µPCII- Onye njikwa arụnyere n'ime mmemme nwere na enweghị mkpuchi
Ntuziaka
Gụọ ma chekwaa ntuziaka ndị a
Nkọwa njikọ
Igodo:
- Ike ọkọnọ 230Vac maka ụdị nwere transformer (UP2A *******)
Ọkụ ọkụ 230Vac maka ụdị ya na transformer, dakọtara na gas refrigerant na-ere ọkụ (UP2F *******)
Ike ọkọnọ 24Vac maka ụdị na-enweghị trasformer (UP2B *******)
Ọkụ ọkụ 24Vac maka ụdị na-enweghị trasformer, dakọtara na gas refrigerant na-ere ọkụ (UP2G *******) - Ọwa Universal
- Ihe nrụpụta analog
- Ntinye dijitalụ
- 5a.Valve mmepụta 1
5b.Valve mmepụta 2 - Relay ụdị mgbanwe mgbanwe dijitalụ
- Voltage ntinye maka mmepụta dijitalụ 2, 3, 4, 5
- Voltage dijitalụ mmepụta
- Mbupute dijitalụ nke mkpu
- Oghere Usoro pLAN
- Usoro akara BMS2
- Oghere Usoro Fieldbus
- Njikọ ọnụ ọnụ PLD
- Dipswitch maka nhọrọ
- Kaadị nsonazụ nhọrọ
- Ọkụ ọkụ – Green Led
Ịdọ aka ná ntị ndị dị mkpa
Ngwaahịa CAREL bụ ngwaahịa ọgbara ọhụrụ, nke akọwapụtara ọrụ ya na akwụkwọ teknụzụ ewepụtara na ngwaahịa ahụ ma ọ bụ nwee ike ibudata ya, ọbụlagodi tupu ịzụrụ, site na websaịtị www.carel.com. - Onye ahịa (onye nrụpụta, onye nrụpụta ma ọ bụ onye nrụpụta ngwa ikpeazụ) na-eburu ibu ọrụ ọ bụla na ihe egwu metụtara usoro nhazi ngwaahịa ahụ iji nweta nsonaazụ a tụrụ anya ya n'ihe gbasara nrụnye ikpeazụ na / ma ọ bụ akụrụngwa. Enweghị usoro ọmụmụ ihe dị otú ahụ, nke a rịọrọ/gosi na akwụkwọ ntuziaka onye ọrụ, nwere ike ime ka ngwaahịa ikpeazụ ghara ịrụ ọrụ nke CAREL enweghị ike ijide ya. Onye ahịa ikpeazụ ga-eji ngwaahịa ahụ naanị n'ụzọ akọwara n'ime akwụkwọ metụtara ngwaahịa ahụ n'onwe ya. A na-ahazi ụgwọ ọrụ CAREL n'ihe gbasara ngwaahịa nke ya site na ụkpụrụ nkwekọrịta izugbe nke CAREL edeziri na websaịtị www.carel.com na/ma ọ bụ site na nkwekọrịta kpọmkwem na ndị ahịa.
Ịdọ aka ná ntị: ikewapụ dịka o kwere mee nyocha na eriri mgbama ntinye dijitalụ site na eriri na-ebu ibu inductive na eriri ọkụ iji zere ọgba aghara electromagnetic. Ejila eriri ọkụ (gụnyere eriri ọkụ eletrik) na eriri mgbama n'otu eriri.
Ntufu ngwaahịa: Ngwa (ma ọ bụ ngwaahịa) ga-ekpochapụ ya iche dịka iwu mkpofu mkpofu mpaghara siri dị.
Njirimara izugbe
μPCII bụ ihe njikwa eletrọnịkị nke sitere na microprocessor nke CAREL mepụtara maka ọtụtụ ngwa na ngalaba ntụ oyi, kpo oku na friji yana ngwọta maka ngalaba HVAC/R. Ọ na-eme ka ọ dị mfe nghọta, na-enye ohere ịmepụta ihe ngwọta kpọmkwem na arịrịọ ndị ahịa. Iji sọftụwia 1tool nke Carel mepụtara maka onye na-ahụ maka mmemme, a na-emesi ya obi ike na mgbanwe mmemme kacha dabara adaba maka ngwa ọ bụla. µPCII na-achịkwa ntinye ntinye aka mgbagha, pGD onye ọrụ interface na ngwaọrụ ndị ọzọ nzikọrịta ozi n'ihi ọdụ ụgbọ mmiri atọ arụnyere n'ime ya. Enwere ike ịhazi ọwa eluigwe na ala (a na-akpọ na eserese U) site na ngwa ngwa iji jikọọ nyocha na-arụ ọrụ na nke na-agafe agafe, free vol.tage ntinye dijitalụ, mmepụta analọg na ntinye PWM. Teknụzụ a na-abawanye nhazi nke ahịrị mmepụta ntinye na mgbanwe nke ngwaahịa maka ngwa dị iche iche. Akụrụngwa 1TOOL nke a na-etinye na PC, maka ịmepụta na nhazi nke ngwa ngwa ngwa, simulation, nlekota na nkọwa nke netwọk pLAN, na-enye anyị ohere ịmepụta ngwa ọhụrụ ngwa ngwa. A na-achịkwa nbudata ngwanro ngwa site na iji mmemme pCO Manager, n'efu dị na saịtị ahụ http://ksa.carel.com.
Njirimara I/O
| Ntinye dijitalụ | Ụdị: voltagntinye dijitalụ kọntaktị e-free nọmba ntinye dijitalụ (DI): 4 |
| Nsonaazụ analog | Ụdị: 0T10 Vdc na-aga n'ihu, PWM 0T10V 100 Hz synchronous na ike ọkọnọ, Ugboro PWM 0…10 V ugboro 100 Hz, PWM 0…10 V ugboro 2 kHz, kacha ugbu a 10mA Ọnụọgụ nke nsonaazụ analọg (Y): 3 Nkenke mmepụta analọgụ: +/- 3% nke ọnụ ọgụgụ zuru oke |
| Ọwa zuru ụwa ọnụ | Ntụgharị analọgụ-dijitalụ Bit: 14 Ụdị ntinye nke ngwa ngwa họrọ: NTC, PT1000, PT500, PT100, 4-20mA, 0-1V, 0-5V, 0-10V, Voltagntinye dijitalụ kọntaktị e-free, ntinye dijitalụ ngwa ngwa ** Ụdị mmepụta a pụrụ ịhọrọ site na ngwanrọ: PWM 0/3,3V 100Hz, PWM 0/3,3V 2KHz, Analogue mmepụta 0-10V - kacha ugbu a 2mA Ọnụọgụ nke ọwa eluigwe na ala (U): 10 Izizi ihe nyocha na-agafe agafe: ± 0,5 C na oke okpomọkụ niile Izizi nyocha nke na-arụ ọrụ: ± 0,3% na oke okpomọkụ niile Izizi mmepụta analọgụ: ± 2% ọnụ ọgụgụ zuru oke |
| Nsonaazụ dijitalụ | Otu 1 (R1), ike mgbanwe: NO EN 60730-1 1 (1) A 250Vac (100.000 okirikiri) UL 60730-1: 1 A resistive 30Vdc/250Vac, 100.000 okirikiri Otu 2 (R2), ike mgbanwe: NO EN 60730-1 1 (1) A 250Vac (100.000 okirikiri) UL 60730-1: 1 A resistive 30Vdc/250Vac 100.000 okirikiri, 1/8Hp (1,9 FLA, 11,4 LRA) 250Vac, C300 pilot ọrụ 250Vac, 30.000 cycles Otu 2 (R3, R4, R5), ike mgbanwe: Ọ dịghị EN 60730-1 2 (2) A 250Vac (100.000 okirikiri) UL 60730-1: 2 A resistive 30Vdc/250Vac, C300 pilot ọrụ 240Vac, 30.000 okirikiri Otu 3 (R6, R7, R8), ike mgbanwe: Ọ dịghị EN 60730-1 6 (4) A 250Vac (100.000 okirikiri) UL 60730-1: 10 A resistive, 10 FLA, 60 LRA, 250Vac, 30.000 okirikiri (UP2A********, UP2B********) UL 60730-1: 10 A resistive, 8 FLA, 48 LRA, 250Vac, 30.000 okirikiri (UP2F********, UP2G********) Max nwere ike ịgbanwe voltage: 250Vac. Ike ịgbanwee R2, R3 (SSR case arịọnụ): 15VA 110/230 Vac ma ọ bụ 15VA 24 Vac dabere na ihe nlereanya The relays na otu 2 e 3 nwere isi mkpuchi na otu ike ọkọnọ ga-etinyere. Nlebara anya maka otu 2, nwere 24Vac SSR, ike ọkọnọ ga-abụrịrị SELV 24Vac. N'etiti dị iche iche relays gruops nwere ike tinye dị iche iche ike onunu (ike mkpuchi). |
| Unipolar Valve | Ọnụọgụ nke valvụ: 2 |
| mmepụta | Ike kachasị maka valvụ ọ bụla: 7 W Ụdị ọrụ: unipolar Njikọ Valve: 6 n'usoro edoziri Ike ọkọnọ: 12Vdc ± 5% Nke kachasị ugbu a: 0.3 A maka ikuku ọ bụla Nguzogide ikuku kacha nta: 40 Ω Ogologo eriri kachasị elu: 2m na-enweghị eriri mkpuchi. 6m nwere eriri mkpuchi ejikọrọ na ala ma n'akụkụ valvụ na akụkụ eletrọnịkị njikwa (E2VCABS3U0, E2VCABS6U0) |
** max. 6 sonder 0…5Vraz. na max. 4 sonder 4…20mA
Ntuziaka maka mkpofu
- A ga-ekpochapụ ngwa (ma ọ bụ ngwaahịa) iche iche dịka iwu mkpofu mkpofu mpaghara siri dị.
- Atụpụla ngwaahịa a ka ihe mkpofu nke ime obodo; a ga-ekpochapụ ya site na ebe ndị ọkachamara na-ekpofu ahịhịa.
- Ngwaahịa a nwere batrị ga-ewepụrịrị ma kewapụ ya na ngwaahịa ndị ọzọ dịka ntuziaka enyere, tupu ịtụfu ngwaahịa ahụ.
- Iji ezighi ezi ma ọ bụ mkpofu ngwaahịa na-ezighi ezi nwere ike imetụta ahụike mmadụ na gburugburu ebe obibi.
- N'ọnọdụ nke mkpofu ọkụ eletrik na eletrọnịkị n'ụzọ iwu na-akwadoghị, iwu mkpofu mkpofu mpaghara akọwapụtara ntaramahụhụ a.
Akụkụ
Ntuziaka nkwụnye
Mara:
- Iji eriri eriri njikọ, etinyebeghị akụkụ plastik A na B. Tupu ịmalite ike na ngwaahịa, biko bulite akụkụ A na B na-ele anya n'ime oche dị n'ihu n'akụkụ aka nri wee n'akụkụ aka ekpe ya na mmegharị rotary dị ka egosiri na ọnụ ọgụgụ ahụ.
Mgbakọ nke akụkụ plastik A na B na-ahapụ ka iru nchekwa eletrik dị ukwuu maka onye ọrụ.
Mechanical na Electric nkọwa
Ịnye ọkụ:
230 Vac, +10…-15% UP2A *******, UP2F *******;
24 Vac + 10%/-15% 50/60 Hz,
28 ruo 36 Vdc +10 ruo -15% UP2B *******, UP2G *******;
Ntinye ike kachasị: 25 VA
Mkpuchi n'etiti ọkụ ọkụ na ngwá ọrụ
- mod. 230Vac: agbadoro
- mod. 24Vac: agbadoro site na ọkọnọ ike nke nchekwa nchekwa
Max mptage njikọ J1 na site na J16 ruo J24: 250 Vac;
Akụkụ kacha nta nke wires - mmepụta dijitalụ: 1,5 mm
Akụkụ kacha nta nke wires nke njikọ ndị ọzọ niile: 0,5mm
Mara: maka cabling mmepụta dijitalụ ma ọ bụrụ na ejiri ngwaahịa a na 70°C ambient okpomọkụ 105°C akwadoro ga-eji.
Ịnye ọkụ
Ụdị: +Vdc, +5Vr maka ike ọkọnọ maka mpụga nyocha, 12Vdc maka ọnụ ike ọkọnọ
Enyere ọkụ ọkụ voltage (+ Vdc): 26Vdc ± 15% maka ụdị 230Vac ike ọkọnọ (UP2A********, UP2F *******),
21Vdc ± 5% maka ụdị 24Vac ike ọkọnọ (UP2B *******, UP2G********)
Oke dị ugbu a +Vdc: 150mA, mkpokọta ewepụtara na njikọ niile, echebe ya pụọ na mkpirisi okirikiri
Enyere ọkụ ọkụ voltage (+5Vr): 5Vdc ±2%
Kachasị dị ugbu a (+ 5Vr): 60mA, mkpokọta ewepụtara na njikọ niile, echebe ya pụọ na mkpirisi okirikiri
Enyere ọkụ ọkụ voltage (Vout): 26Vdc ± 15% maka ụdị 230Vac ike ọkọnọ (UP2A********, UP2F *******),
21Vdc ± 5% Max dị ugbu a (Vout) (J9): 100mA, dabara maka ọkọnọ ike
THTUNE CAREL ọdụ, echedoro pụọ na mkpirisi okirikiri
Nkọwapụta ngwaahịa
Ebe nchekwa mmemme (FLASH): 4MB (2MB BIOS + 2MB mmemme ngwa)
Nkezi elekere ime: 100 ppm
Ụdị batrị: batrị bọtịnụ lithium (nke a na-ewepụ), CR2430, 3 Vdc
Njirimara ndụ batrị nke batrị enwere ike ibughari: afọ 8 kacha nta na ọnọdụ arụ ọrụ nkịtị
Iwu maka nnọchi batrị: Agbanwela batrị, kpọtụrụ ndị ahịa nke Carel maka ịgbanwe
Ojiji nke batrị: A na-eji batrị naanị maka ịgba ọsọ nke elekere ime mgbe agbanyereghị ya yana ịchekwa data n'ụdị ebe nchekwa T nke ngwa ngwa. Dochie batrị ma ọ bụrụ na emeliteghị oge mgbe ịmalitegharịa ngwaahịa ahụ
Orụ ọrụ dị
Ụdị: niile pGD ọnụ na njikọ J15, PLD ọnụ na njikọ J10,
THTune na njikọ J9.
Ogologo oke maka ọnụ ọnụ PGD: 2m site na njikọ ekwentị J15,
50m site na ọta-USB AWG24 jikọtara na ala ma akụkụ na akụkụ eletrọnịkị
Oke. ọnụ ọgụgụ nke interface onye ọrụ: Otu interface onye ọrụ nke ezinụlọ pGD na njikọ J15 ma ọ bụ J14. Otu interface onye ọrụ Thune na J9 njikọ, ma ọ bụ ọzọ PLD ọnụ na njikọ J10 na-ahọrọ tLAN protocol na on board dip switch.
Ahịrị nkwukọrịta dị
Ụdị: RS485, Nna-ukwu maka FieldBus1, Ohu maka BMS 2, pLAN
N. ber nke ahịrị dị: 1 ahịrị anaghị ewepụ mkpuchi na J11 njikọ (BMS2).
Ahịrị 1 anaghị ahọrọ mkpuchi mkpuchi na J9 njikọ (Fieldbus), ma ọ bụrụ na ejighị ya site na pLD njirimara interface na J10 njikọ.
Ahịrị 1 anaghị ahọrọ mkpuchi mkpuchi na J14 njikọ (pLAN), ma ọ bụrụ na ejighi ya site na pGD onye ọrụ na njikọ J15.
1 nhọrọ (J13), nke a na-ahọrọ na nhọrọ Carrel
Ogologo eriri njikọ kachasị elu: 2m na-enweghị eriri-ọta, 500m site na eriri ọta AWG24 jikọtara na ala ma akụkụ na akụkụ njikwa eletrọnịkị.
Njikọ kacha ogologo
Ntinye dijitalụ zuru ụwa ọnụ na ihe niile na-enweghị nkọwapụta dị iche iche: ihe na-erughị 10m
Mpụta dijitalụ: ihe na-erughị 30m
Ahịrị Oghere Usoro: lelee ihe ngosi na ngalaba dabara adaba
Ọnọdụ ọrụ
Nchekwa: -40T70 Celsius, 90% rH na-abụghị condensing
Na-arụ ọrụ: -40T70 °C, 90% rH na-abụghị condensing
Mechanical nkọwa
Akụkụ: 13 DIN rail modul, 228 x 113 x 55 mm
Nnwale nrụgide bọọlụ: 125 °C
Ngwa nwere gas refrigerant na-ere ọkụ
Maka iji gas refrigerant na-ere ọkụ, enyochala ndị njikwa akọwara n'ime akwụkwọ a wee kpebie na ha dabara.
IEC 60335 usoro ụkpụrụ ndị a:
- Mgbakwunye CC nke IEC 60335-2-24: 2010 zoro aka na nkeji 22.109 na Mgbakwunye BB nke IEC 60335-2-89: 2010 zoro aka na nkeji 22.108; A nwalere ihe ndị na-emepụta arcs ma ọ bụ sparks n'oge arụ ọrụ nkịtị ma chọpụta na ha na-agbaso ihe achọrọ na UL/IEC 60079-15;
- IEC/EN/UL 60335-2-24 (nkebiokwu 22.109, 22.110) maka friji na ụlọ;
- IEC / EN / UL 60335-2-40 (nkebi ahịrịokwu 22.116, 22.117) maka nfuli ọkụ ọkụ eletrik, ikuku-conditioners na dehumidifiers;
- IEC/EN/UL 60335-2-89 (okwu 22.108, 22.109) maka ngwa friji azụmahịa.
Achọpụtara ndị na-ahụ maka njikwa maka oke okpomọkụ nke akụrụngwa niile, nke n'oge ule nke IEC 60335 cl chọrọ. 11 na 19 anaghị agafe 268 ° C.
Nkwenye nke ndị njikwa ndị a na ngwa eji emecha eme ebe a na-eji gas refrigerant na-ere ọkụ ga-abụkwa ọzọviewed na ikpe na njedebe ojiji ngwa.
Nkọwapụta ndị ọzọ
Mmetọ gburugburu ebe obibi: ọkwa 2
Ndekọ nchekwa: IP00
Klas dị ka nchedo megide ujo ọkụ eletrik: a ga-etinye n'ime ngwa klaasị I na/ma ọ bụ II
Ihe mkpuchi: PTI175. Oke mkpali voltagihe: 2.500V.
Oge nrụgide n'ofe akụkụ mkpuchi: ogologo
Ụdị ihe omume: 1.C (Relays); 1.Y (110/230V SSR), SSR 24Vac nkewa eletrọnịkị anaghị ekwe nkwa
Ụdị nkwụsịtụ ma ọ bụ mgbanwe micro: ụdị mgbanwe micro nke iguzogide okpomọkụ na ọkụ: ụdị D (UL94 - V2)
Mgbochi megide voltage na-arị elu: ngalaba II
klaasị software na nhazi ya: Klas A
Ka ịghara imetụ ma ọ bụ kwado ngwaahịa ahụ mgbe etinyere ọkụ
CAREL nwere ikike ịgbanwe atụmatụ nke ngwaahịa ya na-enweghị ọkwa mbụ
Ụlọ ọrụ CAREL Industries HQ
Site na dell'Industria, 11 – 35020 Brugine – Padova (Italy)
Tel. (+39) 0499716611 – Faksị (+39) 0499716600
ozi-e: carel@carel.com
www.carel.com
+050001592 - rel. 1.3 ụbọchị 31.10.2022
Akwụkwọ / akụrụngwa
 |
CAREL µPCII- Onye njikwa arụnyere n'ime mmemme nwere na enweghị mkpuchi [pdf] Ntuziaka 050001592. |