JOMOX Mk II 面板 CPU 操作系统通过 SD 卡 Urorack 模块安装在模块化网格上

规格

• 产品：Alpha Base Mk II
• 操作系统更新方式：SD卡
• Files Needed: AlphaMk2.bin for main system, ABSYSPan.bin for panel board CPU

通过 SD 卡更新 Alpha Base Mk II 操作系统：

1. 下载所需的 file AlphaMk2.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to initiate the update process.
3. 导航至加载操作系统 file AlphaMk2.bin and press (Enter).
4. Confirm the update when prompted and wait for the programming to finish without turning off the device.
5. After completion, turn off and on the Alpha Base Mk II to see the new version number.

通过 SD 卡更新 Alpha Base Mk II 面板 CPU 操作系统：

1. 下载所需的 file ABSYSPan.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to start the update process.
3. 选择加载面板 CPU OS file ABSYSPan.bin and confirm the update.
4. Allow the system blocks to be copied to the panel board CPU memory without interrupting the process.
5. Observe the LEDs indicating the updating progress and once completed, continue using the Alpha Base Mk II.

通过 SD 卡更新 Alpha Base Mk II 操作系统

1. 下载最新的 file „AlphaMk2.bin“ at https://www.jomox.de/upload/updates/AlphaMk2.bin to your computer. You can also find the file 在产品领域 web如果您向下滚动到更新 files. 复制此 file 到SD卡根目录。
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • 显示屏显示：
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d O S S y s t e m F i l e
   • A l p h a M k 2 . b i n _ _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • A t t e n t i o n O S U p d a t e !
     A r e y o u s u r e ? L o a d = E n t
5. Now press (Enter) again. The updating process starts and the system file 会被复制到闪存。在此过程中，切勿关闭 Alpha Base Mk II！几秒钟后，显示屏会显示：
   • P r o g r a m m i n g f i n i s h e d
   • T u r n u n i t o f f a n d o n
6. Now please turn the Alpha Base Mk II off and on again and see the new version number in the display.
   • Please note that, after updating, the global settings like preset no. are reset to default.
   • Pressing STO KIT writes the actual global settings to permanent memory again.
   • 就是这样。

通过 SD 卡更新 Alpha Base Mk II 面板 CPU 操作系统

1. The Alpha Base MkII has a separate panel board CPU that performs the scanning of encoders and buttons, processes the RGB LEDs and the OLED graphics display. Download the most recent file „ABSYSPan.bin“ at  https://www.jomox.de/upload/updates/ABSYSPan.bin to your computer. You can also find the file 在产品领域 web如果您向下滚动到更新 files. 复制此 file 到SD卡根目录。
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • 显示屏显示：
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try, first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d P a n e l C P U O S f i l e
   • A B S Y S P a n . b i n _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • P a n e l C P U O S U p d a t e !
   • A r e y o u s u r e? = E n t
5. Now press (Enter) again. The updating process starts, and the system blocks get copied to the panel board CPU memory.
   • • F r o n t P a n e l O S T r a n s m i s s i o n
   • The step LEDs light up in violet, indicating the blocks that count up. After a couple of seconds, the red LEDs start flashing and the actual updating takes place:
     • E x e c u t i n g F l a s h O S
       • W r i t e t o m e m o r y & r e s e t
   • 在此过程中，您不得关闭 Alpha Base Mk II！
6. Now the display shows
   • • P a n e l B o a r d C P U v e r 1 x
   • 例如，您可以按下 KIT/SEQ 键，然后屏幕将恢复正常显示。现在您可以继续使用 Alpha Base MkII，无需重启。就是这样。
   • 笔记：
     If, for some reason, the internal transmission failed and for instance this error message appears:
     • F r o n t P a n e l O S T r a n s m i s s i o n
     • M i s s i n g B l o c k s E r r o r
     • E x p e c t e d : 0 0 9 R e c e i v e d : 0 0 8
     • D u m p R e c e p t i o n C a n c e l l e d
   • 别担心，只需关闭并打开机器，然后再次进行前面板操作系统更新。

常见问题解答

Q：更新过程中出现错误怎么办？

A: If an error occurs during the update process, refer to the user manual for troubleshooting steps or contact customer support for assistance.

文件/资源

JOMOX Mk II 面板 CPU 操作系统通过 SD 卡 Urorack 模块安装在模块化网格上 [pdf] 指示 Mk II 配电盘 CPU 操作系统通过 SD 卡 Urorack 模块在模块化网格上，Mk II，配电盘 CPU 操作系统通过 SD 卡 Urorack 模块在模块化网格上，SD 卡 Urorack 模块在模块化网格上，Urorack 模块在模块化网格上，模块在模块化网格上，模块化网格

参考

• 用户手册