JOMOX Mk II Panelboard CPU OS Ta hanyar katin SD Urorack Module akan Grid na Modular

Ƙayyadaddun bayanai

• Samfurin: Alpha Base Mk II
• Hanyar Sabunta OS: katin SD
• Files Needed: AlphaMk2.bin for main system, ABSYSPan.bin for panel board CPU

Ana sabunta Alpha Base Mk II OS ta katin SD:

1. Zazzage abin da ake buƙata file AlphaMk2.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to initiate the update process.
3. Kewaya don loda tsarin OS file AlphaMk2.bin and press (Enter).
4. Confirm the update when prompted and wait for the programming to finish without turning off the device.
5. After completion, turn off and on the Alpha Base Mk II to see the new version number.

Ana ɗaukaka Alpha Base Mk II Panelboard CPU OS ta katin SD:

1. Zazzage abin da ake buƙata file ABSYSPan.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to start the update process.
3. Zaɓi don loda Panel CPU OS file ABSYSPan.bin and confirm the update.
4. Allow the system blocks to be copied to the panel board CPU memory without interrupting the process.
5. Observe the LEDs indicating the updating progress and once completed, continue using the Alpha Base Mk II.

Ana sabunta Alpha Base Mk II OS ta katin SD

1. Zazzage na baya-bayan nan file „AlphaMk2.bin“ at https://www.jomox.de/upload/updates/AlphaMk2.bin to your computer. You can also find the file a cikin yankin samfur na website idan kun gungura ƙasa zuwa sabuntawa files. Kwafi wannan file zuwa tushen directory na katin SD.
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • Nunin yana nuna:
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d O S S y s t e m F i l e
   • A l p h a M k 2 . b i n _ _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • A t t e n t i o n O S U p d a t e !
     A r e y o u s u r e ? L o a d = E n t
5. Now press (Enter) again. The updating process starts and the system file yana samun kwafi zuwa ƙwaƙwalwar ajiya. Yayin wannan tsari, DOLE KADA KA kashe Alpha Base Mk II! Bayan ƴan daƙiƙa kaɗan nunin yana karanta:
   • P r o g r a m m i n g f i n i s h e d
   • T u r n u n i t o f f a n d o n
6. Now please turn the Alpha Base Mk II off and on again and see the new version number in the display.
   • Please note that, after updating, the global settings like preset no. are reset to default.
   • Pressing STO KIT writes the actual global settings to permanent memory again.
   • Shi ke nan.

Ana ɗaukaka Alpha Base Mk II Panelboard CPU OS ta katin SD

1. The Alpha Base MkII has a separate panel board CPU that performs the scanning of encoders and buttons, processes the RGB LEDs and the OLED graphics display. Download the most recent file „ABSYSPan.bin“ at  https://www.jomox.de/upload/updates/ABSYSPan.bin to your computer. You can also find the file a cikin yankin samfur na website idan kun gungura ƙasa zuwa sabuntawa files. Kwafi wannan file zuwa tushen directory na katin SD.
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • Nunin yana nuna:
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try, first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d P a n e l C P U O S f i l e
   • A B S Y S P a n . b i n _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • P a n e l C P U O S U p d a t e !
   • A r e y o u s u r e? = E n t
5. Now press (Enter) again. The updating process starts, and the system blocks get copied to the panel board CPU memory.
   • • F r o n t P a n e l O S T r a n s m i s s i o n
   • The step LEDs light up in violet, indicating the blocks that count up. After a couple of seconds, the red LEDs start flashing and the actual updating takes place:
     • E x e c u t i n g F l a s h O S
       • W r i t e t o m e m o r y & r e s e t
   • Yayin wannan tsari, DOLE KADA KA kashe Alpha Base Mk II!
6. Now the display shows
   • • P a n e l B o a r d C P U v e r 1 x
   • Kuna iya danna misali KIT/SEQ yanzu kuma nuni na yau da kullun zai bayyana. Kuna iya ci gaba da aiki tare da Alpha Base MkII yanzu ba tare da sake kunnawa ba. Shi ke nan.
   • NOTE:
     If, for some reason, the internal transmission failed and for instance this error message appears:
     • F r o n t P a n e l O S T r a n s m i s s i o n
     • M i s s i n g B l o c k s E r r o r
     • E x p e c t e d : 0 0 9 R e c e i v e d : 0 0 8
     • D u m p R e c e p t i o n C a n c e l l e d
   • Kada ku damu, kawai kashe kuma a kan na'ura kuma sake sake sabunta Panel OS na gaba.

FAQs

Tambaya: Menene zan yi idan kuskure ya faru yayin aikin sabuntawa?

A: If an error occurs during the update process, refer to the user manual for troubleshooting steps or contact customer support for assistance.

Takardu / Albarkatu

JOMOX Mk II Panelboard CPU OS Ta hanyar katin SD Urorack Module akan Grid na Modular [pdf] Umarni Mk II Panelboard CPU OS Ta hanyar SD Card Urorack Module A kan Modular Grid, Mk II, Panelboard CPU OS Via SD Card Urorack Module A kan Modular Grid, Katin Urorack Module akan Grid na Modular

Magana

• Manual mai amfani