Interface 3A Series Multi Axis Load Cells Instruction Manual

INSTALLATION INFORMATION

1. Interface modhi 3A Series akawanda-axis mutoro maseru anofanirwa kukwidzwa pamusoro penzvimbo yakati sandara uye yakaoma zvakakwana kuitira kuti isakanganisika zvakanaka pasi pemutoro.
2. Mafasteners anofanirwa kunge ari Giredhi 8.8 re3A60 thru 3A160 uye Giredhi 10.9 re3A300 uye 3A400
3. Masensa anofanirwa kukwikwidzwa uchishandisa anokurudzirwa screws uye anokwirisa torque mutafura pazasi.
4. Mapini eDowel anofanirwa kushandiswa panzvimbo dzese dzakasungirirwa.
5. Kune 3A300 uye 3A400 angangoita maviri mapini edowel anofanirwa kushandiswa pamhene. Kusvika ku5 inogona kushandiswa.
6. Kune masensa 500N uye pamusoro, iyo yakatetepa yeLoctite 638 kana yakafanana inokurudzirwa pane matatu anokwira kumusoro kudzivirira kutsvedza.
7. Kumisikidza zvigadziriso uye mahwendefa anogona chete kubata sensor panzvimbo yakaratidzwa yekukwira.

Kukwidza DZIDZO

	Model	Rated load/ Capacity	Dimensions	Material	Kuyera chikuva / Live End			Stator / Dead End
					Thread	Kusimbisa Torque (Nm)	Cylinder pin Hole (mm)	Thread / Cylindered Screw	Kusimbisa Torque (Nm)	Cylinder pin Hole (mm)
	3A40	±2N ±10N ±20N ±50N	40 mm x 40 mm x 20 mm	aluminium alloy	shinda yemukati 4x M3x0.5 kudzika 8 mm	1	Aihwa	shinda yemukati 4x M3x0.5 kudzika 8 mm	1	Aihwa
	3A60A	±10N ±20N ±50N ±100N	60 mm x 60 mm x 25 mm	aluminium alloy	shinda yemukati 4x M3x0.5 kudzika 12 mm	1	2 x Ø2 E7 kudzika 12 mm	2 x DIN EN ISO 4762 M4х0.7 6.8	2	2 x Ø3 E7 kudzika 5 mm
		±200N ±500N		simbi isina ngura	shinda yemukati 4x M3x0.5 kudzika 12 mm	1	2 x Ø2 E7 kudzika 12 mm	2 x DIN EN ISO 4762 M4х0.7 6.8	2	2 x Ø3 E7 kudzika 5 mm
	3A120	±50N ±100N ±200N ±500N ±1000N	120 mm x 120 mm x 30 mm	aluminium alloy	Mukati shinda 4x M6x1 Kudzika 12 mm	10	2 x Ø5 E7 Kudzika 12 mm	4 x DIN EN ISO 4762 M6х1 6.8	10	2 x Ø5 E7 kudzika 3 mm
		±1kN ±2kN ±5kN		simbi isina ngura	shinda yemukati 4x M6x1 Kudzika 12 mm	15	2 x Ø5 E7 Kudzika 12 mm	4 x DIN EN ISO 4762 M6х1 10.9	15	2 x Ø5 E7 kudzika 3 mm
	3A160	±2kN ±5kN	160 mm x 160 mm x 66 mm	mudziyo simbi	shinda yemukati 4x M10x1.5 kudzika 15 mm	50	2 x Ø8 H7 kudzika 15 mm	4 x DIN EN ISO 4762 M12х1.75 10.9	80	2 x Ø8 H7 kudzika 5 mm
		±10kN ±20kN ±50kN		mudziyo simbi	shinda yemukati 4x M10x1.5 kudzika 15 mm	60	2 x Ø8 H7 kudzika 15 mm	4 x DIN EN ISO 4762 M12х1.75 10.9	100	2 x Ø8 H7 kudzika 5 mm
	3A300	±50kN	300 mm x 300 mm x 100 mm	mudziyo simbi	shinda yemukati 4x M24x3	500	5x Ø25 H7	4 x DIN EN ISO 4762 M24х3 10.9	500	2 x Ø25 H7 kudzika 40 mm
		±100kN ±200kN				800			800
	3A400	±500kN	400 mm x 400 mm x 100 mm	mudziyo simbi	shinda yemukati 4x M30x3.5	1800	5x Ø30 E7	4 x DIN EN ISO 4762 M30х3.5 10.9	1800	2 x Ø30 E7 kudzika 40 mm

Iyo Interface Inc.

• 7401 East Butherus Drive
• Scottsdale, Arizona 85260 USA

Support

Runhare: 480.948.5555
Fax: 480.948.1924
www.interfaceforce.com

Zvinyorwa / Zvishandiso

Interface 3A Series Multi Axis Load Cells [pdf] Bhuku reMirayiridzo 3A Series, Multi Axis Load Cells, 3A Series Multi Axis Load Cells, Axis Load Cells

References

• User Manual