MC240 Biyu da Mai Kula da Ƙofar Ƙofa ɗaya
“
Ƙayyadaddun bayanai
- Samfura: Mai Kula da Ƙofa Biyu & Single
- Bugu: Fitowa na 9
- Website: www.elsema.com
- Siffofin:
- Dace don lilo da ƙofofin zamewa
- Yin aikin mota sau biyu ko ɗaya
- Eclipse Operating System (EOS)
- Dare da dare Sensor (DNS)
- 24 ko 12 Volt DC motar motar
- Mota taushi farawa da taushi tasha
- Saurin sauri da daidaita ƙarfi
- Babban LCD mai layin 4 don nuna matsayi da saitin masu sarrafawa
umarnin - 1-Karfafa taɓawa don saiti mai sauƙi
- Bayanan martaba ta atomatik ta amfani da sabuwar fasahar fasaha
- Abubuwan shigarwa daban-daban, maɓallin turawa, buɗewa kawai, rufe kawai, tsayawa,
masu tafiya a ƙasa da kuma Photoelectric Beam
- Bayani:
- Yana goyan bayan ƙayyadadden shigarwar sauyawa ko tashoshi na inji
- Daidaitacce Kusa ta atomatik, lodin toshewa da mai tafiya a ƙasa
shiga - Makulli mai daidaitacce da fitowar haske mai ladabi
- Canje-canjen ayyukan katako mai aminci na hoto
- Gina Mai karɓar Penta
- Yanayin tanadin makamashi don rage farashin aiki
- 12 da 24 Volt DC Fitar da wutar lantarki
- Lissafin sabis, kariyar kalmar sirri, yanayin hutu da yawa
ƙarin fasali - Gina cikin cajar baturi 12 da 24 Volt don ajiya
baturi - Ƙarƙashin halin yanzu na jiran aiki yana sa ya dace don ƙofofin hasken rana
Umarnin Amfani da samfur
Saita da Shigarwa
Duk shigarwa da gwaji dole ne a yi kawai bayan karantawa
da fahimtar duk umarnin a hankali. Ya kamata shigarwa
ƙwararrun ma'aikatan fasaha za su yi. Tabbatar da bi
gargadin aminci don hana raunuka ko lalacewar dukiya.
Aiki
Mai sarrafa MC yana fasalta Eclipse mai sauƙin amfani mai aiki
tsarin da ke ba da izinin sarrafawa mai sauƙi, saiti, da aiki na
Ƙofofin atomatik, kofofi, da shinge. Yi amfani da maɓallin taɓawa 1
don sarrafa ayyuka daban-daban. Babban allon LCD mai layin 4
yana ba da karatun kai tsaye na aikin motsa jiki da matsayi na abubuwan shigarwa
da fitarwa.
Kulawa
Duba mai sarrafawa akai-akai don kowane alamun lalacewa ko lalacewa.
A kiyaye umarnin saitin don tunani na gaba. Ga kowane
kulawa ko buƙatun sabis, tuntuɓi horar da fasaha
ma'aikata.
FAQ
Tambaya: Waɗanne matakan tsaro zan ɗauka lokacin amfani da sau biyu
& Mai Kula da Ƙofar Ƙofa ɗaya?
A: Koyaushe tabbatar da cewa an yi duk shigarwa ta hanyar horarwa
ma'aikatan fasaha. Bi duk gargaɗin aminci da aka bayar a cikin
manual don hana raunuka ko lalacewar dukiya.
Tambaya: Zan iya shigar da na'urorin aminci tare da mai sarrafawa?
A: Ee, Elsema Pty Ltd yana ba da shawarar shigar da na'urorin aminci irin su
as Photo Electric bim da aminci gefen firikwensin akan masu buɗewa ta atomatik
don ƙarin aminci.
Tambaya: Menene Eclipse Operating System (EOS) da aka ambata a cikin
bayanin samfurin?
A: The Eclipse Operating System ne mai amfani-mai amfani menu-kore
tsarin da ke sauƙaƙe sarrafawa, saiti, da aiki na atomatik
ƙofofi, kofofi, da shinge ta amfani da maɓallin taɓawa 1.
"'
Mai Kula da Ƙofa Biyu & Guda Daya
tare da Eclipse® Operating System (EOS)
Bugu na 9
Eclipse® MC
www.elsema.com
MC: Mai Kula da Ƙofofin Biyu da Single
Saita da Bayanin Fasaha
Ya haɗa da Fasaha ta Fasaha ta zamani
Muhimmiyar gargaɗi da umarnin aminci
Duk shigarwa da gwaji dole ne a yi kawai bayan karantawa da fahimtar duk umarnin a hankali. Duk wayoyi ya kamata a yi su ta hanyar kwararrun ma'aikatan fasaha kawai. Rashin bin umarni da gargaɗin aminci na iya haifar da mummunan rauni da/ko lalata dukiya.
Elsema Pty Ltd ba zai ɗauki alhakin kowane rauni, lalacewa, farashi, kuɗi, kuɗi ko kowane da'awar kowane mutum ko kadara wanda zai iya haifar da rashin amfani ko shigar da wannan samfur.
Hadarin cikin kayan da aka siya sai dai in an yarda a rubuce a rubuce zuwa ga mai siye bayan isar da kayan.
Duk wani adadi ko ƙididdiga da aka bayar don aiwatar da kaya sun dogara ne akan ƙwarewar kamfani kuma shine abin da kamfani ke samu akan gwaje-gwaje. Kamfanin ba zai karɓi alhaki don gazawar bin alkalumman ko ƙididdiga ba saboda yanayin yanayi masu canji da suka shafi tsohonampda Remote Controls.
Elsema Pty Ltd yana ba da shawarar cewa an shigar da na'urorin aminci kamar Photo Electric beam da firikwensin gefen aminci akan masu buɗewa ta atomatik.
Da fatan za a kiyaye wannan umarnin saitin don tunani na gaba.
An shigar dashi: ______________________________________
Kwanan sabis: _____________________________________________
2
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
Abubuwan da ke ciki
Siffofin………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… …………………………………………………………………………………………………………………………………………… Ayyuka …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………… Delay ……………………………………………………………………………………………4 Menu 4 Motor 5 Obstruction ……………………………………………………………………………..6 Menu 8 Motor 9 Obstruction ……………………………………………………………………………10 Menu 11 Motor Speed, Slow Speed Area and Reverse Time……………………………………1 Menu 12 Anti-Jam and Braking …………………………………………………………………………2 Menu 13 i-Learning ………………………………………………………………………………………….3 Menu 14 Password …………………………………………………………………………………………..4 Menu 15 Operational Records…………………………………………………………………………….5 Menu 16 Tools…………………………………………………………………………………………………6 Troubleshooting guide …………………………………………………………………………………………19 Accessories …………………………………………………………………………………………………………………………………………………………………………………………………………
www.elsema.com
3
Siffofin
Ya dace da ƙofofin juyawa da ƙofofin zamewa> Ayyukan Mota sau biyu ko ɗaya> Tsarin Tsarin Eclipse (EOS)> Firikwensin dare da dare (DNS)> 24 ko 12 Volt DC Motar Mota> Farawa mai laushi da tasha mai laushi> Saurin da daidaita ƙarfi
da umarnin saitin> Ikon taɓawa 1 don sauƙin saiti> Bayanan martaba ta atomatik ta amfani da sabon fasaha
fasaha > Abubuwan shigarwa iri-iri, maɓallin turawa, buɗe kawai, rufe
kawai, tsayawa, mai tafiya a ƙasa da Hasken Wutar Lantarki
Bayani
> Yana goyan bayan ƙayyadaddun shigarwar sauyawa ko tashoshi na inji
> Daidaitacce Kullewa ta atomatik, lodin toshewa da samun mai tafiya a ƙasa
Makullin daidaitacce da fitarwar haske mai ladabi
na'urorin haɗi
> Lissafin sabis, kariyar kalmar sirri, yanayin hutu da ƙari masu yawa
> Gina a cikin caja baturi 12 da 24 Volt don madadin batura
> Ƙarƙashin halin yanzu na jiran aiki yana sa ya dace don ƙofofin hasken rana
Shin kun shirya don Kusufin? Tsarin Eclipse na MC tsarin tsarin menu ne na abokantaka wanda ke amfani da maɓallin taɓawa 1 don sarrafawa, saitawa da gudanar da ƙofofin atomatik, kofofi da shinge. Yana amfani da babban allon LCD mai layi 4 yana nuna karatun kai tsaye na aikin motar da matsayi na duk abubuwan shigarwa da abubuwan fitarwa.
Mai kula da MC ba tsararraki na gaba bane kawai amma mai canza wasan masana'antu. Mun so mu ƙirƙiri mai sarrafawa mai sauƙi don amfani kuma yana yin kusan duk wani fasalin da ake buƙata a masana'antar ƙofar da ƙofar. MC ba tsara na gaba ba ne kawai amma "Tsarin Canji na gaba" a cikin masana'antar ƙofa da ƙofar da ke haifar da Eclipse akan masu kula da motoci da aka haɓaka a baya.
Wannan sabon mai sarrafa motar mai hankali shine mafi kyawun wasa don ƙofar ku ta atomatik ko injin kofa.
An gina mai kula da hankali daga ƙasa zuwa sama, bisa ga ra'ayin abokin ciniki da kuma amfani da fasahar zamani. Tare da wadatattun ayyukan sa, farashin abokan ciniki na mabukaci kuma tare da mai da hankali yayin haɓaka kasancewa sauƙin amfani da saiti ya sa wannan mai sarrafa ya zama babban jirgi don sarrafa injin ku.
Zaɓuɓɓuka masu sauƙi na Elsema don ƙara masu sarrafa nesa ko kowane nau'in Kayan Wuta na Photoelectric suna yin kyakkyawan tsarin abokantaka na mai amfani, yayin da guje wa tsarin kulle-kulle ga kayan haɗi.
Ana samun katunan sarrafawa tare da wani shinge mai ƙima na filastik IP66 don shigarwa na waje, batura masu ajiya tare da caja ko katin kawai. Hakanan MC ya dace da ƙofofin hasken rana tare da ƙarancin jiran aiki sosai.
4
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
MC
Saukewa: MC24E2
MC24 ko MC12E
Solar24SP ko Solar12
Lambar Sashe:
Bangaren No.
Abubuwan da ke ciki
Bangaren No.
Abubuwan da ke ciki
MC
Ƙofa biyu ko ɗaya da mai kula da kofa don 24/12 Volt motor har zuwa 120 Watts
MCv2*
Ƙofa biyu ko ɗaya da mai kula da kofa don 24/12 Volt motor wanda ya fi 120 Watts*
Saukewa: MC24E
Mai sarrafawa sau biyu ko ɗaya don injinan Volt 24 ya haɗa da IP66 da aka ƙididdige shingen filastik da mai canzawa
Saukewa: MC12E
Mai sarrafawa sau biyu ko ɗaya don injinan Volt 12 ya haɗa da IP66 da aka ƙididdige shingen filastik da mai canzawa
MC24E2 Daidai da MC24E da 24 Volt 2.3Ah madadin baturi
MC24E7 Daidai da MC24E da 24 Volt 7.0Ah madadin baturi MC12E7 Daidai da MC12E da 12 Volt 7.0Ah madadin baturi
Solar Gates
Kayan aikin hasken rana don ƙofofi biyu ko guda ɗaya, sun haɗa da caja Solar24SP MPPT caja & 24 Volt 15.0Ah madadin baturi da
40W Solar panel.
Solar12
Kayan aikin hasken rana don ƙofofi biyu ko guda ɗaya, sun haɗa da caja MPPT na hasken rana & 12 Volt 15.0Ah madadin baturi
* Sama da Watts 120 suna amfani da MCv2. Tuntuɓi Elsema don shawarwarin saituna.
Ana iya amfani da katin sarrafawa na MC & MCv2 don sarrafa ƙofofin atomatik, kofofi, ƙofofin albarku, tagogi masu sarrafa kansu & louvres.
www.elsema.com
5
Tsarin Jeri
Latsa Sarrafa Jagora na daƙiƙa 2 don shigar da menu
BABBAN ALAMOMIN
1.0 Rufe atomatik
2.0 Samun Tafiya
3.0 Ayyukan shigarwa
4.0 PE Safety Beam Aiki
5.0 Ayyukan fitarwa
1.1 Lokacin Kulle atomatik
2.1 PA Lokacin Tafiya
3.1 PE Polarity
4.1 Tsaida & Buɗe akan Zagayen Rufe
5.1 Fitowar Relay 1
Kulle / Birki
Hasken ladabi
Kiran Sabis
Haske (Gargadi) Haske
Kulle Mai kunnawa
Bude Kofa
1.2 Lokacin AC tare da PE Trig
2.2 PA AC Lokacin
3.2 Iyakance Sw Polarity
PE Beam Yana Tsaya Motar akan Zagayowar Kusa
5.2 Fitowar Relay 2
Kulle / Birki
Hasken ladabi
Kiran Sabis
Haske (Gargadi) Haske
Bude Kofa
6.0 Hanyoyin fitarwa
7.0 Siffofin Musamman
8.0 Jinkirin ganye
9.0 Motar 1 Gano Tashi
10.0 Motar 2 Gano Tashi
11.0 Gudun Mota, Wurin Gudun Slow & Juya Lokaci
12.0 Anti-Jam/Birkin Lantarki
13.0 Tafiya Koyi
14.0 Kalmar wucewa
15.0 Rubutun Ayyuka
16.0 Kayan aiki
6.1 Kulle Fitarwa
7.1 RC Buɗe kawai
8.1 Buɗe Bakin Leaf
9.1 M1 Buɗe Kaya
10.1 M2 Buɗe Kaya
11.1 Buɗe Gudun (%)
12.1 M1 Buɗe Anti-Jam
6.2 Fitowar Haske
7.2 Yanayin Hutu
8.2 Rufe Bakin Leaf
9.2 M1 Rufewa
10.2 M2 Rufewa
11.2 Gudun Kusa (%)
12.2 M1 Rufe Anti-Jam
14.1 Shigar da kalmar wucewa
15.1 Tarihin Tarihi
16.1 No. na Motoci 1/2
14.2 Share Kalmar wucewa
15.2 Nuni Ayyuka / Currents
16.2 Taimako Voltage
FITAR DA SHIRI
6
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
1.3 AC Bayan Buɗe Kaya
2.3 PA AC Lokaci tare da PE Trig
3.3 Dakatar da Input Polarity
PE Beam Yana Tsaya Motar akan Buɗe & Rufe Zagaye
5.3 FITA
1.4 AC Bayan An dawo da Wutar Lantarki
2.4 PA AC akan Seq. Hana
3.4 Input na taimako
PE Beam Yana Tsaya Motar kuma Yana Rufe Ƙofar akan Buɗe Zagaye
1.5 AC akan Seq. Hana
2.5 PA Riƙe Ƙofar
3.5 FITA
4.2 FITA
6.3 Haske (Gargadi) Haske
7.3 Ajiye Makamashi
8.3 Rufe Jinkirin Ganyayyaki a Tsakiyar Buɗe
9.3 M1 Slow Gudun Toshewa
10.3 M2 Slow Gudun Toshewa
11.3 Slow Gudun (%)
12.3 M2 Buɗe Anti-Jam
6.4 Kiran Sabis
7.4 Tsaya/Buɗe ta atomatik akan Rufewa
8.4 FITA
9.4 M1 Takaddama Batun Amsa
10.4 M2 Takaddama Batun Amsa
11.4 Buɗe Wurin Gudun Slow
12.4 M2 Rufe Anti-Jam
6.5 Kulle Mai kunnawa
7.5 Tashar Mai karɓa 2 Zaɓuɓɓuka
9.5 FITA 10.5 FITA 11.5 Kusa da Wurin Saurin Kusa 12.5 Birki na Lantarki
14.3 FITA
15.3 Sake saitin Maxaukar Rikodi na Yanzu
16.3 Sake saita Tsohuwar Ma'aikatar
15.4 FITA
16.4 Abubuwan Gwaji
16.5 Lokacin Tafiya don Motocin Slip
1.6 AC kawai Lokacin Buɗe Cikakke
2.6 FITA
6.6 FITA 7.6 Latsa ka riƙe, Buɗe shigarwa
11.6 Tsaida Lokacin Jinkirin Rev
12.6 Buɗe Ayyukan Hana
16.6 Yanayin Ƙofar Solar
1.7 AC kawai da dare
1.8 FITA
7.13 FITA 7.12 Tsayawa Juya na ɗan lokaci 7.11 Latsa ka Riƙe, Ch2 7.10 Mai Nesa Latsa ka riƙe, Ch1 7.9 Mai Nisa Load da iska 7.8 Taga / Louvre Yanayin 7.7 Latsa ka Riƙe, Rufe shigarwar.
11.7 FITA 12.7 Aikin Rufewa 12.8 FITA
16.7 Nau'in Fuse: 10 ko 15 Amps
16.10 FITA
16.9 Slow Speed Ramp Kasa
16.8 Rana / Dare Hankali
www.elsema.com
7
Tsarin Haɗin Haɗin MC
140mm ku
Sensor Day da Dare
ACSNuSpply
Karfafa Ta
Eclipse tsarin aiki
Mai karɓa
16
15
14
13
12
11
10
9
Shirin 2
1
2
3
4
5
6
7
8
Shirin 1
Jagora Mai Kula
ELSEMA Buɗe Tasha Kusa
LED
Eriya
Gina mai karɓa
+
Fitowa 2 C
Farashin 2NC
Fitowa 2 NO
Fitar wutar lantarki
130mm ku
Fuse
Relay Relay
AACCSSuppplplyy AACCSSuppplplyy AMCoStuoprpl1y AMCoStuoprpl1y AMCoStuoprpl2y AMCoStuoprpl2y ABCatStueprpyly+ ABCatStueprpyly-
Mota 1 Buɗe Iyaka
Motoci 1 Rufe Iyakar gama gari
Mota 2 Buɗe Iyaka
Motoci 2 Rufe Maɓallin Turawa Iyaka
Buɗe Rufe Tsayawa Na kowa PED Access
Hoto na hoto
+ 12 VDC - 12 VDC Fitar 1 C
Fitowa 1 NO
Mai amfani Rufe ta al'ada na iya canzawa
Yawanci Buɗe Mai amfani na Rufe na al'ada zai iya canza mai amfani zai iya canzawa
An ƙididdige fitarwa a 250mA
Haɗin DNS : A saman kusurwar dama na katin sarrafawa akwai haɗin kai don Sensor Rana da Dare (DNS). Ana samun wannan firikwensin daga Elsema kuma ana amfani dashi don gano hasken rana. Ana iya amfani da wannan fasalin don Rufe kofa ta atomatik da daddare, kunna hasken ladabi ko fitilu a kan ƙofofin ku a cikin dare da ƙari da yawa waɗanda ke buƙatar gano rana da dare.
8
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
Wutar Lantarki - Samfura, Motoci, Baturi da Abubuwan Shiga
Koyaushe kashe wuta kafin yin kowace waya.
Tabbatar cewa an gama duk wayoyi kuma an haɗa motar zuwa katin sarrafawa. Tsawon igiyar waya da aka ba da shawarar yakamata ya zama mm 12 don duk haɗin kai zuwa filogi a cikin tubalan tasha.
Hoton da ke ƙasa yana nuna wadata, injina, madadin baturi da abubuwan da ake samu da kuma saitunan masana'anta don kowace shigarwa.
Fuse
Samfuran AC: 24/12 Volts AC Model: MC
ELSEMA AUSTRALIA ce ta tsara
Buɗe Kusa Tasha LED
Relay
AACC Suuppplyy AACC Suuppplyy AMCoStuoprpl1y AMCoStuoprpl1y AMCoStuoprpl2y AMCoStuoprpl2y AMCoStuoprpl1y ABCatStueprpyly+ ABCatStueprpylyMotor 1 Buɗe Iyakar Mota 2 Rufe Iyakar Motar gama gari 2 Buɗe Iyakar Motar Buɗewa XNUMX Clop Haske
12 ko 24 Volts AC Supply
M
Motoci 1
M
Motoci 2
Mai amfani Rufe ta al'ada na iya canzawa
Yawanci Buɗe Mai amfani na iya canzawa
Mai amfani Rufe ta al'ada na iya canzawa
Idan kana amfani da tasha na inji matsawa zuwa Saita i-Learning Matakan. Tsallake sashin Canjawa iyaka. Idan kana amfani da maɓallan iyaka ka tabbata an haɗa su da kyau. Katin sarrafawa zai iya aiki tare da ko dai madaidaicin madaidaicin da aka haɗa kai tsaye zuwa tubalan tashoshi na katunan ko a jeri tare da motar.
www.elsema.com
9
Kafin Saita:
Ana iya shigar da katin sarrafa MC a cikin saitin shigarwa iri-iri. A ƙasa akwai saitin gama gari guda 3. Yana da matukar mahimmanci don zaɓar nau'in saitin daidai lokacin i-Learn. 1. Babu iyaka sauyawa. A cikin wannan saitin, katin yana dogara ne akan zane na yanzu na motar don ƙayyade cikakkun wuraren buɗewa da cikakkun rufaffiyar matsayi. Kuna buƙatar daidaita iyakokin ku daidai don samun cikakkiyar buɗewa da rufe ƙofar. Saita tafki mai tsayi da yawa na iya sa motar ta tsaya a buɗe ko a rufe. (Duba jagorar warware matsala). 2. Iyakance masu juyawa da aka haɗa zuwa katin sarrafawa. Maɓallin ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙa'ida na iya zama Rufewa (NC) ko Buɗewa Kullum (NO). Kuna buƙatar zaɓar nau'in daidai lokacin i-Learn. A cikin wannan saitin iyakar maɓallai ana haɗa su kai tsaye zuwa katin sarrafawa. 2. Iyakance masu juyawa a jere tare da motar. Ana haɗa madaidaicin madaidaicin jeri tare da motar. Maɓallin iyaka zai cire haɗin wuta zuwa motar lokacin da aka kunna.
Saita Matakan Koyo:
1. Dubi LCD kuma bi umarnin da aka nuna. 2. Za a iya katse saitin i-Learning koyaushe tare da maɓallin tsayawa ko ta danna Jagora
Ƙofar sarrafawa. 3. Shigar da Menu 13 don fara i-Learning ko sabbin katunan sarrafawa za su sa ka yi ta atomatik
i-ilimin. 4. Katin sarrafawa zai buɗe kuma ya rufe ƙofofi ko ƙofofi sau da yawa don koyon kaya da tafiya
nisa. Wannan ita ce bayanin martaba ta atomatik ta amfani da sabuwar fasahar fasaha. 5. Buzzer zai nuna koyo yayi nasara. Idan babu buzzer duba duk wayoyin lantarki
gami da samar da wutar lantarki sai ka koma mataki na 1. 6. Idan ka ji buzzer bayan i-Learn, kofa ko kofa tana shirye don amfani.
10
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
Iyakance Sauyawa
Idan kana amfani da maɓallan iyaka ka tabbata an haɗa su da kyau. Katin sarrafawa na iya aiki tare da ko dai madaidaicin madaidaicin da aka haɗa kai tsaye zuwa tubalan tashoshi na katunan ko a jeri tare da motar. Duba zanen da ke ƙasa:
Fuse
Samfuran AC: 24/12 Volts AC Model: MC
ELSEMA AUSTRALIA ce ta tsara
Iyakance sauyawa da aka haɗa kai tsaye zuwa katin sarrafawa
AMCoStuoprpl1y AMCoStuoprpl1y AMCoStuoprpl2y AMCoStuoprpl2y Motar 1 Buɗe Iyakar Mota 1 Rufe Iyakar Motar gama gari 2 Buɗe Iyakar Motar 2 Ƙirar Ƙarfi
M
Motoci 1
M
Motoci 2
Mai amfani Rufe ta al'ada na iya canzawa
Fuse
Samfuran AC: 24/12 Volts AC Model: MC
ELSEMA AUSTRALIA ce ta tsara
Iyakance sauyawa a jeri tare da mota
AMCoStuoprpl1y AMCoStuoprpl1y AMCoStuoprpl2y AMCoStuoprpl2y
Bude Iyaka
Rufe Iyaka
Diode*
Diode*
M
Bude Iyaka
Rufe Iyaka
Diode*
Diode*
M
* 6 Amps, 50V ko mafi kyawun diode Elsema: Diode FR604
Ta hanyar tsohuwa ana rufe abubuwan shigar da ke canzawa akan katin sarrafawa kullum (NC). Ana iya canza wannan zuwa buɗewa kullum (NO) yayin matakan saiti.
www.elsema.com
11
Menu 1 Rufe atomatik
Siffar Rufewa ta atomatik tana rufe ƙofar ta atomatik bayan an ƙidaya lokacin da aka saita zuwa sifili. Katin sarrafawa yana da na al'ada Kulle Auto da yawa na musamman na Rufewar atomatik kowanne yana da nasa ƙidayar ƙidaya.
Elsema Pty Ltd yana ba da shawarar Ƙaƙwalwar Hoto don haɗawa da katin sarrafawa lokacin da aka yi amfani da kowane zaɓi na Kusa Auto.
Idan shigarwar Tsaida ta kunna Auto Close an kashe don wannan zagayowar kawai.
Maɓallin Rufe atomatik ba zai ƙirgawa ba idan Maɓallin Tura, Buɗewa ko shigarwar Lantarki na Photoelectric yana aiki.
Menu Ba.
Siffofin Rufe atomatik
Tsohuwar masana'anta
Daidaitacce
1.1
Rufe atomatik na al'ada
Kashe
1 - 600 seconds
1.2
Rufewa ta atomatik tare da Tasirin Hoto
Kashe
1 - 60 seconds
1.3
Rufewa ta atomatik bayan Buɗewar toshewa
Kashe
1 - 60 seconds
1.4
Rufe atomatik bayan An dawo da Wuta
1.5
Matsakaicin Matsakaicin Kulle Auto akan Hanyoyi masu zuwa
1.6
Rufe atomatik Lokacin Buɗe cikakke
Kashe
1 - 60 seconds
2
Min = Kashe, Max = 5
Kashe
Kashewa / Kunnawa
1.7
Rufe atomatik da dare kawai tare da haɗin DNS
Kashe
Kashewa / Kunnawa
1.8
Fita
1.1 Rufe atomatik na al'ada Ƙofar za ta rufe bayan wannan mai ƙidayar lokaci ya ƙidaya zuwa sifili.
1.2 Rufe Kai tsaye tare da Tasirin Hoto Wannan Kullewar atomatik yana farawa ƙirgawa da zaran an share Fitar da Wutar Lantarki bayan faɗakarwa ko da ƙofar ba ta cika buɗewa ba. Idan babu Photoelectric Beam jawo ƙofar ba za ta Rufe Kai tsaye ba.
1.3 Rufewa ta atomatik bayan Buɗaɗɗen toshewa Idan ƙofar ta buɗe kuma ta sami toshewa kullum ƙofar za ta tsaya ta ci gaba da kasancewa a wannan matsayi. Idan wannan fasalin ya kunna toshewa zai fara ƙirgawar mai ƙidayar lokaci kuma a sifili zai rufe ƙofar.
12
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
1.4 Rufe atomatik Bayan An Maido da Wutar Lantarki Idan ƙofar tana buɗe a kowane wuri kuma akwai gazawar wutar lantarki, lokacin da aka sake haɗa wutar lantarki ƙofar za ta rufe da wannan mai ƙidayar lokaci.
1.5 Matsakaicin Rufe Mota na Al'ada akan Hanyoyi na Jeri Idan an saita na al'ada Kulle Auto kuma yayin rufewa akwai toshewa, ƙofar zata tsaya kuma ta sake buɗewa. Wannan saitin yana saita adadin lokutan da ƙofar za ta yi ƙoƙarin Rufewa ta atomatik. Bayan ƙoƙarin saita iyaka ƙofar za ta kasance a buɗe.
1.6 Rufe atomatik Idan an Buɗe Cikakkiyar Lokaci Mai ƙidayar Kuɗi ta atomatik ba zai ƙare ba sai dai idan an buɗe ƙofar gabaɗaya.
1.7 Rufe atomatik da Dare Lokacin da aka haɗa DNS kuma an saita hankali (Menu 16.8) daidai, Rufe Auto zai yi aiki da dare kawai.
Menu 2 Samun Tafiya
Akwai nau'ikan hanyoyin shiga masu tafiya a ƙasa da yawa. Shigar da Ƙafafun ƙafa yana buɗe ƙofar na ɗan gajeren lokaci don ba da damar wani ya bi ta ƙofar amma baya ba da izinin shiga abin hawa.
Elsema Pty Ltd yana ba da shawarar Haɗin Hoto na Hoto zuwa katin sarrafawa lokacin da aka yi amfani da kowane zaɓi na Kusa Auto.
Menu Ba.
Fasalolin Samun Tafiya
Tsohuwar masana'anta
Daidaitacce
2.1
Lokacin Balaguron Tafiya
3 seconds
3 - 20 seconds
2.2
Lokacin Kusa da Mai Tafiya ta atomatik
Kashe
1 - 60 seconds
2.3
Samun Samun Masu Tafiya ta atomatik Lokacin Rufewa ta atomatik tare da fararwa PE
Kashe
1 - 60 seconds
2.4
Samun Masu Tafiya Akan Rufe Motoci akan Hanyoyi masu Tsari
2
Min = Kashe, Max = 5
2.5
Samun Masu Tafiya tare da Ƙofar Riƙe
Kashe
Kashewa / Kunnawa
2.6
Fita
www.elsema.com
13
2.1 Lokacin Balaguro na Masu Tafiya Wannan yana saita lokacin buɗe ƙofa lokacin da aka kunna shigar da Masu Tafiya.
2.2 Lokacin Kusa Masu Tafiya ta atomatik Wannan yana saita ƙidayar ƙidayar don rufe ƙofar ta atomatik lokacin shigar da shigar da Masu Tafiya.
2.3 Lokacin Kusa da Masu Tafiya ta atomatik tare da PE Trigger Wannan Rufewa ta atomatik yana farawa ƙirgawa da zaran an share Fitar da Wutar Lantarki bayan an kunna wuta, lokacin da ƙofar ke cikin Matsayin Samun Tafiya. Idan babu Photoelectric Beam kunna kofa za ta kasance a cikin Matsayin Samun Tafiya.
2.4 Hannun Masu Tafiya Ta Hanyar Rufe Kan Hannun Hannun Tafiya Idan An saita Ƙofar Tafiya ta Ƙofar Tafiya kuma Ƙofar ta rufe kan wani abu ƙofar za ta tsaya kuma ta sake buɗewa. Wannan saitin yana saita adadin lokutan da ƙofar za ta yi ƙoƙarin Rufewa ta atomatik. Bayan ƙoƙarin saita iyaka ƙofar za ta kasance a buɗe.
2.5 Samun Ƙofar Tafiya Tare da Ƙofar Riƙe Idan Ƙofar Riƙe Ƙofar Tafiya ta Kunna kuma an kunna shigar da Masu Tafiya zuwa dindindin ƙofar za ta ci gaba da kasancewa a buɗe a wurin Samun Tafiya. Buɗe shigarwar, Rufe shigarwar, shigarwar Button dannawa da kuma abubuwan sarrafawa suna kashewa. Ana amfani dashi a aikace-aikacen Fitar Wuta.
Menu 3 Ayyukan shigarwa
Wannan yana ba ku damar canza Polarity of Photoelectric Beam, tsayawa da iyakance abubuwan shigarwa.
Menu Ba.
Ayyukan shigarwa
Tsohuwar masana'anta
Daidaitacce
3.1
Photoelectric Beam Polarity
3.2
Iyakance Polarity Canjawa
3.3
Dakatar da Input Polarity
3.4* Input ɗin Taimako (M2 Buɗe Iyaka Tashar)
Yawanci An rufe Akan rufe Kullum Buɗewa
An kashe
Kullum Rufe/Buɗewa Kullum
Kullum Rufe/Buɗewa Kullum
Yawanci Buɗe / Akan rufe
Kashe / Tsagewar Ciwon Tsaro
3.5
Fita
* 3.4: Wannan zaɓin yana samuwa ne kawai idan aka yi amfani da shi don yanayin kofa ɗaya Mota 2 Buɗaɗɗen iyaka za a iya amfani da ita don yin waya da tsiri na aminci na Elsema akan aikace-aikacen kofa guda ɗaya. Ayyukansa iri ɗaya ne da an saita shi a menu na 12.7.
14
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
Menu 4 Hoton Wutar Lantarki
Hoton Hoton Hoto ko firikwensin na'urar tsaro ce wacce aka sanya a fadin kofar kuma lokacin da aka toshe katako yana dakatar da kofa mai motsi. Ana iya zaɓar aiki bayan tsayawar ƙofar a cikin wannan menu.
Menu Ba.
Featuren Hasken Hoto
Tsohuwar masana'anta
4.1
Photoelectric Beam
PE Beam yana tsayawa kuma yana buɗe ƙofar akan zagaye na kusa
4.2
Fita
Daidaitacce
PE Beam yana tsayawa kuma yana buɗe ƙofar akan zagaye na kusa
------------------- Biyyaci Biyayi ya tsaya ƙofar a kusa
----------------------------------- PE BELLA KYAUTA KYAUTA KYAUTA & KYAUTATA
————————————–PE Beam yana tsayawa da rufe ƙofar akan buɗaɗɗen zagayowar
Tsohuwar masana'anta don shigarwar katako na PE "a koyaushe yana rufe" amma ana iya canza wannan zuwa buɗewa kullum a menu na 3.
Elsema Pty Ltd yana ba da shawarar Ƙaƙwalwar Hoto don haɗawa da katin sarrafawa lokacin da aka yi amfani da kowane zaɓi na Kusa Auto.
Elsema tana siyar da nau'ikan Biams na Photoelectric daban-daban. Muna adana Retro-Reflective da Ta hanyar Beam Photoelectric Beams.
Farashin PE1500
(Nau'in Tunani na Retro)
www.elsema.com
Farashin PE24
(Ta nau'in katako)
15
Menu 5 Ayyukan Fitar da Ayyuka
Katin sarrafawa yana da abubuwan fitarwa guda biyu, Fitowa 1 da Fitowa 2. Mai amfani zai iya canza aikin waɗannan abubuwan don kulle / birki, hasken ladabi, kiran sabis, strobe (Gargadi) haske, mai kunnawa kulle ko buɗe kofa (ƙofa ba ta cika rufewa ba. ) nuna alama.
Fitowa 1 voltage kyauta gudun ba da sanda fitarwa tare da gama gari da kuma kullum bude lambobin sadarwa. Tsohuwar masana'anta shine aikin saki / birki.
Fitowa 2 voltage kyauta gudun ba da sanda fitarwa tare da gama gari, kullum bude da kuma kullum rufaffiyar lambobi. Tsoffin masana'anta aikin haske ne na ladabi.
Menu Ba.
Ayyukan fitarwa na Relay
Tsohuwar masana'anta
5.1
Fitowar Relay 1
Kulle / Birki
Daidaitacce
Kulle / Birki ————————————
Hasken Ladabi ————————————
Kiran Sabis ————————————
Haske (Gargadi) Haske —————————————
Kulle Mai kunnawa ————————————
Bude kofar
5.2
Fitowar Relay 2
Hasken ladabi
Kulle / Birki ————————————
Hasken Ladabi ————————————
Kiran Sabis ————————————
Haske (Gargadi) Haske —————————————
Bude Kofa
5.3
Fita
16
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
Kulle / Fitar Birki
Tsoffin masana'anta don fitarwa na 1 shine kullewa/saki birki. Fitowa 1 voltagLambobin sadarwa na e-free relay tare da gama gari da lambobi masu buɗewa. Samun shi voltage-free yana ba ku damar haɗa ko dai 12VDC/AC, 24VDC/AC ko 240VAC zuwa gama gari. Alamar buɗewa ta al'ada tana tuƙi na'urar. Dubi zane a kasa:
Relay
Buɗe Tasha Kusa
Relay
Fitowa 1 C Fitowa 1 NO
Wutar + Kayan aiki -
+ idan DC - idan DC
Kulle/Birki
Kulle ko haɗin birki
+
Fitowa 2 C
Farashin 2NC
Fitowa 2 NO
Relay
Buɗe Tasha Kusa
Relay
+ Ƙarfi - Ƙarfafawa
Maglock
Fitowa 1 C Fitowa 1 NO
Haɗin kulle Magnetic
Yi amfani da fitarwa 2
Hasken ladabi
Tsoffin masana'anta don hasken ladabi yana kan fitarwa 2. Fitowa na 2 shine voltagLambobin sadarwa na e-free relay tare da na gama-gari, na yau da kullun buɗewa da rufaffiyar lambobi. Samun shi voltage-free yana ba ka damar haɗa ko dai 12VDC/AC, 24VDC/AC ko 240VAC wadata ga gama gari. Buɗewar lamba ta al'ada tana jan haske. Duba zane a shafi na gaba.
Fitowar Kiran Sabis
Ana iya canza ko dai fitarwa 1 ko fitarwa 2 zuwa alamar kiran sabis. Wannan zai haifar da fitarwa lokacin da aka kai ga ma'aunin sabis na software. Ana amfani da shi don faɗakar da masu sakawa ko masu shi lokacin da sabis ɗin ya ƙare don ƙofar. Yin amfani da mai karɓar GSM na Elsema yana ba masu sakawa ko masu shi damar samun saƙon SMS & kiran waya lokacin da sabis ɗin ya ƙare.
www.elsema.com
17
R mai karɓa
Jagora Mai Kula
+
Fitowa 2 C
Farashin 2NC
Fitowa 2 NO
Relay
Fitar da DC ba a tace ba
Fitarwa voltage ya dogara da wadata voltage
+
Tushen wutan lantarki
12VAC/DC 24VAC/DC ko 240VAC wadata Ya dogara da haske
Haske (Gargadi) Haske lokacin Buɗewa ko Rufewa
Ana kunna fitarwar relay a duk lokacin da ƙofar ke aiki. Tsohuwar masana'anta a kashe. Ko dai fitarwa 1 ko fitarwa na 2 za a iya canza shi zuwa haske na strobe (Gargadi). Duk abubuwan da aka fitar na relay voltage-free lambobin sadarwa. Samun shi voltage-free yana ba ku damar haɗa ko dai 12VDC/AC, 24VDC/AC ko 240VAC wadata ga gama gari don kunna hasken strobe. Sannan lambar sadarwar da aka saba buɗe tana jan haske. Dubi zane a sama.
Kulle Mai kunnawa
Yanayin kunnawa na kulle yana amfani da duka fitarwa na relay 1 da fitarwa na relay 2. Ana amfani da abubuwan guda 2 don canza polarity na mai kunna kulle don kulle da buɗewa yayin buɗewa da sake zagayowar rufewa. A lokacin da aka fara buɗe fitarwa 1 shine "ON" kuma yayin fitowar-kusa-kusa 2 shine "ON". Pre-bude da lokutan rufewa ana iya daidaita su.
Bude Kofa
Ana kunna fitarwar relay a duk lokacin da ƙofar ba ta cika rufewa ba. Tsohuwar masana'anta a kashe. Ko dai fitarwa 1 ko fitarwa 2 ana iya canza shi zuwa gate a buɗe.
18
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
Menu 6 Yanayin Fitowar Relay
Menu 6.1 Kulle / Birki
Ana iya daidaita fitar da fitarwa a yanayin kulle/birke ta hanyoyi daban-daban.
Menu Ba.
Yanayin Kulle / Birki
6.1.1
Buɗe Kulle / Kunna Birki
6.1.2
Kulle Kulle / Kunna Birki
Tsoffin masana'anta 2 seconds
Kashe
Daidaitacce
1 30 seconds ko riƙe
1 30 seconds ko riƙe
6.1.3
Buɗe Pre-Lock/ Kunna Birki
Kashe
1 30 seconds
6.1.4
Rufe Pre-Lock/ Kunna Birki
Kashe
1 30 seconds
6.1.5
Sauke Kulle
Kashe
Kashewa / Kunnawa
6.1.6
Fita
6.1.1 Buɗe Kulle / Kunna Birki Wannan yana saita lokacin da aka kunna fitarwa. Tsoffin masana'anta shine 2 seconds. Saita shi zuwa Riƙe yana nufin an kunna fitarwa don jimlar lokacin tafiya a buɗaɗɗen hanya.
6.1.2 Kulle Kulle / Kunna Birki Wannan yana saita lokacin da aka kunna fitarwa. An kashe tsohowar masana'anta. Saita shi zuwa Riƙe yana nufin an kunna fitarwa don jimlar lokacin tafiya a hanya kusa.
6.1.3 Buɗe Pre-Lock/ kunna birki Wannan yana saita lokacin da aka kunna fitarwa kafin motar ta fara a buɗaɗɗen hanya. Tsohuwar masana'anta a kashe.
6.1.4 Rufe Pre-Lock/ Kunna Birki Wannan yana saita lokacin da aka kunna fitarwa kafin motar ta fara a kusa. Tsohuwar masana'anta a kashe.
6.1.5 Kulle Kulle Wannan yanayin yakamata a kunna lokacin da aka yi amfani da makullin digo. Zai rike makullin idan an tsayar da ƙofofin a tsakiyar tafiyarsa.
www.elsema.com
19
Menu 6.2 Haske mai ladabi
Za'a iya daidaita fitarwar relay a cikin yanayin ladabi daga daƙiƙa 2 zuwa awanni 18. Wannan yana saita lokacin kunna hasken ladabi bayan ƙofar ya tsaya. Tsoffin masana'anta shine minti 1.
Menu Na 6.2.1
Yanayin Haske Mai ladabi Ladabi Kunna Haske
Tsohuwar masana'anta
Minti 1
Daidaitacce
2 seconds zuwa 18 hours
6.2.2
Hasken Ladabi a Dare Kawai tare da Haɗin Saƙon Rana da Dare
Kashe
Kashewa / Kunnawa
6.2.3
Fita
Menu 6.3 Strobe (Gargadi) Haske
Fitowar fitarwa a cikin strobe (Gargadi) hasken yana tsayawa "a kunne" yayin da ƙofar ke motsawa. Hakanan za'a iya saita wannan fitarwa don zuwa "kunna" kafin ƙofar ta fara motsawa.
Menu No. Strobe (Gargadi) Yanayin Haske
6.3.1
Kunna Hasken Pre-Open Strobe (Gargadi).
6.3.2
Kunna Hasken Ƙarfin Ƙarfafa Rufe (Gargadi)
Tsohuwar masana'anta
Kashe
Kashe
Daidaitacce 1 30 seconds 1 30 seconds
6.3.3
Fita
6.3.1 Kunna Hasken Ƙarfi Mai Buɗewa Wannan yana saita lokacin kunna hasken strobe kafin ƙofar ta yi aiki a buɗe. Tsohuwar masana'anta a kashe.
6.3.2 Kunna Hasken Ƙarfin Ƙarfi Mai Ƙarfi Wannan yana saita lokacin kunna hasken strobe kafin ƙofar ta yi aiki a kusa. Tsohuwar masana'anta a kashe.
20
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
Menu 6.4 Kiran Sabis
Wannan yana saita adadin cikakken zagayowar (buɗe da kusa) da ake buƙata kafin ginannen buzzer ya kunna. Hakanan za'a iya saita fitar da katin sarrafawa don kunnawa idan an kammala adadin zagayowar. Haɗa mai karɓar GSM na Elsema zuwa fitarwa yana bawa masu su damar samun kiran waya da saƙon SMS lokacin da sabis ɗin ya ƙare.
Lokacin da sakon "Sabis na Kira" ya bayyana akan LCD ana buƙatar kiran sabis. Bayan an gama sabis, bi saƙon akan LCD.
Menu Na 6.4.1
Ma'aunin Sabis na Yanayin Kira
Tsohuwar masana'anta
Kashe
Daidaitacce Min: 2000 zuwa Max: 50,000
6.4.2
Fita
Menu 6.5 Kulle Mai kunnawa
Lokacin da fitarwa na relay 1 ya kunna "kunna" kafin ƙofar ta fara buɗewa kuma lokacin da aka kunna relay 2 "bayan an rufe ƙofar gabaɗaya ana iya daidaita shi kamar ƙasa:
Menu Ba.
Kulle Mai kunnawa
Tsohuwar masana'anta
Daidaitacce
6.5.1
Kunna Kulle Pre-Buɗe
Kashe
1 30 seconds
6.5.2
Kunna Kulle Bayan-Rufe
Kashe
1 30 seconds
6.5.3
Fita
6.5.1 Kunna Kunnawa Pre-Buɗe Kulle Wannan yana saita lokacin da aka kunna relay 1 kafin ƙofar ta yi aiki a buɗaɗɗen hanya. Tsohuwar masana'anta a kashe.
6.5.2 Kunna Kunna Makullin Bayan-Rufe Wannan yana saita lokacin gudu 2 yana kunna bayan an rufe ƙofar gabaɗaya. Tsohuwar masana'anta a kashe.
www.elsema.com
21
Menu 7 Fasaloli na Musamman
Katin sarrafawa yana da fasali na musamman da yawa waɗanda za a iya keɓance su zuwa takamaiman aikace-aikacenku.
Menu Ba.
Siffofin Musamman
7.1
Ikon Nesa Buɗe Kawai
7.2
Yanayin Holiday
7.3
Yanayin Ajiye Harshe
7.4
Tsayawa ta atomatik & Buɗe akan Rufewa
7.5
Zabuka 2 Channel Mai karɓa
7.6
Danna ka Riƙe don Buɗe Shigarwa
7.7
Latsa ka Riƙe don Rufe shigarwar
7.8
Window / Louvre
7.9
Lodi da Iska
7.10
Latsa & Riƙe Tashoshi na Nisa 1 (Buɗe)
7.11
Latsa & Rike Tashoshi na Nisa 2 (Rufe)
7.12 Juya baya na ɗan lokaci akan Dakatar da shigarwa
7.13
Fita
Tsohuwar masana'anta
Kashe Akan Kashe Kashe Kashe Kashe
Daidaitacce
A kashe / A kashe / a kashe / a kashe / onfore / mai tafiya ƙasa-wuri / a kashe / a kashe / matsakaici / a kashe / a kashe / kan kashe / onff
7.1 Ikon Nesa Buɗe kawai
Ta hanyar tsoho mai sarrafa ramut yana bawa mai amfani damar buɗewa da rufe ƙofar. A wuraren shiga jama'a mai amfani yakamata ya iya buɗe ƙofar kuma kada ya damu da rufe ta. Yawancin lokaci ana amfani da Rufewa ta atomatik don rufe ƙofar. Wannan yanayin yana hana rufewa don sarrafa nesa.
7.2 Yanayin Holiday Wannan fasalin yana kashe duk masu sarrafa nesa.
7.3 Yanayin Ajiye Makamashi
Wannan yana sanya katin sarrafawa zuwa ƙananan yanayin jiran aiki wanda ke rage lissafin wutar lantarki yayin da yake ci gaba da aiki da ayyuka na yau da kullun.
7.4 Tsayawa ta atomatik & Buɗe akan Rufewa
Ta hanyar tsohuwa lokacin da gate ɗin ke rufe kuma an kunna maɓallin turawa ko remote control zai tsaya kai tsaye ya buɗe ƙofar. Lokacin da aka kashe wannan fasalin, ƙofar za ta tsaya kawai akan kunna maɓallin turawa ko ikon nesa. Za a kashe buɗewa ta atomatik.
7.5 Tashar Mai karɓa 2 Zaɓuɓɓuka
Ana iya tsara tashoshi na 2 masu karɓa don sarrafa haske mai kyau, samun hanyar tafiya ko ana iya amfani da shi don Kusa kawai.
22
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
7.6 & 7.7 Latsa ka riƙe don Buɗewa da Rufe Abubuwan shigarwa Idan wannan fasalin yana ANA dole mai amfani ya ci gaba da danna maɓallin buɗewa ko rufewa don ƙofar ta yi aiki.
7.8 Window ko Yanayin Louvre Wannan yanayin yana haɓaka katin sarrafawa don sarrafa windows ko louvres masu sarrafa kansa.
7.9 Loading Iska Kunna wannan yanayin don ƙofofin da aka shigar a yankin Babban Iska.
7.10 & 7.11 Danna ka Riƙe don Nesa Channel 1 (Buɗe) da Channel 2 (Close) Maɓallin tashar nesa 1 & 2 za a buƙaci a tsara su zuwa tashar karɓar tashar 1 & 2. Dole ne mai amfani ya danna kuma riƙe maɓallin nesa don buɗe ko rufe.
7.12 Juya baya na ɗan lokaci akan Dakatar da shigarwa
Lokacin da wannan fasalin ke kunne kuma idan an kunna shigarwar tasha, duka kofofin biyu za su tsaya su koma baya na 1 sec.
Menu 8 Jinkirin Ganyayyaki
Ana amfani da jinkirin ganye lokacin da ganyen ƙofa ɗaya za ta rufe a wuri mai juzu'i zuwa ga ganyen rufaffiyar farko. Wannan jinkirin ganyen na iya zama dole don ƙara-kan makullai na musamman. Katin sarrafawa yana da jinkirin ganye daban don buɗaɗɗe da kwatance.
Lokacin da ake amfani da katin sarrafawa tare da injin guda ɗaya yanayin jinkirin ganye yana kashe.
Menu Na 8.1
Jinkirta Ganya Bude Jinkiri
Tsohuwar masana'anta
3 seconds
Kashe Daidaitacce - 25 seconds
8.2
Rufe jinkirin ganye
3 seconds
Kashe - 25 seconds
8.3
Rufe Jinkirin Ganyen Kan Tsaya Tsaya
Kashe
Kashewa / Kunnawa
8.4
Fita
8.1 Buɗe Leaf Delay Motor 1 zai fara buɗewa da farko. Bayan jinkirin ganyen lokacin ya ƙare motor 2 zai fara buɗewa.
8.2 Close Leaf Delay Motor 2 zai fara rufewa da farko. Bayan jinkirin ganye ya ƙare motar 1 zai fara rufewa.
8.3 Rufe Jinkirin Ganyayyaki akan Tsaya Tsaya
Ta hanyar tsoho motor 1 koyaushe yana samun jinkiri lokacin rufewa ko da ƙofar ba ta cika buɗewa ba. Lokacin da aka kashe duka motar 1 da motar 2 za su fara rufewa a lokaci guda kawai lokacin da ba a buɗe cikakke ba.
www.elsema.com
23
Menu 9 Motoci 1 Gano Matsaloli
Wannan yana saita tazarar hankali na yanzu sama da yanayin gudu na yau da kullun don ƙetare ƙofa idan an sami toshewa. Za'a iya saita ɓangarorin toshewa daban-daban don buɗaɗɗe da shugabanci na kusa. Hakanan lokacin amsawa yana daidaitacce.
Matsakaicin iyaka zai ba da izinin matsawa mafi ƙanƙanta don ƙulla ƙofar idan ya ci wani abu. Matsakaicin iyaka zai ba da izinin babban adadin matsi da aka yi amfani da shi don tada ƙofar idan ya ci wani abu.
Menu Ba.
Motoci 1 Gano Matsaloli da Lokacin Amsa
Tsohuwar masana'anta
Daidaitacce
9.1
Buɗe Tashi Tashi
1 Amp
0.2-6.0 Amps
9.2
Rufe Tashi
9.3
Buɗe kuma Rufe Tazarar Hana Gudun Slow
9.4
Lokacin Gano Amsa Tashi
9.5
Fita
1 Amp 1 Amp Matsakaici
0.2-6.0 Amps
0.2-6.0 Amps
Mai sauri, Matsakaici, Sannu a hankali kuma Sannu sosai
Margin ExampMotar tana aiki a 2 Amps kuma an saita gefe zuwa 1.5 Amps, gano toshewar zai faru a 3.5 Amps (Gudun yau da kullun + Margin).
Don manyan saitunan gefe mai na'ura mai ba da wutar lantarki ya kamata ya zama babban isa don samar da babban abin halin yanzu.
Idan gate din ya buga abu a rufe zai tsaya kai tsaye sannan ya sake budewa. Idan gate ya buga abu akan buɗewa zai tsaya kai tsaye.
24
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
Menu 10 Motoci 2 Gano Matsaloli
Wannan yana saita tazarar hankali na yanzu sama da yanayin gudu na yau da kullun don ƙetare ƙofa idan an sami toshewa. Za'a iya saita ɓangarorin toshewa daban-daban don buɗaɗɗe da shugabanci na kusa. Hakanan lokacin amsawa yana daidaitacce.
Matsakaicin iyaka zai ba da izinin matsawa mafi ƙanƙanta don ƙulla ƙofar idan ya ci wani abu. Matsakaicin iyaka zai ba da izinin babban adadin matsi da aka yi amfani da shi don tada ƙofar idan ya ci wani abu.
Menu Ba.
Motoci 2 Gano Matsaloli da Lokacin Amsa
Tsohuwar masana'anta
Daidaitacce
10.1
Buɗe Tashi Tashi
1 Amp
0.2-6.0 Amps
10.2
Rufe Tashi
10.3
Buɗe kuma Rufe Tazarar Hana Gudun Slow
10.4
Lokacin Gano Amsa Tashi
10.5
Fita
1 Amp 1 Amp Matsakaici
0.2-6.0 Amps
0.2-6.0 Amps
Mai sauri, Matsakaici, Sannu a hankali kuma Sannu sosai
Margin ExampMotar tana aiki a 2 Amps kuma an saita gefe zuwa 1.5 Amps, gano toshewar zai faru a 3.5 Amps (Gudun yau da kullun + Margin).
Don manyan saitunan gefe mai na'ura mai ba da wutar lantarki ya kamata ya zama babban isa don samar da babban abin halin yanzu.
Idan gate din ya buga abu a rufe zai tsaya kai tsaye sannan ya sake budewa. Idan gate ya buga abu akan buɗewa zai tsaya kai tsaye.
www.elsema.com
25
Menu 11 Gudun Mota, Wurin Gudun Slow da Juya Lokaci
Menu Ba.
Gudun Mota, Wurin Gudun Slow da Juya Lokaci
11.1
Buɗe Gudu
Tsohuwar masana'anta
80%
11.2
Rufe Gudun
70%
11.3
Buɗe kuma Rufe Slow Speed
50%
11.4
Buɗe Wurin Saurin Slow
4
11.5
Rufe Wurin Gudun Slow
5
11.6
Dakatar da Jinkiri
0.4 seconds
11.7
Fita
Daidaitacce 50% zuwa 125% 50% zuwa 125% 25% to 65%
1 zuwa 12 1 zuwa 12 0.2 zuwa 2.5 seconds
11.1 & 11.2 Buɗewa da Gudun Rufewa Wannan yana saita saurin da ƙofar za ta bi. Idan kofar tana tafiya da sauri rage wannan darajar.
11.3 Slow Gudun Wannan yana saita saurin da ƙofar za ta yi tafiya a cikin yanki mai saurin gudu. Idan ƙofar tana tafiya a hankali ƙara wannan ƙimar.
11.4 & 11.5 Slow Gudun Wurin Wannan yana saita yankin tafiyar jinkirin. Idan kuna son ƙarin lokacin tafiya don yankin jinkirin saurin ƙara wannan ƙimar.
11.6 Tsaida Tsaida Lokacin Jinkiri Wannan yana saita lokacin tsayawa da juyar da lokacin jinkiri lokacin da ƙofar ya sami toshewa.
26
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
Menu 12 Anti-Jam, Electronic Braking da Motsin Ƙofar Bayan Hana
Menu Na 12.1
Anti-Jam ko Wutar Lantarki
Motoci 1 Buɗe Anti-Jam
KASHE Tsoffin masana'anta
Daidaitacce 0.1 zuwa 2.0 seconds
12.2
Motoci 1 Rufe Anti-Jam
KASHE
0.1 zuwa 2.0 seconds
12.3
Motoci 2 Buɗe Anti-Jam
KASHE
0.1 zuwa 2.0 seconds
12.4
Motoci 2 Rufe Anti-Jam
KASHE
0.1 zuwa 2.0 seconds
12.5
Birki na Lantarki
KASHE
Kashewa / Kunnawa
12.6
Hanyar Budewa : Motsin Ƙofar Bayan Tsagewa
Tsayawar Ƙofar
Tsaya / Juya don 2 sec / Juya Gabaɗaya
12.7
Hanyar Rufewa: Motsin Ƙofar Bayan Hani
Juya na daƙiƙa 2 Tsaya / Juya don 2 sec / Juya Gabaɗaya
12.8
Fita
12.1 da 12.2 Mota 1 Buɗe da Rufe Anti-Jam Lokacin da ƙofar ke cikin cikakkiyar buɗewa ko cikakken rufewa wannan yanayin yana shafi juzu'in juzu'i.tage na ɗan gajeren lokaci. Zai hana motar daga cunkoson kofa don haka yana da sauƙin cire injin ɗin don aiki da hannu.
12.3 da 12.4 Mota 2 Buɗe da Rufe Anti-Jam Lokacin da ƙofar ke cikin cikakkiyar buɗewa ko cikakken rufewa wannan yanayin yana shafi juzu'in juzu'i.tage na ɗan gajeren lokaci. Zai hana motar daga cunkoson kofa don haka yana da sauƙin cire injin ɗin don aiki da hannu.
12.5 Birki na Lantarki Wannan zai dakatar da motocin tare da birki na lantarki. Birki ya shafi toshewa da Dakatar da abubuwan shiga.
12.6 Jagoran Buɗewa: Motsin Ƙofar Bayan Tashewa Bayan an samu cikas yayin buɗewa, ƙofar za ta tsaya, ta koma baya na daƙiƙa 2 ko kuma ta koma gaba ɗaya.
12.7 Jagoran Rufewa: Motsin Ƙofar Bayan Tsashewa Bayan an samu cikas yayin rufewa, ƙofar za ta tsaya, ta koma baya na daƙiƙa 2 ko kuma ta koma gaba ɗaya.
www.elsema.com
27
Menu 13 i-Learning
Wannan fasalin yana ba ku damar yin ilimin tafiye-tafiye na hankali na ƙofar. Bi saƙonni akan LCD don kammala koyo
Menu 14 Kalmar wucewa
Wannan zai ba mai amfani damar shigar da kalmar sirri don hana masu amfani mara izini shiga saitunan katin sarrafawa. Dole ne mai amfani ya tuna kalmar sirri. Hanya daya tilo da za a sake saita kalmar sirri ta bata ita ce mayar da katin sarrafawa zuwa Elsema. Don share kalmar wucewa zaɓi Menu 14.2 kuma latsa Sarrafa Jagora.
Menu 15 Rubutun Ayyuka
Wannan don bayani ne kawai.
Menu Na 15.1 15.2 15.3 15.4
Tarihin Abubuwan Da Ya faru na Rubuce-rubucen Ayyuka, ana yin rikodin abubuwan har zuwa 100 a cikin ƙwaƙwalwar ajiya
Yana Nuna Ayyukan Ƙofar da Matsayin Yanzu Sake saita Madaidaicin Fitar Bayanan Yanzu
15.1 Tarihin Tarihi Tarihin taron zai adana abubuwa 100. Ana yin rikodin abubuwan da suka faru masu zuwa cikin ƙwaƙwalwar ajiya: Kunna Wuta, Ƙananan Baturi, Duk kunnawa shigarwa, Nasarar Buɗewa, Rufe Nasarar, Gane cikas, Ƙoƙarin Koyon da bai Yi nasara ba, Sake saitin masana'anta, Fitar da DC fiye da kima, Samar da AC ya gaza, Maido da Samar da AC, Rufewa Kai tsaye, Kare Tsaro da Fuse.
15.2 Yana Nuna Ayyuka da Matakan Yanzu Wannan yana nuna adadin buɗaɗɗen zagayowar, zagaye na kusa, hawan keken ƙafa, buɗewar toshewa, rufewa da duka matakan motsi na yanzu. Duk iyakar ƙimar halin yanzu mai amfani na iya sake saita shi a Menu 15.3
28
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
Menu 16 Kayan aiki
Menu Na 16.1 16.2 16.3 16.4 16.5 16.6 16.7 16.8 16.9 16.10
Adadin Kayan Aikin Motoci, Tsarin Ƙofa ɗaya ko Biyu
Saita Voltage: 12 ko 24 Volts Yana Sake saitin Mai Gudanarwa zuwa Saitunan masana'anta
Gwajin shigar da Lokacin Balaguro don Slip Clutch Motors Yanayin Ƙofar Rana: Yana haɓaka Katin Sarrafa don Aikace-aikacen Solar
Nau'in Fuse: 10 ko 15 Amps Yana Haɓaka Katin Sarrafa don daidaitaccen Blade Fuse da aka yi amfani da shi
Daidaita Hankalin Rana da Dare don DNS Slow Speed Ramp Saukar Lokacin Fitowa
16.1 Yawan Motoci Wannan yana ba ku damar saita katin sarrafawa da hannu zuwa injin guda ɗaya ko biyu. Katin sarrafawa zai gwada ta atomatik don injinan da aka haɗa yayin saiti.
16.2 Saita Kayan Aiki Voltage Wannan yana ba ku damar saita katin sarrafawa da hannu zuwa wadatar 12 ko 24 Volt. Katin sarrafawa zai saita madaidaicin samar da voltage a lokacin saitin. Don amfani da katin sarrafawa a aikace-aikacen hasken rana dole ne ka saita daidai voltage a cikin Kayan aiki. Wannan zai kashe atomatik voltage ji wanda zai iya haifar da matsala a aikace-aikacen hasken rana.
16.3 Sake saitin Mai sarrafawa Sake saita duk saituna zuwa tsohowar masana'anta. Hakanan yana cire kalmar sirri.
16.4 Abubuwan Shigar Gwaji Wannan yana ba ku damar gwada duk na'urorin waje waɗanda ke da alaƙa da abubuwan shigar da masu sarrafawa. UPPERCASE yana nufin an kunna shigarwa kuma ƙarami yana nufin an kashe shigarwar.
16.5 Mai ƙidayar Balaguro don Slip Clutch Motors Wannan yana ba ku damar amfani da mai sarrafawa tare da lokacin tafiya. Motoci 1 da 2 na iya samun lokutan tafiya daban har zuwa daƙiƙa 120. Ana amfani da Motoci na Hydraulic.
16.9 Slow Speed Ramp Down Time Wannan yana ba ku damar canza lokacin da ake ɗaukar ƙofar don canza saurinta daga sauri zuwa sannu.
www.elsema.com
29
Nuni LCD ya bayyana
Matsayin Ƙofar
Matsayin shigarwa
Iyakance Matsayin Canjawa
Matsayin Ƙofar Ƙofar Buɗe Ƙofar Rufe Ƙofar An Dakatar da Kanshi
Iyakance Matsayin Canjawa M1OpnLmON M2OpnLmON M1ClsLmON M2ClsLmON
Matsayin shigar da Opn ON Cls ON Tasha ON PE AKAN PB AKAN PED ON
Bayanin Ƙofar tana cikin cikakken buɗaɗɗen wuri Ƙofar tana cikin cikakken madaidaicin wuri ko ɗaya daga cikin abubuwan da aka shigar ko kuma katin kula da nesa ya sami cikas.
Bayanin Motar 1 Buɗewar iyaka tana ON.
Bayanin An kunna Buɗe shigarwar Rufe shigarwa yana kunna Dakatar da shigarwar yana kunna An kunna shigar da maɓallin Hoto An kunna shigar da maɓallin Maɓalli yana kunna shigarwar shiga Tafiya.
30
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
Jagoran Shirya matsala
A lokacin i-Learn, ƙofar za ta buɗe kuma ta rufe sau 3. Zagayen farko yana cikin jinkirin gudu. Zagaye na biyu yana cikin sauri sauri. Zagaye na uku zai kasance cikin sauri sauri amma ƙofar zai ragu kafin ya kai ƙarshen.
Kuskure yayin i-Learn
i-Learn ya makale a 14% i-Learn ya makale a 28%
Ƙofofin ba su cika buɗewa ko rufewa gabaɗaya a cikin zagayowar i-Learn na 1st
Magani
Rage Tazarar Hana Gudun M1 da M2 (Menu 9.3 & 10.3) Rage M1 da M2 Buɗaɗɗen Tashi (Menu 9.1 & 10.1)
Ƙara M1 da M2 Slow Speed Tare (Menu 9.3 & 10.3)
Ƙofofin ba su cika buɗewa ko rufewa gabaɗaya a cikin zagayowar i-Learn na biyu
Ƙara M1 da M2 Buɗe ko Rufe Tashi (Menu 9.1, 9.2 & 10.1, 10.2)
Canjin iyaka ya kasa yin rijista kuma ƙofar ba a buɗe take ko rufe ba
matsayi.
Don sake zagayowar 1st. Ƙara M1 da M2 Slow Speed Tare (Menu 9.3 & 10.3). Domin zagaye na 2 & 3rd. Ƙara M1 da M2 Buɗe ko Rufe Tashi (Menu 9.1,
9.2 & 10.1, 10.2)
Canjin iyaka ya kasa yin rijista kuma ƙofar tana cikin cikakke a buɗe ko a rufe
matsayi.
Ƙayyadadden matsayi na sauyawa bai dace ba. Ƙofar ta isa wurin tsayawa ta zahiri ko mafi girman tafiya kafin a kunna iyaka.
Kuskure yayin Aiki
Magani
Ƙofar ba ta cika buɗewa ko rufewa gaba ɗaya amma LCD ta ce “An buɗe Ƙofar” ko
"An Rufe Ƙofar".
Ƙara M1 da M2 Slow Speed Tare (Menu 9.3 & 10.3) dangane da wanne injin ɗin bai buɗe ko rufe ba.
LCD yana cewa "An gano toshewa" lokacin da babu cikas.
Ƙara M1 da M2 Buɗe ko Rufe Tashi (Menu 9.1, 9.2 & 10.1, 10.2)
Ƙofar baya mayar da martani ga masu ramut ko duk wani faɗakarwa na gida.
Duba LCD don halin shigarwa (duba shafi na baya). Idan kowace shigarwa ta kunna kuma tana aiki, katin ba zai amsa kowane umarni ba.
www.elsema.com
31
Na'urorin haɗi
Batir Ajiyayyen & Cajin Baturi Katin sarrafawa yana da ginanniyar caja don madadin batura. Kawai haɗa batura zuwa tashar baturi kuma caja za ta yi cajin batura ta atomatik. Elsema tana da kewayon girman baturi.
Aikace-aikacen Solar Elsema ta tanadi kayan sarrafa ƙofar hasken rana, fale-falen hasken rana, caja na hasken rana da cikakkun ma'aikatan ƙofar hasken rana su ma. GARGADI Don amfani da katin sarrafawa a aikace-aikacen hasken rana dole ne ka saita daidai voltage shigarwa a cikin Menu na Kayan aiki (16.2). Wannan zai kashe atomatik voltage ji wanda zai iya haifar da matsala a aikace-aikacen hasken rana.
Hannun Hannun Hannu da aka riga aka yi & Masu Gano Madauki Elsema yana da kewayon Saw-Cut da madaukai na Binne kai tsaye. An riga an ƙirƙira su tare da ƙimar madauki da aka ba da shawarar don aikace-aikacen kasuwanci ko na gida kuma suna sa shigarwa cikin sauri da sauƙi.
Wireless Bump Strip Safety gefen tsiri an shigar dashi akan kofa mai motsi ko shamaki tare da mai watsawa. Lokacin da ƙofar ya ci karo da cikas, mai watsawa yana aika sigina mara waya zuwa mai karɓa don dakatar da ƙofar daga yin lahani.
Ajiyayyen Batura
Tashoshin Rana
Madauki Inductive
Masu gano madauki
Tushen Tsarar Lafiya
32
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
Maɓallin Maɓalli Sabbin hanyoyin nesa na PentaFOB® suna tabbatar da amintattun ƙofofinku ko ƙofofinku. Ziyarci www.elsema.com don ƙarin bayani.
PentaFOB® Nesa
PentaFOB® Mai Shirye-shiryen
Ƙara, shirya da share abubuwan nesa na PentaFOB® daga ƙwaƙwalwar ajiyar mai karɓa. Hakanan ana iya kiyaye mai karɓar kalmar sirri daga shiga mara izini.
Mai haɓakawa don masu nisa na PentaFOB®
Penta Repeater na iya ƙara kewayon aiki na nesa na maɓalli zuwa mita 500.
Maimaitawa/mai ƙarfafawa don abubuwan nesa na PentaFOB®
Hasken walƙiya Elsema yana da fitilolin walƙiya da yawa don yin aiki azaman gargaɗi lokacin da ƙofar ko ƙofa ke aiki.
PentaFOB® Mai Shirye-shiryen
Fitilar Fitowa
www.elsema.com
33
PentaFOB® Umarnin Shirye-shiryen
1. Latsa ka riƙe maɓallin shirin akan na'urar da aka gina (Dubi tsarin haɗin MC) 2. Danna maɓallin nesa na tsawon daƙiƙa 2 yayin da kake riƙe maɓallin shirin akan mai karɓa 3. LED mai karɓa zai yi haske sannan ya juya Green 4. Saki maɓallin akan mai karɓa 5. Danna maɓallin nesa don gwada fitarwar mai karɓa.
Goge Ƙwaƙwalwar Ƙwaƙwalwar Mai karɓa Gajartar lambar Sake saitin fil akan mai karɓa na tsawon daƙiƙa 10. Wannan zai goge duk abubuwan nesa daga memorin mai karɓa.
PentaFOB® Programmer Wannan mai tsara shirye-shirye yana ba ka damar ƙarawa da share wasu ramut daga ƙwaƙwalwar ajiyar mai karɓa. Ana amfani da wannan lokacin da aka rasa na'ura mai nisa ko mai haya ya tashi daga wurin kuma mai shi yana son hana shiga mara izini.
PentaFOB® Chips Ajiyayyen Ana amfani da wannan guntu don wariyar ajiya ko mayar da abun ciki na mai karɓa. Lokacin da akwai 100's na remotes da aka tsara zuwa mai karɓa, mai sakawa yakan yi ajiyar ƙwaƙwalwar ajiyar ƙwaƙwalwar ajiya idan mai karɓa ya lalace.
34
Mai Kula da Ƙofa Biyu & Ƙofa tare da Eclipse® Operating System (EOS)
BAYANI
________________________________________________________________ __________________________________________________ ________________________________________________________________ ________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________ ________________________________________________________________
www.elsema.com
35
Kayan aikin motar kofa mai zamewa
Maɓalli na nesa
Kayan kayan motsa jikin kofa
Kayan aikin motar kofa mai zamewa
Kayan kayan motsa jikin kofa
Katunan sarrafa motoci & Kits
ELSEMA PTY LTD
31 Tarlington Place Smithfield, NSW 2164
Ostiraliya
P 02 9609 4668 W www.elsema.com
Takardu / Albarkatu
 |
ELSEMA MC240 Mai Kula da Ƙofa Biyu da Guda Daya [pdf] Jagoran Jagora MC240 Mai Kula da Ƙofa Biyu da Guda ɗaya, MC240, Mai Kula da Ƙofar Ƙofar Biyu da Guda ɗaya, Mai Kula da Ƙofar Ƙofar Guda, Mai Kula da Ƙofa |