Interface 3A Series Multi Axis Load Cells Manual Instruksi

INFORMASI INSTALASI

1. Model antarmuka 3A Series multi-axis mbukak sel kudu dipasang ing lumahing sing warata lan cukup kaku supaya ora deform appreciably ing mbukak.
2. Fasteners kudu Grade 8.8 kanggo 3A60 liwat 3A160 lan Grade 10.9 kanggo 3A300 lan 3A400
3. Sensor kudu dipasang kanthi nggunakake sekrup sing disaranake lan torsi sing dipasang ing tabel ing ngisor iki.
4. Pin dowel kudu digunakake ing kabeh permukaan sing dipasang.
5. Kanggo 3A300 lan 3A400 paling ora loro pin dowel kudu digunakake ing mburi urip. Nganti 5 bisa digunakake.
6. Kanggo sensor 500N lan ndhuwur, lapisan tipis Loctite 638 utawa padha dianjurake ing telung lumahing soyo tambah kanggo nyegah slippage.
7. Perlengkapan lan piring sing dipasang mung bisa ngubungi sensor ing permukaan sing dipasang.

Rincian MOUNTING

	Model	Rated load / Kapasitas	ukuran	Bahan	Platform pangukuran / Live End			Stator / Dead End
					Utas	Torsi Pengetatan (Nm)	Lubang pin silinder (mm)	Thread / Screw Silinder	Torsi Pengetatan (Nm)	Lubang pin silinder (mm)
	3A40	± 2N ± 10N ± 20N ± 50N	40 mm x 40 mm x 20 mm	paduan aluminium	Utas internal 4x M3x0.5 jerone 8 mm	1	ora	Utas internal 4x M3x0.5 jerone 8 mm	1	ora
	3A60A	± 10N ± 20N ± 50N ± 100N	60 mm x 60 mm x 25 mm	paduan aluminium	Utas internal 4x M3x0.5 jerone 12 mm	1	2 x Ø2 E7 jerone 12 mm	2 x DIN EN ISO 4762 M4х0.7 6.8	2	2 x Ø3 E7 jerone 5 mm
		± 200N ± 500N		baja tahan karat	Utas internal 4x M3x0.5 jerone 12 mm	1	2 x Ø2 E7 jerone 12 mm	2 x DIN EN ISO 4762 M4х0.7 6.8	2	2 x Ø3 E7 jerone 5 mm
	3A120	± 50N ± 100N ± 200N ± 500N ± 1000N	120 mm x 120 mm x 30 mm	paduan aluminium	Utas internal 4x M6x1 Ambane 12 mm	10	2 x Ø5 E7 ambane 12 mm	4 x DIN EN ISO 4762 M6х1 6.8	10	2 x Ø5 E7 jerone 3 mm
		± 1kN ± 2kN ± 5kN		baja tahan karat	Utas internal 4x M6x1 Ambane 12 mm	15	2 x Ø5 E7 ambane 12 mm	4 x DIN EN ISO 4762 M6х1 10.9	15	2 x Ø5 E7 jerone 3 mm
	3A160	± 2kN ± 5kN	160 mm x 160 mm x 66 mm	baja perkakas	Utas internal 4x M10x1.5 jerone 15 mm	50	2 x Ø8 H7 jerone 15 mm	4 x DIN EN ISO 4762 M12x1.75 10.9	80	2 x Ø8 H7 jerone 5 mm
		± 10kN ± 20kN ± 50kN		baja perkakas	Utas internal 4x M10x1.5 jerone 15 mm	60	2 x Ø8 H7 jerone 15 mm	4 x DIN EN ISO 4762 M12x1.75 10.9	100	2 x Ø8 H7 jerone 5 mm
	3A300	± 50kN	300 mm x 300 mm x 100 mm	baja perkakas	Utas internal 4x M24x3	500	5x Ø25 H7	4 x DIN EN ISO 4762 M24x3 10.9	500	2 x Ø25 H7 jerone 40 mm
		± 100kN ± 200kN				800			800
	3A400	± 500kN	400 mm x 400 mm x 100 mm	baja perkakas	Utas internal 4x M30x3.5	1800	5x Ø30 E7	4 x DIN EN ISO 4762 M30x3.5 10.9	1800	2 x Ø30 E7 jerone 40 mm

Antarmuka Inc.

• 7401 East Buttherus Drive
• Scottsdale, Arizona 85260 USA

Dhukungan

Telpon: 480.948.5555
Fax: 480.948.1924
www.interfaceforce.com

Dokumen / Sumber Daya

Antarmuka 3A Series Multi Axis Load Cells [pdf] Instruksi Manual Seri 3A, Sel Beban Sumbu Multi, Sel Beban Sumbu Multi, Sel Beban Sumbu 3A, Sel Beban Sumbu

Referensi

• Manual pangguna