BANNER R45C Analog Input-Output rau IO-Txuas Device Converter
Phau Ntawv Qhia Pib Ceev
This guide is designed to help you set up and install the R45C In-Out Analog to IO-Link Device Converter. For complete information on programming, performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at www.bannerengineering.com. Nrhiav rau p/n 223053 rau view phau ntawv qhia. Kev siv cov ntaub ntawv no suav nrog kev paub txog cov qauv kev lag luam thiab kev coj ua.
- Compact analog rau IO-Link ntaus ntawv converter uas outputs tus nqi analog, voltage lossis tam sim no, raws li qhia los ntawm IO-Link Master
- Lub converter kuj txuas mus rau ib qho chaw analog, voltage los yog tam sim no, thiab outputs tus nqi rau IO-Link master
- Rugged tshaj-molded tsim raws li IP65, IP67, thiab IP68 · Txuas ncaj qha mus rau lub sensor lossis nyob txhua qhov chaw hauv kab kom yooj yim siv
Tshajview
Analog hauv
Thaum tus nqi analog input tau txais los ntawm qhov hloov pauv no, tus lej sawv cev tus nqi raug xa mus rau IO-Link Master ntawm Txheej Txheem Cov Ntaub Ntawv Hauv (PDI).PDI Analog Ranges:
- Voltage = 0 mV to 10,000 mV
- Tam sim no = 4,000 µA txog 20,000 µA
Analog tawm
Cov converter no kuj tso cai rau tus neeg siv kom tso tawm tus nqi analog los ntawm kev xa cov lej analog nqi los ntawm IO-Link Master ntawm Txheej Txheem Cov Ntaub Ntawv Tawm (PDO).
PDO Analog Ntau Yam:
- Voltage = 0 mV to 11,000 mV
- Tam sim no = 0 µA txog 24,000 µA
PDO Outside Valid Range (POVR)
Yog tias tus nqi PDO xa mus rau lub converter no yog sab nraud ntawm PDO Analog Range tus nqi, ces tus nqi analog tso tawm tiag tiag yuav raug teeb tsa rau ib qho ntawm peb qib POVR xaiv tau tom qab 2 thib ob ncua sijhawm:
- Tsawg (default): 0 V lossis 3.5 mA
- Qhov siab: 10.5V lossis 20.5mA
- Tuav: Qib khaws cov nqi yav dhau los indefinitely
Nco tseg: Yog tias qhov txuas IO-Link sensor hloov rov qab mus rau SIO hom, ces tus nqi dhau los yuav raug tuav.
Qhov taw qhia xwm txheej
R45C In-Out Analog rau IO-Link Device Converter muaj ob lub teeb pom kev zoo LED ntawm ob sab rau IO-txuas thiab kev sib txuas lus analog kom tso cai rau kev teeb tsa kev xav tau thiab tseem muab kev pom zoo txaus. Kuj tseem muaj qhov taw qhia ntsuab LED ntawm ob sab ntawm lub converter, uas qhia txog lub zog ntawm lub cuab yeej.
|
IO-Txuas Amber LED |
|
| Qhov taw qhia | xwm txheej |
| Tawm | IO-Link kev sib txuas lus tsis muaj nyob |
| Flashing Amber (900 ms On, 100 ms Tawm) | IO-Link kev sib txuas lus tau ua haujlwm |
|
Analog hauv Amber LED |
|
| Qhov taw qhia | xwm txheej |
| Tawm | Analog tam sim no tus nqi tsawg dua setpoint SP1 LOSSIS analog nqi ntau dua setpoint SP2 |
| Khoom Amber | Analog tam sim no tus nqi yog nruab nrab ntawm setpoint SP1 THIAB setpoint SP2 |
| Default Current Values: • SP1 = 0.004 A • SP2 = 0.02 A |
Default Voltage Tus nqi: • SP1 = 0 V • SP2 = 10 V |
| Analog Tawm Amber LED | |
| Qhov taw qhia | xwm txheej |
| Tawm | Tig tawm yog tias sau PDO analog nqi yog sab nraum qhov tso zis ntau yam |
| Khoom Amber | Tig rau yog tias sau PDO analog nqi yog nyob rau hauv qhov tso zis ntau yam |
| Tso cai tam sim no ntau yam: 0 mA txog 24 mA Tso cai Voltage Range: 0V txog 11V |
|
Mechanical Installation
Nruab R45C tso cai rau kev nkag mus rau kev kuaj xyuas, kev saib xyuas, thiab kev pabcuam lossis hloov pauv. Tsis txhob nruab R45C hauv txoj hauv kev no kom tso cai rau kev yeej.
Tag nrho cov khoom siv mounting yog muab los ntawm tus neeg siv. Fasteners yuav tsum muaj lub zog txaus los tiv thaiv kev tawg. Kev siv cov fasteners mus tas li lossis cov khoom siv xauv xauv yog pom zoo kom tiv thaiv kom tsis txhob xoob lossis txav ntawm lub cuab yeej. Lub qhov mounting (4.5 hli) hauv R45C txais M4 (#8) kho vajtse. Saib daim duab hauv qab no los pab txiav txim qhov tsawg kawg nkaus ntsia hlau ntev.
CEEB TOOM: Tsis txhob overtighten R45C's mounting ntsia hlau thaum lub sij hawm installation.
Overtightening tuaj yeem cuam tshuam kev ua haujlwm ntawm R45C
Specifications
Muab Voltage
18V DC rau 30V DC ntawm 50 mA siab tshaj plaws
Hwj chim Pass-Through Current
4 Qhov siab tshaj plaws
Supply Protection Circuitry
Tiv thaiv rov qab polarity thiab kev hloov pauv voltages
Leakage Current Immunity
400 µA
Kev daws teeb meem
14 bits
Qhov tseeb
0.5%
Qhov taw qhia
Ntsuab: Lub zog
Amber: IO-Txuas kev sib txuas lus
Amber: Analog input nqi tam sim no
Amber: Analog tso zis nqi nyob rau hauv ntau yam
Kev sib txuas
Integral txiv neej / poj niam 4-pin M12 ceev disconnect
Kev tsim kho
Coupling Khoom: Nickel-plated tooj dag
Lub cev txuas: PVC translucent dub
Kev co thiab Mechanical Shock
Ua tau raws li IEC 60068-2-6 cov kev cai (Vibration: 10 Hz txog 55 Hz, 0.5 mm) amplitude, 5 feeb cheb, 30 feeb nyob)
Ua tau raws li IEC 60068-2-27 qhov yuav tsum tau ua (poob siab: 15G 11 ms ntev, ib nrab sine yoj)
Cov ntawv pov thawj
Environmental Rating
IP65, IP67, IP68
NEMA/UL Hom 1
Cov xwm txheej ua haujlwm
Kub: -40 ° C txog +70 ° C (-40 ° F txog +158 ° F) 90% ntawm +70 ° C siab tshaj qhov txheeb ze cov av (tsis ua kom txias)
Cia kub: -40 ° C rau + 80 ° C (-40 ° F txog + 176 ° F)
Yuav tsum muaj kev tiv thaiv overcurrent
CEEB TOOM: Kev sib txuas hluav taws xob yuav tsum tau ua los ntawm cov neeg ua haujlwm tsim nyog raws li cov cai hauv zos thiab lub teb chaws thiab cov cai.
Kev tiv thaiv overcurrent yuav tsum tau muab los ntawm qhov kawg ntawm daim ntawv thov khoom ib lub rooj muab.
Kev tiv thaiv overcurrent tuaj yeem muab nrog kev sib txuas sab nraud lossis los ntawm Kev Txwv Tam Sim No, Chav Kawm 2 Fais Fab.
Kev xaim hlau lead < 24 AWG yuav tsum tsis txhob muab sib dhos.
Rau kev txhawb nqa khoom ntxiv, mus rau www.bannerengineering.com.
| Supply Wiring (AWG) | Yuav tsum muaj kev tiv thaiv overcurrent (Amps) |
| 20 | 5.0 |
| 22 | 3.0 |
| 24 | 2.0 |
| 26 | 1.0 |
| 28 | 0.8 |
| 30 | 0.5 |
Banner Engineering Europe Park
Lane, Culliganlaan 2F tsheb npav 3, 1831 Diegem, BELGIUM
Turck Banner LTD Blenheim
Lub tsev, Blenheim Court, Wickford, Essex SS11 8YT, Great Britain
Banner Engineering Corp. lav nws cov khoom kom tsis muaj qhov tsis xws luag hauv cov khoom siv thiab kev ua haujlwm rau ib xyoos tom qab hnub xa khoom. Banner Engineering Corp. yuav kho lossis hloov, tsis pub dawb, txhua yam khoom ntawm nws cov khoom siv uas, thaum lub sijhawm nws raug xa rov qab mus rau lub Hoobkas, pom tias muaj kev puas tsuaj thaum lub sijhawm lav. Qhov kev lees paub no tsis suav nrog kev puas tsuaj lossis kev lav phib xaub rau kev siv tsis raug, kev tsim txom, lossis kev thov tsis raug lossis kev teeb tsa ntawm Banner cov khoom.
YUAV TSUM TAU TXAIS NYIAJ NYIAJ TAU TXAUS SIAB THIAB nyob rau hauv kev hloov pauv ntawm txhua qhov kev lav phib xaub txawm hais tias nthuav tawm lossis hais qhia (nrog rau, tsis txwv, txhua qhov kev lav phib xaub ntawm kev muag khoom lossis kev pabcuam rau ib qho chaw tshwj xeeb), KEV KAWM NTAWV, HOM NTAWM DEALING OR TRADE SAGE.
Qhov Warranty no tshwj xeeb thiab txwv rau kev kho lossis, ntawm kev txiav txim siab ntawm Banner Engineering Corp., hloov. YUAV TSUM TAU TXAIS IB DAIM NTAWV THOV KEV PAB CUAM TSHUAJ TIV THAIV LOS NTAWM LUB TSEV KAWM NTAWV LOS NTAWM LUB TSEV KAWM NTAWV NTAWM COV NYIAJ NYIAJ NYIAJ, NYIAJ NYIAJ, NYIAJ NYIAJ, NYIAJ NYIAJ NYIAJ, LOS YOG IB TUG NYIAJ NYIAJ, NYIAJ NYIAJ LOS NTAWM LUB SIJ HAWM YUAV TSUM siv cov khoom, txawm tias tshwm sim hauv daim ntawv cog lus lossis kev lav phib xaub, kev cai lij choj, kev tsim txom, kev lav phib xej, tsis saib xyuas, lossis lwm yam.
Banner Engineering Corp. muaj txoj cai los hloov, hloov kho lossis txhim kho tus qauv tsim ntawm cov khoom yam tsis tas yuav muaj kev lav phib xaub lossis kev lav phib xaub ntsig txog cov khoom lag luam yav dhau los tsim los ntawm Banner Engineering Corp. Kev siv tsis raug, kev tsim txom, lossis kev siv tsis raug lossis kev teeb tsa ntawm cov khoom no lossis siv. ntawm cov khoom lag luam rau daim ntawv thov kev tiv thaiv tus kheej thaum cov khoom raug txheeb xyuas tias tsis tau npaj rau cov laj thawj zoo li no yuav ua rau cov khoom lav tsis tau. Ib qho kev hloov kho rau cov khoom no yam tsis muaj kev pom zoo ua ntej los ntawm Banner Engineering Corp yuav ua rau cov khoom lav tsis tau. Txhua qhov tshwj xeeb tshaj tawm hauv daim ntawv no yuav raug hloov pauv; Banner muaj txoj cai los hloov kho cov khoom specifications lossis hloov kho cov ntaub ntawv txhua lub sijhawm. Cov lus qhia tshwj xeeb thiab cov khoom lag luam cov ntaub ntawv ua lus Askiv hloov dua siab tshiab uas tau muab ua lwm hom lus. Rau qhov tshiab tshaj plaws ntawm cov ntaub ntawv, xa mus rau: www.bannerengineering.com.
Rau cov ntaub ntawv patent, saib www.bannerengineering.com/patents.
FCC Part 15
Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai. Kev ua haujlwm yog ua raws li ob yam hauv qab no: 1) Cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam loj; thiab 2) Cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis xav tau.
Kev lag luam Canada
Cov cuab yeej no ua raws li CAN ICES-3 (B) / NMB-3(B). Kev ua haujlwm yog ua raws li ob yam hauv qab no: 1) Cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam loj; thiab 2) Cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis xav tau.
Cet appareil yog conforme à la norme NMB-3(B). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du disposité.
Cov ntaub ntawv / Cov ntaub ntawv
 |
BANNER R45C Analog Input-Output rau IO-Txuas Device Converter [ua pdf] Cov neeg siv phau ntawv qhia R45C, Analog Input-Output rau IO-Link Device Converter, R45C Analog Input-Output rau IO-Link Device Converter, Cov tswv yim-tso zis rau IO-Txuas Ntaus Converter, IO-Txuas Ntaus Converter, Ntaus Converter, Converter |
