Ntuziaka 3A Series Multi Axis Load Cells Ntuziaka ntuziaka

Ozi nkwụnye

1. Interface nlereanya 3A Series multi-axis ibu sel ga-n'ịnyịnya n'elu nke dị larịị na isiike zuru ezu ka ọ ghara deform appreciably n'okpuru ibu.
2. Ihe nkedo kwesịrị ịbụ ọkwa 8.8 maka 3A60 ruo 3A160 na ọkwa 10.9 maka 3A300 na 3A400
3. Ekwesịrị ịkwanye ihe mmetụta site na iji skru na-atụ aro na ịrị elu na tebụl dị n'okpuru.
4. Ekwesịrị iji ntụtụ dowel mee ihe n'ebe niile na-arịgo.
5. Maka 3A300 na 3A400 ọ dịkarịa ala abụọ dowel atụdo kwesịrị iji na njedebe ndụ. Enwere ike iji ihe ruru 5.
6. Maka sensọ 500N na n'elu, a na-atụ aro mkpuchi dị mkpa nke Loctite 638 ma ọ bụ ihe yiri ya n'elu ebe a na-ebuli elu atọ iji gbochie nkwụsị.
7. Ihe nrụnye na efere nwere ike ịkpọtụrụ ihe mmetụta naanị n'ebe mgbago egosipụtara.

NKWUO NKE MAKA

	Nlereanya	Enyere ibu/ Ike	Akụkụ	Ihe onwunwe	Ịtụ ikpo okwu / Live End			Stator / nwụrụ anwụ ọgwụgwụ
					eri	Torque na-akpachi anya (Nm)	Cylinder pin oghere (mm)	Eriri / Cylindered Screw	Torque na-akpachi anya (Nm)	Cylinder pin oghere (mm)
	3A40	±2N ±10N ±20N ±50N	40 mm x 40 mm x 20 mm	aluminum alloy	eriri ime 4x M3x0.5 omimi 8 mm	1	mba	eriri ime 4x M3x0.5 omimi 8 mm	1	mba
	3A60A	±10N ±20N ±50N ±100N	60 mm x 60 mm x 25 mm	aluminum alloy	eriri ime 4x M3x0.5 omimi 12 mm	1	2 x Ø2 E7 omimi 12 mm	2 x DIN EN ISO 4762 M4х0.7 6.8	2	2 x Ø3 E7 omimi 5 mm
		±200N ±500N		igwe anaghị agba nchara	eriri ime 4x M3x0.5 omimi 12 mm	1	2 x Ø2 E7 omimi 12 mm	2 x DIN EN ISO 4762 M4х0.7 6.8	2	2 x Ø3 E7 omimi 5 mm
	3A120	±50N ±100N ±200N ±500N ±1000N	120 mm x 120 mm x 30 mm	aluminum alloy	Eriri ime 4x M6x1 Omimi 12 mm	10	2 x Ø5 E7 Omimi 12 mm	4 x DIN EN ISO 4762 M6х1 6.8	10	2 x Ø5 E7 omimi 3 mm
		±1kN ±2kN ±5kN		igwe anaghị agba nchara	eriri ime 4x M6x1 Omimi 12 mm	15	2 x Ø5 E7 Omimi 12 mm	4 x DIN EN ISO 4762 M6х1 10.9	15	2 x Ø5 E7 omimi 3 mm
	3A160	±2kN ±5kN	160 mm x 160 mm x 66 mm	ngwá ọrụ ígwè	eriri ime 4x M10x1.5 omimi 15 mm	50	2 x Ø8 H7 omimi 15 mm	4 x DIN EN ISO 4762 M12х1.75 10.9	80	2 x Ø8 H7 omimi 5 mm
		±10kN ±20kN ±50kN		ngwá ọrụ ígwè	eriri ime 4x M10x1.5 omimi 15 mm	60	2 x Ø8 H7 omimi 15 mm	4 x DIN EN ISO 4762 M12х1.75 10.9	100	2 x Ø8 H7 omimi 5 mm
	3A300	±50kN	300 mm x 300 mm x 100 mm	ngwá ọrụ ígwè	eriri ime 4x M24x3	500	5x Ø25 H7	4 x DIN EN ISO 4762 M24х3 10.9	500	2 x Ø25 H7 omimi 40 mm
		±100kN ±200kN				800			800
	3A400	±500kN	400 mm x 400 mm x 100 mm	ngwá ọrụ ígwè	eriri ime 4x M30x3.5	1800	5x Ø30 E7	4 x DIN EN ISO 4762 M30х3.5 10.9	1800	2 x Ø30 E7 omimi 40 mm

Interface Inc.

• 7401 East Buttherus mbanye
• Scottsdale, Arizona 85260 USA

Nkwado

Ekwentị: 480.948.5555
Fax: 480.948.1924
www.interfaceforce.com

Akwụkwọ / akụrụngwa

Interface 3A Series Multi axis Load Cells [pdf] Akwụkwọ ntuziaka 3A Series, Multi Axis Load Cells, 3A Series Multi Axis Load Cells, Axis Load Cells

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ