BAFANG DP C244.CAN Mounting Parameters Zaub

TSEEM CEEB

• Yog tias cov ntaub ntawv yuam kev los ntawm cov zaub tsis tuaj yeem raug kho raws li cov lus qhia, thov hu rau koj lub khw muag khoom.
• Cov khoom yog tsim los ua kom tsis muaj dej. Nws raug nquahu kom tsis txhob submerging cov zaub hauv qab dej.
• Tsis txhob ntxuav cov zaub nrog lub dav hlau dav hlau, lub tshuab nqus tsev siab los yog cov kav dej.
• Thov siv cov khoom no nrog kev saib xyuas.
• Tsis txhob siv cov thinners lossis lwm cov kuab tshuaj los ntxuav cov zaub. Cov tshuaj zoo li no tuaj yeem ua rau lub ntsej muag puas.
• Warranty tsis suav nrog vim hnav thiab siv li qub thiab kev laus.

INTRODUCTION OF DISPLAY

• Qauv: DP C244.CAN / DP C245.CAN
• Cov khoom siv hauv tsev yog ABS; LCD zaub qhov rais yog ua los ntawm tempered iav:
  
• Daim ntawv cim npe yog raws li nram no:
  
  
  
  
  Nco tseg: Thov khaws daim ntawv lo QR code txuas nrog rau cov zaub cable. Cov ntaub ntawv los ntawm Label yog siv rau kev hloov kho software tom qab

KHOOM PLIG

Specifications

• Ua haujlwm kub: -20 ℃ ~ 45 ℃
• Cia kub: -20 ℃ ~ 60 ℃
• Waterproof: IP65
• Cia Humidity: 30% -70% RH

Muaj nuj nqi Tshajview

• CAN kev sib txuas lus raws tu qauv
• Kev qhia ceev (nrog rau lub sijhawm ceev ceev, max. ceev thiab nruab nrab ceev)
• Chav tsev hloov ntawm km thiab mais
• Roj teeb muaj peev xwm qhia tau
• Tsis siv neeg sensors piav qhia txog lub teeb pom kev zoo
• Brightness teeb rau backlight
• 6 lub zog pab hom
• Mileage taw qhia (nrog rau ib qho kev mus ncig ib leeg TRIP thiab tag nrho qhov deb ODO, qhov siab tshaj plaws yog 99999)
• Qhov taw qhia ntse (nrog rau qhov seem seem RANGE thiab lub zog noj CALORIE)
• yuam kev code qhia
• Kev pab taug kev
• USB them (5V thiab 500mA)
• Kev pab qhia
• Bluetooth Function (tsuas yog hauv DP C245.CAN)

DISPLAY

1. Headlight qhia
2. USB charger qhia
3. Kev pab qhia
4. Bluetooth qhia (tsuas yog lub teeb hauv DP C245.CAN)
5. Lub zog pab hom qhia
6. Multifunction qhia
7. Roj teeb muaj peev xwm qhia tau
8. Ceev hauv lub sijhawm tiag tiag

TSEEM CEEB

IB TUG NEEG

Fais fab ON/OFF

Xovxwm thiab tuav (> 2S) rau lub hwj chim ntawm HMI, thiab HMI pib qhia lub khau raj LOGO.
Xovxwm thiab tuav (> 2S) dua kom lub hwj chim tawm HMI.
Yog tias lub sijhawm kaw tsis siv neeg raug teeb tsa rau 5 feeb (teeb tsa ua haujlwm "Auto Off"), HMI yuav raug txiav tawm hauv lub sijhawm teeb tsa no, thaum nws tsis ua haujlwm.

Fais fab pab hom xaiv
Thaum HMI qhib, nias luv luv or  xaiv lub hwj chim pab hom thiab hloov lub tso zis hwj chim. Hom qis tshaj plaws yog E, hom siab tshaj plaws yog B (uas tuaj yeem teeb tsa). Ntawm lub neej ntawd yog hom E, tus lej "0" txhais tau tias tsis muaj kev pabcuam fais fab.

Hom	Xim	Txhais
Eco	ntsuab	hom kev lag luam tshaj plaws
Ncig saib	xiav	hom kev lag luam tshaj plaws
Kev ua si nawv	xim av	hom kev ua si nawv
Kev ua si nawv +	liab	lub sport plus mode
Boost	ntshav liab	hom kev ua si uas muaj zog tshaj plaws

Multifunction Xaiv
Luv luv nias khawm hloov cov haujlwm sib txawv thiab cov ntaub ntawv.
Circularly qhia ib qho kev mus txawv tebchaws (TSI, km) → tag nrho nrug (ODO, km) → siab tshaj plaws ceev (MAX, km / h) → nruab nrab ceev (AVG, km / h) → seem nrug (Range, km) → caij cadence ( Cadence, rpm) → lub zog noj (Cal, KCal) → caij lub sij hawm (TIME, min) → voj voog.

Headlights / Backlighting
Nias thiab tuav (> 2S) tig lub teeb taub hau thiab txo cov teeb pom kev zoo.
Nias thiab tuav (> 2S) dua los tua lub teeb taub hau thiab ua kom lub teeb ci ntsa iab.
Lub ci ci ntawm lub teeb ci tuaj yeem teeb tsa hauv kev ua haujlwm "Brightness" hauv 5 qib.

Taug kev pab
Nco tseg: Kev pab taug kev tsuas yog qhib tau nrog lub pedelec sawv ntsug.
Luv luv nias khawm kom txog thaum lub cim no tshwm. Tom ntej no kom nias lub khawm kom txog thaum qhov kev pabcuam taug kev yog qhib thiab lub cim yog flashing.(Yog tias tsis pom lub teeb liab ceev, qhov ceev ntawm lub sij hawm yog qhia raws li 2.5km / h.) Thaum tso tawm khawm, nws yuav tawm ntawm txoj kev pab thiab cov lub cim nres flashing. Yog tias tsis muaj kev ua haujlwm hauv 5s, cov zaub yuav rov qab mus rau 0 hom.

Roj teeb muaj peev xwm qhia tau
Qhov percentage ntawm tam sim no lub roj teeb muaj peev xwm thiab tag nrho lub peev xwm yog tso tawm los ntawm 100% mus rau 0% raws li lub peev xwm tiag tiag.

USB Charge Function
Thaum lub HMI raug kaw, ntxig lub USB ntaus ntawv mus rau lub USB them chaw nres nkoj ntawm HMI, thiab tom qab ntawd qhib HMI kom them. Thaum lub HMI qhib, nws tuaj yeem them ncaj qha rau USB ntaus ntawv. qhov siab tshaj them voltage yog 5V thiab qhov siab tshaj plaws them tam sim no yog 500mA.

Bluetooth Muaj nuj nqi
Nco tseg: Tsuas yog DP C245.CAN yog Bluetooth version.
DP C245 nruab nrog Bluetooth 5.0 ca txuas nrog Bafang Go APP. Cov neeg siv khoom kuj tuaj yeem tsim lawv tus kheej APP raws li SDK muab los ntawm BAFANG.
Cov zaub no tuaj yeem txuas nrog SIGMA lub plawv dhia band thiab qhia nws ntawm cov zaub, thiab tseem tuaj yeem xa cov ntaub ntawv mus rau lub xov tooj ntawm tes.
Cov ntaub ntawv uas tuaj yeem xa mus rau lub xov tooj ntawm tes yog raws li hauv qab no:

Tsis muaj.	Muaj nuj nqi
1	Ceev
2	Roj teeb muaj peev xwm
3	Txhawb nqa qib
4	Cov ntaub ntawv roj teeb.
5	Sensor teeb liab
6	Nyob deb
7	Kev siv hluav taws xob
8	System part info.
9	Tam sim no
10	Lub plawv dhia
11	Ib qhov deb
12	Tag nrho nrug
13	Headlight xwm txheej
14	yuam kev code

(Bafang Mus rau AndroidTM thiab iOSTM)
 

SETTINGS

Tom qab HMI tau qhib, nias thiab tuav thiab khawm (nyob rau tib lub sijhawm) nkag mus rau hauv qhov chaw teeb tsa interface. Luv luv (<0.5S) or khawm xaiv "Setting", "Information" lossis "Tawm", ces luv luv nias (<0.5S) khawm kom paub meej.

"Setting" interface

Tom qab HMI qhib rau, nias thiab tuav thiab khawm kom nkag mus rau hauv qhov chaw teeb tsa interface. Luv luv (<0.5S) or xaiv "Setting" thiab nias luv luv (<0.5S) kom paub meej.

"Unit" Xaiv nyob rau hauv km / mais
Luv luv nias or xaiv "Unit", thiab luv luv nias nkag mus rau hauv cov khoom. Tom qab ntawd xaiv ntawm "Metric" (kilometer) lossis "Imperial" ( mais) nrog rau or khawm.
Thaum koj tau xaiv qhov koj xav tau, nias lub pob (<0.5S) txuag thiab tawm rov qab mus rau "Setting" interface.

"Auto Off" Teem sijhawm tsis siv neeg Off
Luv luv nias or xaiv "Auto Off", thiab luv luv nias nkag mus rau hauv cov khoom.
Tom qab ntawd xaiv lub sijhawm tsis siv neeg ua haujlwm li "OFF" / "1" / "2" / "3" / "4" / ​​"5" / "6" / "7" / "8" / "9" / "10" nrog rau or khawm. Thaum koj tau xaiv qhov koj xav tau, nias lub pob (<0.5S) txuag thiab tawm rov qab mus rau "Setting" interface.

Nco tseg: "OFF" txhais tau tias "Auto Off" muaj nuj nqi yog tawm.

"Brightness" Zaub brightness
Luv luv nias or xaiv "Brightness", thiab luv luv nias nkag mus rau hauv cov khoom. Ces xaiv tus percentage li "100%" / "75%" / "50%" / "25%" nrog rau or khawm. Thaum koj tau xaiv qhov koj xav tau, nias lub pob (<0.5S) txuag thiab tawm rov qab mus rau "Setting" interface.

"AL Sensitivity" Teem lub teeb rhiab heev
Nyem luv luv lossis xaiv "AL Sensitivity", thiab luv luv nias nkag mus rau hauv cov khoom. Tom qab ntawd xaiv cov theem ntawm lub teeb rhiab heev li "OFF" / "1" / "2" / "3" / "4" / ​​"5" nrog lub pob lossis khawm. Thaum koj tau xaiv qhov koj xav tau, nias lub pob (<0.5S) kom txuag thiab tawm rov qab mus rau "Setting" interface.

Nco tseg: "OFF" txhais tau hais tias lub teeb sensor raug kaw. Qib 1 yog qhov tsis muaj zog tshaj plaws thiab qib 5 yog qhov muaj zog tshaj plaws.

"TRIP Reset" Teem caij rov pib ua haujlwm rau ib leeg mus txawv tebchaws
Luv luv nias or xaiv "TRIP Reset", thiab nias luv luv nkag mus rau hauv cov khoom. Tom qab ntawd xaiv "NO" / "YES" ("YES" - kom tshem tawm, "NO"-tsis ua haujlwm) nrog rau or khawm. Thaum koj tau xaiv qhov koj xav tau, nias lub pob (<0.5S) txuag thiab tawm rov qab mus rau "Setting" interface.

Nco tseg: Lub sij hawm caij tsheb (TIME), qhov nruab nrab ceev (AVG) thiab qhov siab tshaj plaws (MAXS) yuav rov pib dua ib txhij thaum koj rov pib TRIP

"Kev Pabcuam" Qhib / tawm Kev Pabcuam qhia
Luv luv nias or xaiv "Service", thiab luv luv nias nkag mus rau hauv cov khoom.
Tom qab ntawd xaiv "OFF" / "ON" ("ON" txhais tau tias kev qhia txog kev pab cuam yog nyob rau; "OFF" txhais tau tias Service qhia tawm) nrog rau or khawm.
Thaum koj tau xaiv qhov koj xav tau, nias lub pob (<0.5S) txuag thiab tawm rov qab mus rau "Setting" interface.

Nco tseg: Qhov kev teeb tsa pib yog OFF. Yog tias ODO ntau dua 5000 km, qhov "Service" qhia thiab qhov taw qhia mileage yuav flash rau 4S.

“Cov ntaub ntawv”
Tom qab HMI tau qhib, nias thiab tuav thiab nkag mus rau hauv qhov teeb tsa muaj nuj nqi. Luv luv (<0.5S) or xaiv "Cov Ntaub Ntawv" thiab tom qab ntawd luv luv nias (<0.5S) kom paub meej.

Nco tseg: Tag nrho cov ntaub ntawv ntawm no tsis tuaj yeem hloov pauv, nws yuav tsum yog viewed xwb.

“Wheel Size”
Tom qab nkag mus rau nplooj ntawv "Cov Ntaub Ntawv", koj tuaj yeem pom "Wheel Size -Inch" ncaj qha.

“Speed ​​Limit”
Tom qab nkag mus rau nplooj ntawv "Cov Ntaub Ntawv", koj tuaj yeem pom "Speed ​​Limit -km / h" ncaj qha.

“Cov ntaub ntawv roj teeb”
luv luv nias los yog xaiv "Battery Info", thiab luv luv nias nkag mus, ces luv luv nias los yog mus rau view cov ntaub ntawv roj teeb (b01 → b04 → b06 → b07 → b08 → b09 → b10 → b11 → b12 → b13 → d00 → d01 → d02 → … → dn).
Nias lub pob (<0.5S) tawm rov qab mus rau "Cov Ntaub Ntawv" interface.
Nco tseg: Yog tias lub roj teeb tsis muaj kev sib txuas lus, koj yuav tsis pom cov ntaub ntawv los ntawm roj teeb.
View cov ntaub ntawv roj teeb

View lub hardware thiab software version ntawm roj teeb

Code	Code txhais	Chav tsev
b01 ua	Tam sim no kub	℃
b04 ua	Roj teeb voltage	mV
b06 ua	Tam sim no	mA
b07 ua	Cov roj teeb uas tseem tshuav	mAh
b08 ua	Roj teeb muaj peev xwm ntawm Full charged	mAh
b09 ua	kwv tij SOC	%
b10 ua	Absolute SOC	%
b11 ua	Cycle Times	sij hawm
b12 ua	Max Uncharge Time	Teev
b13 ua	Lub Sijhawm Uncharge Kawg	Teev
d 00 ua	Tus naj npawb ntawm tes
d 01 ua	Voltage Cell 1	mV
d 02 ua	Voltage Cell 2	mV
dn	Voltage Cell n	mV

CEEB TOOM: Yog tias tsis pom cov ntaub ntawv, "–" yuav tshwm sim.

“Display Info”
Luv luv nias or xaiv "Display Info", thiab luv luv nias nkag mus, luv luv nias or rau view "Hardware Ver" lossis "Software Ver".
Nias lub pob (<0.5S) rov qab mus rau "Information" interface.

"Ctrl Info"
Luv luv nias or xaiv "Ctrl Info", thiab luv luv nias nkag mus, luv luv nias or rau view "Hardware Ver" lossis "Software Ver".
Nias lub pob (<0.5S) rov qab mus rau "Information" interface.

“Sensor Info”
luv luv nias los yog xaiv "Sensor Info", thiab luv luv nias nkag mus, luv luv los yog rau view "Hardware Ver" lossis "Software Ver".

Nias lub pob (<0.5S) tawm rov qab mus rau "Cov Ntaub Ntawv" interface.

CEEB TOOM: Yog tias koj lub Pedelec tsis muaj lub zog torque, "–" yuav tshwm sim.

“Yam Code”
Luv luv nias or xaiv "Yam Code", thiab nias luv luv nkag mus, luv luv nias or rau view lus ntawm kev ua yuam kev rau kaum zaug dhau los ntawm "E-Code00" rau "E-Code09".Nias lub pob (<0.5S) rov qab mus rau "Information" interface.

YUS CODE DEFINITION

HMI tuaj yeem qhia qhov ua txhaum ntawm Pedelec. Thaum kuaj pom qhov yuam kev, ib qho ntawm cov lej yuam kev hauv qab no yuav raug qhia thiab.

Nco tseg: Thov ua tib zoo nyeem cov lus piav qhia ntawm tus lej yuam kev. Thaum qhov yuam kev code tshwm, thov ua ntej pib lub kaw lus. Yog tias qhov teeb meem tsis raug tshem tawm, thov hu rau koj tus neeg muag khoom lossis cov neeg ua haujlwm.

yuam kev	Tshaj tawm	Kev daws teeb meem
04	Lub throttle muaj txhaum.	1. Xyuas cov connector thiab cable ntawm lub throttle tsis puas thiab raug kev cob cog rua. 2. Disconnect thiab reconnect lub throttle, yog tias tseem tsis muaj nuj nqi thov hloov lub throttle.
05	Lub throttle tsis rov qab rau hauv nws txoj haujlwm raug.	Kos lub connector los ntawm lub throttle yog raug txuas. Yog tias qhov no tsis daws qhov teeb meem, thov hloov lub throttle.
07	Overvoltage kev tiv thaiv	1. Tshem tawm thiab rov ntxig lub roj teeb kom pom tias nws daws qhov teeb meem. 2. Siv cov cuab yeej BESST hloov kho tus maub los. 3. Hloov lub roj teeb los daws qhov teeb meem.
08	Kev ua yuam kev nrog lub teeb pom kev hauv tsev hauv lub cev muaj zog	1. Xyuas tag nrho cov connectors los ntawm lub cev muaj zog txuas kom raug. 2. Yog tias qhov teeb meem tseem tshwm sim, thov hloov lub cev muaj zog.
09	Yuam kev nrog lub cav theem	Thov hloov lub cev muaj zog.
10	Qhov kub hauv lub cav tau mus txog nws qhov kev tiv thaiv siab tshaj plaws	1. Tua lub kaw lus thiab cia lub Pedelec txias. 2. Yog tias qhov teeb meem tseem tshwm sim, thov hloov lub cev muaj zog.
11	Qhov ntsuas kub ntsuas hauv lub cev muaj qhov yuam kev	Thov hloov lub cev muaj zog.
12	Yuam kev nrog lub sensor tam sim no hauv tus maub los	Thov hloov tus maub los lossis tiv tauj koj tus neeg muag khoom.
13	Yuam kev nrog lub ntsuas kub ntsuas hauv lub roj teeb	1. Xyuas tag nrho cov connectors ntawm lub roj teeb kom raug txuas nrog lub cev muaj zog. 2. Yog tias qhov teeb meem tseem tshwm sim, thov hloov lub roj teeb.
14	Kev tiv thaiv kub hauv lub maub los tau mus txog nws qhov kev tiv thaiv siab tshaj plaws	1. Cia lub pedelec kom txias thiab rov pib lub kaw lus. 2. Yog tias qhov teeb meem tseem tshwm sim, thov hloov tus maub los lossis tiv tauj koj tus neeg muag khoom.
15	Kev ua yuam kev nrog lub ntsuas kub ntsuas hauv lub maub los	1. Cia lub pedelec kom txias thiab rov pib lub kaw lus. 2. Yog hais tias qhov teeb meem tseem tshwm sim, thov hloov tus tswj los yog hu rau koj tus neeg muag khoom.
21	Ceev sensor yuam kev	1. Rov pib lub kaw lus 2. Txheeb xyuas tias cov hlau nplaum txuas nrog cov lus hais tau ua raws li qhov ntsuas nrawm thiab qhov kev ncua deb ntawm 10 hli thiab 20 hli. 3. Txheeb xyuas tias qhov sib txuas ceev sensor txuas yog raug. 4. Txuas lub pedelec mus rau BESST, saib seb puas muaj lub teeb liab los ntawm lub sensor ceev. 5. Siv cov cuab yeej zoo tshaj plaws- hloov kho tus maub los saib seb nws puas daws qhov teeb meem. 6. Hloov lub sensor ceev kom pom tias qhov no tshem tawm qhov teeb meem. Yog tias qhov teeb meem tseem tshwm sim, thov hloov tus maub los lossis tiv tauj koj tus neeg muag khoom.
25	Torque teeb liab yuam kev	1. Txheeb xyuas tias txhua qhov kev sib txuas tau txuas raug raug. 2. Thov txuas lub pedelec mus rau BESST system saib seb puas tuaj yeem nyeem tau los ntawm BESST lub cuab yeej. 3. Siv cov cuab yeej BESST hloov kho tus maub los saib seb nws puas daws qhov teeb meem, yog tias tsis yog thov hloov lub torque sensor lossis tiv tauj koj tus neeg muag khoom.
26	Lub teeb liab ceev ntawm lub torque sensor muaj qhov yuam kev	1. Txheeb xyuas tias txhua qhov kev sib txuas tau txuas raug raug. 2. Thov txuas lub pedelec rau BESST system kom pom tias lub teeb liab ceev tuaj yeem nyeem tau los ntawm BESST cov cuab yeej. 3. Hloov cov Zaub kom pom seb qhov teeb meem puas daws tau. 4. Siv cov cuab yeej BESST hloov kho tus maub los saib seb nws puas daws qhov teeb meem, yog tias tsis yog thov hloov lub torque sensor lossis tiv tauj koj tus neeg muag khoom.
27	Overcurrent los ntawm maub los	Siv cov cuab yeej BESST hloov kho tus maub los. Yog tias qhov teeb meem tseem tshwm sim, thov hloov tus maub los lossis tiv tauj koj tus neeg muag khoom.
30	Kev sib txuas lus teeb meem	1. Xyuas tag nrho cov kev sib txuas ntawm lub pedelec yog raug txuas. 2. Siv cov cuab yeej BESST khiav qhov kev kuaj mob, saib seb nws puas tuaj yeem pom qhov teeb meem. 3. Hloov cov zaub kom pom seb qhov teeb meem puas daws tau. 4. Hloov EB-BUS cable kom pom tias nws daws qhov teeb meem. 5. Siv cov cuab yeej zoo tshaj plaws, rov kho dua tshiab ntawm tus tswj software. Yog tias qhov teeb meem tseem tshwm sim, thov hloov tus maub los lossis tiv tauj koj tus neeg muag khoom.
33	Nres teeb liab muaj qhov yuam kev (Yog tias nres sensors haum)	1. Xyuas tag nrho cov connectors raug txuas rau ntawm tus nres. 2. Hloov cov brakes kom pom seb qhov teeb meem puas daws tau. Yog tias muaj teeb meem txuas ntxiv thov hloov tus tswj lossis tiv tauj koj tus neeg muag khoom.
35	Kev kuaj xyuas Circuit Court rau 15V muaj qhov yuam kev	Siv cov cuab yeej BESST hloov kho tus maub los saib seb qhov no daws qhov teeb meem. Yog tias tsis yog, thov hloov tus maub los lossis tiv tauj koj tus neeg muag khoom.
36	Kev kuaj xyuas Circuit Court ntawm lub keypad muaj qhov yuam kev	Siv cov cuab yeej BESST hloov kho tus maub los saib seb qhov no daws qhov teeb meem. Yog tias tsis yog, thov hloov tus maub los lossis tiv tauj koj tus neeg muag khoom.
37	WDT Circuit Court yog faulty	Siv cov cuab yeej BESST hloov kho tus maub los saib seb qhov no daws qhov teeb meem. Yog tias tsis yog, thov hloov tus maub los lossis tiv tauj koj tus neeg muag khoom.
41	Total voltage los ntawm lub roj teeb siab dhau lawm	Thov hloov lub roj teeb.
42	Total voltage los ntawm lub roj teeb tsawg dhau	Thov them lub roj teeb. Yog tias qhov teeb meem tseem tshwm sim, thov hloov lub roj teeb.
43	Tag nrho lub zog los ntawm cov roj teeb hlwb siab dhau lawm	Thov hloov lub roj teeb.
44	Voltage ntawm ib leeg xwb siab dhau lawm	Thov hloov lub roj teeb.
45	Kub los ntawm lub roj teeb siab dhau lawm	Thov cia lub pedelec txias. Yog tias tseem muaj teeb meem, thov hloov lub roj teeb.
46	Qhov kub ntawm lub roj teeb qis dhau lawm	Thov nqa lub roj teeb rau hauv chav tsev kub. Yog tias qhov teeb meem tseem tshwm sim, thov hloov lub roj teeb.
47	SOC ntawm lub roj teeb siab dhau lawm	Thov hloov lub roj teeb.
48	SOC ntawm lub roj teeb tsawg dhau lawm	Thov hloov lub roj teeb.
61	Switching detection defect	1. Tshawb xyuas lub iav shifter tsis muaj jammed. 2. Thov hloov lub iav shifter.
62	Electronic derailleur tsis tuaj yeem tso tawm.	Thov hloov lub derailleur.
71	Electronic xauv yog jammed	1. Siv cov cuab yeej BESTT hloov kho cov Zaub kom pom tias nws daws qhov teeb meem. 2. Hloov cov zaub yog tias qhov teeb meem tseem tshwm sim, thov hloov lub ntsuas hluav taws xob.
81	Bluetooth module muaj qhov yuam kev	Siv cov cuab yeej zoo tshaj plaws, rov hloov kho cov software rau hauv cov zaub kom pom tias nws daws qhov teeb meem. Yog tsis yog, Thov hloov cov zaub.

WARN CODE DEFINITION

Ceeb toom	Tshaj tawm	Kev daws teeb meem
28	Torque sensor qhov pib pib yog qhov txawv txav.	Restart lub kaw lus thiab nco ntsoov tsis txhob ua rau lub crank nyuaj thaum rov pib dua.

Cov ntaub ntawv / Cov ntaub ntawv

BAFANG DP C244.CAN Mounting Parameters Zaub [ua pdf] Tus neeg siv phau ntawv DP C244.CAN Mounting Parameters Zaub, DP C244.CAN, Mounting Parameters Display, Parameters Display, Zaub

Cov ntaub ntawv

• Cov neeg siv phau ntawv