Interface 3A Series Multi Axis Load Cells Manual Instruction

KA ʻike hoʻokomo

1. Pono e kau ʻia ma luna o kahi ʻili palahalaha a ʻoʻoleʻa i ʻole e hoʻopōʻino nui ʻia ma lalo o ka ukana.
2. Pono ka papa 8.8 no 3A60 ma o 3A160 a me ka Papa 10.9 no 3A300 a me 3A400.
3. Pono e kau ʻia nā sensor me ka hoʻohana ʻana i nā wili i ʻōlelo ʻia a me nā torque kau ʻana ma ka papa ma lalo.
4. Pono e hoʻohana ʻia nā pine dowel ma nā wahi kau a pau.
5. No 3A300 a me 3A400 ma ka liʻiliʻi ʻelua mau pine dowel e hoʻohana ʻia ma ka hopena ola. Hiki ke hoʻohana ʻia a hiki i 5.
6. No nā mea ʻike 500N a ʻoi aʻe, ua ʻōlelo ʻia kahi uhi lahilahi o Loctite 638 a i ʻole like ma nā ʻaoʻao kau ʻekolu e pale ai i ka paheʻe.
7. Hiki ke hoʻopili wale ʻia nā mea kau kau a me nā papa i ka mea ʻike ma nā wahi kau i hōʻike ʻia.

HUAKAI KUMU

	Hoʻohālike	Haawe i kohoia	Anana	Mea waiwai	Ana ʻana i ke kahua / Hoʻopau Ola			Stator / Hopena Make
					Loko	ʻO ka Torque Hoʻopaʻa (Nm)	Puka paʻi pahu (mm)	Uila / Cylindered Screw	ʻO ka Torque Hoʻopaʻa (Nm)	Puka paʻi pahu (mm)
	3A40	±2N ±10N ±20N ±50N	40 mm x 40 mm x 20 mm	alumini alumini	pae loko 4x M3x0.5 hohonu 8 mm o	1	ʻAʻole	pae loko 4x M3x0.5 hohonu 8 mm o	1	ʻAʻole
	3A60A	±10N ±20N ±50N ±100N	60 mm x 60 mm x 25 mm	alumini alumini	pae loko 4x M3x0.5 hohonu 12 mm o	1	2 x Ø2 E7 hohonu 12 mm o	2 x DIN EN ISO 4762 M4х0.7 6.8	2	2 x Ø3 E7 hohonu 5 mm o
		±200N ±500N		kila kohu ʻole	pae loko 4x M3x0.5 hohonu 12 mm o	1	2 x Ø2 E7 hohonu 12 mm o	2 x DIN EN ISO 4762 M4х0.7 6.8	2	2 x Ø3 E7 hohonu 5 mm o
	3A120	±50N ±100N ±200N ±500N ±1000N	120 mm x 120 mm x 30 mm	alumini alumini	Loko loko 4x M6x1 Hohonu 12 mm	10	2 x Ø5 E7 Ka hohonu 12 mm	4 x DIN EN ISO 4762 M6х1 6.8	10	2 x Ø5 E7 hohonu 3 mm o
		±1kN ±2kN ±5kN		kila kohu ʻole	milo loko 4x M6x1 Ka hohonu 12 mm	15	2 x Ø5 E7 Ka hohonu 12 mm	4 x DIN EN ISO 4762 M6х1 10.9	15	2 x Ø5 E7 hohonu 3 mm o
	3A160	±2kN ±5kN	160 mm x 160 mm x 66 mm	kila kila	pae loko 4x M10x1.5 hohonu 15 mm o	50	2 x Ø8 H7 hohonu 15 mm o	4 x DIN EN ISO 4762 M12х1.75 10.9	80	2 x Ø8 H7 hohonu 5 mm o
		±10kN ±20kN ±50kN		kila kila	pae loko 4x M10x1.5 hohonu 15 mm o	60	2 x Ø8 H7 hohonu 15 mm o	4 x DIN EN ISO 4762 M12х1.75 10.9	100	2 x Ø8 H7 hohonu 5 mm o
	3A300	±50kN	300 mm x 300 mm x 100 mm	kila kila	pae loko 4x M24x3	500	5x Ø25 H7	4 x DIN EN ISO 4762 M24х3 10.9	500	2 x Ø25 H7 hohonu 40 mm o
		±100kN ±200kN				800			800
	3A400	±500kN	400 mm x 400 mm x 100 mm	kila kila	pae loko 4x M30x3.5	1800	5x Ø30 E7	4 x DIN EN ISO 4762 M30х3.5 10.9	1800	2 x Ø30 E7 hohonu 40 mm o

Interface Inc.

• 7401 Hikina Buterus Drive
• Scottsdale, Arizona 85260 USA

Kākoʻo

Kelepona: 480.948.5555
Fax: 480.948.1924
www.interfaceforce.com

Palapala / Punawai

Nā Pūnaehana Hoʻouka Axis Nui i ka Interface 3A Series [pdf] Palapala Aʻo Māhele 3A, Nā Pūnaehana Hoʻouka Axis Nui, Nā Pūnaewele Hoʻouka Axis Nui 3A, Nā Pūnaewele Hoʻouka Axis

Nā kuhikuhi

• Palapala Hoʻohana