Manual mai amfani

PCE-THD 50 Zazzabi da Ƙwararren Bayanai

Jagoran mai amfani a cikin yaruka daban-daban neman samfur akan: http://www.pce-instruments.com

Bayanan aminci

Da fatan za a karanta wannan littafin a hankali kuma gaba ɗaya kafin amfani da na'urar a karon farko. Ƙwararrun ma'aikata ne kawai za a iya amfani da na'urar kuma ma'aikatan PCE Instruments su gyara su. Lalacewa ko raunin da ya haifar ta rashin kiyaye littafin an cire su daga alhakin mu kuma ba garantin mu ya rufe shi ba.

• Dole ne a yi amfani da na'urar kawai kamar yadda aka bayyana a cikin wannan jagorar koyarwa. Idan aka yi amfani da shi in ba haka ba, wannan na iya haifar da yanayi mai haɗari ga mai amfani da lalacewa ga mita.
• Ana iya amfani da kayan aikin kawai idan yanayin muhalli (zazzabi, dangi zafi, ...) suna cikin kewayon da aka bayyana a cikin ƙayyadaddun fasaha. Kada a bijirar da na'urar zuwa matsanancin zafi, hasken rana kai tsaye, matsanancin zafi, ko danshi.
• Kada a bijirar da na'urar ga girgiza ko girgiza mai ƙarfi.
• ƙwararrun ma'aikatan PCE Instruments ne kawai ya kamata a buɗe shari'ar.
• Kada kayi amfani da kayan aiki lokacin da hannunka ya jike.
• Kada ku yi wani canje-canje na fasaha ga na'urar.
• Ya kamata a tsaftace kayan aikin tare da talla kawaiamp zane. Yi amfani da tsabtace tsaka-tsaki na pH kawai, babu abrasives ko kaushi.
• Dole ne kawai a yi amfani da na'urar tare da na'urorin haɗi daga PCE Instruments ko makamancin haka.
• Kafin kowane amfani, bincika harka don lalacewar bayyane. Idan kowace lalacewa ta ganuwa, kar a yi amfani da na'urar.
• Kada kayi amfani da kayan a cikin yanayi masu fashewa.
• Ba za a wuce iyakar ma'auni kamar yadda aka bayyana a cikin ƙayyadaddun bayanai ba a kowane hali.
• Rashin kiyaye bayanan aminci na iya haifar da lalacewa ga na'urar da rauni ga mai amfani.

Ba mu ɗauki alhakin buga kurakurai ko wasu kurakurai a cikin wannan littafin ba.
Muna nuna ƙayyadaddun sharuɗɗan garantin mu waɗanda za a iya samun su a cikin sharuɗɗan kasuwancin mu gabaɗaya.
Idan kuna da wasu tambayoyi tuntuɓi Kayan aikin PCE. Ana iya samun bayanan tuntuɓar a ƙarshen wannan littafin.

Iyakar bayarwa

1 x zafin jiki da mai shigar da bayanan zafi PCE-THD 50
1 x nau'in thermocouple mai nau'in K
1 x kebul na USB
1 x PC software
1 x littafin mai amfani

Na'urorin haɗi

USB mains adaftar NET-USB
3.1 Bayanan fasaha

Yanayin iska
Kewayon aunawa	-20 … 60 °C (-4 ... 140 °F)
Daidaito	±0.5 °C @ 0 … 45 °C, ±1.0 °C a cikin sauran jeri ±1.0 °F @ 32 … 113 °F, ± 2.0 °F a cikin sauran jeri
Ƙaddamarwa	0.01°C/°F
Adadin ma'auni	3 Hz
Dangi zafi
Kewayon aunawa	0 … 100% RH
Daidaito	± 2.2 % RH (10 ... 90 % RH) @ 23 °C (73.4 °F) ± 3.2 % RH (<10,>90 % RH) @23 °C (73.4 °F).
Ƙaddamarwa	0.1% RH
Lokacin amsawa	<10 s (90% RH, 25 ° C, babu iska)
Thermocouple
Nau'in Sensor	K-nau'in thermocouple
Kewayon aunawa	-100 … 1372 °C (-148 ... 2501 °F)
Daidaito	± (1% ± 1 °C)
Ƙaddamarwa	0.01°C/°F 0.1°C/°F 1°C/°F
Ƙididdigar ƙididdiga
Wet kwan fitila zafin jiki	-20 … 60 °C (-4 ... 140 °F)
zafin raɓa	-50 … 60 °C (-58 ... 140 °F)
Ƙarin bayanan fasaha
Ƙwaƙwalwar ciki	99 data kungiyoyin
Tushen wutan lantarki	3.7V Li-ion baturi
Yanayin aiki	0 … 40 °C (32 104 °F) <80 % RH, mara sanyaya
Yanayin ajiya	-10 ... 60 °C (14 ... 140 °F) <80 % RH, mara taurin
Nauyi	248g (0.55 Ibs)
Girma	162 mm x 88 mm x 32 mm (6.38 x 3.46 x 1.26 ")

3.2 Gaba

1. Sensor da hular kariya
2. Nunin LC
3. Maɓallin dawo da bayanai
4. Ace maɓalli
5. Maɓallin kunnawa/kashe + wuta ta atomatik
6. K-type thermocouple soket
7. Maɓallin UNIT don canza naúrar °C/F
8. Maɓallin MODE (madaidaicin raɓa / rigar kwan fitila / yanayin yanayi)
9. Maɓallin REC
10. Maɓallin MIN/MAX
11. KYAUTA maɓalli

3.3 Nuni

1. Riƙe aikin yana farawa, ƙima ta daskare
2. Yanayin rikodi MAX/MIN yana farawa, ana nuna ƙimar MAX/MIN
3. Nuna ƙimar da aka auna daga ƙwaƙwalwar ajiyar ciki
4. Wet kwan fitila zafin jiki
5. Kashe wuta ta atomatik
6. Wurin ajiya na'ura. na ƙimar da aka auna daga ƙwaƙwalwar ciki
7. Naúrar zafi na dangi
8. zafin raɓa
9. K-nau'in zafin jiki na thermocouple
10. Naúrar zafin jiki
11. Nunin matakin baturi
12. Ikon don cikakken ƙwaƙwalwar ajiya
13. Icon don yin rikodi
14. Icon don haɗin kwamfuta ta USB

Umarnin aiki

4.1 Ma'auni

1. Danna maɓallin maɓalli don kunna mita.
2. Ajiye mitar a cikin mahalli a ƙarƙashin gwaji kuma ba da damar isasshen lokaci don karatun ya daidaita.
3. Danna maɓallin UNIT don zaɓar naúrar °C ko °F don auna zafin jiki.

4.2 Ma'aunin raɓa
Mitar tana nuna ƙimar yanayin zafi yayin da yake kunne. Danna maɓallin MODE sau ɗaya don nuna zafin raɓa (DP). Latsa maɓallin MODE sau ɗaya don nuna zafin kwan fitila (WBT). Danna maɓallin MODE sau ɗaya don komawa zuwa yanayin zafi. Za a nuna alamar DP ko WBT lokacin da kuka zaɓi wurin raɓa ko zafin kwan fitila.

Yanayin 4.3 MAX/MIN

1. Dole ne ku zaɓi wurin raɓa, rigar kwan fitila ko zafin yanayi kafin duba karatun MIN/MAX.
2. Danna maɓallin MIN/MAX sau ɗaya. Alamar "MAX" zata bayyana akan LCD kuma za'a nuna matsakaicin ƙimar har sai an auna ƙimar mafi girma.
3. Latsa maɓallin MIN/MAX kuma. Alamar “MIN” zata bayyana akan LCD kuma mafi ƙarancin ƙima za a nuna har sai an auna ƙananan ƙima.
4. Latsa maɓallin MIN/MAX kuma. Alamar "MAX/MIN" tana walƙiya akan LCD kuma ana nuna ƙimar ainihin lokacin. Ana yin rikodin ƙimar MAX da MIN a lokaci guda.
5. Danna maɓallin MIN/MAX sau ɗaya zai mayar da ku zuwa mataki na 1.
6. Don fita yanayin MAX/MIN, danna ka riƙe maɓallin MIN/MAX na kusan daƙiƙa 2 har sai gunkin “MAX MIN” ya ɓace daga LCD.

Lura:
Lokacin da yanayin MAX/MIN ya fara, duk maɓallai da ayyuka suna kashe su: Ajiye da HOLD.
4.4 Rike aiki
Lokacin da ka danna maɓallin HOLD, karatun yana daskarewa, alamar "H" tana bayyana akan LCD kuma an dakatar da auna. Latsa maɓallin HOLD kuma don komawa aiki na yau da kullun.
4.5 Ajiye kuma dawo da bayanai

1. Mitar na iya ajiye har zuwa ƙungiyoyin karatu 99 don tunawa da gaba. Kowane wurin ƙwaƙwalwar ajiya yana adana ɗanɗano zafi da zazzabi na yanayi haka kuma ko dai ma'aunin zafi da sanyio, zafin raɓa ko zafin kwan fitila.
2. Danna maɓallin Ajiye don adana bayanan yanzu zuwa wurin ƙwaƙwalwar ajiya. LCD zai dawo ta atomatik zuwa nuni na ainihin lokacin a cikin daƙiƙa 2. Bayan an yi amfani da wuraren ƙwaƙwalwar ajiya 99, bayanan da aka adana daga baya za su sake rubuta bayanan da aka ajiye a baya na wurin ƙwaƙwalwar ajiya ta farko.
3. Danna maɓallin maɓalli don tunawa da adana bayanai daga ƙwaƙwalwar ajiya. Danna maɓallin ▲ ko ▼ don zaɓar wurin ƙwaƙwalwar ajiya da kuke buƙata. Danna maɓallin maɓalli na daƙiƙa 2 don komawa yanayin al'ada.
4. Lokacin da aka tuna da wurin ƙwaƙwalwar ajiya, yanayin zafi na dangi da zafin yanayi ko ma'aunin zafin jiki na thermocouple ana nunawa ta tsohuwa. Latsa maɓallin MODE don kunna tsakanin jikakken kwan fitila ko ma'aunin zafin raɓa da aka ajiye a wurin da aka nuna.
5. Don share duk bayanan 99 da aka ajiye a ƙwaƙwalwar ajiya, danna ka riƙe duka Ajiye da maɓallai na tsawon daƙiƙa 3.

4.6 Ma'aunin zafin jiki na Thermocouple
Idan ana buƙatar auna zafin lamba akan abubuwa, yi amfani da binciken thermocouple. Ana iya haɗa kowane nau'in thermocouple zuwa wannan kayan aikin. Lokacin da aka toshe thermocouple a cikin soket akan mita, alamar "T/C" yana bayyana akan LCD. Yanzu thermocouple yana yin auna zafin jiki.

4.7 Kashewar wuta ta atomatik / hasken baya
Idan babu maɓalli a cikin daƙiƙa 60 a yanayin APO (kashe wuta ta atomatik) ko yanayin rikodi, hasken baya zai dushe ta atomatik don adana wuta. Danna kowane maɓalli don komawa zuwa babban haske. A cikin yanayin da ba na APO ba, hasken baya koyaushe yana haske sosai. Don tsawaita rayuwar baturi, na'urar tana kashe ta atomatik bayan kusan. Minti 10 ba tare da aiki ba.
Danna maɓallin maɓalli a hankali don kunna ko kashe aikin APO. Lokacin da gunkin APO ya ɓace, yana nufin an kashe wuta ta atomatik.
Danna maɓallin maɓalli na kusan daƙiƙa 3 don kashe mita.
Lura:
A yanayin rikodi, ana kashe aikin APO ta atomatik.
4.8 Rikodin bayanai

1. Hygrometer yana da ƙwaƙwalwar ajiya don bayanan bayanan 32000.
2. Kafin amfani da aikin shigar da bayanai, dole ne ka saita sigogi ta hanyar Smart Logger PC software. Don cikakken aiki, da fatan za a koma zuwa taimako file na Smart
   Logger software.
3. Lokacin da aka saita yanayin fara shiga zuwa "ta maɓalli", danna maɓallin REC akan mita zai fara aikin shigar da bayanai. Alamar "REC" yanzu zata bayyana akan LCD.
4. Lokacin da rikodin bayanan ya kai adadin da aka riga aka saita, gunkin "FULL" zai bayyana akan LCD kuma mita za ta kashe ta atomatik.
5. A yanayin shigar da bayanai, lokacin da aka danna maɓallin wuta don kashewa, gunkin "REC" zai yi haske. Saki maɓallin wuta nan da nan don soke wuta ko latsa ka riƙe maɓallin wuta na tsawon daƙiƙa 3 don kashe mita kuma shigar da bayanai zai tsaya.

4.9 Cajin baturi
Lokacin da matakin baturi bai isa ba, gunkin baturin zai yi haske akan allon LCD. Yi amfani da adaftar mains na DC 5V don haɗawa da tashar cajin micro USB a ƙasan mita. Alamar baturi akan allon LCD yana nuna matakin caji. Yi amfani da adaftan wuta wanda ya dace da ƙayyadaddun aminci.

Garanti

Kuna iya karanta sharuɗɗan garanti a cikin Babban Sharuɗɗan Kasuwancin mu waɗanda zaku iya samu anan: https://www.pce-instruments.com/english/terms.

zubarwa

Don zubar da batura a cikin EU, umarnin 2006/66/EC na Majalisar Turai ya shafi. Saboda gurɓatattun abubuwan da ke ƙunshe, batir dole ne a zubar da shi azaman sharar gida. Dole ne a ba su wuraren tattarawa da aka tsara don wannan dalili.
Domin bin umarnin EU 2012/19/EU, muna mayar da na'urorin mu. Ko dai mu sake amfani da su ko kuma mu ba su ga kamfanin sake yin amfani da su wanda ke zubar da na'urorin daidai da doka. Don ƙasashen da ke wajen EU, batura, da na'urori yakamata a zubar dasu daidai da ƙa'idodin sharar gida.

Idan kuna da wasu tambayoyi, tuntuɓi Kayan aikin PCE.

www.pce-instruments.com

Bayanan tuntuɓar kayan aikin PCE

Ƙasar Ingila PCE Instruments UK Ltd. girma Wurin shakatawa na Kasuwanci na 11 Southpoint Ensign Way, Kuduampton Hampshire Ƙasar Ingila, SO31 4RF Lambar waya: +44 (0) 2380 98703 0 Fax: +44 (0) 2380 98703 9 info@pce-instruments.co.uk www.pce-instruments.com/hausa

Amurka ta Amurka PCE Americas Inc. girma 1201 Jupiter Park Drive, Suite 8 Jupiter / Palm Beach 33458 fl Amurka Lambar waya: +1 561-320-9162 Fax: +1 561-320-9176 info@pce-americas.com www.pce-instruments.com/us

Takardu / Albarkatu

	PCE Instruments PCE-THD 50 Zazzabi da Mai Sauraron Bayanai [pdf] Manual mai amfani PCE-THD 50 Zazzabi da Mai Sauraron Bayanai na Humidity, PCE-THD 50, Zazzaɓi da Mai Sauraron Bayanai.
	PCE Instruments PCE-THD 50 Zazzabi da Mai Sauraron Bayanai [pdf] Manual mai amfani PCE-THD 50, PCE-THD 50 Zazzabi da Logger Data, Zazzabi da Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa

Magana

• Manual mai amfani