JOMOX Mk II 面板 CPU 作業系統透過 SD 卡 Urorack 模組安裝在模組化網格上

規格

• 產品：Alpha Base Mk II
• 作業系統更新方式：SD卡
• Files Needed: AlphaMk2.bin for main system, ABSYSPan.bin for panel board CPU

透過 SD 卡更新 Alpha Base Mk II 作業系統：

1. 下載所需的 file AlphaMk2.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to initiate the update process.
3. 導航至載入作業系統 file AlphaMk2.bin and press (Enter).
4. Confirm the update when prompted and wait for the programming to finish without turning off the device.
5. After completion, turn off and on the Alpha Base Mk II to see the new version number.

透過 SD 卡更新 Alpha Base Mk II 面板 CPU 作業系統：

1. 下載所需的 file ABSYSPan.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to start the update process.
3. 選擇載入面板 CPU OS file ABSYSPan.bin and confirm the update.
4. Allow the system blocks to be copied to the panel board CPU memory without interrupting the process.
5. Observe the LEDs indicating the updating progress and once completed, continue using the Alpha Base Mk II.

透過 SD 卡更新 Alpha Base Mk II 作業系統

1. 下載最新的 file „AlphaMk2.bin“ at https://www.jomox.de/upload/updates/AlphaMk2.bin to your computer. You can also find the file 在產品領域 web如果您向下捲動到更新 files. 複製此 file 到SD卡根目錄。
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • 顯示幕顯示：
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d O S S y s t e m F i l e
   • A l p h a M k 2 . b i n _ _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • A t t e n t i o n O S U p d a t e !
     A r e y o u s u r e ? L o a d = E n t
5. Now press (Enter) again. The updating process starts and the system file 會被複製到快閃記憶體。過程中，絕對不要關閉 Alpha Base Mk II！幾秒鐘後，顯示幕會顯示：
   • P r o g r a m m i n g f i n i s h e d
   • T u r n u n i t o f f a n d o n
6. Now please turn the Alpha Base Mk II off and on again and see the new version number in the display.
   • Please note that, after updating, the global settings like preset no. are reset to default.
   • Pressing STO KIT writes the actual global settings to permanent memory again.
   • 就是這樣。

透過 SD 卡更新 Alpha Base Mk II 面板 CPU 作業系統

1. The Alpha Base MkII has a separate panel board CPU that performs the scanning of encoders and buttons, processes the RGB LEDs and the OLED graphics display. Download the most recent file „ABSYSPan.bin“ at  https://www.jomox.de/upload/updates/ABSYSPan.bin to your computer. You can also find the file 在產品領域 web如果您向下捲動到更新 files. 複製此 file 到SD卡根目錄。
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • 顯示幕顯示：
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try, first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d P a n e l C P U O S f i l e
   • A B S Y S P a n . b i n _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • P a n e l C P U O S U p d a t e !
   • A r e y o u s u r e? = E n t
5. Now press (Enter) again. The updating process starts, and the system blocks get copied to the panel board CPU memory.
   • • F r o n t P a n e l O S T r a n s m i s s i o n
   • The step LEDs light up in violet, indicating the blocks that count up. After a couple of seconds, the red LEDs start flashing and the actual updating takes place:
     • E x e c u t i n g F l a s h O S
       • W r i t e t o m e m o r y & r e s e t
   • 過程中，您不得關閉 Alpha Base Mk II！
6. Now the display shows
   • • P a n e l B o a r d C P U v e r 1 x
   • 例如，您可以按下 KIT/SEQ 鍵，然後螢幕將恢復正常顯示。現在您可以繼續使用 Alpha Base MkII，無需重新啟動。就是這樣。
   • 筆記：
     If, for some reason, the internal transmission failed and for instance this error message appears:
     • F r o n t P a n e l O S T r a n s m i s s i o n
     • M i s s i n g B l o c k s E r r o r
     • E x p e c t e d : 0 0 9 R e c e i v e d : 0 0 8
     • D u m p R e c e p t i o n C a n c e l l e d
   • 別擔心，只需關閉並打開機器，然後再次進行前面板作業系統更新。

常見問題解答

Q：更新過程中出現錯誤怎麼辦？

A: If an error occurs during the update process, refer to the user manual for troubleshooting steps or contact customer support for assistance.

文件/資源

JOMOX Mk II 面板 CPU 作業系統透過 SD 卡 Urorack 模組安裝在模組化網格上 [pdf] 指示 Mk II 配電盤 CPU 作業系統透過 SD 卡 Urorack 模組在模組化網格上，Mk II，配電盤 CPU 作業系統透過 SD 卡 Urorack 模組在模組化網格上，SD 卡 Urorack 模組在模組化網格上，Urorack 模組在模組化網格上，模組在模組化網格上，模組化網格

參考

• 使用者手冊