VA 110/230 Vac kapa 15VA 24 Vac e itšetlehile ka mohlala Li-relays ka lihlopha tsa 2 e 3 li na le insulation ea motheo 'me motlakase o tšoanang o tlameha ho sebelisoa. Tlhokomeliso bakeng sa sehlopha sa 2, se nang le 24Vac SSR, phepelo ea motlakase e tlameha ho ba SELV 24Vac. Pakeng tsa lihlopha tse fapaneng tsa li-relay ho ne ho ka sebelisoa lisebelisoa tse fapaneng tsa motlakase (insulation e matlafalitsoeng). |
| Unipolar valve | Nomoro ea valve: 2 |
| lihlahisoa | Matla a phahameng bakeng sa belofo ka 'ngoe: 7 W Mofuta oa mosebetsi: unipolar Sehokelo sa valave : Lipini tse 6 ka tatellano e tsitsitseng Phepelo ea matla: 12 Vdc ± 5% Boholo ba hona joale: 0.3 A bakeng sa matsoelintsoeke ka 'ngoe Bonyane bo hanyetsanang le maqhubu: 40 Ω Boholo ba bolelele ba cable: 2m ntle le thapo e sirelelitsoeng. 6 m e nang le thapo e sirelelitsoeng e hoketsoeng ho fatše ka bobeli ka lehlakoreng la valve le lehlakoreng la molaoli oa elektroniki (E2VCABS3U0, E2VCABS6U0) |
** boholo. 6 sonder 0…5Vraz. le max. 4 sonder 4…20mA
Litaelo tsa ho lahla
- Sesebediswa (kapa sehlahiswa) se tlameha ho lahlwa ka thoko ho ya ka molao wa lehae o sebetsang wa ho lahlwa ha matlakala.
- Se ke oa lahla sehlahisoa joalo ka litšila tsa masepala; e tlameha ho lahloa ka litsi tse khethehileng tsa ho lahla litšila.
- Sehlahisoa se na le betri e tlamehang ho ntšoa le ho aroloa ho sehlahisoa kaofela ho latela litaelo tse fanoeng, pele se lahla sehlahisoa.
- Tšebeliso e fosahetseng kapa ho lahla sehlahisoa ka mokhoa o fosahetseng ho ka ba le litlamorao tse mpe bophelong ba batho le tikolohong.
- Ketsahalong ea ho lahloa ho seng molaong ha litšila tsa motlakase le tsa elektroniki, likotlo li hlalosoa ke molao oa sebaka sa ho lahla litšila.
Litekanyo
Taelo ea ho phahamisa
Hlokomela:
- Ho kenya li-connectors, likarolo tsa polasetiki A le B ha lia kenngoa. Pele o kenya matla sehlahisoa ka kopo, beha likarolo tsa A le B tse shebileng setulong se amanang ka pel'a lehlakore le letona ebe lehlakoreng le letšehali ka motsamao oa rotary joalo ka ha ho bonts'itsoe setšoantšong.
Kopano ea likarolo tsa polasetiki A le B li tlohella ho fihlela polokeho e kholo ea motlakase bakeng sa mosebelisi.
Litlhaloso tsa Mechini le Motlakase
Phepelo ea motlakase:
230 Vac, +10…-15% UP2A*********, UP2F*********;
24 Vac +10%/-15% 50/60 Hz,
28 ho 36 Vdc +10 ho -15% UP2B **********, UP2G **********;
Matla a phahameng haholo: 25 VA
Insulation pakeng tsa phepelo ea motlakase le sesebelisoa
- mokhoa. 230Vac: e matlafalitsoe
- mokhoa. 24Vac: e matlafalitsoe ka phepelo ea motlakase ea sesebelisoa sa polokeho
Boholo ba matlatage lihokelo J1 le ho tloha J16 ho ea J24: 250 Vac;
Karolo e fokolang ea lithapo - lihlahisoa tsa digital: 1,5 mm
Karolo e fokolang ea lithapo tsa lihokelo tse ling kaofela: 0,5mm
Hlokomela: bakeng sa k'habote ea dijithale haeba sehlahisoa se sebelisoa mochesong oa 70°C oa 105°C thapo e amohetsoeng e tlameha ho sebelisoa.
Phepelo ea motlakase
Mofuta: +Vdc, +5Vr bakeng sa phepelo ea motlakase bakeng sa probe ea kantle, +12Vdc bakeng sa phepelo ea motlakase ea terminal
E lekantsoeng phepelo ea motlakase voltage (+Vdc): 26Vdc ±15% bakeng sa mefuta ea 230Vac phepelo ea motlakase (UP2A*********, UP2F*********),
21Vdc ±5% bakeng sa mefuta ea motlakase ea 24Vac (UP2B*********, UP2G*********)
Max e fumanehang hona joale + Vdc: 150mA, kakaretso e nkiloeng ho lihokelo tsohle, e sirelelitsoeng khahlano le lipotoloho tse khutšoane
E lekantsoeng phepelo ea motlakase voltage (+5Vr): 5Vdc ±2%
Boholo bo fumanehang hona joale (+5Vr): 60mA, kakaretso e nkiloeng ho lihokelo tsohle, e sirelelitsoeng khahlano le li-circuits
E lekantsoeng phepelo ea motlakase voltage (Vout): 26Vdc ±15% bakeng sa mefuta ea 230Vac ea motlakase (UP2A*********, UP2F*********),
21Vdc ± 5% Max e teng hona joale (Vout) (J9): 100mA, e loketseng phepelo ea motlakase
THTUNE CAREL terminal, e sirelelitsoeng khahlano le li-circuits tse khutšoane
Litlhaloso tsa sehlahisoa
Mehopolo ea lenaneo (FLASH): 4MB (2MB BIOS + 2MB lenaneo la kopo)
Ho nepahala ha oache ea ka hare: 100 ppm
Mofuta oa betri: Battery ea lithium (e tlosoa), CR2430, 3 Vdc
Litšobotsi tsa bophelo bohle ba betri ea betri e ntšitsoeng: Bonyane lilemo tse 8 maemong a tloaelehileng a ts'ebetso
Melao ea sebaka sa betri: Se ke oa fetola betri, ikopanye le litšebeletso tsa bareki ba Carel bakeng sa ho e fetola
Ts'ebeliso ea Betri: betri e sebelisoa feela bakeng sa ts'ebetso e nepahetseng ea oache ea kahare ha e sa tsamaisoa le ho boloka data ho mofuta oa memori oa T oa software ea ts'ebeliso. Tlosa betri haeba nako e sa ntlafatsoa ha o qala sehlahisoa bocha
Sehokelo sa mosebelisi se teng
Mofuta: liteishene tsohle tsa pGD tse nang le sehokelo J15, terminal ea PLD e nang le sehokelo J10,
THTune e nang le sehokelo J9.
Sebaka se seholo sa terminal ea PGD: 2m ka sehokelo sa mohala J15,
50m ka thebe-cable AWG24 e hokahantsoeng fatše ka mahlakoreng a mabeli le lehlakoreng la molaoli oa elektroniki
Max. palo ea sehokelo sa mosebelisi: Sehokelo se le seng sa malapa a pGD sehokelong J15 kapa J14. Sehokelo se le seng sa Thune sehokelong sa J9, kapa terminal ea PLD e nang le sehokelo J10 se khethang protocol ea tLAN ho switch dip board.
Mehala ea puisano e teng
Mofuta: RS485, Master for FieldBus1, Lekhoba la BMS 2, pLAN
N. ber ea melapo e fumanehang: Mohala o le 1 o sa khetha ho kenngoa ka har'a sehokelo sa J11 (BMS2).
Mohala o le mong ha o khethe ho kenngoa ho sehokelo sa J1 (Fieldbus), haeba o sa sebelisoe ho tsoa ho sehokelo sa mosebelisi sa pLD ho sehokelo sa J9.
Mohala o le mong ha o khethe ho kenngoa ho J1 connector (pLAN), haeba o sa sebelisoe ho tsoa ho pGD user interface ho J14 connector.
1 ea boikhethelo (J13), e ka khethoa ho tsoa ho Carrel ka boikhethelo
Bolelele bo phahameng ba khokahanyo: 2m ntle le thapo ea thebe, 500m ka thebe-thapo AWG24 e hoketsoeng fatše ka mahlakoreng a mabeli le lehlakoreng la molaoli oa elektroniki.
Boholo ba bolelele ba likhokahano
Lisebelisoa tsa Universal dijithale le ntho e ngoe le e ngoe ntle le litlhaloso tse fapaneng: ka tlase ho 10m
Liphetho tsa dijithale: ka tlase ho 30m
Serial Lines: hlahloba sesupo karolong e nepahetseng
Maemo a ts'ebetso
Polokelo: -40T70 °C, 90% rH non-condensing
Sebetsa: -40T70 °C, 90% rH e se nang condensing
Litlhaloso tsa mochini
Litekanyo: 13 DIN seporo modules, 228 x 113 x 55 mm
Teko ea khatello ea bolo: 125 °C
Lisebelisoa tse nang le likhase tsa sehatsetsi tse tukang
Bakeng sa ho sebelisoa ka likhase tse tukang tsa sehatsetsing, balaoli ba hlalositsoeng tokomaneng ena ba hlahlobiloe 'me ba ahloloa ba lumellana.
ka litlhoko tse latelang tsa litekanyetso tsa letoto la IEC 60335:
- Annex CC ea IEC 60335-2-24:2010 e boletsoeng ke poleloana ea 22.109 le Annex BB ea IEC 60335-2-89:2010 e boletsoeng ke poleloana 22.108; likarolo tse hlahisang li-arcs kapa li-spark nakong ea ts'ebetso e tloaelehileng li 'nile tsa lekoa' me tsa fumanoa li lumellana le litlhoko tsa UL/IEC 60079-15;
- IEC/EN/UL 60335-2-24 (lihlopha 22.109, 22.110) bakeng sa lihatsetsi tsa malapa le lihatsetsi;
- IEC/EN/UL 60335-2-40 (lihlopha 22.116, 22.117) bakeng sa lipompo tsa mocheso oa motlakase, li-air-conditioner le li-dehumidifiers;
- IEC/EN/UL 60335-2-89 (clauses 22.108, 22.109) bakeng sa lisebelisoa tsa khoebo tsa sehatsetsing.
Balaoli ba netefalitsoe bakeng sa mocheso o phahameng oa likarolo tsohle, tseo nakong ea liteko tse hlokoang ke IEC 60335 cl. 11 le 19 ha li fete 268° C.
Kamohelo ea lilaoli tsena ts'ebetsong ea ts'ebeliso ea ho qetela moo ho sebelisoang likhase tse tukang tsa sehatsetsi ho tla khutlisoaviewed le ho ahloloa qetellong ea tšebeliso ea tšebeliso.
Litlhaloso tse ling
Tšilafalo ea tikoloho: boemo ba 2
Lenane la tšireletso: IP00
Sehlopha ho latela ts'ireletso khahlanong le ts'okelo ea motlakase: ho kenyelletsoa ho lisebelisoa tsa Sehlopha sa I le / kapa II
Lisebelisoa tsa ho itšireletsa: PTI175. Rated impulse voltage: 2.500v.
Nako ea khatello ea maikutlo ho pholletsa le likarolo tsa insulating: nako e telele
Mofuta oa ketso: 1.C (Relays); 1.Y (110/230V SSR), SSR 24Vac ho khaola motlakase ha ho na tiisetso
Mofuta oa ho khaoha kapa ho switjha ha nyane: Mokhahlelo oa ho hanyetsa mocheso le mollo: sehlopha sa D (UL94 - V2)
Immunity khahlano le voltage surges: sehlopha sa II
sehlopha sa software le sebopeho: Sehlopha sa A
Ho se ame kapa ho lokisa sehlahisoa ha motlakase o sebelisoa
CAREL e na le tokelo ea ho fetola likarolo tsa lihlahisoa tsa eona ntle le tsebiso pele
CAREL Industries HQs
Via dell'Industria, 11 - 35020 Brugine - Padova (Italy)
Mohala (+39) 0499716611 - Fax (+39) 0499716600
lengolo-tsoibila: carel@carel.com
www.carel.com
+050001592 - rel. 1.3 letsatsi la 31.10.2022
Litokomane / Lisebelisoa
 |
CAREL µPCII- Taolo e ka Rarolloang e Hahelletsoeng ka hare e nang le Sekoaelo le ntle le eona [pdf] Litaelo 050001592, 0500015912, PCII- Programmable Built-in Controller with and without Cover, PCII, Programmable Built-in Controller with and without Cover, Programmable Built-in Controller, Controller Built-in Controller, Controller |