Sistema operativo da CPU da placa de panel JOMOX Mk II mediante tarxeta SD, módulo Urorack en rede modular

Especificacións

• Produto: Alpha Base Mk II
• Método de actualización do sistema operativo: tarxeta SD
• Files Needed: AlphaMk2.bin for main system, ABSYSPan.bin for panel board CPU

Actualización do sistema operativo Alpha Base Mk II mediante unha tarxeta SD:

1. Descarga o necesario file AlphaMk2.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to initiate the update process.
3. Navegar para cargar o sistema operativo file AlphaMk2.bin and press (Enter).
4. Confirm the update when prompted and wait for the programming to finish without turning off the device.
5. After completion, turn off and on the Alpha Base Mk II to see the new version number.

Actualización do sistema operativo da CPU da placa Alpha Base Mk II mediante unha tarxeta SD:

1. Descarga o necesario file ABSYSPan.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to start the update process.
3. Seleccionar para cargar o sistema operativo da CPU do panel file ABSYSPan.bin and confirm the update.
4. Allow the system blocks to be copied to the panel board CPU memory without interrupting the process.
5. Observe the LEDs indicating the updating progress and once completed, continue using the Alpha Base Mk II.

Actualización do sistema operativo Alpha Base Mk II mediante unha tarxeta SD

1. Descarga o máis recente file „AlphaMk2.bin“ at https://www.jomox.de/upload/updates/AlphaMk2.bin to your computer. You can also find the file na área de produtos do websitio se desprazas cara abaixo ata a actualización files. Copia isto file ao directorio raíz da tarxeta SD.
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • A pantalla mostra:
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d O S S y s t e m F i l e
   • A l p h a M k 2 . b i n _ _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • A t t e n t i o n O S U p d a t e !
     A r e y o u s u r e ? L o a d = E n t
5. Now press (Enter) again. The updating process starts and the system file cópiase na memoria flash. Durante este proceso, NON DEBES apagar a Alpha Base Mk II! Despois duns segundos, a pantalla mostra:
   • P r o g r a m m i n g f i n i s h e d
   • T u r n u n i t o f f a n d o n
6. Now please turn the Alpha Base Mk II off and on again and see the new version number in the display.
   • Please note that, after updating, the global settings like preset no. are reset to default.
   • Pressing STO KIT writes the actual global settings to permanent memory again.
   • Iso é.

Actualización do sistema operativo da CPU da placa de panel Alpha Base Mk II mediante tarxeta SD

1. The Alpha Base MkII has a separate panel board CPU that performs the scanning of encoders and buttons, processes the RGB LEDs and the OLED graphics display. Download the most recent file „ABSYSPan.bin“ at  https://www.jomox.de/upload/updates/ABSYSPan.bin to your computer. You can also find the file na área de produtos do websitio se desprazas cara abaixo ata a actualización files. Copia isto file ao directorio raíz da tarxeta SD.
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • A pantalla mostra:
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try, first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d P a n e l C P U O S f i l e
   • A B S Y S P a n . b i n _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • P a n e l C P U O S U p d a t e !
   • A r e y o u s u r e? = E n t
5. Now press (Enter) again. The updating process starts, and the system blocks get copied to the panel board CPU memory.
   • • F r o n t P a n e l O S T r a n s m i s s i o n
   • The step LEDs light up in violet, indicating the blocks that count up. After a couple of seconds, the red LEDs start flashing and the actual updating takes place:
     • E x e c u t i n g F l a s h O S
       • W r i t e t o m e m o r y & r e s e t
   • Durante este proceso, NON DEBES apagar a Alpha Base Mk II!
6. Now the display shows
   • • P a n e l B o a r d C P U v e r 1 x
   • Podes premer, por exemplo, KIT/SEQ agora e aparecerá a pantalla normal. Podes continuar traballando co Alpha Base MkII agora sen reiniciar. Iso foi todo.
   • NOTA:
     If, for some reason, the internal transmission failed and for instance this error message appears:
     • F r o n t P a n e l O S T r a n s m i s s i o n
     • M i s s i n g B l o c k s E r r o r
     • E x p e c t e d : 0 0 9 R e c e i v e d : 0 0 8
     • D u m p R e c e p t i o n C a n c e l l e d
   • Non te preocupes, só tes que apagar e acende-la máquina e actualizar de novo o sistema operativo do panel frontal.

Preguntas frecuentes

P: Que debo facer se se produce un erro durante o proceso de actualización?

A: If an error occurs during the update process, refer to the user manual for troubleshooting steps or contact customer support for assistance.

Documentos/Recursos

Sistema operativo da CPU da placa de panel JOMOX Mk II mediante tarxeta SD, módulo Urorack en rede modular [pdfInstrucións SO da CPU da placa de panel Mk II a través da tarxeta SD Módulo Urorack en rede modular, Mk II, SO da CPU da placa de panel a través da tarxeta SD Módulo Urorack en rede modular, tarxeta SD Módulo Urorack en rede modular, Módulo Urorack en rede modular, Módulo en rede modular, rede modular

Referencias

• Manual de usuario