BANNER R45C Input-Output ea Analog ho IO-Link Device Converter
Tataiso ea ho Qala ka Potlako
This guide is designed to help you set up and install the R45C In-Out Analog to IO-Link Device Converter. For complete information on programming, performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at www.bannerengineering.com. Batla p/n 223053 ho view Buka ea Litaelo. Tšebeliso ea tokomane ena e nka ho tloaelana le litekanyetso le mekhoa e sebetsang ea indasteri.
- Compact analog to IO-Link device converter e hlahisang boleng ba analoge, voltage kapa ea hajoale, joalo ka ha e hlahisoa ke IO-Link Master
- Mofetoleli o boetse o hokahana le mohloli oa analoge, voltage kapa ea hajoale, mme e hlahisa boleng ho master ea IO-Link
- Moralo o matsutla-tsutla o bopehileng ho feta tekano o kopana le IP65, IP67, le IP68 · E hokahana ka kotloloho le sensor kapa kae kapa kae moleng hore e sebelisoe habonolo.
Fetileview
Analog In
Ha boleng ba tlhahiso ea analoge bo amoheloa ke converter ena, boleng ba boemeli ba linomoro bo romeloa ho IO-Link Master ka Process Data In (PDI).PDI Analog Ranges:
- Moqtage = 0 mV ho isa ho 10,000 mV
- Hona joale = 4,000 µA ho isa ho 20,000 µA
Analog Out
Mofetoleli ona o boetse o lumella mosebedisi ho hlahisa boleng ba analog ka ho romela boleng ba analoge ea linomoro ho tloha ho IO-Link Master ka Process Data Out (PDO).
Mekhahlelo ea Analog ea PDO:
- Moqtage = 0 mV ho isa ho 11,000 mV
- Hona joale = 0 µA ho isa ho 24,000 µA
PDO Outside Valid Range (POVR)
Haeba boleng ba PDO bo rometsoeng ho converter ena bo le ka ntle ho boleng ba PDO Analog Range, joale boleng ba sebele ba analog bo tla behoa ho e 'ngoe ea maemo a mararo a khethiloeng a POVR ka mor'a tieho ea metsotsoana e 2:
- Tlase (ka ho feletseng): 0 V kapa 3.5 mA
- Holimo: 10.5 V kapa 20.5 mA
- Tšoara: Boemo bo boloka boleng ba pele ka ho sa feleng
Hlokomela: Haeba sensor ea IO-Link e hokahaneng e fetoloa ho khutlela ho SIO mode, joale boleng bo fetileng bo tla tšoaroa.
Lipontšo tsa Boemo
The R45C In-Out Analog to IO-Link Device Converter e na le matšoao a mabeli a amber LED mahlakoreng ka bobeli bakeng sa IO-link le puisano ea analog ho lumella litlhoko tsa ho kenya le ho fana ka ponahalo e lekaneng ea ponahalo. Ho boetse ho na le letšoao le letala la LED mahlakoreng ka bobeli a converter, e bontšang boemo ba matla a sesebelisoa.
|
IO-Link Amber LED |
|
| Pontsho | Boemo |
| E tima | Lipuisano tsa IO-Link ha li eo |
| Amber e Benyang (900 ms On, 100 ms Off) | Likhokahano tsa IO-Link lia sebetsa |
|
Analog ka Amber LED |
|
| Pontsho | Boemo |
| E tima | Boleng ba hona joale ba analoge bo ka tlase ho setpoint SP1 KAPA boleng ba analoge bo boholo ho feta setpoint SP2 |
| Amber e tiileng | Theko ea hona joale ea analoge e pakeng tsa setpoint SP1 LE setpoint SP2 |
| Maemo a Kamehla a Hona Joale: • SP1 = 0.004 A • SP2 = 0.02 A |
Moqtage Litekanyetso: • SP1 = 0 V • SP2 = 10 V |
| Analog Out Amber LED | |
| Pontsho | Boemo |
| E tima | E ea tima haeba boleng ba analoge ba PDO bo ngotsoeng bo le ka ntle ho sebaka se lumelletsoeng sa tlhahiso |
| Amber e tiileng | E bulela haeba boleng ba analog ba PDO bo ngotsoeng bo le ka har'a mefuta e lumelletsoeng ea tlhahiso |
| Sebaka sa Hona Joale se lumelletsoeng: 0 mA ho isa ho 24 mA Allowable VoltagE Range: 0 V ho 11 V |
|
Ho kenya Mechine
Kenya R45C ho lumella phihlello bakeng sa licheke tsa ts'ebetso, tlhokomelo, le litšebeletso kapa tse ling. Se ke oa kenya R45C ka tsela e joalo ho lumella ho hloloa ka boomo.
Lisebelisoa tsohle tse kenyang li fanoa ke mosebelisi. Li-fasteners li tlameha ho ba le matla a lekaneng ho itebela khahlanong le ho robeha. Tšebeliso ea li-fasteners tse sa feleng kapa lisebelisoa tsa ho notlela li khothaletsoa ho thibela ho lokoloha kapa ho falla ha sesebelisoa. Sekoti se kenyang (4.5 mm) ho R45C se amohela M4 (#8) hardware. Sheba setšoantšo se ka tlase ho thusa ho fumana bolelele ba bonyane ba screw.
TLHOKOMELISO: Se ke oa tiisa sekoere-khoere sa R45C nakong ea ho kenya.
Ho tiisa ho feta tekano ho ka ama tshebetso ya R45C
Litlhaloso
Phepelo Voltage
18 V DC ho isa ho 30 V DC ho 50 mA boholo
Power Pass-Trough Current
4 Boholo
Supply Protection Circuitry
E sirelelitsoe khahlanong le polarity e ka morao le matla a nakoanatages
Leakage Current Immunity
400µA
Qeto
14 likotoana
Ho nepahala
0.5%
Lipontšo
Botala: Matla
Amber: Lipuisano tsa IO-Link
Amber: Boleng ba tlhahiso ea analog bo teng
Amber: Boleng ba tlhahiso ea analog ka har'a mefuta
Lihokelo
Kakaretso ea monna/motšehali 4-pin M12 e khaola kapele
Kaho
Lintho tse Kopantsoeng: Koporo e entsoeng ka nickel
'Mele oa Khokahanyo: PVC e letšo e khanyang
Ho sisinyeha le ho Shoa ha Mechini
E kopana le litlhoko tsa IEC 60068-2-6 (Vibration: 10 Hz ho 55 Hz, 0.5 mm amplitude, metsotso e 5 ho fiela, metsotso e 30 ho lula)
E kopana le litlhokahalo tsa IEC 60068-2-27 (Tšisinyeho: 15G 11 ms nako, halofo ea sine wave)
Setifikeiti
Tikoloho Rating
IP65, IP67, IP68
Mofuta oa 1 oa NEMA/UL
Maemo a Tshebetso
Mocheso: -40 °C ho ea +70 °C (-40 °F ho +158 °F) 90% ho +70 °C boholo ba mongobo o lekanyelitsoeng (o sa nyenyefatseng)
Mocheso oa polokelo: -40 °C ho ya +80 °C (–40 °F ho ya +176 °F)
Ho Hlokahala Overcurrent Tshireletso
TLHOKOMELISO: Likhokelo tsa motlakase li tlameha ho etsoa ke basebetsi ba nang le litsebo ho latela melao le melaoana ea motlakase ea lehae le ea naha.
Tšireletso ea overcurrent e hlokeha ho fanoa ka kopo ea sehlahisoa sa ho qetela ho latela tafole e fanoeng.
Tšireletso ea overcurrent e ka fanoa ka fusing ea kantle kapa ka Current Limiting, Class 2 Power Supply.
Lisebelisoa tsa marang-rang <24 AWG li ke ke tsa aroloa.
Bakeng sa tšehetso e eketsehileng ea sehlahisoa, e ea ho www.bannerengineering.com.
| Supply Wiring (AWG) | Tšireletso e Hlokehang ea Overcurrent (Amps) |
| 20 | 5.0 |
| 22 | 3.0 |
| 24 | 2.0 |
| 26 | 1.0 |
| 28 | 0.8 |
| 30 | 0.5 |
Banner Engineering Europe Park
Lane, Culliganlaan 2F bese 3, 1831 Diegem, BELGIUM
Turck Banner LTD Blenheim
House, Blenheim Court, Wickford, Essex SS11 8YT, Great Britain
Banner Engineering Corp. e fana ka tumello ea hore lihlahisoa tsa eona li se be le bofokoli ba thepa le moetso oa selemo ka mor'a letsatsi la ho romelloa. Banner Engineering Corp. e tla lokisa kapa e nkele sebaka, ntle ho tefo, sehlahisoa leha e le sefe sa tlhahiso ea sona seo, ka nako eo se khutlisetsoang fekthering, se fumanoang se se na phoso nakong ea tiisetso. Tiisetso ena ha e kenyeletse tshenyo kapa molato bakeng sa tshebediso e mpe, tlhekefetso, kapa tshebediso e fosahetseng kapa ho kenya sehlahiswa sa Banner.
TIISETSO ENA E LEKANETSO KE E KHETHEHILENG LE LITEKENG TSA LITIISETSO TSE LING TSOHLE E KA BA E BONAHALA KAPA E BONAHALA (Ho kenyeletsoa, ntle le MOEDI, TIISETSO EFE KAPA EFE EA THEKISO KAPA HO LOKELANG HO FIHLELA MORERO O KHETHEHILENG), MME LE HO TSA TSAMAISO HO TSOHLE. SEBELISA MOKHOEOA.
Tiisetso ena e ikhethile ebile e lekanyelitsoe ho lokisoa kapa, ho ea ka khetho ea Banner Engineering Corp., e ncha. HA HO TSOHLE BANNER ENGINEERING CORP. E TLA IKARABELA HO MOREKI KAPA MOTHO MANG KAPA MANG KAPA MOKHATLO BAKENG SA LITEHELO TSE EKETSEHILENG, LITJEHO, TAHLEHELO, TAHLEHELO EA LIKHETHO, KAPA KETSAHALO EFE KAPA E FE KAPA E FE KAPA E FELENG KAPA E KHETHEHILENG E SENYA SETSO TSE LING TSA SETSO. HO SEBELISA SEHLAHISO, E KA BA HO HLAHALA KA KONTERANAKA KAPA TIISETSO, MOLAO, TORT, MOLATO OO O TSAMAILENG, BOHLOKO, KAPA TSE NG.
Banner Engineering Corp. e na le tokelo ea ho fetola, ho fetola kapa ho ntlafatsa moralo oa sehlahisoa ntle le ho nka boitlamo kapa mekoloto e amanang le sehlahisoa sefe kapa sefe se neng se entsoe pele ke Banner Engineering Corp. Tšebeliso e mpe, tšebeliso e mpe, tšebeliso e mpe kapa kopo e sa nepahalang ea sehlahisoa sena kapa tšebeliso. ea sehlahisoa bakeng sa lits'ebetso tsa ts'ireletso ea motho ha sehlahisoa se tsejoa e le se sa rereloang merero e joalo, se tla hlakola tiisetso ea sehlahisoa. Liphetoho life kapa life ho sehlahisoa sena ntle le tumello e boletsoeng esale pele ke Banner Engineering Corp li tla hlakola liwaranti tsa sehlahisoa. Litlhaloso tsohle tse hatisitsoeng tokomaneng ena li ka fetoha; Banner e na le tokelo ea ho fetola lintlha tsa sehlahisoa kapa ho ntlafatsa litokomane ka nako efe kapa efe. Litlhaloso le lintlha tsa sehlahisoa ka Senyesemane li nka sebaka sa tse fanoeng ka puo efe kapa efe. Bakeng sa mofuta oa morao-rao oa litokomane life kapa life, sheba ho: www.bannerengineering.com.
Bakeng sa lintlha tsa patent, bona www.bannerengineering.com/patents.
Karolo ea 15 ea FCC
Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC. Ts'ebetso e itšetlehile ka maemo a mabeli a latelang: 1) Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi; le 2) Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.
Indasteri Canada
Sesebelisoa sena se lumellana le CAN ICES-3 (B)/NMB-3(B). Ts'ebetso e itšetlehile ka maemo a mabeli a latelang: 1) Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi; le 2) Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.
Seaparo sena se lumellana le la Norme NMB-3(B). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas occasionner d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement dussoutiférence.
Litokomane / Lisebelisoa
 |
BANNER R45C Input-Output ea Analog ho IO-Link Device Converter [pdf] Bukana ea Mosebelisi R45C, Analog Input-Output to IO-Link Device Converter, R45C Analog Input-Output to IO-Link Device Converter, Input-Output to IO-Link Device Converter, IO-Link Device Converter, Device Converter, Converter |
