Tataiso ea ho Qala ka Potlako
960 TAOLI TLHALOSO
Pale ea nalane ea Analog Mohato oa Sequencer bakeng sa Eurorack
V 1.0
TLHOKOMELO MOLAO
Music Tribe ha e amohele molato bakeng sa tahlehelo efe kapa efe e ka hlahelwang ke motho ofe kapa ofe ya itshetlehileng ka botlalo kapa ka karolo ya yona tlhalosong efe kapa efe, senepe, kapa setatemente se teng mona. Litlhaloso tsa tekheniki, ponahalo, le lintlha tse ling li ka fetoha ntle le tsebiso. Matshwao ohle a kgwebo ke thepa ya beng ba ona. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones, le Coolaudio ke matšoao a khoebo kapa matšoao a ngolisitsoeng a Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Litokelo tsohle li sirelelitsoe.
TIISETSO MOEKETSI
Bakeng sa lipehelo le lipehelo tse sebetsang tsa tiisetso le lintlha tse ling mabapi le Tiisetso e Lekanyelitsoeng ea Music Tribe, ka kopo bona lintlha tse felletseng inthaneteng ho @motswedingfm.
960 MOLAOLI OA TS'OANELO EA TS'ELISO
- OSCILLATOR - Khetha sebaka se sephara sa oscillator ka konopo ea Frequency Range, 'me u hlophise hantle ka knob ea Frequency Vernier. Kopanya kapa u tlose oscillator ka letsoho ka likonopo tsa OSC ON le OFF, kapa u hokahane le matšoao a liheke tsa kantle ho laola boemo ba ho tima / ho tima.
- TAOLO KEKETSO - Amohela voltage ho tloha mojuleng o mong ho laola maqhubu a oscillator.
- SEBONOLO OSCILLATOR - Romella lets'oao la oscillator ka thapo ea 3.5 mm TS.
- IN – Kenya tshebetsong leqtage ka molumo oa kantletage trigger (V-trig). Hlokomela hore joalo katage IN e ke ke ea lokisoa ho e 'ngoe stage TSOA.
- TSOA – Romela voltage trigger (V-trig) pontšo ho mojulung o mong.
- HLOKOMELA – Ka bowena kenya tshebetsong e letage. Ha ho ka ba le phoso ea tatellano, tobetsa konopo efe kapa efe ea SET ho qala ho ba joalo katage le ho khutlisetsa ts'ebetso e tloaelehileng.
- STAGE MOKHOA – Boemong bo Tlwaelehileng, stage tsamaisa potoloho ea eona 'me e fetela pele ho lets e latelangtage. Ho khetha Skip setting ho tla feta stage, le ho khetha Emisa ho tla emisa tatellano. A 9th stage teng ho ntšetsa pele tatelano (Skip) kapa Emisa tatelano ho stage 9 e etsang stage 9 tlhahiso e sebetsang. Neng kapa neng ha stage 9 e fetoha e sebetsang, oscillator e tima ka bo eona.
- TLHOKOMELOTAGE MOLAOLI - Fetola molumotage bakeng sa se seng le se sengtage. LED e amanang le eona e tla khantša ho bontša stage.
- SEHLOOHO KAROLO – Romela voltage ho tloha ka 8stagho ea ho li-module tse ling. Liphetho li ka lekanngoa ka likonopo tse amanang le 1, 2, kapa 4.
- 3RD MOLAO NAKO - Kaha basebelisi ba bangata ba tla tsamaisa 960 joalo ka 8-stage kapa 16-stage sequencer (ka li-module tsa 962), mola oa 3 o ka sebelisoa ho laola nako ea s.tage. Tsamaisa swichi sebakeng sa ON 'me u lokise se seng le se sengtage's 3rd knob ho lelefatsa kapa ho khutsufatsa nako.
- PHATHISA Laola ho fetoha ka mohloli o kantle kapa ka letsoho ka konopo.
24-Stage Sebetsa
Sepheo se seholo sa 962 sequential switch module ke ho khetha ka tsela e fapaneng pakeng tsa mela e 3 ea tlhahiso ea 960 ho theha 24-s.tage tatellano. Kopanya koloko ea ho qhomisa OUT ho tloha ho stage 1 ho kenyelletso ea SHIFT ea 962. Kopanya mela e 3 ea tlhahiso ea A, B, le C ho tloha ho 960 ho ea ho tse 962 tse 3 tsa SIG. Hona joale tlhahiso ea 962 e tla ba 24-stage sequencer tlhahiso kapa u tlohele thapo ea patch ea C bakeng sa mehato e 16.
Tsamaiso ea tokiso
- Matlafatsa li-module tsa 960 ebe o tobetsa konopo ea OSC ON. Lumella yuniti hore e futhumale ka metsotso e seng mekae.
- Lokisetsa litlhophiso tse latelang tsa taolo:
a. Etsa hore switch ea 3RD ROW CONTROL OF TIMEING e tima.
b. Beha switch FREQUENCY rotary ho 6 sekaleng.
c. Etsa bonnete ba hore ha ho jack e hoketsoeng ho oscillator CONTROL INNPUT. - Beha FREQUENCY VERNIER bakeng sa 100 Hz hantle ho OSCILLATOR OUTPUT e lekantsoeng ka meter e nepahetseng ea maqhubu 'me u lokise DUTY CYCLE ADJ bakeng sa potoloho ea 90% ea mosebetsi.
- Beakanya sekala sa maqhubu a phahameng a 960 oscillator ka tsela e latelang:
a. Sebetsa hantle +2.0 VDC ho jeko ea CONTROL INPUT (Mojule oa 921A o ka sebelisoa ho fana ka +2.0 VDC kapa o sebelisa mochini o tsitsitseng o tlase o tsitsitseng o tlase.tage mohloli).
b. Fokotsa 960 SCALE ADJ trimmer ho seta 400 Hz, ebe u tlosa kenyeletso ea +2.00 V ebe u khutlisetsa 960 FREQ VERNIER ho 100 Hz.
c. Pheta potoloho ena ho fihlela bobeli ba 100 Hz le 400 Hz li nepahetse ho ±1 Hz ha +2.00 VDC e hokeloa le ho tsoa jekeng ea CONTROL INPUT. - Lokisa maqhubu a tlase a 960 oscillator ka tsela e latelang:
a. Etsa kopo hantle -2.0 VDC ho jeko ea CONTROL INPUT (Mojule oa 921A o ka sebelisoa ho fana
the -2.00 VDC kapa sebelisa e tšoanang tlaase-impedance stable-voltage mohloli).
b. Fokotsa trimmer ea 960 LOW-END ADJ ho seta 25 Hz, ebe u ntša -2.00 V input 'me u fetole 960 FREQ VERNIER ho 100 Hz.
c. Pheta potoloho ena ho fihlela bobeli 100 Hz le 25 Hz li nepahetse ho ± 1 Hz ha -2.00 VDC e hokeloa le ho tsoa jacking ea CONTROL INPUT. - Behantsha maqhubu a phahameng a 960 oscillator ka tsela e latelang:
a. Etsa bonnete ba hore ha ho jekete e hoketsoeng ho CONTROL INPUT.
b. Beha FREQUENCY VERNIER ka ho feletseng ho latela oache (10 sekaleng).
c. Fetola sethatho sa FREQUENCY ADJUST hore se behe 500 Hz hantle ho OSCILLATOR OUTPUT.
d. Etsa kopo hantle +2.0 VDC ho jeko ea CONTROL INPUT (sena se ka thibela oscillator ho sebetsa).
e. Fetola trimmer ea FREQ STOP ADJ ho fihlela oscillator e qala ho sebetsa 'me u behe maqhubu a mangata ho pota 550 Hz.
f. Tlosa +2.0 VDC CONTROL INNPUT mme u hlahlobe maqhubu a oscillator ke 500 Hz.
Fetola trimmer ea FREQUENCY ADJUST ha ho hlokahala.
g. Etsa kopo hantle +2.0 VDC ho jack CONTROL INPUT jack, haeba oscillator e ntse e sebetsa, ho fokotsa ho phethiloe. Haeba ho se joalo, pheta kamoo ho hlokahalang.
Khokelo ea Matla
Mojule o tla le thapo ea motlakase e hlokahalang bakeng sa ho hokela ho sistimi e tloaelehileng ea phepelo ea motlakase ea Eurorack. Latela mehato ena ho hokela matla mojulung ona. Ho bonolo haholoanyane ho etsa lihokelo tsena pele module e kentsoe ka har'a mokotla oa thepa.
- Tima motlakase kapa rack case motlakase o tima ebe o hakolla thapo ea motlakase.
- Kenya sehokedi sa lipini tse 16 ka thapo ea motlakase ka har'a soketeng ea phepelo ea motlakase kapa mokotleng oa rack. Sehokedi se na le tabo e tla tsamaellana le lekhalo le ka soketeng, ka hona e ke ke ea kengoa ka nepo. Haeba phepelo ea motlakase e se na socket e nang le linotlolo, etsa bonnete ba hore o tsamaisa pin 1 (-12 V) ka mola o mofubelu thapo.
- Kenya sehokelo sa li-pin tse 10 ka soketeng e ka morao ea mojule. Sehokelo se na le tab e tla ikamahanya le sokete bakeng sa mokhoa o nepahetseng.
- Ka mor'a hore lipheletsong tse peli tsa thapo ea motlakase li hokeletsoe ka mokhoa o sireletsehileng, u ka kenya mojule ka khese ebe o bulela phepelo ea motlakase.
Ho kenya
Lisebelisoa tse hlokahalang li kenyelelitsoe le module ea ho kenya mochini oa Eurorack. Kopanya thapo ea motlakase pele o hloa.
Ho ipapisitsoe le mokotla oa mokotla, ho kanna ha ba le likoti tse sa fetoheng tse arohaneng ka 2 HP ka bolelele ba nyeoe, kapa pina e lumellang lipoleiti ka bomong hore li thellele bolelele ba nyeoe. Lipoleiti tse tsamaeang ka bolokolohi li lumella boemo ba mojule hantle, empa poleiti ka 'ngoe e lokela ho beoa kamanong e lekantsoeng le masoba a ntseng a hola mojuleng oa hau pele u hokela lisurufu.
Tšoara mojule khahlanong le liporo tsa Eurorack e le hore masoba a mang le a mang a tsamaellanang le seporo se kopantsoeng kapa poleiti e khoele. Hokela lisurufu lehlakoreng le leng ho qala, tse tla lumella liphetoho tse nyane maemong moo o li lumellang kaofela. Ka mor'a hore boemo ba ho qetela bo thehoe, tiisa lisepa.
Litlhaloso
| Lintho tse kenang | |
| Oscillator bulela / tima | |
| Mofuta | 2 x 3.5 mm TS jacks, AC e kopane |
| Tšitiso | > 3 kΩ, e sa leka-lekanang |
| Boholo ba ho kenya | + 5 V |
| Bonyane ba phetoho | +3.5 V thunya |
| Laola ho kenya | |
| Mofuta | 3.5 mm TS jack, 1 V / oct |
| Tšitiso | 100 kΩ, e sa leka-lekanang |
| Boholo ba ho kenya | ± 2 V, vernier e behiloe ho 5 |
| Ho kenya Shift | |
| Mofuta | 3.5 limilimithara TS jack, DC-mahanngoa |
| Tšitiso | 7 kΩ, e sa leka-lekanang |
| Boholo ba ho kenya | ± 5 V |
| Bonyane ba phetoho | + 1.5 V |
| Stagli-triggers | |
| Mofuta | 8 x 3.5 mm TS jacks, AC e kopane |
| Tšitiso | > 3 kΩ, e sa leka-lekanang |
| Boholo ba ho kenya | + 5 V |
| Bonyane ba phetoho | +3.5 V thunya |
| Litholoana | |
| Litholoana tsa mela | |
| Mofuta | 6 x 3.5 mm TS jacks, DC e kopantsoe |
| Tšitiso | 500 Ω, e sa leka-lekanang |
| Boemo bo phahameng ba tlhahiso | +8 V (Range X4) |
| Stage trigger outputs | |
| Mofuta | 8 x 3.5 mm TS jacks, DC e kopantsoe |
| Tšitiso | 250 Ω, e sa leka-lekanang |
| Boemo bo phahameng ba tlhahiso | +5 V, e sebetsa ka matla |
| Tlhahiso ea Oscillator | |
| Mofuta | 3.5 mm jack, DC e kopantsoe |
| Tšitiso | 4 kΩ, e sa leka-lekanang |
| Boemo bo phahameng ba tlhahiso | +4 dBu |
| Potoloho ea mosebetsi | 90% |
| Litaolo | |
| Sebaka sa maqhubu | 5 (0.7 ho isa ho 8 Hz), 6 (44 ho isa ho 500 Hz) |
| Maqhubu vernier | Hlophisa sebaka sa oscillator, sebaka sa 3-octave |
| Oscillator bulela / tima | Ka letsoho qala kapa emisa oscillator |
| Moqtaglikotola | # LEBITSO? |
| Phetoho ea mokhoa | Tlola stage, bapala stage, emisa sequencer |
| Beha | Ka bouena khetha stage |
| Liphetoho tse fapaneng | X1 (+ 2 V), X2 (+4 V), X4 (+8 V), max. tlhahiso |
| Nako ea ho bulela / ho tima | E lumella likonopo tsa mela ea boraro ho laola |
| Shift konopo | stage nako |
| Matla | |
| Phepelo ea motlakase | Eurorack |
| Tlhōlo ea hona joale | 100 MA (+12 V), 50 mA (-12 V) |
| Ea nama | |
| Litekanyo | 284 x 129 x 47 mm (11.2 x 5.1 x 1.9″) |
| Lisebelisoa tsa rack | 56 HP |
| Boima ba 'mele | 0.64 lik'hilograma (1.41 lbs) |
Ka hona, Music Tribe e phatlalatsa hore sehlahisoa sena se lumellana le Directive 2014/30/EU, Directive 2011/65/EU, Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC le Directive/1907 Directive. 2006/EC.
Temana e felletseng ea EU DoC e fumaneha ho https://community.musictribe.com/
Moemeli oa EU: Mefuta ea Meriana ea Meriana DK A/S
Aterese: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark
Rea U Utloa
Litokomane / Lisebelisoa
 |
behringer 960 Sequential Controller Legendary Analog Mohato Sequencer Mojule bakeng sa Eurorack [pdf] Bukana ea Mosebelisi 960 Sequential Controller Legendary Analog Step Sequencer Module bakeng sa Eurorack, 960, Sequential Controller Legendary Analog Step Sequencer Module bakeng sa Eurorack |
