JOMOX Mk II Papan Panel OS CPU Melalui Kad SD Modul Urorack Pada Grid Modular

Spesifikasi

• Produk: Alpha Base Mk II
• Kaedah Kemas Kini OS: Kad SD
• Files Needed: AlphaMk2.bin for main system, ABSYSPan.bin for panel board CPU

Mengemas kini OS Alpha Base Mk II melalui kad SD:

1. Muat turun yang diperlukan file AlphaMk2.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to initiate the update process.
3. Navigasi untuk memuatkan sistem OS file AlphaMk2.bin and press (Enter).
4. Confirm the update when prompted and wait for the programming to finish without turning off the device.
5. After completion, turn off and on the Alpha Base Mk II to see the new version number.

Mengemas kini OS CPU Papan Panel Alpha Base Mk II melalui kad SD:

1. Muat turun yang diperlukan file ABSYSPan.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to start the update process.
3. Pilih untuk memuatkan Panel OS CPU file ABSYSPan.bin and confirm the update.
4. Allow the system blocks to be copied to the panel board CPU memory without interrupting the process.
5. Observe the LEDs indicating the updating progress and once completed, continue using the Alpha Base Mk II.

Mengemas kini OS Alpha Base Mk II melalui kad SD

1. Muat turun yang terbaharu file „AlphaMk2.bin“ at https://www.jomox.de/upload/updates/AlphaMk2.bin to your computer. You can also find the file dalam kawasan produk webtapak jika anda tatal ke bawah untuk kemas kini files. Salin ini file ke direktori akar kad SD.
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • Paparan menunjukkan:
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d O S S y s t e m F i l e
   • A l p h a M k 2 . b i n _ _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • A t t e n t i o n O S U p d a t e !
     A r e y o u s u r e ? L o a d = E n t
5. Now press (Enter) again. The updating process starts and the system file akan disalin ke memori kilat. Semasa proses ini, anda TIDAK MESTI mematikan Alpha Base Mk II! Selepas beberapa saat paparan berbunyi:
   • P r o g r a m m i n g f i n i s h e d
   • T u r n u n i t o f f a n d o n
6. Now please turn the Alpha Base Mk II off and on again and see the new version number in the display.
   • Please note that, after updating, the global settings like preset no. are reset to default.
   • Pressing STO KIT writes the actual global settings to permanent memory again.
   • Itu sahaja.

Mengemas kini OS CPU Papan Panel Alpha Base Mk II melalui kad SD

1. The Alpha Base MkII has a separate panel board CPU that performs the scanning of encoders and buttons, processes the RGB LEDs and the OLED graphics display. Download the most recent file „ABSYSPan.bin“ at  https://www.jomox.de/upload/updates/ABSYSPan.bin to your computer. You can also find the file dalam kawasan produk webtapak jika anda tatal ke bawah untuk kemas kini files. Salin ini file ke direktori akar kad SD.
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • Paparan menunjukkan:
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try, first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d P a n e l C P U O S f i l e
   • A B S Y S P a n . b i n _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • P a n e l C P U O S U p d a t e !
   • A r e y o u s u r e? = E n t
5. Now press (Enter) again. The updating process starts, and the system blocks get copied to the panel board CPU memory.
   • • F r o n t P a n e l O S T r a n s m i s s i o n
   • The step LEDs light up in violet, indicating the blocks that count up. After a couple of seconds, the red LEDs start flashing and the actual updating takes place:
     • E x e c u t i n g F l a s h O S
       • W r i t e t o m e m o r y & r e s e t
   • Semasa proses ini, anda TIDAK MESTI mematikan Alpha Base Mk II!
6. Now the display shows
   • • P a n e l B o a r d C P U v e r 1 x
   • Anda boleh menekan cth KIT/SEQ sekarang dan paparan biasa akan muncul. Anda boleh terus bekerja dengan Alpha Base MkII sekarang tanpa but semula. Itu sahaja.
   • NOTA:
     If, for some reason, the internal transmission failed and for instance this error message appears:
     • F r o n t P a n e l O S T r a n s m i s s i o n
     • M i s s i n g B l o c k s E r r o r
     • E x p e c t e d : 0 0 9 R e c e i v e d : 0 0 8
     • D u m p R e c e p t i o n C a n c e l l e d
   • Jangan risau, hanya matikan dan hidupkan mesin dan lakukan pengemaskinian OS Panel Depan sekali lagi.

Soalan Lazim

S: Apakah yang perlu saya lakukan jika ralat berlaku semasa proses kemas kini?

A: If an error occurs during the update process, refer to the user manual for troubleshooting steps or contact customer support for assistance.

Dokumen / Sumber

JOMOX Mk II Papan Panel OS CPU Melalui Kad SD Modul Urorack Pada Grid Modular [pdf] Arahan OS CPU Papan Panel Mk II Melalui Modul Urorack Kad SD Pada Grid Modular, Mk II, OS CPU Papan Panel Melalui Modul Urorack Kad SD Pada Grid Modular, Modul Urorack Kad SD Pada Grid Modular, Modul Urorack Pada Grid Modular, Modul Pada Grid Modular, Grid Modular

Rujukan

• Manual Pengguna