JOMOX Mk II Panelboard CPU OS Via SD Card Urorack Module Ma Modular Grid

Nā kikoʻī

• Huahana: Alpha Base Mk II
• Hana Hou OS: Kāleka SD
• Files Needed: AlphaMk2.bin for main system, ABSYSPan.bin for panel board CPU

Ke hoʻonui nei i ka Alpha Base Mk II OS ma o ka kāleka SD:

1. Hoʻoiho i ka mea e pono ai file AlphaMk2.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to initiate the update process.
3. E hoʻokele e hoʻouka i ka ʻōnaehana OS file AlphaMk2.bin and press (Enter).
4. Confirm the update when prompted and wait for the programming to finish without turning off the device.
5. After completion, turn off and on the Alpha Base Mk II to see the new version number.

Hoʻohou i ka Alpha Base Mk II Panelboard CPU OS ma ke kāleka SD:

1. Hoʻoiho i ka mea e pono ai file ABSYSPan.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to start the update process.
3. E koho e hoʻouka Panel CPU OS file ABSYSPan.bin and confirm the update.
4. Allow the system blocks to be copied to the panel board CPU memory without interrupting the process.
5. Observe the LEDs indicating the updating progress and once completed, continue using the Alpha Base Mk II.

Ke hoʻonui nei i ka Alpha Base Mk II OS ma o ke kāleka SD

1. Hoʻoiho i ka mea hou loa file „AlphaMk2.bin“ at https://www.jomox.de/upload/updates/AlphaMk2.bin to your computer. You can also find the file ma ka wahi huahana o ka webpūnaewele inā ʻoe e kaomi i lalo i ka hoʻonui files. E kope i kēia file i ka papa kuhikuhi kumu o ke kāleka SD.
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • Hōʻike ka hōʻike:
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d O S S y s t e m F i l e
   • A l p h a M k 2 . b i n _ _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • A t t e n t i o n O S U p d a t e !
     A r e y o u s u r e ? L o a d = E n t
5. Now press (Enter) again. The updating process starts and the system file kope ʻia i ka hoʻomanaʻo flash. I kēia kaʻina hana, ʻAʻole pono ʻoe e hoʻopau i ka Alpha Base Mk II! Ma hope o kekahi mau kekona, heluhelu ka hōʻike:
   • P r o g r a m m i n g f i n i s h e d
   • T u r n u n i t o f f a n d o n
6. Now please turn the Alpha Base Mk II off and on again and see the new version number in the display.
   • Please note that, after updating, the global settings like preset no. are reset to default.
   • Pressing STO KIT writes the actual global settings to permanent memory again.
   • ʻo ia wale nō.

Hoʻohou i ka Alpha Base Mk II Panelboard CPU OS ma ke kāleka SD

1. The Alpha Base MkII has a separate panel board CPU that performs the scanning of encoders and buttons, processes the RGB LEDs and the OLED graphics display. Download the most recent file „ABSYSPan.bin“ at  https://www.jomox.de/upload/updates/ABSYSPan.bin to your computer. You can also find the file ma ka wahi huahana o ka webpūnaewele inā ʻoe e kaomi i lalo i ka hoʻonui files. E kope i kēia file i ka papa kuhikuhi kumu o ke kāleka SD.
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • Hōʻike ka hōʻike:
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try, first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d P a n e l C P U O S f i l e
   • A B S Y S P a n . b i n _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • P a n e l C P U O S U p d a t e !
   • A r e y o u s u r e? = E n t
5. Now press (Enter) again. The updating process starts, and the system blocks get copied to the panel board CPU memory.
   • • F r o n t P a n e l O S T r a n s m i s s i o n
   • The step LEDs light up in violet, indicating the blocks that count up. After a couple of seconds, the red LEDs start flashing and the actual updating takes place:
     • E x e c u t i n g F l a s h O S
       • W r i t e t o m e m o r y & r e s e t
   • I kēia kaʻina hana, ʻAʻole pono ʻoe e hoʻopau i ka Alpha Base Mk II!
6. Now the display shows
   • • P a n e l B o a r d C P U v e r 1 x
   • Hiki iā ʻoe ke kaomi eg KIT/SEQ i kēia manawa a ʻike ʻia ka hōʻike maʻamau. Hiki iā ʻoe ke hoʻomau i ka hana me ka Alpha Base MkII i kēia manawa me ka ʻole e hoʻomaka hou. ʻO ia nō.
   • MANAʻO:
     If, for some reason, the internal transmission failed and for instance this error message appears:
     • F r o n t P a n e l O S T r a n s m i s s i o n
     • M i s s i n g B l o c k s E r r o r
     • E x p e c t e d : 0 0 9 R e c e i v e d : 0 0 8
     • D u m p R e c e p t i o n C a n c e l l e d
   • Mai hopohopo, e hoʻopau wale i ka mīkini a hana hou i ka Front Panel OS.

FAQs

Nīnau: He aha kaʻu e hana ai inā loaʻa kahi hewa i ka wā o ke kaʻina hana hou?

A: If an error occurs during the update process, refer to the user manual for troubleshooting steps or contact customer support for assistance.

Palapala / Punawai

JOMOX Mk II Panelboard CPU OS Via SD Card Urorack Module Ma Modular Grid [pdf] Na kuhikuhi Mk II Panelboard CPU OS Via SD Card Urorack Module On Modular Grid, Mk II, Panelboard CPU OS Via SD Card Urorack Module On Modular Grid, SD Card Urorack Module On Modular Grid, Urorack Module On Modular Grid, Module On Modular Grid, Modular Grid

Nā kuhikuhi

• Palapala Hoʻohana