PLIANT 2400XR MicroCom Akwụkwọ ntuziaka onye ọrụ ikuku Intercom ọwa abụọ

Okwu mmalite

Anyị na Pliant Teknụzụ chọrọ ikele gị maka ịzụrụ MicroCom 2400XR. MicroCom 2400XR siri ike, ọwa abụọ, duplex zuru oke, ọtụtụ onye ọrụ, sistemụ intercom ikuku na-arụ ọrụ na bandwit ugboro 2.4GHz iji nye oke na arụmọrụ dị elu, niile na-enweghị mkpa ntọala. Sistemu ahụ nwere akpa belt dị arọ ma na-enye ogo ụda pụrụiche, nkagbu mkpọtụ emelitere, yana ọrụ batrị ogologo ndụ. Na mgbakwunye, a na-ewu eriri belt IP67 nke MicroCom ka ọ na-atachi obi n'ike na akwa nke ojiji a na-eme kwa ụbọchị, yana oke oke na gburugburu n'èzí.

Iji nweta ihe kacha mma na MicroCom 2400XR ọhụrụ gị, biko were obere oge gụọ akwụkwọ ntuziaka a kpamkpam ka ị ghọtakwuo ọrụ ngwaahịa a. Akwụkwọ a na-emetụta ụdị PMC-2400XR. Maka ajụjụ ndị a na-azaghị n'akwụkwọ ntuziaka a, nweere onwe gị ịkpọtụrụ Ngalaba Nkwado Ndị Ahịa Pliant Technologies site na iji ozi dị na ibe 10.

NDỤMỌDỤ ngwaahịa

• siri ike, Sistemụ ọwa abụọ
• Mfe Na-arụ Ọrụ
• Ruo ndị ọrụ Duplex 10 zuru oke
• Nkwukọrịta ngwugwu-na-mkpọ
• Naanị ndị ọrụ na-ege ntị na-akparaghị ókè
• 2.4GHz Frequency Band
• Teknụzụ hopping ugboro ugboro
• Kọmpat Ultra, Obere, na Fefe
• Igwe anaghị agba nchara, IP67 BeltPack kwadoro
• Ogologo ndụ batrị nke awa 12
• Batrị enwere ike dochie ubi
• Chaja ndobe dị

Kedu ihe agụnyere na MICROCOM 2400XR?

• BeltPack
• Batrị Li-Ion (Awụnyere n'oge mbupu)
• Igwe nchaji USB
• BeltPack Antenna (Tinye na beltpack tupu arụ ọrụ.)
• Ntuziaka mmalite ngwa ngwa

NZIRI EGO

• PAC-USB5-CHG: MicroCom 5-Port USB chaja
• PAC-MCXR-5CASE: MicroCom Hard Carry Case enwetara IP67
• PAC-MC-SFTCASE: MicroCom Soft Travel Case
• PBT-XRC-55: MicroCom XR 5+5 dobe BeltPack na chaja batrị
• PHS-SB11LE-DMG: SmartBoom® LITE Single Ear Pliant ekweisi nwere njikọ Obere Mini maka MicroCom
• PHS-SB110E-DMG: SmartBoom PRO Single Ear Pliant isi isi na Dual Mini njikọ maka MicroCom
• PHS-SB210E-DMG: SmartBoom PRO Dual Ear Pliant isi isi nwere njikọ Obere Mini maka MicroCom
• PHS-IEL-M: Igweisi In-Ear MicroCom, Otu ntị, naanị aka ekpe
• PHS-IELPTT-M: Igweisi In-Ear MicroCom nwere bọtịnụ Push-to-Talk (PTT), otu ntị, naanị aka ekpe.
• PHS-LAV-DM: MicroCom Lavalier Igwe okwu na Eartube
• PHS-LAVPTT-DM: MicroCom Lavalier Igwe okwu na Eartube nwere bọtịnụ PTT
• ANT-EXTMAG-01: MicroCom XR 1dB Igwe Ọdụdọ Mpụga 900MHz/2.4GHz Antenna
• PAC-INT-IO: Wired Intercom na ụzọ abụọ redio Interface nkwụnye

Njikwa

Ngosipụta ihe ngosi

MELITE

1. Tinye eriri eriri belt ahụ. Ọ bụ azụ eri; ịghasa counter-clockwise.
2. Connect a headset to the beltpack. Press firmly to make sure the headset connector is seated properly.
3. Power on. Press and hold the POWER button for two (2) seconds until the screen turns on.
4. Access the menu. Press and hold the MODE button for three (3) seconds until the screen changes to . Short-press MODE to scroll through the settings, and then scroll through setting options using VOLUME +/−. Press and hold MODE to save your selections and exit the menu.

• Họrọ otu. Select a group number from 00–51.
  Ihe dị mkpa: BeltPacks ga-enwerịrị otu nọmba otu iji kparịta ụka.

Ọ BỤRỤ na ị na-arụ ọrụ beltpack n'ụdị ikwugharị *

1. Họrọ ID. Họrọ nọmba NJ pụrụ iche.
   • Nhọrọ NJ ọnọdụ ugboro ugboro: M (Master), 01–08 (Full Duplex), S (Ekekọrịtara), L (Ntị).
   • Otu eriri eriri ga-eji “M” ID mgbe niile wee jee ozi dị ka Nna-ukwu maka ọrụ sistemụ kwesịrị ekwesị. Ihe ngosi “M” na-egosipụta eriri belt Master na ihuenyo ya.
   • Akpa eriri naanị-ege ga-ejirịrị “L” ID. Ị nwere ike ịmegharị ID "L" n'ọtụtụ eriri belt.
   • Akpa belt ekekọrịtara ga-ejiri “S” ID. Ị nwere ike ịmegharị ID "S" n'ọtụtụ beltpacks, mana naanị otu eriri belt nwere ike ikwu okwu n'otu oge.
   • Mgbe ị na-eji NJ “S”, enweghị ike iji NJ zuru ezu-duplex (“08”) ikpeazụ n'ụdị Repeater.
2. Kwenye koodu nchekwa beltpack. BeltPacks ga-eji otu koodu nchekwa arụkọ ọrụ dịka sistemụ.
   * Ọnọdụ ugboro ugboro bụ ntọala ndabara. Lee ibe 8 maka ozi gbasara mgbanwe ọnọdụ.

Ọ BỤRỤ na ị na-arụ ọrụ beltpack n'ụdị agagharị

1. Họrọ ID. Họrọ nọmba NJ pụrụ iche.
   • Nhọrọ NJ Mode Roam: M (Master), SM (Submaster), 02-09, S (Ekekọrịtara), L (Ntị).
   • Otu beltpack ga-abụrịrị “M” ID mgbe niile wee jee ozi dị ka Nna-ukwu, otu eriri belt ga-edoberịrị “SM” ma jee ozi dị ka Submaster maka ọrụ sistemụ kwesịrị ekwesị.
   • Nna-ukwu na Submaster ga-anọrịrị n'ọnọdụ ebe ha na-enwe ahịrị anya na-enweghị mgbochi na ibe ha mgbe niile.
   • Akpa eriri naanị-ege ga-ejirịrị “L” ID. Ị nwere ike ịmegharị ID "L" n'ọtụtụ eriri belt.
   • Akpa belt ekekọrịtara ga-ejiri “S” ID. Ị nwere ike ịmegharị ID "S" n'ọtụtụ beltpacks, mana naanị otu eriri belt nwere ike ikwu okwu n'otu oge.
   • Mgbe ị na-eji NJ “S”, enweghị ike iji ID zuru-duplex ikpeazụ (“09”) na ọnọdụ ngagharị.
2. Nweta menu roaming. Họrọ otu n'ime nhọrọ menu roaming depụtara n'okpuru maka akpa belt ọ bụla.
   • Nchekwa onwe - Na-enye ohere eriri eriri ịbanye na Master ma ọ bụ Submaster na-akpaghị aka dabere na gburugburu ebe obibi yana mkpọmkpọ belt dị nso na nke ọ bụla.
   • Akwụkwọ ntuziaka - Na-enye onye ọrụ ohere iji aka ya họrọ ma eriri belt abanyela na Master ma ọ bụ Submaster. Pịa bọtịnụ MODE ka ịhọrọ Master ma ọ bụ Submaster.
   • Nna-ukwu - Mgbe ahọpụtara, a na-akpọchi eriri belt ka ọ bụrụ naanị ịbanye na Nna-ukwu.
   • Submaster – Mgbe ahọpụtara, a na-akpọchi beltpack naanị ịbanye na Submaster.
3. Kwenye koodu nchekwa beltpack. BeltPacks ga-eji otu koodu nchekwa arụkọ ọrụ dịka sistemụ.

Ọ BỤRỤ na ị na-arụ ọrụ beltpack na ọkọlọtọ ọkọlọtọ

1. Họrọ ID. Họrọ nọmba NJ pụrụ iche.
   • Nhọrọ NJ ọkọlọtọ ọkọlọtọ: M (Master), 01–09 (Full Duplex), S (Ekekọrịtara), L (Ntị).
   • Otu eriri eriri ga-eji “M” ID mgbe niile wee jee ozi dị ka Nna-ukwu maka ọrụ sistemụ kwesịrị ekwesị. Ihe ngosi “M” na-egosipụta eriri belt Master na ihuenyo ya.
   • Akpa eriri naanị-ege ga-ejirịrị “L” ID. Ị nwere ike ịmegharị ID "L" n'ọtụtụ eriri belt.
   • Akpa belt ekekọrịtara ga-ejiri “S” ID. Ị nwere ike ịmegharị ID "S" n'ọtụtụ beltpacks, mana naanị otu eriri belt nwere ike ikwu okwu n'otu oge.
   • Mgbe ị na-eji NJ “S”, enweghị ike iji ID zuru-duplex ikpeazụ (“09”) n'ụdị ọkọlọtọ.
2. Kwenye koodu nchekwa beltpack. BeltPacks ga-eji otu koodu nchekwa arụkọ ọrụ dịka sistemụ.

Batrị

A na-etinye batrị lithium-ion nke enwere ike ịchaji n'ime ngwaọrụ na mbupu. Iji fanye batrị, ma 1) tinye eriri USB n'ime ọdụ ụgbọ USB ngwaọrụ ma ọ bụ 2) jikọọ ngwaọrụ na chaja dobe (PBT-XRC-55, rere iche). Igwe ọkụ LED dị n'akụkụ aka nri elu nke ngwaọrụ ahụ ga-enye ìhè siri ike na-acha uhie uhie mgbe batrị na-agbanyụ ma gbanyụọ ozugbo batrị chajịrị. Oge chajị batrị dị ihe dịka awa 3.5 site na ihe efu (njikọ ọdụ ụgbọ mmiri USB) ma ọ bụ ihe dịka awa 6.5 site na chaja efu (n'ịkọba). Enwere ike iji eriri belt mee ihe mgbe ị na-ebugharị, mana ime nke a nwere ike ịgbatị oge chajị batrị.

Ọrụ

• Ụdị LED - LED bụ acha anụnụ anụnụ na blinks abụọ mgbe ị banyere na otu blinks mgbe esitere. LED na-acha uhie uhie mgbe ịchaji batrị na-aga n'ihu. Ikanam na-agbanyụ mgbe chaja zuru.
• Mkpọchi – To toggle between Lock and Unlock, press and hold the TALK and MODE buttons simultaneously for three (3) seconds. A lock ico appears on the screen when locked. This function locks the TALK and MODE buttons, but it does not lock headset volume control, the POWER button, or the PTT button.
• Olu elu na ala – Use the + and − buttons to control the headset volume. “Volume” and a stair-step indicator will display th beltpack’s current volume setting on the screen. You will hear a beep in your connected headset when the volume is changed. You will hear a different, higher-pitched beep when maximum volume is reached.
• Kwuo okwu – Use the TALK button to enable or disable talk for the device. “TALK” appears on the screen when enabled
  • Agbanyere/gbanyụọ okwu latch site na iji otu bọtịnụ dị mkpụmkpụ.
  • A na-akwado ikwu okwu nwa oge site na ịpị ma jide bọtịnụ maka sekọnd abụọ (2) ma ọ bụ karịa; okwu ga-anọgide ruo mgbe ahapụpụtara bọtịnụ.
  • Ndị ọrụ ekekọrịtara (NJ “S”) nwere ike mee ka okwu maka ngwaọrụ ha jiri ọrụ ikwu okwu nwa oge (pịa ma jide mgbe ị na-ekwu okwu). Naanị otu onye ọrụ ekekọrịtara nwere ike ikwu okwu n'otu oge.
• Ụdị - Mkpirisi pịa bọtịnụ MODE ka ịgbanwee n'etiti ọwa enyere na eriri belt. Pịa ogologo bọtịnụ MODE ka ịnweta menu.
• Two-Way Push-to-Talk – If you have a two-way radio connected to the Master beltpack, you may use the PTT button to activate talk for the two-way radio from any beltpack on the system.
• Adịghị oke ụda - Onye ọrụ ga-anụ ụda ngwa ngwa atọ mgbe beltpack si na sistemụ ahụ pụta, ha ga-anụkwa ụda abụọ ngwa ngwa mgbe ọ banyere.

Sistemụ igwe microcom na-arụ ọrụ n'otu ebe

Usoro MicroCom dị iche iche kwesịrị iji otu Group na koodu nchekwa maka eriri belt niile dị na sistemụ ahụ. Pliant na-atụ aro ka sistemu ndị na-arụ ọrụ nso n'ebe ibe ha nọ debe otu ha ka ọ dịkarịa ala ụkpụrụ iri (10). Maka exampỌ bụrụ na otu sistemụ na-eji Group 03, sistemụ ọzọ dị nso kwesịrị iji Group 13.

Ntọala menu

Tebụl na-esonụ na-edepụta ntọala na nhọrọ nwere ike ịhazigharị. Ka ịgbanwee ntọala ndị a site na nchịkọta beltpack, soro ntuziaka dị n'okpuru:

1. Iji nweta menu, pịa ma jide bọtịnụ MODE maka sekọnd atọ (3) ruo mgbe ihuenyo gbanwere .
2. Pịa bọtịnụ MODE dị mkpirikpi ka ịpịgharịa na ntọala: Otu, ID, ụda akụkụ, Mic Gain, Channel A, Channel B, Koodu Nchekwa na Roaming (naanị na ọnọdụ ngagharị).
3. Mgbe viewN'ime ntọala ọ bụla, ịnwere ike ịpịgharịa na nhọrọ ya site na iji bọtịnụ VOLUME +/-; wee gaa n'ihu na ntọala menu na-esote site na ịpị bọtịnụ MODE. Lee tebụl dị n'okpuru maka nhọrọ dị n'okpuru ntọala ọ bụla.
4. Ozugbo ịmechara mgbanwe gị, pịa ma jide MODE ka ịchekwaa nhọrọ gị wee pụọ na menu.

Ịtọ ntọala	Ọdabara	Nhọrọ	Nkọwa
Otu	N/A	00–51	Na-ahazi ọrụ maka eriri belt na-ekwurịta okwu dị ka usoro. BeltPacks ga-enwerịrị otu nọmba otu iji kparịta ụka.
ID	N/A	M SM 01–08 02–09 01–09 SL	Master ID Submaster ID (only in Roam Mode) Repeater* Mode ID options Roam Mode ID options Standard Mode ID options Shared Listen-Only
Ụda Akụ	2	1–5, Off	Na-enye gị ohere ịnụ onwe gị mgbe ị na-ekwu okwu. Gburugburu ndị dara ụda nwere ike ịchọ ka ịmee ụda akụkụ gị.
Mic Gain	1	1–8	Na-ekpebi ọkwa ụda igwe okwu ekweisi nke a na-eziga site na tupu igwe okwu amp.
Ọwa A	On	Gbanyụọ, Gbanyụọ
Channel B**	On	Gbanyụọ, Gbanyụọ
Koodu nchekwa (“koodu SEC”)	0000	Koodu mkpụrụedemede 4-ọdịjit	Na-amachi ịnweta sistemụ. BeltPacks ga-eji otu koodu nchekwa arụkọ ọrụ dịka sistemụ.
Ịgbagharị ***	Akpaaka	Auto, Akwụkwọ ntuziaka, Submaster, Master	Determines whether a beltpack can switch between the Master and Submaster beltpacks. (only available in Roam Mode)

• Ọnọdụ ugboro ugboro bụ ntọala ndabara. Lee ibe 8 maka ozi gbasara mgbanwe ọnọdụ.
• Channel B not available in Roam Mode.
• Roaming menu options only available in Roam Mode.

Ntọala akwadoro site na isi okwu

Tebụlụ na-esote na-enye ntọala MicroCom akwadoro maka ọtụtụ ụdị ekweisi nkịtị.

Ụdị ekweisi	Ntọala akwadoro
	Mic Gain
SmartBoom PRO na SmartBoom LITE (PHS-SB11LE-DMG, PHS-SB110E-DMG, PHS-SB210E-DMG)	1
Igwe isi n'ime ntị MicroCom (PHS-IEL-M, PHS-IELPTT-M)	7
Igwe okwu lavalier MicroCom na eartube (PHS-LAV-DM, PHS-LAVPTT-DM)	5

NHỌRỤ TECH – Mgbanwe Ịtọlite ​​Ụdị

Enwere ike ịgbanwe ọnọdụ ahụ n'etiti ntọala atọ maka ịrụ ọrụ dị iche iche:

• Ụkpụrụ ọkọlọtọ na-ejikọ ndị ọrụ ebe ahịrị anya n'etiti ndị ọrụ ga-ekwe omume.
• Ụdị ihe nkwugharị * na-ejikọ ndị ọrụ na-arụ ọrụ karịrị ahịrị anya site n'ịchọta beltpack Master na ebe etiti ama ama.
• Ụdị ngagharị na-ejikọ ndị ọrụ na-arụ ọrụ gafere ahịrị anya wee gbatịa nso nke sistemụ MicroCom site n'ịchọta eriri belt Master na Submaster.
  *Repeater Mode is the default setting

Soro ntuziaka dị n'okpuru ka ịgbanwee ọnọdụ na akpa belt gị.

1. Iji nweta menu teknụzụ, pịa ma jide bọtịnụ PTT na MODE n'otu oge ruo mgbe ngosi.
2. Pịgharịa n'etiti nhọrọ "ST," "RP," na "RM" site na iji bọtịnụ VOLUME +/-.
3. Pịa ma jide MODE ka ịchekwaa nhọrọ gị wee pụọ na menu teknụzụ. Akpa belt ga-agbanyụ ozugbo.
4. Pịa ma jide bọtịnụ IKE maka sekọnd abụọ (2); beltpack ga-agbanyeghachi ma na-eji ọnọdụ ahọpụtara ọhụrụ.

Nkọwa ngwaọrụ

Nkọwapụta*	PMC-2400XR
Ụdị ugboro redio	ISM 2400–2483 MHz
Okwu Interface	GFSK nwere FHSS
Ike Isotropically Radiated (EIRP) kacha dị irè	100mW
Nzaghachi ugboro ugboro	50 Hz ~ 4 kHz
Izo ya ezo	AES 128
Ọnụọgụ Ọwa Okwu	2
Antenna	Ụdị Antenna Helical nwere ike ịpụpụ
Typedị .gwọ	USB Micro; 5V; 1–2 A
Ndị ọrụ Duplex zuru oke	10
Ọnụọgụ nke ndị ọrụ ekekọrịtara	Enweghị oke
Ọnụọgụ nke naanị ndị ọrụ gee ntị	Enweghị oke
Ụdị batrị	Enwere ike ibugharị 3.7V; 2,000mA Li-ion batrị nwere ike dochie anya ubi
Ndụ batrị	Ihe ruru. awa 12
Oge Nchaji batrị	3.5 awa (USB cable) Oge awa 6.5 ( chaja na-ebubata)
Akụkụ	4.83 n'ime. (H) × 2.64 n'ime. (W) × 1.22 inch (D, nwere clip belt) [122.7 mm (H) x 67 mm (W) x 31 mm (D, nwere mkpịsị eriri)]
Ibu	6.35 oz. (180 g)
Ngosipụta	OLED

* Notice about Specifications: While Pliant Technologies makes every attempt to maintain the accuracy of the information contained in its product manuals, that information is subject to change without notice. Performance specifications included in this manual are design-centered specifications and are included for customer guidance and to facilitate system installation. Actual operating performance may vary. Manufacturer reserves the right to change specifications to reflect latest changes in technology and improvements at any time without notice.

IHE: Ihe nlereanya a kwekọrọ n'ụkpụrụ ETSI (300.328 v1.8.1)

Nlekọta ngwaahịa na nlekọta

Jiri nwayọ dị ọcha, damp akwa .

kpachara anya: Ejila ihe nhicha nwere ihe mgbaze. Debe mmiri mmiri na ihe ndị si mba ọzọ na oghere ngwaọrụ. Ọ bụrụ na ngwaahịa ahụ kpuchiri mmiri ozuzo, jiri nwayọ hichapụ elu niile, eriri na njikọ eriri ozugbo enwere ike wee hapụ otu nkeji ka akpọọ nkụ tupu ịchekwaa.

Nkwado ngwaahịa

Pliant Technologies offers technical support via phone and email from 07:00 to 19:00 Central Time (UTC−06:00), Monday through Friday

1.844.475.4268 ma ọ bụ +1.334.321.1160
oru.support@plianttechnologies.com

Gaa leta www.plianttechnologies.com maka nkwado ngwaahịa, akwụkwọ, na nkata ndụ maka enyemaka. (Nkparịta ụka dị ndụ dị 08:00 ruo 17:00 Central Time (UTC-06:00), Mọnde ruo Fraịde.)

Ngwa eji eweghachi maka ndozi ma ọ bụ ndozi

Ajuju niile na/ma ọ bụ arịrịọ maka Nọmba ikike nlọghachi kwesịrị ka eduzi ya na Ngalaba Ọrụ Ndị Ahịa (customer.service@plianttechnologies.com). Do not return any equipment directly to the factory without first obtaining a Return Material Authorization (RMA)
Nọmba. Inweta ọnụọgụ ikike ihe onwunwe nloghachi ga-ahụ na ejiri ngwa ngwa gị edozi ya ozugbo.

Ekwesịrị ka ebupu ngwaahịa Pliant niile site na UPS, ma ọ bụ mbupu kacha mma dị, akwụgoro na mkpuchi mkpuchi. Ekwesịrị ibupu akụrụngwa na katọn nkwakọ ngwaahịa mbụ; ọ bụrụ na nke ahụ adịghị, jiri akpa ọ bụla dabara adaba nke siri ike yana nha zuru oke iji jiri opekata mpe sentimita anọ nke ihe na-akpata ujo gbachie ngwa ahụ. Ekwesịrị izipu mbupu niile n'adreesị ndị a ma ga-etinyerịrị Nọmba ikike Nlaghachi:

Ngalaba Ọrụ Ndị Ahịa Pliant Teknụzụ
Attn: Weghachite ikike ihe onwunwe #
205 Technology Parkway
Auburn, AL USA 36830-0500

Ozi Ikikere

PLIANT TECHNOLOGIES MICROCOM FCC Nkwukọrịta Nkwekọrịta

00004394 (FCCID: YJH-GM-900MSS)
00004445 (FCCID: YJH-GM-24G)

A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị B, dabere na akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta, na-eji ma nwee ike ịgbasa ike ugboro redio na, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu n'ime usoro ndị a:

• Megharịa ma ọ bụ bugharịa antenna nnata.
• Mee ka nkewa dị n'etiti akụrụngwa na nnata.
• Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata.
• Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.

kpachara anya

Mgbanwe nke ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa ahụ.

Ozi nnabata FCC: Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. Ọrụ dị n'okpuru ọnọdụ abụọ ndị a: (1) Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana (2) ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike bute ọrụ na-achọghị.

IHE DỊ MKPA

Nkwupụta Ngosipụta Radiation FCC RF: Ngwa a na-akwado oke mkpughe radieshon FCC RF ewepụtara maka gburugburu anaghị achịkwa.

A ghaghị ịwụnye antennas eji maka nnyefe a iji nye anya nkewa nke opekata mpe 5 mm n'ebe mmadụ niile nọ na agaghị enwekwa ya ma ọ bụ na-arụ ọrụ na njikọ antenna ma ọ bụ nnyefe ọ bụla.

Nkwuputa nrube isi nke Canada

Ngwaọrụ a nwere ihe mbufe / nnata (s) enweghị ikike nke na-agbaso Innovation, Science and Economic Development RSS(s) enweghị ikike nke Canada. Kpọmkwem RSS 247 Issue 2 (2017-02).

A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:

1. Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya.
2. Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla, gụnyere nnyonye anya nwere ike bute ịrụ ọrụ ngwaọrụ a na-achọghị.

Nkwupụta KWESỊRỊ PLIANT

Ngwaahịa CrewCom® na MicroCom™ nwere ikike ka ha nweere onwe ya pụọ ​​​​na ntụpọ n'ihe yana arụ ọrụ maka afọ abụọ site na ụbọchị ire ere ruo onye ọrụ njedebe, n'okpuru ọnọdụ ndị a:

• Afọ mbụ nke akwụkwọ ikike gụnyere na ịzụrụ.
• Afọ nke abụọ nke akwụkwọ ikike chọrọ ndebanye aha ngwaahịa na Pliant websaịtị.

Ngwaahịa ọkachamara Tempest® na-ebu akwụkwọ ikike ngwaahịa afọ abụọ.
Igwe isi na ngwa niile (gụnyere batrị Pliant nwere akara) na-ebu akwụkwọ ikike otu afọ.
The sole obligation of Pliant Technologies, LLC during the warranty period is to provide, without charge, parts and labor necessary to remedy covered defects appearing in products returned prepaid to Pliant Technologies, LLC. This warranty does not cover any defect, malfunction, or failure
caused by circumstances beyond the control of Pliant Technologies, LLC, including but not limited to negligent operation, abuse, accident, failure to follow instructions in the Operating Manual, defective or improper associated equipment, attempts at modification and/or repair not authorized by Pliant Technologies, LLC, and shipping damage. Products with their serial numbers removed or effaced are not covered by this warranty.

Akwụkwọ ikike a nwere oke bụ naanị akwụkwọ ikike awara awara enyere na ngwaahịa Pliant Teknụzụ LLC. Ọ bụ ọrụ dịịrị onye ọrụ ikpebi tupu ịzụta na ngwaahịa a dabara maka ebumnuche onye ọrụ.
Ọ BỤLA nile echiche warranties, gụnyere echiche akwụkwọ ikike MERCHANTABILITY, na-ejedebeghị oge nke A Express Limited akwụkwọ ikike. Ọ BỤGHỊ TECHNOLOGIES PLIANT, LLC ma ọ bụ onye na-ere ahịa ikike ikike nke na-ere ngwaahịa PLIANT Ọkachamara INTERCOM ga-akwụ ụgwọ maka mmebi mberede ma ọ bụ ihe ga-esi na ya pụta n'ụdị ọ bụla.

NKE AKA NKE AKA AKA

Akụkụ ngbanwe maka Pliant Teknụzụ, ngwaahịa LLC ka enyere ikike inwere onwe ya pụọ ​​na ntụpọ n'ihe yana arụ ọrụ maka ụbọchị 120 site na ụbọchị erere onye ọrụ njedebe.

This warranty does not cover any defect, malfunction, or failure caused by circumstances beyond the control of Pliant Technologies, LLC, including but not limited to negligent operation, abuse, accident, failure to follow instructions in the Operating Manual, defective or improper associated equipment, attempts at modification and/or repair not authorized by Pliant Technologies, LLC, and
mmebi mbupu. Mmebi ọ bụla emere akụkụ nọchiri anya n'oge ntinye ya na-efunahụ ikike nke akụkụ ahụ nọchiri anya ya.

Akwụkwọ ikike a nwere oke bụ naanị akwụkwọ ikike awara awara enyere na ngwaahịa Pliant Teknụzụ LLC. Ọ bụ ọrụ dịịrị onye ọrụ ikpebi tupu ịzụta na ngwaahịa a dabara maka ebumnuche onye ọrụ.
Ọ BỤLA nile echiche warranties, gụnyere echiche akwụkwọ ikike MERCHANTABILITY, na-ejedebeghị oge nke A Express Limited akwụkwọ ikike. Ọ BỤGHỊ TECHNOLOGIES PLIANT, LLC ma ọ bụ onye na-ere ahịa ikike ikike nke na-ere ngwaahịa PLIANT Ọkachamara INTERCOM ga-akwụ ụgwọ maka mmebi mberede ma ọ bụ ihe ga-esi na ya pụta n'ụdị ọ bụla.

 

Akwụkwọ / akụrụngwa

PLIANT 2400XR MicroCom Sistemụ Intercom Ikuku Ọwa abụọ [pdf] Akwụkwọ ntuziaka onye ọrụ 2400XR, MicroCom Two Channel Wireless Intercom System

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ