BANNER R45C Analog Input-Output i IO-Link Device Converter Guide

This guide is designed to help you set up and install the R45C In-Out Analog to IO-Link Device Converter. For complete information on programming, performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at www.bannerengineering.com. Huli no p/n 223053 to view ka Papa kuhikuhi. ʻO ka hoʻohana ʻana i kēia palapala manaʻo e kamaʻāina i nā kūlana a me nā hana ʻoihana pili.

Mea hoʻololi like i ka IO-Link mea hoʻololi e hoʻopuka ana i kahi waiwai analog, voltage a i ʻole kēia manawa, e like me ka hōʻike ʻana e ka IO-Link Master
Hoʻopili pū ka mea hoʻololi i kahi kumu analog, voltage a i kēia manawa, a hoʻopuka i ka waiwai i ka haku IO-Link

ʻO ka hoʻolālā i hoʻoheheʻe ʻia i hoʻoheheʻe ʻia e hui me IP65, IP67, a me IP68 · Hoʻopili pololei i kahi sensor a i ʻole ma kahi o ka laina no ka maʻalahi o ka hoʻohana.

Pauview

Analog In

Ke loaʻa ka waiwai hoʻokomo analog e kēia mea hoʻololi, hoʻouna ʻia ka waiwai hōʻike helu i kahi IO-Link Master ma o ka Process Data In (PDI). PDI Analog Ranges:

Voltage = 0 mV a 10,000 mV
ʻO kēia manawa = 4,000 µA i 20,000 µA

Analog Out

Hāʻawi kēia mea hoʻololi i ka mea hoʻohana e hoʻopuka i kahi waiwai analog ma ka hoʻouna ʻana i ka waiwai analog helu mai ka IO-Link Master ma o Process Data Out (PDO).
PDO Analog Range:

Voltage = 0 mV a 11,000 mV

ʻO kēia manawa = 0 µA i 24,000 µA

PDO ma waho o ka palena kūpono (POVR)

Inā ʻo ka waiwai PDO i hoʻouna ʻia i kēia mea hoʻololi ma waho o ka waiwai Analog Range PDO, a laila e hoʻonohonoho ʻia ka waiwai hoʻopuka analog maoli i kekahi o nā pae POVR koho ʻekolu ma hope o ka lohi 2 kekona:

Haʻahaʻa (paʻamau): 0 V a i ʻole 3.5 mA
Kiʻekiʻe: 10.5 V a i ʻole 20.5 mA

Paʻa: Paʻa ka pae i ka waiwai mua no ka pau ʻole

Nānā: Inā hoʻololi hou ʻia kahi sensor IO-Link pili i ke ʻano SIO, a laila e paʻa ka waiwai mua.

Nā Hōʻike Kūlana

ʻO ka R45C In-Out Analog to IO-Link Device Converter he ʻelua mau hōʻailona LED amber ma nā ʻaoʻao ʻelua no IO-link a me nā kamaʻilio analog e ʻae ai i nā pono hoʻonohonoho a hāʻawi mau i ka ʻike hōʻike kūpono. Aia kekahi hōʻailona LED ʻōmaʻomaʻo ma nā ʻaoʻao ʻelua o ka mea hoʻololi, e hōʻailona ana i ke kūlana mana o ka mea.

IO-Link Amber LED
Hōʻike	Kūlana
Paʻa	ʻAʻole i loaʻa nā kamaʻilio IO-Link
ʻO Amber ʻalohilohi (900 ms On, 100 ms Off)	Hoʻoikaika nā kamaʻilio IO-Link

Analog I Amber LED
Hōʻike	Kūlana
Paʻa	ʻOi aku ka waiwai analog o kēia manawa ma mua o ka setpoint SP1 OR ʻoi aku ka nui o ka waiwai analog ma mua o ka setpoint SP2
Amber paʻa	Aia ka waiwai like o kēia manawa ma waena o ka setpoint SP1 a me ka setpoint SP2
Nā Waiwai o kēia manawa: • SP1 = 0.004 A • SP2 = 0.02 A	Paʻamau Voltage Waiwai: • SP1 = 0 V • SP2 = 10 V

Analog Out Amber LED
Hōʻike	Kūlana
Paʻa	Hoʻopio inā aia ka waiwai analog PDO i kākau ʻia ma waho o ka laulima puka ʻae ʻia
Amber paʻa	Huli ʻia inā aia ka waiwai analog PDO i kākau ʻia i loko o ka laulā puka i ʻae ʻia
ʻAe ʻia o kēia manawa: 0 mA a 24 mA ʻAe ʻia Voltage Māhele: 0 V a 11 V

Hoʻokomo Mechanical

E hoʻouka i ka R45C no ka ʻae ʻana i ke komo no nā loiloi hana, mālama, a me ka lawelawe a i ʻole ke pani. Mai hoʻokomo i ka R45C ma ke ʻano e ʻae ai i ka lanakila ʻana.

Hāʻawi ʻia nā lako hoʻopili āpau e ka mea hoʻohana. Pono e lawa ka ikaika o nā mea paʻa e pale aku i ka haki ʻana. Paipai ʻia ka hoʻohana ʻana i nā mea paʻa paʻa a paʻa paha e pale i ka wehe ʻana a i ʻole ka neʻe ʻana o ka hāmeʻa. ʻO ka lua kau (4.5 mm) i ka R45C e ʻae i ka lako M4 (#8). E ʻike i ke kiʻi ma lalo nei e kōkua i ka hoʻoholo ʻana i ka lōʻihi o ka wili liʻiliʻi.

ALOHA: Mai hoʻopaʻa i ka wili hoʻopili o R45C i ka wā e hoʻokomo ai.
Hiki ke hoʻololi i ka hana o ka R45C

Nā kikoʻī

Lako Voltage

18 V DC i 30 V DC ma 50 mA ka nui

ʻO ka mana hele i kēia manawa

4 A ʻoi

Kaapuni hoomalu lako

Pale ʻia mai ka polarity hoʻohuli a me ka vol transienttages

Leakage Ka palekana o kēia manawa

400 µA

Olelo Hooholo

14 bit

Ka pololei

0.5%

Nā hōʻailona

ʻOmaomao: Mana
Amber: IO-Link kamaʻilio
Amber: Ka waiwai hoʻokomo analog i kēia manawa
Amber: Ka waiwai hoʻopuka analog ma ka laulā

Hoʻohui

Hoʻokuʻu koke ʻia ke kāne/wahine 4-pin M12

Kūkulu

Mea hoʻopili: keleawe-plated nikela
Kino mea hoʻohui: PVC translucent ʻeleʻele

ʻO ka haʻalulu a me ka haʻalulu mīkini

Hoʻokō i nā koi IEC 60068-2-6 (Vibration: 10 Hz a i 55 Hz, 0.5 mm amplitude, 5 minuke kahili, 30 mau minuke noho)
Hoʻokō i nā koi IEC 60068-2-27 (Shock: 15G 11 ms ka lōʻihi, hapalua hawewe sine)
Nā palapala hōʻoia

Pili Kaiapuni

IP65, IP67, IP68
NEMA/UL ʻAno 1

Nā Kūlana Hana

Mahana: –40 °C a i +70 °C (–40 °F a i +158 °F) 90% ma +70 °C kiʻekiʻe loa o ka haʻahaʻa haʻahaʻa (ʻaʻole condensing)
Mahana Waihona: –40 °C a i +80 °C (–40 °F a i +176 °F)

Pono ʻia ʻo Overcurrent Protection

'Ōlelo Aʻo: Pono e hana ʻia nā hoʻohui uila e nā limahana kūpono e like me nā code a me nā kānāwai uila kūloko a me ke aupuni.
Pono e hoʻolako ʻia ka pale overcurrent e ka noi huahana hope ma ka papa i hoʻolako ʻia.
Hiki ke hāʻawi ʻia ka pale overcurrent me ka fusing o waho a i ʻole ma o Current Limiting, Class 2 Power Supply.
ʻAʻole e hoʻopili ʻia nā alakaʻi uwea hoʻolako <24 AWG.
No ke kākoʻo huahana hou aku, e hele i www.bannerengineering.com.

Hoʻolako Wiring (AWG)	Pono ʻia ʻo Overcurrent Protection (Amps)
20	5.0
22	3.0
24	2.0
26	1.0
28	0.8
30	0.5

Pāka ʻEnekinia Banner ʻEulopa
Lane, Culliganlaan 2F bus 3, 1831 Diegem, BELGIUM

ʻO Turck Banner LTD Blenheim
Hale, Aha Blenheim, Wickford, Essex SS11 8YT, Beritania Nui

Palapala Hoʻopaʻa Palekana ʻo Banner Engineering Corp

Hoʻokuʻu ʻia ʻo Banner Engineering Corp. i kāna mau huahana mai nā hemahema o ka waiwai a me ka hana no hoʻokahi makahiki ma hope o ka lā i hoʻouna ʻia ai. E hoʻoponopono a hoʻololi paha ʻo Banner Engineering Corp., me ka uku ʻole, i kekahi huahana o kāna hana ʻana, i ka manawa i hoʻihoʻi ʻia ai i ka hale hana, ʻike ʻia ua hemahema i ka wā o ka palapala hōʻoia. ʻAʻole uhi kēia palapala hōʻoia i ka pōʻino a i ʻole ke kuleana no ka hoʻohana hewa ʻana, ka hana ʻino, a i ʻole ka noi kūpono ʻole a i ʻole ka hoʻokomo ʻana i ka huahana Banner.
HE HOʻOPIʻI KĀWAI ʻAʻole kēia a ma kahi o nā palapala hōʻoia ʻē aʻe a pau inā i hōʻike ʻia a i ʻole ka ʻōlelo ʻia (me ka ʻole o ka palena ʻole, nā palapala hōʻoia no ke kūʻai ʻana a i ʻole kūpono no kahi kumu kūʻokoʻa), a me ka hoʻomaka ʻana o ka hana ma lalo o ka hana. HOOLAHA.
He kūʻokoʻa kēia Warranty a kaupalena ʻia no ka hoʻoponopono ʻana a i ʻole, ma ka manaʻo o Banner Engineering Corp. ʻAʻole e kuleana ʻo BANNER ENGINEERING CORP. I ka mea kūʻai aku a i ʻole kekahi kanaka ʻē aʻe a i ʻole nā mea ʻē aʻe no nā kumu kūʻai hou aku, nā lilo, nā poho, nā poho o ka loaʻa, a i ʻole nā mea ʻokoʻa, hopena a i ʻole nā pōʻino kūikawā i loaʻa mai i kekahi o nā huahana mai ka US. No ka hoʻohana ʻana i ka huahana, inā e kū mai ana ma ka ʻaelike a i ʻole ka palapala hōʻoia, ke kānāwai, ka hewa, ke kuleana koʻikoʻi, ka mālama ʻole, a i ʻole nā mea ʻē aʻe.
Mālama ʻo Banner Engineering Corp. i ke kuleana e hoʻololi, hoʻololi a hoʻomaikaʻi paha i ka hoʻolālā ʻana o ka huahana me ka manaʻo ʻole i nā kuleana a i ʻole nā kuleana e pili ana i kekahi huahana i hana mua ʻia e Banner Engineering Corp. ʻO ka huahana no nā noi pale pilikino ke ʻike ʻia ka huahana ʻaʻole i manaʻo ʻia no ia mau kumu e kāpae ʻia ka palapala hoʻokō huahana. ʻO nā hoʻololi i kēia huahana me ka ʻae ʻole ʻia e Banner Engineering Corp e hoʻopau i nā palapala hōʻoia huahana. Hiki ke hoʻololi i nā kikoʻī a pau i paʻi ʻia ma kēia palapala; Mālama ʻo Banner i ke kuleana e hoʻololi i nā kikoʻī huahana a i ʻole e hoʻohou i nā palapala i kēlā me kēia manawa. ʻO nā kikoʻī a me ka ʻike huahana ma ka ʻōlelo Pelekania ma mua o ka mea i hāʻawi ʻia ma kekahi ʻōlelo ʻē aʻe. No ka mana hou loa o kekahi palapala, e nānā i: www.bannerengineering.com.
No ka ʻike patent, e ʻike www.bannerengineering.com/patents.

FCC Māhele 15
Hoʻopili kēia mea hana i ka Māhele 15 o nā Rula FCC. Aia ka hana ma lalo o nā kūlana ʻelua: 1) ʻAʻole hiki i kēia hāmeʻa ke hoʻopilikia ʻino; a me 2) Pono kēia mea hana e ʻae i nā mea hoʻopilikia i loaʻa, me ka hoʻopili ʻana i hiki ke hoʻokō i ka hana makemake ʻole.

ʻOihana Kanada
Hoʻopili kēia mea hana me CAN ICES-3 (B)/NMB-3(B). Aia ka hana ma lalo o nā kūlana ʻelua: 1) ʻAʻole hiki i kēia hāmeʻa ke hoʻopilikia ʻino; a me 2) Pono kēia mea hana e ʻae i nā mea hoʻopilikia i loaʻa, me ka hoʻopili ʻana i hiki ke hoʻokō i ka hana makemake ʻole.
E like me ka mea maʻamau o NMB-3(B). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas occasionner d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du dispositif.

Palapala / Punawai

ʻO BANNER R45C Analog Input-Output i IO-Link Device Converter [pdf] Ke alakaʻi hoʻohana
R45C, Hoʻokomo-Hanaʻike Analog i ka mīkini hoʻololi IO-Link, R45C Hoʻokomo-Hanaʻike Analog i ka mīkini hoʻololi IO-Link, hoʻokomo-Hana i ka mīkini hoʻololi IO-Link, ka mea hoʻololi mea hoʻololi IO-Link, ka mīkini hoʻololi, ka mea hoʻololi.

Nā kuhikuhi

Palapala Hoʻohana

Alakaʻi hoʻomaka wikiwiki