JOMOX Mk II Panelboard CPU OS Via Kat SD Modil Urorack Sou Griy Modilè

Espesifikasyon

• Pwodwi: Alpha Base Mk II
• Metòd Mizajou Sistèm Operasyon an: Kat SD
• Files Needed: AlphaMk2.bin for main system, ABSYSPan.bin for panel board CPU

Mizajou sistèm operasyon Alpha Base Mk II a atravè kat SD:

1. Telechaje sa ki nesesè yo file AlphaMk2.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to initiate the update process.
3. Navige pou chaje sistèm operasyon an file AlphaMk2.bin and press (Enter).
4. Confirm the update when prompted and wait for the programming to finish without turning off the device.
5. After completion, turn off and on the Alpha Base Mk II to see the new version number.

Mizajou sistèm operasyon CPU Alpha Base Mk II Panelboard la atravè kat SD:

1. Telechaje sa ki nesesè yo file ABSYSPan.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to start the update process.
3. Chwazi pou chaje sistèm operasyon CPU Panel la file ABSYSPan.bin and confirm the update.
4. Allow the system blocks to be copied to the panel board CPU memory without interrupting the process.
5. Observe the LEDs indicating the updating progress and once completed, continue using the Alpha Base Mk II.

Mizajou sistèm operasyon Alpha Base Mk II a atravè kat SD

1. Telechaje pi resan an file „AlphaMk2.bin“ at https://www.jomox.de/upload/updates/AlphaMk2.bin to your computer. You can also find the file nan zòn pwodwi a nan websit la si ou desann nan aktyalizasyon an files. Kopye sa a file nan anyè rasin kat SD la.
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • Ekspozisyon an montre:
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d O S S y s t e m F i l e
   • A l p h a M k 2 . b i n _ _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • A t t e n t i o n O S U p d a t e !
     A r e y o u s u r e ? L o a d = E n t
5. Now press (Enter) again. The updating process starts and the system file ap kopye nan memwa flash la. Pandan pwosesis sa a, ou PA DWE etenn Alpha Base Mk II a! Apre kèk segonn, ekran an ap di:
   • P r o g r a m m i n g f i n i s h e d
   • T u r n u n i t o f f a n d o n
6. Now please turn the Alpha Base Mk II off and on again and see the new version number in the display.
   • Please note that, after updating, the global settings like preset no. are reset to default.
   • Pressing STO KIT writes the actual global settings to permanent memory again.
   • Se sa.

Mizajou sistèm operasyon CPU Alpha Base Mk II Panelboard la atravè kat SD

1. The Alpha Base MkII has a separate panel board CPU that performs the scanning of encoders and buttons, processes the RGB LEDs and the OLED graphics display. Download the most recent file „ABSYSPan.bin“ at  https://www.jomox.de/upload/updates/ABSYSPan.bin to your computer. You can also find the file nan zòn pwodwi a nan websit la si ou desann nan aktyalizasyon an files. Kopye sa a file nan anyè rasin kat SD la.
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • Ekspozisyon an montre:
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try, first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d P a n e l C P U O S f i l e
   • A B S Y S P a n . b i n _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • P a n e l C P U O S U p d a t e !
   • A r e y o u s u r e? = E n t
5. Now press (Enter) again. The updating process starts, and the system blocks get copied to the panel board CPU memory.
   • • F r o n t P a n e l O S T r a n s m i s s i o n
   • The step LEDs light up in violet, indicating the blocks that count up. After a couple of seconds, the red LEDs start flashing and the actual updating takes place:
     • E x e c u t i n g F l a s h O S
       • W r i t e t o m e m o r y & r e s e t
   • Pandan pwosesis sa a, ou PA DWE etenn Alpha Base Mk II a!
6. Now the display shows
   • • P a n e l B o a r d C P U v e r 1 x
   • Ou ka peze pa egzanp KIT/SEQ kounye a epi ekspozisyon nòmal la ap parèt. Ou ka kontinye travay avèk Alpha Base MkII a kounye a san ou pa bezwen redemare. Se te sa.
   • REMAK:
     If, for some reason, the internal transmission failed and for instance this error message appears:
     • F r o n t P a n e l O S T r a n s m i s s i o n
     • M i s s i n g B l o c k s E r r o r
     • E x p e c t e d : 0 0 9 R e c e i v e d : 0 0 8
     • D u m p R e c e p t i o n C a n c e l l e d
   • Pa enkyete w, jis etenn epi limen machin nan epi fè mizajou sistèm operasyon panèl devan an ankò.

FAQ

K: Kisa mwen ta dwe fè si yon erè rive pandan pwosesis aktyalizasyon an?

A: If an error occurs during the update process, refer to the user manual for troubleshooting steps or contact customer support for assistance.

Dokiman / Resous

JOMOX Mk II Panelboard CPU OS Via Kat SD Modil Urorack Sou Griy Modilè [pdfEnstriksyon yo Sistèm Operasyon CPU Panèl Mk II Via Kat SD Modil Urorack Sou Griy Modilè, Mk II, Sistèm Operasyon CPU Panèl Via Kat SD Modil Urorack Sou Griy Modilè, Kat SD Modil Urorack Sou Griy Modilè, Modil Urorack Sou Griy Modilè, Modil Sou Griy Modilè, Griy Modilè

Referans

• Manyèl itilizatè