Phau Ntawv Qhia Pib Ceev

960 TSHUAJ TUA TSWJ
Legendary Analog Kauj Ruam Sequencer Module rau Eurorack
V 1.0

LEGAL DISCLAIMER

Suab paj nruag pawg neeg lees txais tsis muaj kev lav phib xaub rau ib qho kev poob uas yuav raug kev txom nyem los ntawm ib tus neeg uas tso siab rau tag nrho lossis ib feem ntawm cov lus piav qhia, duab, lossis nqe lus muaj nyob hauv no. Cov kev qhia tshwj xeeb, qhov tshwm sim, thiab lwm yam ntaub ntawv yuav raug hloov yam tsis tau ceeb toom. Tag nrho cov cim lag luam yog cov cuab yeej ntawm lawv cov tswv. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones, thiab Coolaudio yog cov cim lag luam lossis cov cim lag luam ntawm Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED Warranty

Rau cov nqe lus thiab tej yam kev mob uas siv tau thiab cov ntaub ntawv ntxiv txog Music Tribe's Limited Warranty, thov saib cov ntsiab lus tiav hauv online ntawm musictribe.com/suab.

960 SEQUENTIAL CONTROLLER Tswj

1. OSCILLATOR – Xaiv qhov dav oscillator ntau yam nrog qhov zaus ntau qhov pob qhov rooj, thiab kho kom zoo nrog Zaus Vernier pob qhov rooj. Koom lossis tshem tawm cov oscillator manually nrog OSC ON thiab OFF cov nyees khawm, lossis txuas lub rooj vag sab nraud los tswj cov xwm txheej ntawm / tawm.
2. TSWJ UA LUAJ - Txais voltage los ntawm lwm tus qauv los tswj cov oscillator zaus.
3. COV OSCILLATOR LAWM - Xa cov teeb liab oscillator ntawm 3.5 mm TS cable.
4. IN - Qhib ib qho stage ntawm ib sab nraud voltage trigger (V-trig). Nco ntsoov tias litage IN tsis tuaj yeem patched rau lwm tus stage OUT.
5. Tawm – Xa lub voltage txhais (V-trig) teeb liab rau lwm tus qauv.
6. SET - Manually qhib raws litage. Nyob rau hauv cov kev tshwm sim ntawm ib tug sequencing yuam kev, nias tej SET khawm kom rov pib dua litage thiab rov ua haujlwm li qub.
7. STAGE MODE - Nyob rau hauv qhov chaw qub, lub stage khiav nws lub voj voog thiab mus rau lwm qhov stage. Xaiv qhov Skip chaw yuav bypass stage, thiab xaiv Nres yuav nres qhov ua ntu zus. Ib 9th stage tshwm sim los txuas ntxiv qhov ntu ntu (Skip) lossis Nres qhov ntu ntawm stage9 ua stage 9 tso zis active. Thaum twg stage 9 dhau los ua haujlwm, tus oscillator tau txiav tawm.
8. VOLTAGE tswj - Kho lub voltage rau stage. Qhov txuas LED yuav teeb los qhia qhov tam sim no-ua haujlwm stage.
9. QHOV TSEEB – Xa lub voltage ua 8stages mus rau lwm cov modules. Cov zis tuaj yeem ntsuas nrog cov pob qhov sib txuas los ntawm qhov zoo ntawm 1, 2, lossis 4.
10. 3 RD ROW TIMING - Txij li ntau tus neeg siv yuav khiav 960 raws li 8-stage16s ibtage sequencer (ntawm 962 modules), kab thib 3 tuaj yeem siv los tswj lub sijhawm ntawm txhua stage. Txav mus rau qhov chaw ON thiab kho txhua stage's 3rd knob kom lengthen los yog luv lub sij hawm.
11. SHIFT - Tswj kev sib hloov ntawm ib qho chaw sab nraud lossis siv nrog khawm.

24-Stage Kev ua si

Lub hom phiaj tseem ceeb ntawm 962 qhov hloov pauv hloov pauv yog hloov pauv ntawm 3 qhov tso zis kab ntawm 960 los tsim 24-stage ntu. Patch lub trigger OUT jack los ntawm stage 1 rau hauv SHIFT input ntawm 962. Patch 3 cov zis kab A, B, thiab C los ntawm 960 mus rau 962's 3 SIG inputs. Tam sim no 962 cov zis yuav yog 24-stage sequencer tso zis los yog tawm ntawm C kab thaj ua rau thaj rau 16 kauj ruam.

Txoj Kev Tuning

1. Fais fab mus rau 960 modules thiab nias lub pob OSC ON. Cia chav tsev sov li ob peb feeb.
2. Npaj rau cov chaw tswj hauv qab no:
   ib. Teem lub 3rd ROW CONTROL ntawm TIMING hloov mus rau tawm.
   b. Teem lub FREQUENCY rotary hloov mus rau 6 ntawm qhov ntsuas.
   c. Xyuas kom tseeb tias tsis muaj jack txuas nrog oscillator CONTROL INPUT.
3. Teem lub FREQUENCY VERNIER rau raws nraim 100 Hz ntawm OSCILLATOR OUTPUT ntsuas nrog lub ntsuas qhov tseeb thiab kho DUTY CYCLE ADJ rau 90% lub luag haujlwm voj voog.
4. Fine-tune lub 960 oscillator lub siab-frequency scaling raws li nram no:
   ib. Thov raws nraim +2.0 VDC rau CONTROL INPUT jack (A 921A module tuaj yeem siv los muab cov +2.0 VDC lossis siv qhov zoo sib xws uas tsis muaj impedance ruaj khov-vol.tage qhov chaw).
   b. Trim lub 960 SCALE ADJ trimmer los teeb tsa 400 Hz, tom qab ntawd tshem tawm +2.00 V cov tswv yim thiab hloov kho 960 FREQ VERNIER rau 100 Hz.
   c. Rov ua lub voj voog no kom txog rau thaum ob qho tib si 100 Hz thiab 400 Hz yog qhov tseeb rau ± 1 Hz thaum lub +2.00 VDC ntsaws rau hauv thiab tawm ntawm CONTROL INPUT jack.
5. Fine-tune 960 oscillator qhov tsawg zaus teev cov haujlwm raws li hauv qab no:
   ib. Thov raws nraim -2.0 VDC rau CONTROL INPUT jack (A 921A module tuaj yeem siv los muab
   lub -2.00 VDC los yog siv qhov zoo sib xws low-impedance ruaj khov-voltage qhov chaw).
   b. Trim lub 960 LOW-END ADJ trimmer los teeb 25 Hz, tom qab ntawd tshem tawm -2.00 V cov tswv yim thiab hloov kho 960 FREQ VERNIER rau 100 Hz.
   c. Rov ua lub voj voog no kom txog rau thaum ob qho tib si 100 Hz thiab 25 Hz yog qhov tseeb rau ± 1 Hz thaum lub -2.00 VDC ntsaws rau hauv thiab tawm ntawm CONTROL INPUT jack.
6. Teem lub 960 oscillator qhov ntau qhov ntau zaus raws li hauv qab no:
   ib. Xyuas kom tseeb tias tsis muaj jack txuas nrog CONTROL INPUT.
   b. Teem lub FREQUENCY VERNIER tag nrho clockwise (10 ntawm lub teev).
   c. Kho qhov FREQUENCY ADJUST trimmer kom teem caij raws nraim 500 Hz ntawm OSCILLATOR OUTPUT.
   d. Thov raws nraim +2.0 VDC rau CONTROL INPUT jack (qhov no yuav nres lub oscillator khiav).
   e. Kho qhov FREQ STOP ADJ trimmer kom txog thaum lub oscillator pib khiav thiab teeb tsa qhov siab tshaj plaws mus txog 550 Hz.
   f. Tshem tawm lub + 2.0 VDC CONTROL INPUT thiab xyuas cov oscillator zaus yog 500 Hz.
   Kho qhov FREQUENCY ADJUST trimmer yog tias xav tau.
   g. Thov raws nraim +2.0 VDC rau CONTROL INPUT jack, yog tias lub oscillator nyob twj ywm khiav, lub trimming tiav. Yog tias tsis yog, rov ua dua raws li xav tau.

Kev sib txuas fais fab

Lub module tuaj nrog cov yuav tsum tau xaim hluav taws xob txuas rau kev sib txuas rau cov qauv Eurorack zog mov. Ua raws li cov kauj ruam no mus txuas rau lub hwj chim rau hauv module. Nws yooj yim dua los ua cov kev sib txuas ua ntej cov qauv tau muab nruab rau hauv cov rooj plaub ntug.

1. Tig lub hwj chim mov los yog khib lub hwj chim tawm thiab disconnect lub hwj chim cable.
2. Ntxig qhov txuas 16-pin txuas rau ntawm lub hwj chim cable rau hauv lub qhov (socket) ntawm lub hwj huam hluav taws xob lossis rooj plaub khib. Lub txuas muaj cov kab ntawv uas yuav ua kom haum nrog qhov sib txawv hauv lub qhov (socket), yog li nws tsis tuaj yeem muab tso tsis raug. Yog tias lub hwj huam tsis muaj lub pob ntsaws qhov muag, nco ntsoov qhia tus lej 1 (-12 V) nrog rau txoj kab liab liab ntawm txoj kab txuas.
3. Ntxig lub 10-pin connector rau hauv lub qhov (socket) nyob rau sab nraum qab ntawm lub module. Lub connector muaj ib tug tab uas yuav dlhos nrog lub qhov (socket) kom raug orientation.
4. Tom qab ob qho kawg ntawm lub hwj chim cable tau txuas ruaj ntseg, koj tuaj yeem txuas lub module rau hauv rooj plaub thiab tig rau lub hwj chim.

Kev teeb tsa

Qhov tsim nyog screws nrog rau qhov module rau mounting nyob rau hauv ib rooj plaub Eurorack. Txuas lub hwj chim cable ua ntej mounting.
Nyob ntawm cov ntaub ntawv khib, tej zaum yuav muaj cov ntu qhov sib nrug sib nrug 2 HP sib nrug raws qhov ntev ntawm rooj plaub, lossis ib txoj hauv kev uas tso cai rau ib tus neeg xaim phaj los xaub raws qhov ntev ntawm rooj plaub. Cov phiaj hlau txav mus dawb tso cai tso qhov tseeb ntawm tus qauv, tab sis txhua lub phaj yuav tsum tau muab tso rau hauv qhov kwv yees txheeb ze rau qhov sib dhos hauv koj qhov qauv ua ntej txuas cov ntsia hlau.
Tuav tus qauv tiv thaiv Eurorack txoj kab kom txhua qhov ntawm qhov sib dhos tau ua ke nrog txoj hlua lossis xov phaj. Txuas cov ntsia hlau ib nrab los pib, uas yuav tso cai hloov kho me me rau qhov chaw thaum koj tau txais txhua txoj hauv kev. Tom qab txoj haujlwm zaum kawg tau tsim, ua kom nruj cov ntsia hlau.

Specifications

Cov tswv yim
Oscillator rau / tawm
Hom	2 x 3.5 hli TS jacks, AC ua ke
Impedance	> 3 kΩ, ntsuas tsis tau
Qib siab tshaj tawm	+5 V
Yam tsawg kawg hloov ntawm qhov pib	+3.5 V txhais
Tswj cov tswv yim
Hom	3.5 hli TS jack, 1 V / oct
Impedance	100 kΩ, tsis sib npaug
Qib siab tshaj tawm	± 2 V, vernier teeb tsa 5
Ua haujlwm cov tswv yim
Hom	3.5 hli TS jack, DC-coupled
Impedance	7 kΩ, tsis sib npaug
Qib siab tshaj tawm	± 5V
Yam tsawg kawg hloov ntawm qhov pib	+1.5 V
Stage ua
Hom	8 x 3.5 hli TS jacks, AC ua ke
Impedance	> 3 kΩ, ntsuas tsis tau
Qib siab tshaj tawm	+5 V
Yam tsawg kawg hloov ntawm qhov pib	+3.5 V txhais
Cov zis
Tshais outputs
Hom	6 x 3.5 mm TS jacks, DC-txuas
Impedance	500 Ω, ntsuas tsis tau
Cov zis siab tshaj plaws	+8V (X4)
Stage trigger outputs
Hom	8 x 3.5 mm TS jacks, DC-txuas
Impedance	250 Ω, ntsuas tsis tau
Cov zis siab tshaj plaws	+5 V, nquag ua haujlwm siab
Tso zis Oscillator
Hom	3.5 hli nkaus, DC-txuas
Impedance	4 kΩ, tsis sib npaug
Cov zis siab tshaj plaws	+4dBu
Lub luag haujlwm voj voog	90%

Tswj
Ntau zaus	5 (0.7 txog 8 Hz), 6 (44 txog 500 Hz)
Zaus vernier	Kho qhov oscillator range, 3-octave range
Oscillator rau / tawm	Kev tsim tus kheej pib lossis nres cov oscillator
Voltage knob	#NWS?
Hloov hom	Hla stage, luaj stage, nres lub sequencer
Teeb	Xaiv tus kheej stage
Ntau yam keyboards	X1 (+2 V), X2 (+4 V), X4 (+8 V) max. tsim tawm
Sijhawm rau / tawm	Tso cai rau 3rd-kab knobs tswj
Hloov khawm	stage ntev
Hwj chim
Fais fab mov	Eurorack
Tam sim no kos	100 mA (+ 12 V), 50 mA (-12 V)
Lub cev
Qhov ntev	284 x 129 x 47 mm (11.2 x 5.1 x 1.9″)
Cov chav nyob khib	56hp ua
Qhov hnyav	0.64 kg (1.41 lbs)

Ntawm no, Pawg Neeg Suab Nkauj tshaj tawm tias cov khoom no ua raws li Cov Lus Qhia 2014/30/EU, Cov Lus Qhia 2011/65/EU, Hloov Kho 2015/863/EU, Cov Lus Qhia 2012/19/EU, Kev Cai 519/2012 REACH thiab Directive 1907/2006 XNUMX/EC.
Cov ntawv sau tag nrho ntawm EU DoC muaj nyob ntawm https://community.musictribe.com/
Tus Neeg Sawv Cev EU: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark
Peb Hnov Koj Hais

Cov ntaub ntawv / Cov ntaub ntawv

Behringer 960 Sequential Controller Legendary Analog Kauj Ruam Sequencer Module rau Eurorack [ua pdf] Cov neeg siv phau ntawv qhia 960 Sequential Controller Legendary Analog Kauj Ruam Sequencer Module rau Eurorack, 960, Sequential Controller Legendary Analog Kauj Ruam Sequencer Module rau Eurorack

Cov ntaub ntawv

• Cov neeg siv phau ntawv