Interface 3A Series Multi Axis Load Cells Manual Instruksi

INFORMASI INSTALASI

1. Modél panganteur 3A Series sél beban multi-sumbu kudu dipasang dina permukaan anu datar tur cukup kaku ku kituna teu deform appreciably handapeun beban.
2. Fasteners kedah Grade 8.8 pikeun 3A60 thru 3A160 jeung Grade 10.9 pikeun 3A300 na 3A400
3. Sensor kudu dipasang ngagunakeun screws dianjurkeun jeung torsi ningkatna dina tabel di handap ieu.
4. Pin Dowel kedah dianggo dina sadaya permukaan anu dipasang.
5. Pikeun 3A300 sareng 3A400 sahenteuna dua pin dowel kedah dianggo dina tungtung langsung. Nepi ka 5 tiasa dianggo.
6. Pikeun sénsor 500N sareng saluhureuna, palapis ipis Loctite 638 atanapi anu sami disarankeun dina tilu permukaan dipasang pikeun nyegah slippage.
7. Pamasangan sareng pelat ngan ukur tiasa ngahubungi sénsor dina permukaan anu dipasang.

RÉSÉLÉNG MOUNTING

	Modél	Dipeunteun beban / Kamampuh	Diménsi	Bahan	Platform ukur / Live End			Stator / Paeh Tungtung
					Benang	Torsi Ketat (Nm)	Silinder pin Liang (mm)	Thread / Screw Silinder	Torsi Ketat (Nm)	Silinder pin Liang (mm)
	3A40	± 2N ± 10N ± 20N ± 50N	40 mm x 40 mm x 20 mm	alloy aluminium	thread internal 4x M3x0.5 jerona 8 mm	1	henteu	thread internal 4x M3x0.5 jerona 8 mm	1	henteu
	3A60A	± 10N ± 20N ± 50N ± 100N	60 mm x 60 mm x 25 mm	alloy aluminium	thread internal 4x M3x0.5 jerona 12 mm	1	2 x Ø2 E7 jerona 12 mm	2 x DIN EN ISO 4762 M4х0.7 6.8	2	2 x Ø3 E7 jerona 5 mm
		± 200N ± 500N		beusi sténless	thread internal 4x M3x0.5 jerona 12 mm	1	2 x Ø2 E7 jerona 12 mm	2 x DIN EN ISO 4762 M4х0.7 6.8	2	2 x Ø3 E7 jerona 5 mm
	3A120	± 50N ± 100N ± 200N ± 500N ± 1000N	120 mm x 120 mm x 30 mm	alloy aluminium	Benang internal 4x M6x1 Jerona 12 mm	10	2 x Ø5 E7 Jerona 12 mm	4 x DIN EN ISO 4762 M6х1 6.8	10	2 x Ø5 E7 jerona 3 mm
		± 1kN ± 2kN ± 5kN		beusi sténless	thread internal 4x M6x1 Jerona 12 mm	15	2 x Ø5 E7 Jerona 12 mm	4 x DIN EN ISO 4762 M6х1 10.9	15	2 x Ø5 E7 jerona 3 mm
	3A160	± 2kN ± 5kN	160 mm x 160 mm x 66 mm	pakakas baja	thread internal 4x M10x1.5 jerona 15 mm	50	2 x Ø8 H7 jerona 15 mm	4 x DIN EN ISO 4762 M12x1.75 10.9	80	2 x Ø8 H7 jerona 5 mm
		± 10kN ± 20kN ± 50kN		pakakas baja	thread internal 4x M10x1.5 jerona 15 mm	60	2 x Ø8 H7 jerona 15 mm	4 x DIN EN ISO 4762 M12x1.75 10.9	100	2 x Ø8 H7 jerona 5 mm
	3A300	± 50kN	300 mm x 300 mm x 100 mm	pakakas baja	thread internal 4x M24x3	500	5x Ø25 H7	4 x DIN EN ISO 4762 M24x3 10.9	500	2 x Ø25 H7 jerona 40 mm
		± 100kN ± 200kN				800			800
	3A400	± 500kN	400 mm x 400 mm x 100 mm	pakakas baja	thread internal 4x M30x3.5	1800	5x Ø30 E7	4 x DIN EN ISO 4762 M30x3.5 10.9	1800	2 x Ø30 E7 jerona 40 mm

Interface Nyarita.

• 7401 Wétan Buterus Girang
• Scottsdale, Arizona 85260 AS

Ngarojong

Telepon: 480.948.5555
Fax: 480.948.1924
www.interfaceforce.com

Dokumén / Sumberdaya

Interface 3A Series Multi Axis beban Sél [pdf] Instruksi Manual Seri 3A, Sél Beban Multi Axis, Sél Beban Multi Axis Series 3A, Sél Beban Axis

Rujukan

• Manual pamaké