Córas Oibriúcháin LAP Painéil JOMOX Mk II Trí Chárta SD Modúl Urorack Ar Eangach Modúlach

Sonraíochtaí

• Táirge: Alpha Base Mk II
• Modh Nuashonraithe OS: Cárta SD
• Files Needed: AlphaMk2.bin for main system, ABSYSPan.bin for panel board CPU

Nuashonrú ar chóras oibriúcháin Alpha Base Mk II trí chárta SD:

1. Íoslódáil an riachtanas is gá file AlphaMk2.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to initiate the update process.
3. Nascleanúint chun an córas oibriúcháin a luchtú file AlphaMk2.bin and press (Enter).
4. Confirm the update when prompted and wait for the programming to finish without turning off the device.
5. After completion, turn off and on the Alpha Base Mk II to see the new version number.

Nuashonrú ar chóras oibriúcháin LAP Painéal Alpha Base Mk II trí chárta SD:

1. Íoslódáil an riachtanas is gá file ABSYSPan.bin and copy it to the root directory of the SD card.
2. Insert the SD card into the Alpha Base Mk II and press (DISK) to start the update process.
3. Roghnaigh chun Córas Oibriúcháin LAP an Phainéil a luchtú file ABSYSPan.bin and confirm the update.
4. Allow the system blocks to be copied to the panel board CPU memory without interrupting the process.
5. Observe the LEDs indicating the updating progress and once completed, continue using the Alpha Base Mk II.

Nuashonrú ar chóras oibriúcháin Alpha Base Mk II trí chárta SD

1. Íoslódáil an ceann is déanaí file „AlphaMk2.bin“ at https://www.jomox.de/upload/updates/AlphaMk2.bin to your computer. You can also find the file i réimse táirgí an websuíomh má scrollaigh tú síos go dtí an nuashonrú files. Cóipeáil seo file chuig eolaire fréamhacha an chárta SD.
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • Taispeánann an taispeáint:
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d O S S y s t e m F i l e
   • A l p h a M k 2 . b i n _ _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • A t t e n t i o n O S U p d a t e !
     A r e y o u s u r e ? L o a d = E n t
5. Now press (Enter) again. The updating process starts and the system file déantar é a chóipeáil chuig cuimhne flash. Le linn an phróisis seo, NÍ MÓR duit an Alpha Base Mk II a mhúchadh! Tar éis cúpla soicind, léann an taispeáint:
   • P r o g r a m m i n g f i n i s h e d
   • T u r n u n i t o f f a n d o n
6. Now please turn the Alpha Base Mk II off and on again and see the new version number in the display.
   • Please note that, after updating, the global settings like preset no. are reset to default.
   • Pressing STO KIT writes the actual global settings to permanent memory again.
   • Sin é.

Nuashonrú ar chóras oibriúcháin LAP Painéal Alpha Base Mk II trí chárta SD

1. The Alpha Base MkII has a separate panel board CPU that performs the scanning of encoders and buttons, processes the RGB LEDs and the OLED graphics display. Download the most recent file „ABSYSPan.bin“ at  https://www.jomox.de/upload/updates/ABSYSPan.bin to your computer. You can also find the file i réimse táirgí an websuíomh má scrollaigh tú síos go dtí an nuashonrú files. Cóipeáil seo file chuig eolaire fréamhacha an chárta SD.
2. Insert the SD card to the Alpha Base Mk II. Press (DISK).
   • Taispeánann an taispeáint:
     • W A V f o u n d : 2 5 4 T a r g e t : 0 0 1
     • A B W V 0 0 0 1 . r a w _ _ _ _ L o a d = E n t
   • If the disk does not open at first, take out the SD card, push it in again and try again.
   • Sometimes the unit has to warm up a bit to read the SD card properly. With every try, first take out the card and push it in again.
3. Go right with the cursor until the display shows:
   • L o a d P a n e l C P U O S f i l e
   • A B S Y S P a n . b i n _ _ _ L o a d = E n t
4. Now press (Enter). The display shows:
   • P a n e l C P U O S U p d a t e !
   • A r e y o u s u r e? = E n t
5. Now press (Enter) again. The updating process starts, and the system blocks get copied to the panel board CPU memory.
   • • F r o n t P a n e l O S T r a n s m i s s i o n
   • The step LEDs light up in violet, indicating the blocks that count up. After a couple of seconds, the red LEDs start flashing and the actual updating takes place:
     • E x e c u t i n g F l a s h O S
       • W r i t e t o m e m o r y & r e s e t
   • Le linn an phróisis seo, NÍ MÓR duit an Alpha Base Mk II a mhúchadh!
6. Now the display shows
   • • P a n e l B o a r d C P U v e r 1 x
   • Is féidir leat brúigh mar shampla KIT/SEQ anois agus beidh an taispeáint gnáth le feiceáil. Is féidir leat leanúint ar aghaidh ag obair leis an Alpha Base MkII anois gan atosú. Sin a bhí ann.
   • NÓTA:
     If, for some reason, the internal transmission failed and for instance this error message appears:
     • F r o n t P a n e l O S T r a n s m i s s i o n
     • M i s s i n g B l o c k s E r r o r
     • E x p e c t e d : 0 0 9 R e c e i v e d : 0 0 8
     • D u m p R e c e p t i o n C a n c e l l e d
   • Ná bíodh imní ort, múch an meaisín agus cuir air é agus déan nuashonrú ar an OS Painéal Tosaigh arís.

CCanna

C: Cad ba cheart dom a dhéanamh má tharlaíonn earráid le linn an phróisis nuashonraithe?

A: If an error occurs during the update process, refer to the user manual for troubleshooting steps or contact customer support for assistance.

Doiciméid / Acmhainní

Córas Oibriúcháin LAP Painéil JOMOX Mk II Trí Chárta SD Modúl Urorack Ar Eangach Modúlach [pdfTreoracha Córas Oibriúcháin LAP Painéil Mk II Trí Chárta SD Modúl Urorack Ar Eangach Modúlach, Mk II, Córas Oibriúcháin LAP Painéil Trí Chárta SD Modúl Urorack Ar Eangach Modúlach, Cárta SD Modúl Urorack Ar Eangach Modúlach, Modúl Urorack Ar Eangach Modúlach, Modúl Ar Eangach Modúlach, Eangach Modúlach

Tagairtí

• Lámhleabhar Úsáideora